From 23c779b9f9161d6568d3b2fca06e70ad182c480c Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 11 Jun 2015 17:37:04 -0700 Subject: regulator: Add pull down support Some regulators need to be configured to pull down a resistor when the regulator is disabled. Add an op (set_pull_down) and a DT property + constraint to support this. Signed-off-by: Stephen Boyd Signed-off-by: Mark Brown --- drivers/regulator/core.c | 8 ++++++++ drivers/regulator/of_regulator.c | 2 ++ 2 files changed, 10 insertions(+) (limited to 'drivers/regulator') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c8d5e2b05fdf..60fcfba52592 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1051,6 +1051,14 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + if (rdev->constraints->pull_down && ops->set_pull_down) { + ret = ops->set_pull_down(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to set pull down\n"); + goto out; + } + } + print_constraints(rdev); return 0; out: diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 482a86f90839..c3433db0acda 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -67,6 +67,8 @@ static void of_get_regulation_constraints(struct device_node *np, if (!constraints->always_on) /* status change should be possible. */ constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS; + constraints->pull_down = of_property_read_bool(np, "regulator-pull-down"); + if (of_property_read_bool(np, "regulator-allow-bypass")) constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS; -- cgit v1.2.3