From e350cd1d9308b67363ebb870a678a1fd807df1a6 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Wed, 3 Jul 2013 15:08:48 -0700 Subject: rapidio/switches: remove tsi500 driver Remove the driver for Tsi500 Parallel RapidIO switch because this device has not been available for several years. Since the first introduction of Tsi500, the parallel RapidIO interface was replaced by the serial RapidIO (sRIO) and therefore there is no value in keeping this driver. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/switches/Kconfig | 7 ---- drivers/rapidio/switches/Makefile | 1 - drivers/rapidio/switches/tsi500.c | 78 --------------------------------------- 3 files changed, 86 deletions(-) delete mode 100644 drivers/rapidio/switches/tsi500.c (limited to 'drivers/rapidio/switches') diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig index f47fee5d4563..62d4a065230f 100644 --- a/drivers/rapidio/switches/Kconfig +++ b/drivers/rapidio/switches/Kconfig @@ -26,10 +26,3 @@ config RAPIDIO_CPS_GEN2 default n ---help--- Includes support for ITD CPS Gen.2 serial RapidIO switches. - -config RAPIDIO_TSI500 - bool "Tsi500 Parallel RapidIO switch support" - depends on RAPIDIO - default n - ---help--- - Includes support for IDT Tsi500 parallel RapidIO switch. diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile index c4d3acc3c715..051cc6b38188 100644 --- a/drivers/rapidio/switches/Makefile +++ b/drivers/rapidio/switches/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o -obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o diff --git a/drivers/rapidio/switches/tsi500.c b/drivers/rapidio/switches/tsi500.c deleted file mode 100644 index 914eddd5aa42..000000000000 --- a/drivers/rapidio/switches/tsi500.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * RapidIO Tsi500 switch support - * - * Copyright 2009-2010 Integrated Device Technology, Inc. - * Alexandre Bounine - * - Modified switch operations initialization. - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include "../rio.h" - -static int -tsi500_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port) -{ - int i; - u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3); - u32 result; - - if (table == 0xff) { - rio_mport_read_config_32(mport, destid, hopcount, offset, &result); - result &= ~(0xf << (4*(route_destid & 0x7))); - for (i=0;i<4;i++) - rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*i), result | (route_port << (4*(route_destid & 0x7)))); - } - else { - rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result); - result &= ~(0xf << (4*(route_destid & 0x7))); - rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*table), result | (route_port << (4*(route_destid & 0x7)))); - } - - return 0; -} - -static int -tsi500_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 *route_port) -{ - int ret = 0; - u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3); - u32 result; - - if (table == 0xff) - rio_mport_read_config_32(mport, destid, hopcount, offset, &result); - else - rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result); - - result &= 0xf << (4*(route_destid & 0x7)); - *route_port = result >> (4*(route_destid & 0x7)); - if (*route_port > 3) - ret = -1; - - return ret; -} - -static int tsi500_switch_init(struct rio_dev *rdev, int do_enum) -{ - pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = tsi500_route_add_entry; - rdev->rswitch->get_entry = tsi500_route_get_entry; - rdev->rswitch->clr_table = NULL; - rdev->rswitch->set_domain = NULL; - rdev->rswitch->get_domain = NULL; - rdev->rswitch->em_init = NULL; - rdev->rswitch->em_handle = NULL; - - return 0; -} - -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_switch_init); -- cgit v1.2.3