From 6a230edd5d6e02655ad3a7ac718f521e96b9830c Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 26 Jun 2018 16:06:13 +0200 Subject: pinctrl: armada-37xx: add suspend/resume support Add suspend/resume hooks in pinctrl driver to handle S2RAM operations. Beyond the traditional register save/restore operations, these hooks also keep the GPIOs used for both-edge IRQ synchronized between their level (low/high) and expected IRQ polarity (falling/rising edge). Since pinctrl is an infrastructure module, its resume should be issued prior to other IO drivers. The pinctrl PM operations are requested at early/late stages for this reason. Suggested-by: Ken Ma Signed-off-by: Miquel Raynal Reviewed-by: Gregory CLEMENT Signed-off-by: Linus Walleij --- drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 118 ++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) (limited to 'drivers/pinctrl') diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c index 53cf800688e9..aa48b3f23c7f 100644 --- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c @@ -80,6 +80,18 @@ struct armada_37xx_pmx_func { unsigned int ngroups; }; +struct armada_37xx_pm_state { + u32 out_en_l; + u32 out_en_h; + u32 out_val_l; + u32 out_val_h; + u32 irq_en_l; + u32 irq_en_h; + u32 irq_pol_l; + u32 irq_pol_h; + u32 selection; +}; + struct armada_37xx_pinctrl { struct regmap *regmap; void __iomem *base; @@ -94,6 +106,7 @@ struct armada_37xx_pinctrl { unsigned int ngroups; struct armada_37xx_pmx_func *funcs; unsigned int nfuncs; + struct armada_37xx_pm_state pm; }; #define PIN_GRP(_name, _start, _nr, _mask, _func1, _func2) \ @@ -996,6 +1009,110 @@ static int armada_37xx_pinctrl_register(struct platform_device *pdev, return 0; } +#if defined(CONFIG_PM) +static int armada_3700_pinctrl_suspend(struct device *dev) +{ + struct armada_37xx_pinctrl *info = dev_get_drvdata(dev); + + /* Save GPIO state */ + regmap_read(info->regmap, OUTPUT_EN, &info->pm.out_en_l); + regmap_read(info->regmap, OUTPUT_EN + sizeof(u32), &info->pm.out_en_h); + regmap_read(info->regmap, OUTPUT_VAL, &info->pm.out_val_l); + regmap_read(info->regmap, OUTPUT_VAL + sizeof(u32), + &info->pm.out_val_h); + + info->pm.irq_en_l = readl(info->base + IRQ_EN); + info->pm.irq_en_h = readl(info->base + IRQ_EN + sizeof(u32)); + info->pm.irq_pol_l = readl(info->base + IRQ_POL); + info->pm.irq_pol_h = readl(info->base + IRQ_POL + sizeof(u32)); + + /* Save pinctrl state */ + regmap_read(info->regmap, SELECTION, &info->pm.selection); + + return 0; +} + +static int armada_3700_pinctrl_resume(struct device *dev) +{ + struct armada_37xx_pinctrl *info = dev_get_drvdata(dev); + struct gpio_chip *gc; + struct irq_domain *d; + int i; + + /* Restore GPIO state */ + regmap_write(info->regmap, OUTPUT_EN, info->pm.out_en_l); + regmap_write(info->regmap, OUTPUT_EN + sizeof(u32), + info->pm.out_en_h); + regmap_write(info->regmap, OUTPUT_VAL, info->pm.out_val_l); + regmap_write(info->regmap, OUTPUT_VAL + sizeof(u32), + info->pm.out_val_h); + + /* + * Input levels may change during suspend, which is not monitored at + * that time. GPIOs used for both-edge IRQs may not be synchronized + * anymore with their polarities (rising/falling edge) and must be + * re-configured manually. + */ + gc = &info->gpio_chip; + d = gc->irq.domain; + for (i = 0; i < gc->ngpio; i++) { + u32 irq_bit = BIT(i % GPIO_PER_REG); + u32 mask, *irq_pol, input_reg, virq, type, level; + + if (i < GPIO_PER_REG) { + mask = info->pm.irq_en_l; + irq_pol = &info->pm.irq_pol_l; + input_reg = INPUT_VAL; + } else { + mask = info->pm.irq_en_h; + irq_pol = &info->pm.irq_pol_h; + input_reg = INPUT_VAL + sizeof(u32); + } + + if (!(mask & irq_bit)) + continue; + + virq = irq_find_mapping(d, i); + type = irq_get_trigger_type(virq); + + /* + * Synchronize level and polarity for both-edge irqs: + * - a high input level expects a falling edge, + * - a low input level exepects a rising edge. + */ + if ((type & IRQ_TYPE_SENSE_MASK) == + IRQ_TYPE_EDGE_BOTH) { + regmap_read(info->regmap, input_reg, &level); + if ((*irq_pol ^ level) & irq_bit) + *irq_pol ^= irq_bit; + } + } + + writel(info->pm.irq_en_l, info->base + IRQ_EN); + writel(info->pm.irq_en_h, info->base + IRQ_EN + sizeof(u32)); + writel(info->pm.irq_pol_l, info->base + IRQ_POL); + writel(info->pm.irq_pol_h, info->base + IRQ_POL + sizeof(u32)); + + /* Restore pinctrl state */ + regmap_write(info->regmap, SELECTION, info->pm.selection); + + return 0; +} + +/* + * Since pinctrl is an infrastructure module, its resume should be issued prior + * to other IO drivers. + */ +static const struct dev_pm_ops armada_3700_pinctrl_pm_ops = { + .suspend_late = armada_3700_pinctrl_suspend, + .resume_early = armada_3700_pinctrl_resume, +}; + +#define PINCTRL_ARMADA_37XX_DEV_PM_OPS (&armada_3700_pinctrl_pm_ops) +#else +#define PINCTRL_ARMADA_37XX_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + static const struct of_device_id armada_37xx_pinctrl_of_match[] = { { .compatible = "marvell,armada3710-sb-pinctrl", @@ -1049,6 +1166,7 @@ static struct platform_driver armada_37xx_pinctrl_driver = { .driver = { .name = "armada-37xx-pinctrl", .of_match_table = armada_37xx_pinctrl_of_match, + .pm = PINCTRL_ARMADA_37XX_DEV_PM_OPS, }, }; -- cgit v1.2.3