From 3153fa38e38af566cf6454a03b1dbadaf6f323c0 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Wed, 16 Feb 2022 15:12:57 +0800 Subject: phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure}) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the comment of the function phy_mipi_dphy_get_default_config(), it uses minimum D-PHY timings based on MIPI D-PHY specification. They are derived from the valid ranges specified in Section 6.9, Table 14, Page 41 of the D-PHY specification (v1.2). The table 14 explicitly mentions that the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and 'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that the minimum values are 50000 picoseconds and @lpx picoseconds respectively. Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx, which hints the same minimum values. Without this patch, the function phy_mipi_dphy_get_default_config() wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx. So, let's correct them to 50000 picoseconds and cfg->lpx respectively. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: dddc97e82303 ("phy: dphy: Add configuration helpers") Cc: Andrzej Hajda Cc: Neil Armstrong Cc: Laurent Pinchart Cc: Kishon Vijay Abraham I Cc: Vinod Koul Cc: Heiko Stuebner Cc: Maxime Ripard Cc: Guido Günther Signed-off-by: Liu Ying Link: https://lore.kernel.org/r/20220216071257.1647703-1-victor.liu@nxp.com Signed-off-by: Vinod Koul --- drivers/phy/phy-core-mipi-dphy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/phy/phy-core-mipi-dphy.c') diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c index ccb4045685cd..929e86d6558e 100644 --- a/drivers/phy/phy-core-mipi-dphy.c +++ b/drivers/phy/phy-core-mipi-dphy.c @@ -64,10 +64,10 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock, cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui); cfg->init = 100; - cfg->lpx = 60000; + cfg->lpx = 50000; cfg->ta_get = 5 * cfg->lpx; cfg->ta_go = 4 * cfg->lpx; - cfg->ta_sure = 2 * cfg->lpx; + cfg->ta_sure = cfg->lpx; cfg->wakeup = 1000; cfg->hs_clk_rate = hs_clk_rate; -- cgit v1.2.3