From d0bffd17a3fc49396518591eae42580530aecd25 Mon Sep 17 00:00:00 2001 From: Jianguo Sun Date: Wed, 24 Jan 2018 13:47:37 +0800 Subject: phy: add combo phy driver for HiSilicon STB SoCs Add combo phy driver for HiSilicon STB SoCs. This phy can be used as pcie-phy, sata-phy or usb-phy. Changes for v5: - Add bindings doc for Hi3798CV200 peripheral controller, and refer to the bindings of this parent node in combphy bindings doc. Changes for v4: - Instead of relying on device id, add a new property hisilicon,fixed-mode for combphy device that doesn't support mode select but a fixed phy mode. - Move combphy mode select register bits definition to device tree, as it may vary from one device to another. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration registers. - Kill "hisilicon,peripheral-syscon" property, since parent node is just the syscon controller now. - Check combphy id to handle the quirk that combphy0 can not configure mode but always works in USB3 mode. - Unify phy .init and .exit hooks for different combphy instances and work modes, as the only quirk we need to handle is that combphy0 can only work in USB3 mode. - Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to 'por_rst'. Changes for v2: - Move DT bindings into a separate patch. - Drop the spurious newline from drivers/phy/Makefile. - Use the phy type defines in dt-bindings/phy/phy.h. - Use PTR_ERR_OR_ZERO() for checking return from devm_of_phy_provider_register(). - Add USB3 phy support. Signed-off-by: Jianguo Sun Signed-off-by: Shawn Guo Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/hisilicon/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/phy/hisilicon/Kconfig') diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index 6164c4cd0f65..d9afe2b12827 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -11,6 +11,15 @@ config PHY_HI6220_USB To compile this driver as a module, choose M here. +config PHY_HISTB_COMBPHY + tristate "HiSilicon STB SoCs COMBPHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON STB SoCs COMBPHY. + If unsure, say N. + config PHY_HIX5HD2_SATA tristate "HIX5HD2 SATA PHY Driver" depends on ARCH_HIX5HD2 && OF && HAS_IOMEM -- cgit v1.2.3 From bb0e500bedb8aaab986878aa90b99582d201576c Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 6 Mar 2018 20:18:49 +0900 Subject: phy: add 'depends on HAS_IOMEM' to fix unmet dependency These configs select MFD_SYSCON, but do not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/hisilicon/Kconfig | 1 + drivers/phy/ralink/Kconfig | 1 + drivers/phy/rockchip/Kconfig | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers/phy/hisilicon/Kconfig') diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index d9afe2b12827..5458e6c9b230 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -4,6 +4,7 @@ config PHY_HI6220_USB tristate "hi6220 USB PHY support" depends on (ARCH_HISI && ARM64) || COMPILE_TEST + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig index b17635b407bc..14fd219535ef 100644 --- a/drivers/phy/ralink/Kconfig +++ b/drivers/phy/ralink/Kconfig @@ -4,6 +4,7 @@ config PHY_RALINK_USB tristate "Ralink USB PHY driver" depends on RALINK || COMPILE_TEST + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index f5325b2b679e..0e15119ddfc6 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -29,6 +29,7 @@ config PHY_ROCKCHIP_INNO_USB2 config PHY_ROCKCHIP_PCIE tristate "Rockchip PCIe PHY Driver" depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help -- cgit v1.2.3 From ba8b0ee81fbbc249e60f84bf097bd56e8047c742 Mon Sep 17 00:00:00 2001 From: Pengcheng Li Date: Fri, 9 Mar 2018 22:47:01 +0800 Subject: phy: add inno-usb2-phy driver for hi3798cv200 SoC It adds inno-usb2-phy driver for hi3798cv200 SoC USB 2.0 support. One inno-usb2-phy device can support up to two PHY ports. While there is device level reference clock and power reset to be controlled, each PHY port has its own utmi reset that needs to assert/de-assert as needed. Hi3798cv200 needs to access PHY port0 register via particular peripheral syscon controller register to control PHY, like turning on PHY clock. Signed-off-by: Pengcheng Li Signed-off-by: Jiancheng Xue Signed-off-by: Shawn Guo Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/hisilicon/Kconfig | 10 ++ drivers/phy/hisilicon/Makefile | 1 + drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 197 +++++++++++++++++++++++++++++ 3 files changed, 208 insertions(+) create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c (limited to 'drivers/phy/hisilicon/Kconfig') diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index 5458e6c9b230..b40ee54a1a50 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -21,6 +21,16 @@ config PHY_HISTB_COMBPHY Enable this to support the HISILICON STB SoCs COMBPHY. If unsure, say N. +config PHY_HISI_INNO_USB2 + tristate "HiSilicon INNO USB2 PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Support for INNO USB2 PHY on HiSilicon SoCs. This Phy supports + USB 1.5Mb/s, USB 12Mb/s, USB 480Mb/s speeds. It supports one + USB host port to accept one USB device. + config PHY_HIX5HD2_SATA tristate "HIX5HD2 SATA PHY Driver" depends on ARCH_HIX5HD2 && OF && HAS_IOMEM diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile index 5e8e2dfa8c37..f662a4fe18d8 100644 --- a/drivers/phy/hisilicon/Makefile +++ b/drivers/phy/hisilicon/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o +obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c new file mode 100644 index 000000000000..524381249a2b --- /dev/null +++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c @@ -0,0 +1,197 @@ +/* + * HiSilicon INNO USB2 PHY Driver. + * + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include + +#define INNO_PHY_PORT_NUM 2 +#define REF_CLK_STABLE_TIME 100 /* unit:us */ +#define UTMI_CLK_STABLE_TIME 200 /* unit:us */ +#define TEST_CLK_STABLE_TIME 2 /* unit:ms */ +#define PHY_CLK_STABLE_TIME 2 /* unit:ms */ +#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */ +#define POR_RST_COMPLETE_TIME 300 /* unit:us */ +#define PHY_TEST_DATA GENMASK(7, 0) +#define PHY_TEST_ADDR GENMASK(15, 8) +#define PHY_TEST_PORT GENMASK(18, 16) +#define PHY_TEST_WREN BIT(21) +#define PHY_TEST_CLK BIT(22) /* rising edge active */ +#define PHY_TEST_RST BIT(23) /* low active */ +#define PHY_CLK_ENABLE BIT(2) + +struct hisi_inno_phy_port { + struct reset_control *utmi_rst; + struct hisi_inno_phy_priv *priv; +}; + +struct hisi_inno_phy_priv { + void __iomem *mmio; + struct clk *ref_clk; + struct reset_control *por_rst; + struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM]; +}; + +static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv, + u8 port, u32 addr, u32 data) +{ + void __iomem *reg = priv->mmio; + u32 val; + + val = (data & PHY_TEST_DATA) | + ((addr << 8) & PHY_TEST_ADDR) | + ((port << 16) & PHY_TEST_PORT) | + PHY_TEST_WREN | PHY_TEST_RST; + writel(val, reg); + + val |= PHY_TEST_CLK; + writel(val, reg); + + val &= ~PHY_TEST_CLK; + writel(val, reg); +} + +static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv) +{ + /* The phy clk is controlled by the port0 register 0x06. */ + hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE); + msleep(PHY_CLK_STABLE_TIME); +} + +static int hisi_inno_phy_init(struct phy *phy) +{ + struct hisi_inno_phy_port *port = phy_get_drvdata(phy); + struct hisi_inno_phy_priv *priv = port->priv; + int ret; + + ret = clk_prepare_enable(priv->ref_clk); + if (ret) + return ret; + udelay(REF_CLK_STABLE_TIME); + + reset_control_deassert(priv->por_rst); + udelay(POR_RST_COMPLETE_TIME); + + /* Set up phy registers */ + hisi_inno_phy_setup(priv); + + reset_control_deassert(port->utmi_rst); + udelay(UTMI_RST_COMPLETE_TIME); + + return 0; +} + +static int hisi_inno_phy_exit(struct phy *phy) +{ + struct hisi_inno_phy_port *port = phy_get_drvdata(phy); + struct hisi_inno_phy_priv *priv = port->priv; + + reset_control_assert(port->utmi_rst); + reset_control_assert(priv->por_rst); + clk_disable_unprepare(priv->ref_clk); + + return 0; +} + +static const struct phy_ops hisi_inno_phy_ops = { + .init = hisi_inno_phy_init, + .exit = hisi_inno_phy_exit, + .owner = THIS_MODULE, +}; + +static int hisi_inno_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct hisi_inno_phy_priv *priv; + struct phy_provider *provider; + struct device_node *child; + struct resource *res; + int i = 0; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + priv->ref_clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->ref_clk)) + return PTR_ERR(priv->ref_clk); + + priv->por_rst = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(priv->por_rst)) + return PTR_ERR(priv->por_rst); + + for_each_child_of_node(np, child) { + struct reset_control *rst; + struct phy *phy; + + rst = of_reset_control_get_exclusive(child, NULL); + if (IS_ERR(rst)) + return PTR_ERR(rst); + priv->ports[i].utmi_rst = rst; + priv->ports[i].priv = priv; + + phy = devm_phy_create(dev, child, &hisi_inno_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, &priv->ports[i]); + i++; + + if (i > INNO_PHY_PORT_NUM) { + dev_warn(dev, "Support %d ports in maximum\n", i); + break; + } + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id hisi_inno_phy_of_match[] = { + { .compatible = "hisilicon,inno-usb2-phy", }, + { .compatible = "hisilicon,hi3798cv200-usb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match); + +static struct platform_driver hisi_inno_phy_driver = { + .probe = hisi_inno_phy_probe, + .driver = { + .name = "hisi-inno-phy", + .of_match_table = hisi_inno_phy_of_match, + } +}; +module_platform_driver(hisi_inno_phy_driver); + +MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3