From 76e67e9e0f0f2debf9df192502a759bdd0cb4dab Mon Sep 17 00:00:00 2001 From: Ali Saidi Date: Thu, 12 Sep 2019 16:00:40 +0300 Subject: PCI: Add ACS quirk for Amazon Annapurna Labs root ports The Amazon's Annapurna Labs root ports don't advertise an ACS capability, but they don't allow peer-to-peer transactions and do validate bus numbers through the SMMU. Additionally, it's not possible for one RP to pass traffic to another RP. Signed-off-by: Ali Saidi Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Gustavo Pimentel Reviewed-by: Andrew Murray Acked-by: Bjorn Helgaas --- drivers/pci/quirks.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/pci/quirks.c') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 208aacf39329..e96c03b4e494 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4366,6 +4366,24 @@ static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags) return ret; } +static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags) +{ + if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) + return -ENOTTY; + + /* + * Amazon's Annapurna Labs root ports don't include an ACS capability, + * but do include ACS-like functionality. The hardware doesn't support + * peer-to-peer transactions via the root port and each has a unique + * segment number. + * + * Additionally, the root ports cannot send traffic to each other. + */ + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); + + return acs_flags ? 0 : 1; +} + /* * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2, @@ -4559,6 +4577,8 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs }, { PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs }, { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs }, + /* Amazon Annapurna Labs */ + { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs }, { 0 } }; -- cgit v1.2.3 From 738cb37b013e5ba6abd725a22abbd8baebc95082 Mon Sep 17 00:00:00 2001 From: Jonathan Chocron Date: Thu, 12 Sep 2019 16:00:42 +0300 Subject: PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: SError Interrupt on CPU2, code 0xbf000000 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __pci_enable_msix_range+0x4e4/0x608 lr : __pci_enable_msix_range+0x498/0x608 sp : ffffff80117db700 x29: ffffff80117db700 x28: 0000000000000001 x27: 0000000000000001 x26: 0000000000000000 x25: ffffffd3e9d8c0b0 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 x20: 0000000000000000 x19: ffffffd3e9d8c000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80116496c8 x14: ffffffd3e9844503 x13: ffffffd3e9844502 x12: 0000000000000038 x11: ffffffffffffff00 x10: 0000000000000040 x9 : ffffff801165e270 x8 : ffffff801165e268 x7 : 0000000000000002 x6 : 00000000000000b2 x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffd3e9844680 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xa8/0xcc panic+0x140/0x334 nmi_panic+0x6c/0x70 arm64_serror_panic+0x74/0x88 __pte_error+0x0/0x28 el1_error+0x84/0xf8 __pci_enable_msix_range+0x4e4/0x608 pci_alloc_irq_vectors_affinity+0xdc/0x150 pcie_port_device_register+0x2b8/0x4e0 pcie_portdrv_probe+0x34/0xf0 Notice that this quirk also disables MSI (which may work, but hasn't been tested nor has a current use case), since currently there is no standard way to disable only MSI-X. Signed-off-by: Jonathan Chocron Signed-off-by: Lorenzo Pieralisi Reviewed-by: Gustavo Pimentel Reviewed-by: Andrew Murray --- drivers/pci/quirks.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/pci/quirks.c') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e96c03b4e494..44524d351a26 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2925,6 +2925,24 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, quirk_msi_intx_disable_qca_bug); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, quirk_msi_intx_disable_qca_bug); + +/* + * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it + * should be disabled on platforms where the device (mistakenly) advertises it. + * + * Notice that this quirk also disables MSI (which may work, but hasn't been + * tested), since currently there is no standard way to disable only MSI-X. + * + * The 0031 device id is reused for other non Root Port device types, + * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class. + */ +static void quirk_al_msi_disable(struct pci_dev *dev) +{ + dev->no_msi = 1; + pci_warn(dev, "Disabling MSI/MSI-X\n"); +} +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, + PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable); #endif /* CONFIG_PCI_MSI */ /* -- cgit v1.2.3