From bbe54ea5330d828cc396d451c0e1e5c3f9764c1e Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 31 Jan 2019 20:07:46 +0300 Subject: PCI: pciehp: Disable Data Link Layer State Changed event on suspend Commit 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") tried to solve an issue where the hierarchy immediately wakes up when it is transitioned into D3cold. However, it turns out to prevent PME propagation on some systems that do not support D3cold. I looked more closely at what might cause the immediate wakeup. It happens when the ACPI power resource of the root port is turned off. The AML code associated with the _OFF() method of the ACPI power resource starts a PCIe L2/L3 Ready transition and waits for it to complete. Right after the L2/L3 Ready transition is started the root port receives a PME from the downstream port. The simplest hierarchy where this happens looks like this: 00:1d.0 PCIe Root Port ^ | v 05:00.0 PCIe switch #1 upstream port 06:01.0 PCIe switch #1 downstream hotplug port ^ | v 08:00.0 PCIe switch #2 upstream port It seems that the PCIe link between the two switches, before PME_Turn_Off/PME_TO_Ack is complete for the whole hierarchy, goes inactive and triggers PME towards the root port bringing it back to D0. The L2/L3 Ready sequence is described in PCIe r4.0 spec sections 5.2 and 5.3.3 but unfortunately they do not state what happens if DLLSCE is enabled during the sequence. Disabling Data Link Layer State Changed event (DLLSCE) seems to prevent the issue and still allows the downstream hotplug port to notice when a device is plugged/unplugged. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202593 Fixes: 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") Signed-off-by: Mika Westerberg Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v4.20+ --- drivers/pci/hotplug/pciehp_hpc.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers/pci/hotplug') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 7dd443aea5a5..c0fb64ace05a 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -736,12 +736,25 @@ void pcie_clear_hotplug_events(struct controller *ctrl) void pcie_enable_interrupt(struct controller *ctrl) { - pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_HPIE, PCI_EXP_SLTCTL_HPIE); + u16 mask; + + mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE; + pcie_write_cmd(ctrl, mask, mask); } void pcie_disable_interrupt(struct controller *ctrl) { - pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_HPIE); + u16 mask; + + /* + * Mask hot-plug interrupt to prevent it triggering immediately + * when the link goes inactive (we still get PME when any of the + * enabled events is detected). Same goes with Link Layer State + * changed event which generates PME immediately when the link goes + * inactive so mask it as well. + */ + mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE; + pcie_write_cmd(ctrl, 0, mask); } /* -- cgit v1.2.3