From d98ce9fef73d74fa8b1301a9da3fb95ae0a1536f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:15 +0100 Subject: parport: fix if-statement empty body warnings Eliminate warnings by using pr_debug which is the more typical kernel debugging style and also enable dynamic_debug on these outputs. Miscellaneous: o A few messages were logged at KERN_INFO when enabled, now KERN_DEBUG o Convert %d/%d to %zd/%zu to avoid compilation warnings Original-patch-by: Randy Dunlap Signed-off-by: Joe Perches Acked-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/ieee1284.c | 90 ++++++++++++++++-------------------------- drivers/parport/ieee1284_ops.c | 67 +++++++++++-------------------- 2 files changed, 57 insertions(+), 100 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c index 90fb73575495..ba562bcd4b80 100644 --- a/drivers/parport/ieee1284.c +++ b/drivers/parport/ieee1284.c @@ -31,12 +31,6 @@ #undef DEBUG /* Don't want a garbled console */ #endif -#ifdef DEBUG -#define DPRINTK(stuff...) printk (stuff) -#else -#define DPRINTK(stuff...) -#endif - /* Make parport_wait_peripheral wake up. * It will be useful to call this from an interrupt handler. */ static void parport_ieee1284_wakeup (struct parport *port) @@ -258,12 +252,11 @@ static void parport_ieee1284_terminate (struct parport *port) PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) - DPRINTK (KERN_INFO "%s: Timeout at event 49\n", + pr_debug("%s: Timeout at event 49\n", port->name); parport_data_forward (port); - DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n", - port->name); + pr_debug("%s: ECP direction: forward\n", port->name); port->ieee1284.phase = IEEE1284_PH_FWD_IDLE; } @@ -281,8 +274,7 @@ static void parport_ieee1284_terminate (struct parport *port) /* Event 24: nAck goes low */ r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0); if (r) - DPRINTK (KERN_INFO "%s: Timeout at event 24\n", - port->name); + pr_debug("%s: Timeout at event 24\n", port->name); /* Event 25: Set nAutoFd low */ parport_frob_control (port, @@ -294,8 +286,7 @@ static void parport_ieee1284_terminate (struct parport *port) PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); if (r) - DPRINTK (KERN_INFO "%s: Timeout at event 27\n", - port->name); + pr_debug("%s: Timeout at event 27\n", port->name); /* Event 29: Set nAutoFd high */ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0); @@ -304,8 +295,7 @@ static void parport_ieee1284_terminate (struct parport *port) port->ieee1284.mode = IEEE1284_MODE_COMPAT; port->ieee1284.phase = IEEE1284_PH_FWD_IDLE; - DPRINTK (KERN_DEBUG "%s: In compatibility (forward idle) mode\n", - port->name); + pr_debug("%s: In compatibility (forward idle) mode\n", port->name); } #endif /* IEEE1284 support */ @@ -406,8 +396,7 @@ int parport_negotiate (struct parport *port, int mode) PARPORT_CONTROL_SELECT | PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_SELECT); - DPRINTK (KERN_DEBUG - "%s: Peripheral not IEEE1284 compliant (0x%02X)\n", + pr_debug("%s: Peripheral not IEEE1284 compliant (0x%02X)\n", port->name, parport_read_status (port)); port->ieee1284.phase = IEEE1284_PH_FWD_IDLE; return -1; /* Not IEEE1284 compliant */ @@ -430,8 +419,7 @@ int parport_negotiate (struct parport *port, int mode) PARPORT_STATUS_ACK, PARPORT_STATUS_ACK)) { /* This shouldn't really happen with a compliant device. */ - DPRINTK (KERN_DEBUG - "%s: Mode 0x%02x not supported? (0x%02x)\n", + pr_debug("%s: Mode 0x%02x not supported? (0x%02x)\n", port->name, mode, port->ops->read_status (port)); parport_ieee1284_terminate (port); return 1; @@ -442,7 +430,7 @@ int parport_negotiate (struct parport *port, int mode) /* xflag should be high for all modes other than nibble (0). */ if (mode && !xflag) { /* Mode not supported. */ - DPRINTK (KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n", + pr_debug("%s: Mode 0x%02x rejected by peripheral\n", port->name, mode); parport_ieee1284_terminate (port); return 1; @@ -463,9 +451,7 @@ int parport_negotiate (struct parport *port, int mode) /* Event 52: nAck goes low */ if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) { /* This peripheral is _very_ slow. */ - DPRINTK (KERN_DEBUG - "%s: Event 52 didn't happen\n", - port->name); + pr_debug("%s: Event 52 didn't happen\n", port->name); parport_ieee1284_terminate (port); return 1; } @@ -481,10 +467,9 @@ int parport_negotiate (struct parport *port, int mode) PARPORT_STATUS_ACK)) { /* This shouldn't really happen with a compliant * device. */ - DPRINTK (KERN_DEBUG - "%s: Mode 0x%02x not supported? (0x%02x)\n", + pr_debug("%s: Mode 0x%02x not supported? (0x%02x)\n", port->name, mode, - port->ops->read_status (port)); + port->ops->read_status(port)); parport_ieee1284_terminate (port); return 1; } @@ -495,8 +480,8 @@ int parport_negotiate (struct parport *port, int mode) /* xflag should be high. */ if (!xflag) { /* Extended mode not supported. */ - DPRINTK (KERN_DEBUG "%s: Extended mode 0x%02x not " - "supported\n", port->name, mode); + pr_debug("%s: Extended mode 0x%02x not supported\n", + port->name, mode); parport_ieee1284_terminate (port); return 1; } @@ -505,7 +490,7 @@ int parport_negotiate (struct parport *port, int mode) } /* Mode is supported */ - DPRINTK (KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode); + pr_debug("%s: In mode 0x%02x\n", port->name, mode); port->ieee1284.mode = mode; /* But ECP is special */ @@ -522,13 +507,11 @@ int parport_negotiate (struct parport *port, int mode) PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) { - DPRINTK (KERN_INFO "%s: Timeout at event 31\n", - port->name); + pr_debug("%s: Timeout at event 31\n", port->name); } port->ieee1284.phase = IEEE1284_PH_FWD_IDLE; - DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n", - port->name); + pr_debug("%s: ECP direction: forward\n", port->name); } else switch (mode) { case IEEE1284_MODE_NIBBLE: case IEEE1284_MODE_BYTE: @@ -573,7 +556,7 @@ void parport_ieee1284_interrupt (void *handle) if (port->ieee1284.phase == IEEE1284_PH_REV_IDLE) { /* An interrupt in this phase means that data * is now available. */ - DPRINTK (KERN_DEBUG "%s: Data available\n", port->name); + pr_debug("%s: Data available\n", port->name); parport_ieee1284_ack_data_avail (port); } #endif /* IEEE1284 support */ @@ -617,13 +600,12 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len) parport_negotiate (port, IEEE1284_MODE_COMPAT); /* fall through */ case IEEE1284_MODE_COMPAT: - DPRINTK (KERN_DEBUG "%s: Using compatibility mode\n", - port->name); + pr_debug("%s: Using compatibility mode\n", port->name); fn = port->ops->compat_write_data; break; case IEEE1284_MODE_EPP: - DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name); + pr_debug("%s: Using EPP mode\n", port->name); if (addr) { fn = port->ops->epp_write_addr; } else { @@ -631,8 +613,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len) } break; case IEEE1284_MODE_EPPSWE: - DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n", - port->name); + pr_debug("%s: Using software-emulated EPP mode\n", port->name); if (addr) { fn = parport_ieee1284_epp_write_addr; } else { @@ -641,7 +622,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len) break; case IEEE1284_MODE_ECP: case IEEE1284_MODE_ECPRLE: - DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name); + pr_debug("%s: Using ECP mode\n", port->name); if (addr) { fn = port->ops->ecp_write_addr; } else { @@ -650,8 +631,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len) break; case IEEE1284_MODE_ECPSWE: - DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n", - port->name); + pr_debug("%s: Using software-emulated ECP mode\n", port->name); /* The caller has specified that it must be emulated, * even if we have ECP hardware! */ if (addr) { @@ -662,13 +642,13 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len) break; default: - DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name, - port->ieee1284.mode); + pr_debug("%s: Unknown mode 0x%02x\n", + port->name, port->ieee1284.mode); return -ENOSYS; } retval = (*fn) (port, buffer, len, 0); - DPRINTK (KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len); + pr_debug("%s: wrote %zd/%zu bytes\n", port->name, retval, len); return retval; #endif /* IEEE1284 support */ } @@ -715,7 +695,7 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len) if ((port->physport->modes & PARPORT_MODE_TRISTATE) && !parport_negotiate (port, IEEE1284_MODE_BYTE)) { /* got into BYTE mode OK */ - DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name); + pr_debug("%s: Using byte mode\n", port->name); fn = port->ops->byte_read_data; break; } @@ -724,17 +704,17 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len) } /* fall through - to NIBBLE */ case IEEE1284_MODE_NIBBLE: - DPRINTK (KERN_DEBUG "%s: Using nibble mode\n", port->name); + pr_debug("%s: Using nibble mode\n", port->name); fn = port->ops->nibble_read_data; break; case IEEE1284_MODE_BYTE: - DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name); + pr_debug("%s: Using byte mode\n", port->name); fn = port->ops->byte_read_data; break; case IEEE1284_MODE_EPP: - DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name); + pr_debug("%s: Using EPP mode\n", port->name); if (addr) { fn = port->ops->epp_read_addr; } else { @@ -742,8 +722,7 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len) } break; case IEEE1284_MODE_EPPSWE: - DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n", - port->name); + pr_debug("%s: Using software-emulated EPP mode\n", port->name); if (addr) { fn = parport_ieee1284_epp_read_addr; } else { @@ -752,19 +731,18 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len) break; case IEEE1284_MODE_ECP: case IEEE1284_MODE_ECPRLE: - DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name); + pr_debug("%s: Using ECP mode\n", port->name); fn = port->ops->ecp_read_data; break; case IEEE1284_MODE_ECPSWE: - DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n", - port->name); + pr_debug("%s: Using software-emulated ECP mode\n", port->name); fn = parport_ieee1284_ecp_read_data; break; default: - DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name, - port->physport->ieee1284.mode); + pr_debug("%s: Unknown mode 0x%02x\n", + port->name, port->physport->ieee1284.mode); return -ENOSYS; } diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c index 5d41dda6da4e..b1c9f513167b 100644 --- a/drivers/parport/ieee1284_ops.c +++ b/drivers/parport/ieee1284_ops.c @@ -27,12 +27,6 @@ #undef DEBUG /* Don't want a garbled console */ #endif -#ifdef DEBUG -#define DPRINTK(stuff...) printk (stuff) -#else -#define DPRINTK(stuff...) -#endif - /*** * * One-way data transfer functions. * * ***/ @@ -115,7 +109,7 @@ size_t parport_ieee1284_write_compat (struct parport *port, if (signal_pending (current)) break; - DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name); + pr_debug("%s: Timed out\n", port->name); break; ready: @@ -178,9 +172,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port, if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) { /* Timeout -- no more data? */ - DPRINTK (KERN_DEBUG - "%s: Nibble timeout at event 9 (%d bytes)\n", - port->name, i/2); + pr_debug("%s: Nibble timeout at event 9 (%d bytes)\n", + port->name, i / 2); parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0); break; } @@ -201,8 +194,7 @@ size_t parport_ieee1284_read_nibble (struct parport *port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK)) { /* Timeout -- no more data? */ - DPRINTK (KERN_DEBUG - "%s: Nibble timeout at event 11\n", + pr_debug("%s: Nibble timeout at event 11\n", port->name); break; } @@ -219,9 +211,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port, /* Read the last nibble without checking data avail. */ if (parport_read_status (port) & PARPORT_STATUS_ERROR) { end_of_data: - DPRINTK (KERN_DEBUG - "%s: No more nibble data (%d bytes)\n", - port->name, i/2); + pr_debug("%s: No more nibble data (%d bytes)\n", + port->name, i / 2); /* Go to reverse idle phase. */ parport_frob_control (port, @@ -272,8 +263,7 @@ size_t parport_ieee1284_read_byte (struct parport *port, /* Timeout -- no more data? */ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0); - DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n", - port->name); + pr_debug("%s: Byte timeout at event 9\n", port->name); break; } @@ -288,8 +278,7 @@ size_t parport_ieee1284_read_byte (struct parport *port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK)) { /* Timeout -- no more data? */ - DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n", - port->name); + pr_debug("%s: Byte timeout at event 11\n", port->name); break; } @@ -307,8 +296,7 @@ size_t parport_ieee1284_read_byte (struct parport *port, /* Read the last byte without checking data avail. */ if (parport_read_status (port) & PARPORT_STATUS_ERROR) { end_of_data: - DPRINTK (KERN_DEBUG - "%s: No more byte data (%zd bytes)\n", + pr_debug("%s: No more byte data (%zd bytes)\n", port->name, count); /* Go to reverse idle phase. */ @@ -353,12 +341,10 @@ int ecp_forward_to_reverse (struct parport *port) PARPORT_STATUS_PAPEROUT, 0); if (!retval) { - DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n", - port->name); + pr_debug("%s: ECP direction: reverse\n", port->name); port->ieee1284.phase = IEEE1284_PH_REV_IDLE; } else { - DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n", - port->name); + pr_debug("%s: ECP direction: failed to reverse\n", port->name); port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN; } @@ -384,12 +370,10 @@ int ecp_reverse_to_forward (struct parport *port) if (!retval) { parport_data_forward (port); - DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n", - port->name); + pr_debug("%s: ECP direction: forward\n", port->name); port->ieee1284.phase = IEEE1284_PH_FWD_IDLE; } else { - DPRINTK (KERN_DEBUG - "%s: ECP direction: failed to switch forward\n", + pr_debug("%s: ECP direction: failed to switch forward\n", port->name); port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN; } @@ -450,7 +434,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port, } /* Time for Host Transfer Recovery (page 41 of IEEE1284) */ - DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name); + pr_debug("%s: ECP transfer stalled!\n", port->name); parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); @@ -466,8 +450,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port, if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT)) break; - DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n", - port->name); + pr_debug("%s: Host transfer recovered\n", port->name); if (time_after_eq (jiffies, expire)) break; goto try_again; @@ -565,23 +548,20 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port, command or a normal data byte, don't accept it. */ if (command) { if (byte & 0x80) { - DPRINTK (KERN_DEBUG "%s: stopping short at " - "channel command (%02x)\n", + pr_debug("%s: stopping short at channel command (%02x)\n", port->name, byte); goto out; } else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE) - DPRINTK (KERN_DEBUG "%s: device illegally " - "using RLE; accepting anyway\n", + pr_debug("%s: device illegally using RLE; accepting anyway\n", port->name); rle_count = byte + 1; /* Are we allowed to read that many bytes? */ if (rle_count > (len - count)) { - DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes " - "for next time\n", port->name, - rle_count); + pr_debug("%s: leaving %d RLE bytes for next time\n", + port->name, rle_count); break; } @@ -596,7 +576,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port, PARPORT_STATUS_ACK)) { /* It's gone wrong. Return what data we have to the caller. */ - DPRINTK (KERN_DEBUG "ECP read timed out at 45\n"); + pr_debug("ECP read timed out at 45\n"); if (command) printk (KERN_WARNING @@ -620,7 +600,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port, memset (buf, byte, rle_count); buf += rle_count; count += rle_count; - DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n", + pr_debug("%s: decompressed to %d bytes\n", port->name, rle_count); } else { /* Normal data byte. */ @@ -686,7 +666,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port, } /* Time for Host Transfer Recovery (page 41 of IEEE1284) */ - DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name); + pr_debug("%s: ECP transfer stalled!\n", port->name); parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); @@ -702,8 +682,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port, if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT)) break; - DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n", - port->name); + pr_debug("%s: Host transfer recovered\n", port->name); if (time_after_eq (jiffies, expire)) break; goto try_again; -- cgit v1.2.3 From decf26f6ec25dac868782dc1751623a87d147831 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:16 +0100 Subject: parport: Convert printk(KERN_ to pr_( Use the more common kernel style. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-2-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/daisy.c | 6 +- drivers/parport/ieee1284.c | 4 +- drivers/parport/ieee1284_ops.c | 3 +- drivers/parport/parport_amiga.c | 2 +- drivers/parport/parport_atari.c | 2 +- drivers/parport/parport_cs.c | 6 +- drivers/parport/parport_gsc.c | 7 +- drivers/parport/parport_ip32.c | 25 +++--- drivers/parport/parport_mfc3.c | 2 +- drivers/parport/parport_pc.c | 166 +++++++++++++++++---------------------- drivers/parport/parport_sunbpp.c | 2 +- drivers/parport/probe.c | 7 +- drivers/parport/share.c | 24 +++--- 13 files changed, 110 insertions(+), 146 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c index 3b00e2c8e2e9..f87cc802167e 100644 --- a/drivers/parport/daisy.c +++ b/drivers/parport/daisy.c @@ -145,8 +145,7 @@ again: ((num_ports = num_mux_ports(port)) == 2 || num_ports == 4)) { /* Leave original as port zero. */ port->muxport = 0; - printk(KERN_INFO - "%s: 1st (default) port of %d-way multiplexor\n", + pr_info("%s: 1st (default) port of %d-way multiplexor\n", port->name, num_ports); for (i = 1; i < num_ports; i++) { /* Clone the port. */ @@ -159,8 +158,7 @@ again: continue; } - printk(KERN_INFO - "%s: %d%s port of %d-way multiplexor on %s\n", + pr_info("%s: %d%s port of %d-way multiplexor on %s\n", extra->name, i + 1, th[i + 1], num_ports, port->name); diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c index ba562bcd4b80..f28d6a3c5a68 100644 --- a/drivers/parport/ieee1284.c +++ b/drivers/parport/ieee1284.c @@ -319,7 +319,7 @@ int parport_negotiate (struct parport *port, int mode) #ifndef CONFIG_PARPORT_1284 if (mode == IEEE1284_MODE_COMPAT) return 0; - printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n"); + pr_err("parport: IEEE1284 not supported in this kernel\n"); return -1; #else int m = mode & ~IEEE1284_ADDR; @@ -674,7 +674,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len) ssize_t parport_read (struct parport *port, void *buffer, size_t len) { #ifndef CONFIG_PARPORT_1284 - printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n"); + pr_err("parport: IEEE1284 not supported in this kernel\n"); return -ENODEV; #else int mode = port->physport->ieee1284.mode; diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c index b1c9f513167b..2c11bd3fe1fd 100644 --- a/drivers/parport/ieee1284_ops.c +++ b/drivers/parport/ieee1284_ops.c @@ -579,8 +579,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port, pr_debug("ECP read timed out at 45\n"); if (command) - printk (KERN_WARNING - "%s: command ignored (%02x)\n", + pr_warn("%s: command ignored (%02x)\n", port->name, byte); break; diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c index 3301861f69fa..8c7a598abcff 100644 --- a/drivers/parport/parport_amiga.c +++ b/drivers/parport/parport_amiga.c @@ -212,7 +212,7 @@ static int __init amiga_parallel_probe(struct platform_device *pdev) if (err) goto out_irq; - printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name); + pr_info("%s: Amiga built-in port using irq\n", p->name); /* XXX: set operating mode */ parport_announce_port(p); diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c index f8dd368bfdbb..2ff0fe053e6e 100644 --- a/drivers/parport/parport_atari.c +++ b/drivers/parport/parport_atari.c @@ -200,7 +200,7 @@ static int __init parport_atari_init(void) } this_port = p; - printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name); + pr_info("%s: Atari built-in port using irq\n", p->name); parport_announce_port (p); return 0; diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index e77044c2bf62..8e7e3ac4bb87 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -142,10 +142,8 @@ static int parport_config(struct pcmcia_device *link) link->irq, PARPORT_DMA_NONE, &link->dev, IRQF_SHARED); if (p == NULL) { - printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at " - "0x%3x, irq %u failed\n", - (unsigned int) link->resource[0]->start, - link->irq); + pr_notice("parport_cs: parport_pc_probe_port() at 0x%3x, irq %u failed\n", + (unsigned int)link->resource[0]->start, link->irq); goto failed; } diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index 922535a118ba..81082d5899b0 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -282,7 +282,7 @@ struct parport *parport_gsc_probe_port(unsigned long base, p->size = (p->modes & PARPORT_MODE_EPP)?8:3; p->private_data = priv; - printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); + pr_info("%s: PC-style at 0x%lx", p->name, p->base); p->irq = irq; if (p->irq == PARPORT_IRQ_AUTO) { p->irq = PARPORT_IRQ_NONE; @@ -315,8 +315,7 @@ struct parport *parport_gsc_probe_port(unsigned long base, if (p->irq != PARPORT_IRQ_NONE) { if (request_irq (p->irq, parport_irq_handler, 0, p->name, p)) { - printk (KERN_WARNING "%s: irq %d in use, " - "resorting to polled operation\n", + pr_warn("%s: irq %d in use, resorting to polled operation\n", p->name, p->irq); p->irq = PARPORT_IRQ_NONE; p->dma = PARPORT_DMA_NONE; @@ -347,7 +346,7 @@ static int __init parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n", + pr_warn("IRQ not found for parallel device at 0x%llx\n", (unsigned long long)dev->hpa.start); return -ENODEV; } diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c index ab215b650f41..4f76e4f4f6cf 100644 --- a/drivers/parport/parport_ip32.c +++ b/drivers/parport/parport_ip32.c @@ -1337,9 +1337,8 @@ static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p) ecr = parport_ip32_read_econtrol(p); if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR) && !lost_interrupt) { - printk(KERN_WARNING PPIP32 - "%s: lost interrupt in %s\n", - p->name, __func__); + pr_warn(PPIP32 "%s: lost interrupt in %s\n", + p->name, __func__); lost_interrupt = 1; } } @@ -1643,8 +1642,8 @@ static size_t parport_ip32_compat_write_data(struct parport *p, DSR_nBUSY | DSR_nFAULT)) { /* Avoid to flood the logs */ if (ready_before) - printk(KERN_INFO PPIP32 "%s: not ready in %s\n", - p->name, __func__); + pr_info(PPIP32 "%s: not ready in %s\n", + p->name, __func__); ready_before = 0; goto stop; } @@ -1724,8 +1723,8 @@ static size_t parport_ip32_ecp_write_data(struct parport *p, DSR_nBUSY | DSR_nFAULT)) { /* Avoid to flood the logs */ if (ready_before) - printk(KERN_INFO PPIP32 "%s: not ready in %s\n", - p->name, __func__); + pr_info(PPIP32 "%s: not ready in %s\n", + p->name, __func__); ready_before = 0; goto stop; } @@ -2064,8 +2063,7 @@ static __init struct parport *parport_ip32_probe_port(void) p->modes |= PARPORT_MODE_TRISTATE; if (!parport_ip32_fifo_supported(p)) { - printk(KERN_WARNING PPIP32 - "%s: error: FIFO disabled\n", p->name); + pr_warn(PPIP32 "%s: error: FIFO disabled\n", p->name); /* Disable hardware modes depending on a working FIFO. */ features &= ~PARPORT_IP32_ENABLE_SPP; features &= ~PARPORT_IP32_ENABLE_ECP; @@ -2077,8 +2075,7 @@ static __init struct parport *parport_ip32_probe_port(void) if (features & PARPORT_IP32_ENABLE_IRQ) { int irq = MACEISA_PARALLEL_IRQ; if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) { - printk(KERN_WARNING PPIP32 - "%s: error: IRQ disabled\n", p->name); + pr_warn(PPIP32 "%s: error: IRQ disabled\n", p->name); /* DMA cannot work without interrupts. */ features &= ~PARPORT_IP32_ENABLE_DMA; } else { @@ -2091,8 +2088,7 @@ static __init struct parport *parport_ip32_probe_port(void) /* Allocate DMA resources */ if (features & PARPORT_IP32_ENABLE_DMA) { if (parport_ip32_dma_register()) - printk(KERN_WARNING PPIP32 - "%s: error: DMA disabled\n", p->name); + pr_warn(PPIP32 "%s: error: DMA disabled\n", p->name); else { pr_probe(p, "DMA support enabled\n"); p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */ @@ -2134,8 +2130,7 @@ static __init struct parport *parport_ip32_probe_port(void) parport_ip32_dump_state(p, "end init", 0); /* Print out what we found */ - printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)", - p->name, p->base, p->base_hi); + pr_info("%s: SGI IP32 at 0x%lx (0x%lx)", p->name, p->base, p->base_hi); if (p->irq != PARPORT_IRQ_NONE) printk(", irq %d", p->irq); printk(" ["); diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c index 9f87faf939e3..3190ef0f3c81 100644 --- a/drivers/parport/parport_mfc3.c +++ b/drivers/parport/parport_mfc3.c @@ -325,7 +325,7 @@ static int __init parport_mfc3_init(void) p->dev = &z->dev; this_port[pias++] = p; - printk(KERN_INFO "%s: Multiface III port using irq\n", p->name); + pr_info("%s: Multiface III port using irq\n", p->name); /* XXX: set operating mode */ p->private_data = (void *)piabase; diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 1f17a39eabe8..2872c6756489 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -982,28 +982,24 @@ static void show_parconfig_smsc37c669(int io, int key) outb(0xaa, io); if (verbose_probing) { - printk(KERN_INFO - "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, " - "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n", + pr_info("SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n", cr1, cr4, cra, cr23, cr26, cr27); /* The documentation calls DMA and IRQ-Lines by letters, so the board maker can/will wire them appropriately/randomly... G=reserved H=IDE-irq, */ - printk(KERN_INFO - "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n", - cr23 * 4, - (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-', - (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-', - cra & 0x0f); - printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n", - (cr23 * 4 >= 0x100) ? "yes" : "no", - (cr1 & 4) ? "yes" : "no"); - printk(KERN_INFO - "SMSC LPT Config: Port mode=%s, EPP version =%s\n", - (cr1 & 0x08) ? "Standard mode only (SPP)" - : modes[cr4 & 0x03], - (cr4 & 0x40) ? "1.7" : "1.9"); + pr_info("SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n", + cr23 * 4, + (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-', + (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-', + cra & 0x0f); + pr_info("SMSC LPT Config: enabled=%s power=%s\n", + (cr23 * 4 >= 0x100) ? "yes" : "no", + (cr1 & 4) ? "yes" : "no"); + pr_info("SMSC LPT Config: Port mode=%s, EPP version =%s\n", + (cr1 & 0x08) ? "Standard mode only (SPP)" + : modes[cr4 & 0x03], + (cr4 & 0x40) ? "1.7" : "1.9"); } /* Heuristics ! BIOS setup for this mainboard device limits @@ -1013,7 +1009,7 @@ static void show_parconfig_smsc37c669(int io, int key) if (cr23 * 4 >= 0x100) { /* if active */ s = find_free_superio(); if (s == NULL) - printk(KERN_INFO "Super-IO: too many chips!\n"); + pr_info("Super-IO: too many chips!\n"); else { int d; switch (cr23 * 4) { @@ -1078,26 +1074,24 @@ static void show_parconfig_winbond(int io, int key) outb(0xaa, io); if (verbose_probing) { - printk(KERN_INFO - "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n", - cr30, cr60, cr61, cr70, cr74, crf0); - printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", - (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f); + pr_info("Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n", + cr30, cr60, cr61, cr70, cr74, crf0); + pr_info("Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", + (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f); if ((cr74 & 0x07) > 3) pr_cont("dma=none\n"); else pr_cont("dma=%d\n", cr74 & 0x07); - printk(KERN_INFO - "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n", - irqtypes[crf0>>7], (crf0>>3)&0x0f); - printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", - modes[crf0 & 0x07]); + pr_info("Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n", + irqtypes[crf0 >> 7], (crf0 >> 3) & 0x0f); + pr_info("Winbond LPT Config: Port mode=%s\n", + modes[crf0 & 0x07]); } if (cr30 & 0x01) { /* the settings can be interrogated later ... */ s = find_free_superio(); if (s == NULL) - printk(KERN_INFO "Super-IO: too many chips!\n"); + pr_info("Super-IO: too many chips!\n"); else { s->io = (cr60 << 8) | cr61; s->irq = cr70 & 0x0f; @@ -1151,9 +1145,8 @@ static void decode_winbond(int efer, int key, int devid, int devrev, int oldid) progif = 0; if (verbose_probing) - printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x " - "devid=%02x devrev=%02x oldid=%02x type=%s\n", - efer, key, devid, devrev, oldid, type); + pr_info("Winbond chip at EFER=0x%x key=0x%02x devid=%02x devrev=%02x oldid=%02x type=%s\n", + efer, key, devid, devrev, oldid, type); if (progif == 2) show_parconfig_winbond(efer, key); @@ -1184,9 +1177,8 @@ static void decode_smsc(int efer, int key, int devid, int devrev) type = "37c666GT"; if (verbose_probing) - printk(KERN_INFO "SMSC chip at EFER=0x%x " - "key=0x%02x devid=%02x devrev=%02x type=%s\n", - efer, key, devid, devrev, type); + pr_info("SMSC chip at EFER=0x%x key=0x%02x devid=%02x devrev=%02x type=%s\n", + efer, key, devid, devrev, type); if (func) func(efer, key); @@ -1358,7 +1350,7 @@ static void detect_and_report_it87(void) dev |= inb(0x2f); if (dev == 0x8712 || dev == 0x8705 || dev == 0x8715 || dev == 0x8716 || dev == 0x8718 || dev == 0x8726) { - printk(KERN_INFO "IT%04X SuperIO detected.\n", dev); + pr_info("IT%04X SuperIO detected\n", dev); outb(0x07, 0x2E); /* Parallel Port */ outb(0x03, 0x2F); outb(0xF0, 0x2E); /* BOOT 0x80 off */ @@ -1445,8 +1437,8 @@ static int parport_SPP_supported(struct parport *pb) if (user_specified) /* That didn't work, but the user thinks there's a * port here. */ - printk(KERN_INFO "parport 0x%lx (WARNING): CTR: " - "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); + pr_info("parport 0x%lx (WARNING): CTR: wrote 0x%02x, read 0x%02x\n", + pb->base, w, r); /* Try the data register. The data lines aren't tri-stated at * this stage, so we expect back what we wrote. */ @@ -1464,10 +1456,9 @@ static int parport_SPP_supported(struct parport *pb) if (user_specified) { /* Didn't work, but the user is convinced this is the * place. */ - printk(KERN_INFO "parport 0x%lx (WARNING): DATA: " - "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); - printk(KERN_INFO "parport 0x%lx: You gave this address, " - "but there is probably no parallel port there!\n", + pr_info("parport 0x%lx (WARNING): DATA: wrote 0x%02x, read 0x%02x\n", + pb->base, w, r); + pr_info("parport 0x%lx: You gave this address, but there is probably no parallel port there!\n", pb->base); } @@ -1642,7 +1633,7 @@ static int parport_ECP_supported(struct parport *pb) if (i <= priv->fifo_depth) { if (verbose_probing) - printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n", + pr_info("0x%lx: readIntrThreshold is %d\n", pb->base, i); } else /* Number of bytes we can read if we get an interrupt. */ @@ -1657,17 +1648,14 @@ static int parport_ECP_supported(struct parport *pb) switch (pword) { case 0: pword = 2; - printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", - pb->base); + pr_warn("0x%lx: Unsupported pword size!\n", pb->base); break; case 2: pword = 4; - printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", - pb->base); + pr_warn("0x%lx: Unsupported pword size!\n", pb->base); break; default: - printk(KERN_WARNING "0x%lx: Unknown implementation ID\n", - pb->base); + pr_warn("0x%lx: Unknown implementation ID\n", pb->base); /* Fall through - Assume 1 */ case 1: pword = 1; @@ -2107,9 +2095,9 @@ struct parport *parport_pc_probe_port(unsigned long int base, p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3; - printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); + pr_info("%s: PC-style at 0x%lx", p->name, p->base); if (p->base_hi && priv->ecr) - printk(KERN_CONT " (0x%lx)", p->base_hi); + pr_cont(" (0x%lx)", p->base_hi); if (p->irq == PARPORT_IRQ_AUTO) { p->irq = PARPORT_IRQ_NONE; parport_irq_probe(p); @@ -2120,7 +2108,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, p->irq = PARPORT_IRQ_NONE; } if (p->irq != PARPORT_IRQ_NONE) { - printk(KERN_CONT ", irq %d", p->irq); + pr_cont(", irq %d", p->irq); priv->ctr_writable |= 0x10; if (p->dma == PARPORT_DMA_AUTO) { @@ -2144,21 +2132,21 @@ struct parport *parport_pc_probe_port(unsigned long int base, /* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */ #endif /* IEEE 1284 support */ if (p->dma != PARPORT_DMA_NONE) { - printk(KERN_CONT ", dma %d", p->dma); + pr_cont(", dma %d", p->dma); p->modes |= PARPORT_MODE_DMA; } else - printk(KERN_CONT ", using FIFO"); + pr_cont(", using FIFO"); } else /* We can't use the DMA channel after all. */ p->dma = PARPORT_DMA_NONE; #endif /* Allowed to use FIFO/DMA */ - printk(KERN_CONT " ["); + pr_cont(" ["); #define printmode(x) \ {\ if (p->modes & PARPORT_MODE_##x) {\ - printk(KERN_CONT "%s%s", f ? "," : "", #x);\ + pr_cont("%s%s", f ? "," : "", #x); \ f++;\ } \ } @@ -2174,11 +2162,11 @@ struct parport *parport_pc_probe_port(unsigned long int base, } #undef printmode #ifndef CONFIG_PARPORT_1284 - printk(KERN_CONT "(,...)"); + pr_cont("(,...)"); #endif /* CONFIG_PARPORT_1284 */ - printk(KERN_CONT "]\n"); + pr_cont("]\n"); if (probedirq != PARPORT_IRQ_NONE) - printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq); + pr_info("%s: irq %d detected\n", p->name, probedirq); /* If No ECP release the ports grabbed above. */ if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) { @@ -2193,8 +2181,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (p->irq != PARPORT_IRQ_NONE) { if (request_irq(p->irq, parport_irq_handler, irqflags, p->name, p)) { - printk(KERN_WARNING "%s: irq %d in use, " - "resorting to polled operation\n", + pr_warn("%s: irq %d in use, resorting to polled operation\n", p->name, p->irq); p->irq = PARPORT_IRQ_NONE; p->dma = PARPORT_DMA_NONE; @@ -2204,8 +2191,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, #ifdef HAS_DMA if (p->dma != PARPORT_DMA_NONE) { if (request_dma(p->dma, p->name)) { - printk(KERN_WARNING "%s: dma %d in use, " - "resorting to PIO operation\n", + pr_warn("%s: dma %d in use, resorting to PIO operation\n", p->name, p->dma); p->dma = PARPORT_DMA_NONE; } else { @@ -2215,9 +2201,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, &priv->dma_handle, GFP_KERNEL); if (!priv->dma_buf) { - printk(KERN_WARNING "%s: " - "cannot get buffer for DMA, " - "resorting to PIO operation\n", + pr_warn("%s: cannot get buffer for DMA, resorting to PIO operation\n", p->name); free_dma(p->dma); p->dma = PARPORT_DMA_NONE; @@ -2330,7 +2314,7 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma, } } if (i >= 5) { - printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); + pr_info("parport_pc: cannot find ITE8872 INTA\n"); return 0; } @@ -2339,29 +2323,28 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma, switch (type) { case 0x2: - printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n"); + pr_info("parport_pc: ITE8871 found (1P)\n"); ite8872set = 0x64200000; break; case 0xa: - printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n"); + pr_info("parport_pc: ITE8875 found (1P)\n"); ite8872set = 0x64200000; break; case 0xe: - printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); + pr_info("parport_pc: ITE8872 found (2S1P)\n"); ite8872set = 0x64e00000; break; case 0x6: - printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n"); + pr_info("parport_pc: ITE8873 found (1S)\n"); release_region(inta_addr[i], 32); return 0; case 0x8: - printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n"); + pr_info("parport_pc: ITE8874 found (2S)\n"); release_region(inta_addr[i], 32); return 0; default: - printk(KERN_INFO "parport_pc: unknown ITE887x\n"); - printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' " - "output to Rich.Liu@ite.com.tw\n"); + pr_info("parport_pc: unknown ITE887x\n"); + pr_info("parport_pc: please mail 'lspci -nvv' output to Rich.Liu@ite.com.tw\n"); release_region(inta_addr[i], 32); return 0; } @@ -2396,9 +2379,8 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma, release_region(inta_addr[i], 32); if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi, irq, PARPORT_DMA_NONE, &pdev->dev, 0)) { - printk(KERN_INFO - "parport_pc: ITE 8872 parallel port: io=0x%X", - ite8872_lpt); + pr_info("parport_pc: ITE 8872 parallel port: io=0x%X", + ite8872_lpt); if (irq != PARPORT_IRQ_NONE) pr_cont(", irq=%d", irq); pr_cont("\n"); @@ -2525,7 +2507,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp); if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) { - printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n"); + pr_info("parport_pc: VIA parallel port disabled in BIOS\n"); return 0; } @@ -2558,9 +2540,8 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, case 0x278: port2 = 0x678; break; default: - printk(KERN_INFO - "parport_pc: Weird VIA parport base 0x%X, ignoring\n", - port1); + pr_info("parport_pc: Weird VIA parport base 0x%X, ignoring\n", + port1); return 0; } @@ -2579,8 +2560,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, /* finally, do the probe with values obtained */ if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) { - printk(KERN_INFO - "parport_pc: VIA parallel port: io=0x%X", port1); + pr_info("parport_pc: VIA parallel port: io=0x%X", port1); if (irq != PARPORT_IRQ_NONE) pr_cont(", irq=%d", irq); if (dma != PARPORT_DMA_NONE) @@ -2589,7 +2569,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, return 1; } - printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n", + pr_warn("parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n", port1, irq, dma); return 0; } @@ -3111,7 +3091,7 @@ static int __init parport_parse_param(const char *s, int *val, if (ep != s) *val = r; else { - printk(KERN_ERR "parport: bad specifier `%s'\n", s); + pr_err("parport: bad specifier `%s'\n", s); return -1; } } @@ -3201,10 +3181,7 @@ static int __init parse_parport_params(void) irqval[0] = val; break; default: - printk(KERN_WARNING - "parport_pc: irq specified " - "without base address. Use 'io=' " - "to specify one\n"); + pr_warn("parport_pc: irq specified without base address. Use 'io=' to specify one\n"); } if (dma[0] && !parport_parse_dma(dma[0], &val)) @@ -3214,10 +3191,7 @@ static int __init parse_parport_params(void) dmaval[0] = val; break; default: - printk(KERN_WARNING - "parport_pc: dma specified " - "without base address. Use 'io=' " - "to specify one\n"); + pr_warn("parport_pc: dma specified without base address. Use 'io=' to specify one\n"); } } return 0; @@ -3256,12 +3230,12 @@ static int __init parport_setup(char *str) val = simple_strtoul(str, &endptr, 0); if (endptr == str) { - printk(KERN_WARNING "parport=%s not understood\n", str); + pr_warn("parport=%s not understood\n", str); return 1; } if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) { - printk(KERN_ERR "parport=%s ignored, too many ports\n", str); + pr_err("parport=%s ignored, too many ports\n", str); return 1; } diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c index d5a669b60c27..e840c1b5ab90 100644 --- a/drivers/parport/parport_sunbpp.c +++ b/drivers/parport/parport_sunbpp.c @@ -314,7 +314,7 @@ static int bpp_probe(struct platform_device *op) value_tcr &= ~P_TCR_DIR; sbus_writeb(value_tcr, ®s->p_tcr); - printk(KERN_INFO "%s: sunbpp at 0x%lx\n", p->name, p->base); + pr_info("%s: sunbpp at 0x%lx\n", p->name, p->base); dev_set_drvdata(&op->dev, p); diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c index e5e6a463a941..10ed0d174080 100644 --- a/drivers/parport/probe.c +++ b/drivers/parport/probe.c @@ -38,7 +38,7 @@ static void pretty_print(struct parport *port, int device) { struct parport_device_info *info = &port->probe_info[device + 1]; - printk(KERN_INFO "%s", port->name); + pr_info("%s", port->name); if (device >= 0) printk (" (addr %d)", device); @@ -58,7 +58,7 @@ static void parse_data(struct parport *port, int device, char *str) struct parport_device_info *info = &port->probe_info[device + 1]; if (!txt) { - printk(KERN_WARNING "%s probe: memory squeeze\n", port->name); + pr_warn("%s probe: memory squeeze\n", port->name); return; } strcpy(txt, str); @@ -98,7 +98,8 @@ static void parse_data(struct parport *port, int device, char *str) goto rock_on; } } - printk(KERN_WARNING "%s probe: warning, class '%s' not understood.\n", port->name, sep); + pr_warn("%s probe: warning, class '%s' not understood\n", + port->name, sep); info->class = PARPORT_CLASS_OTHER; } else if (!strcmp(p, "CMD") || !strcmp(p, "COMMAND SET")) { diff --git a/drivers/parport/share.c b/drivers/parport/share.c index d6920ebeabcd..b0f4513251ee 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -554,8 +554,8 @@ void parport_announce_port(struct parport *port) #endif if (!port->dev) - printk(KERN_WARNING "%s: fix this legacy no-device port driver!\n", - port->name); + pr_warn("%s: fix this legacy no-device port driver!\n", + port->name); parport_proc_register(port); mutex_lock(®istration_lock); @@ -727,7 +727,8 @@ parport_register_device(struct parport *port, const char *name, if (flags & PARPORT_DEV_LURK) { if (!pf || !kf) { - printk(KERN_INFO "%s: refused to register lurking device (%s) without callbacks\n", port->name, name); + pr_info("%s: refused to register lurking device (%s) without callbacks\n", + port->name, name); return NULL; } } @@ -996,7 +997,7 @@ void parport_unregister_device(struct pardevice *dev) #ifdef PARPORT_PARANOID if (!dev) { - printk(KERN_ERR "parport_unregister_device: passed NULL\n"); + pr_err("%s: passed NULL\n", __func__); return; } #endif @@ -1137,8 +1138,7 @@ int parport_claim(struct pardevice *dev) unsigned long flags; if (port->cad == dev) { - printk(KERN_INFO "%s: %s already owner\n", - dev->port->name,dev->name); + pr_info("%s: %s already owner\n", dev->port->name, dev->name); return 0; } @@ -1158,9 +1158,8 @@ int parport_claim(struct pardevice *dev) * I think we'll actually deadlock rather than * get here, but just in case.. */ - printk(KERN_WARNING - "%s: %s released port when preempted!\n", - port->name, oldcad->name); + pr_warn("%s: %s released port when preempted!\n", + port->name, oldcad->name); if (port->cad) goto blocked; } @@ -1320,8 +1319,8 @@ void parport_release(struct pardevice *dev) write_lock_irqsave(&port->cad_lock, flags); if (port->cad != dev) { write_unlock_irqrestore(&port->cad_lock, flags); - printk(KERN_WARNING "%s: %s tried to release parport when not owner\n", - port->name, dev->name); + pr_warn("%s: %s tried to release parport when not owner\n", + port->name, dev->name); return; } @@ -1361,7 +1360,8 @@ void parport_release(struct pardevice *dev) if (dev->port->cad) /* racy but no matter */ return; } else { - printk(KERN_ERR "%s: don't know how to wake %s\n", port->name, pd->name); + pr_err("%s: don't know how to wake %s\n", + port->name, pd->name); } } -- cgit v1.2.3 From aa3d6e7c49e3b480aa9db0e9924736726a6f75aa Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:17 +0100 Subject: parport: Use more comon logging styles Some of the logging can be poorly formatted because of unexpected line breaks given printks without KERN_CONT that should be pr_cont. Miscellanea: o Remove unnecessary spaces between function name and open parenthesis o Convert bare printks to pr_ where appropriate o Convert embedded function names to use %s, __func__ o Coalesce formats o Realign arguments o Use do {} while (0) in a macro and not a bare if Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-3-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_gsc.c | 10 ++--- drivers/parport/parport_gsc.h | 21 +++++----- drivers/parport/parport_ip32.c | 92 ++++++++++++++++++++++-------------------- drivers/parport/parport_pc.c | 62 +++++++++++++--------------- drivers/parport/probe.c | 27 +++++-------- drivers/parport/share.c | 13 +++--- 6 files changed, 108 insertions(+), 117 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index 81082d5899b0..cb6a08bee3c7 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -238,14 +238,14 @@ struct parport *parport_gsc_probe_port(unsigned long base, priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL); if (!priv) { - printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base); + printk(KERN_DEBUG "parport (0x%lx): no memory!\n", base); return NULL; } ops = kmemdup(&parport_gsc_ops, sizeof(struct parport_operations), GFP_KERNEL); if (!ops) { - printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n", - base); + printk(KERN_DEBUG "parport (0x%lx): no memory for ops!\n", + base); kfree (priv); return NULL; } @@ -359,11 +359,11 @@ static int __init parport_init_chip(struct parisc_device *dev) if (boot_cpu_data.cpu_type > pcxt && !pdc_add_valid(port+4)) { /* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */ - printk("%s: initialize bidirectional-mode.\n", __func__); + pr_info("%s: initialize bidirectional-mode\n", __func__); parport_writeb ( (0x10 + 0x20), port + 4); } else { - printk("%s: enhanced parport-modes not supported.\n", __func__); + pr_info("%s: enhanced parport-modes not supported\n", __func__); } p = parport_gsc_probe_port(port, 0, dev->irq, diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h index 4c4d3c6cd77e..9301217edf12 100644 --- a/drivers/parport/parport_gsc.h +++ b/drivers/parport/parport_gsc.h @@ -71,7 +71,7 @@ struct parport_gsc_private { static inline void parport_gsc_write_data(struct parport *p, unsigned char d) { #ifdef DEBUG_PARPORT - printk (KERN_DEBUG "parport_gsc_write_data(%p,0x%02x)\n", p, d); + printk(KERN_DEBUG "%s(%p,0x%02x)\n", __func__, p, d); #endif parport_writeb(d, DATA(p)); } @@ -80,8 +80,7 @@ static inline unsigned char parport_gsc_read_data(struct parport *p) { unsigned char val = parport_readb (DATA (p)); #ifdef DEBUG_PARPORT - printk (KERN_DEBUG "parport_gsc_read_data(%p) = 0x%02x\n", - p, val); + printk(KERN_DEBUG "%s(%p) = 0x%02x\n", __func__, p, val); #endif return val; } @@ -95,9 +94,9 @@ static inline unsigned char __parport_gsc_frob_control(struct parport *p, struct parport_gsc_private *priv = p->physport->private_data; unsigned char ctr = priv->ctr; #ifdef DEBUG_PARPORT - printk (KERN_DEBUG - "__parport_gsc_frob_control(%02x,%02x): %02x -> %02x\n", - mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); + printk(KERN_DEBUG "%s(%02x,%02x): %02x -> %02x\n", + __func__, mask, val, + ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); #endif ctr = (ctr & ~mask) ^ val; ctr &= priv->ctr_writable; /* only write writable bits. */ @@ -126,8 +125,8 @@ static inline void parport_gsc_write_control(struct parport *p, /* Take this out when drivers have adapted to newer interface. */ if (d & 0x20) { - printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", - p->name, p->cad->name); + printk(KERN_DEBUG "%s (%s): use data_reverse for this!\n", + p->name, p->cad->name); parport_gsc_data_reverse (p); } @@ -155,9 +154,9 @@ static inline unsigned char parport_gsc_frob_control(struct parport *p, /* Take this out when drivers have adapted to newer interface. */ if (mask & 0x20) { - printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", - p->name, p->cad->name, - (val & 0x20) ? "reverse" : "forward"); + printk(KERN_DEBUG "%s (%s): use data_%s for this!\n", + p->name, p->cad->name, + (val & 0x20) ? "reverse" : "forward"); if (val & 0x20) parport_gsc_data_reverse (p); else diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c index 4f76e4f4f6cf..48b084e86dc6 100644 --- a/drivers/parport/parport_ip32.c +++ b/drivers/parport/parport_ip32.c @@ -328,19 +328,19 @@ static void parport_ip32_dump_state(struct parport *p, char *str, "TST", "CFG"}; unsigned int ecr = readb(priv->regs.ecr); printk(KERN_DEBUG PPIP32 " ecr=0x%02x", ecr); - printk(" %s", - ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]); + pr_cont(" %s", + ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]); if (ecr & ECR_nERRINTR) - printk(",nErrIntrEn"); + pr_cont(",nErrIntrEn"); if (ecr & ECR_DMAEN) - printk(",dmaEn"); + pr_cont(",dmaEn"); if (ecr & ECR_SERVINTR) - printk(",serviceIntr"); + pr_cont(",serviceIntr"); if (ecr & ECR_F_FULL) - printk(",f_full"); + pr_cont(",f_full"); if (ecr & ECR_F_EMPTY) - printk(",f_empty"); - printk("\n"); + pr_cont(",f_empty"); + pr_cont("\n"); } if (show_ecp_config) { unsigned int oecr, cnfgA, cnfgB; @@ -352,52 +352,53 @@ static void parport_ip32_dump_state(struct parport *p, char *str, writeb(ECR_MODE_PS2, priv->regs.ecr); writeb(oecr, priv->regs.ecr); printk(KERN_DEBUG PPIP32 " cnfgA=0x%02x", cnfgA); - printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses"); + pr_cont(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses"); switch (cnfgA & CNFGA_ID_MASK) { case CNFGA_ID_8: - printk(",8 bits"); + pr_cont(",8 bits"); break; case CNFGA_ID_16: - printk(",16 bits"); + pr_cont(",16 bits"); break; case CNFGA_ID_32: - printk(",32 bits"); + pr_cont(",32 bits"); break; default: - printk(",unknown ID"); + pr_cont(",unknown ID"); break; } if (!(cnfgA & CNFGA_nBYTEINTRANS)) - printk(",ByteInTrans"); + pr_cont(",ByteInTrans"); if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8) - printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT, - ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : ""); - printk("\n"); + pr_cont(",%d byte%s left", + cnfgA & CNFGA_PWORDLEFT, + ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : ""); + pr_cont("\n"); printk(KERN_DEBUG PPIP32 " cnfgB=0x%02x", cnfgB); - printk(" irq=%u,dma=%u", - (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT, - (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT); - printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL)); + pr_cont(" irq=%u,dma=%u", + (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT, + (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT); + pr_cont(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL)); if (cnfgB & CNFGB_COMPRESS) - printk(",compress"); - printk("\n"); + pr_cont(",compress"); + pr_cont("\n"); } for (i = 0; i < 2; i++) { unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr); printk(KERN_DEBUG PPIP32 " dcr(%s)=0x%02x", i ? "soft" : "hard", dcr); - printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd"); + pr_cont(" %s", (dcr & DCR_DIR) ? "rev" : "fwd"); if (dcr & DCR_IRQ) - printk(",ackIntEn"); + pr_cont(",ackIntEn"); if (!(dcr & DCR_SELECT)) - printk(",nSelectIn"); + pr_cont(",nSelectIn"); if (dcr & DCR_nINIT) - printk(",nInit"); + pr_cont(",nInit"); if (!(dcr & DCR_AUTOFD)) - printk(",nAutoFD"); + pr_cont(",nAutoFD"); if (!(dcr & DCR_STROBE)) - printk(",nStrobe"); - printk("\n"); + pr_cont(",nStrobe"); + pr_cont("\n"); } #define sep (f++ ? ',' : ' ') { @@ -405,20 +406,20 @@ static void parport_ip32_dump_state(struct parport *p, char *str, unsigned int dsr = readb(priv->regs.dsr); printk(KERN_DEBUG PPIP32 " dsr=0x%02x", dsr); if (!(dsr & DSR_nBUSY)) - printk("%cBusy", sep); + pr_cont("%cBusy", sep); if (dsr & DSR_nACK) - printk("%cnAck", sep); + pr_cont("%cnAck", sep); if (dsr & DSR_PERROR) - printk("%cPError", sep); + pr_cont("%cPError", sep); if (dsr & DSR_SELECT) - printk("%cSelect", sep); + pr_cont("%cSelect", sep); if (dsr & DSR_nFAULT) - printk("%cnFault", sep); + pr_cont("%cnFault", sep); if (!(dsr & DSR_nPRINT)) - printk("%c(Print)", sep); + pr_cont("%c(Print)", sep); if (dsr & DSR_TIMEOUT) - printk("%cTimeout", sep); - printk("\n"); + pr_cont("%cTimeout", sep); + pr_cont("\n"); } #undef sep } @@ -1703,7 +1704,7 @@ static size_t parport_ip32_ecp_write_data(struct parport *p, /* Event 49: PError goes high. */ if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) { - printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s", + printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s\n", p->name, __func__); physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN; return 0; @@ -2132,10 +2133,13 @@ static __init struct parport *parport_ip32_probe_port(void) /* Print out what we found */ pr_info("%s: SGI IP32 at 0x%lx (0x%lx)", p->name, p->base, p->base_hi); if (p->irq != PARPORT_IRQ_NONE) - printk(", irq %d", p->irq); - printk(" ["); -#define printmode(x) if (p->modes & PARPORT_MODE_##x) \ - printk("%s%s", f++ ? "," : "", #x) + pr_cont(", irq %d", p->irq); + pr_cont(" ["); +#define printmode(x) \ +do { \ + if (p->modes & PARPORT_MODE_##x) \ + pr_cont("%s%s", f++ ? "," : "", #x); \ +} while (0) { unsigned int f = 0; printmode(PCSPP); @@ -2146,7 +2150,7 @@ static __init struct parport *parport_ip32_probe_port(void) printmode(DMA); } #undef printmode - printk("]\n"); + pr_cont("]\n"); parport_announce_port(p); return p; diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 2872c6756489..ab3b04f32815 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -298,8 +298,8 @@ static size_t parport_pc_epp_read_data(struct parport *port, void *buf, status = inb(STATUS(port)); if (status & 0x01) { /* EPP timeout should never occur... */ - printk(KERN_DEBUG -"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name); + printk(KERN_DEBUG "%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", + port->name); clear_epp_timeout(port); } } @@ -727,7 +727,7 @@ static size_t parport_pc_compat_write_block_pio(struct parport *port, r = change_mode(port, ECR_PPF); /* Parallel port FIFO */ if (r) printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", - port->name); + port->name); port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; @@ -770,9 +770,8 @@ static size_t parport_pc_compat_write_block_pio(struct parport *port, PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY); if (r) - printk(KERN_DEBUG - "%s: BUSY timeout (%d) in compat_write_block_pio\n", - port->name, r); + printk(KERN_DEBUG "%s: BUSY timeout (%d) in compat_write_block_pio\n", + port->name, r); port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE; @@ -810,8 +809,8 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) { - printk(KERN_DEBUG "%s: PError timeout (%d) " - "in ecp_write_block_pio\n", port->name, r); + printk(KERN_DEBUG "%s: PError timeout (%d) in ecp_write_block_pio\n", + port->name, r); } } @@ -824,7 +823,7 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port, r = change_mode(port, ECR_ECP); /* ECP FIFO */ if (r) printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", - port->name); + port->name); port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; /* Write the data to the FIFO. */ @@ -867,8 +866,8 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port, parport_frob_control(port, PARPORT_CONTROL_INIT, 0); r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0); if (r) - printk(KERN_DEBUG "%s: PE,1 timeout (%d) " - "in ecp_write_block_pio\n", port->name, r); + printk(KERN_DEBUG "%s: PE,1 timeout (%d) in ecp_write_block_pio\n", + port->name, r); parport_frob_control(port, PARPORT_CONTROL_INIT, @@ -877,17 +876,16 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) - printk(KERN_DEBUG "%s: PE,2 timeout (%d) " - "in ecp_write_block_pio\n", port->name, r); + printk(KERN_DEBUG "%s: PE,2 timeout (%d) in ecp_write_block_pio\n", + port->name, r); } r = parport_wait_peripheral(port, PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY); if (r) - printk(KERN_DEBUG - "%s: BUSY timeout (%d) in ecp_write_block_pio\n", - port->name, r); + printk(KERN_DEBUG "%s: BUSY timeout (%d) in ecp_write_block_pio\n", + port->name, r); port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE; @@ -1611,7 +1609,7 @@ static int parport_ECP_supported(struct parport *pb) if (i <= priv->fifo_depth) { if (verbose_probing) printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", - pb->base, i); + pb->base, i); } else /* Number of bytes we know we can write if we get an interrupt. */ @@ -1664,14 +1662,14 @@ static int parport_ECP_supported(struct parport *pb) if (verbose_probing) { printk(KERN_DEBUG "0x%lx: PWord is %d bits\n", - pb->base, 8 * pword); + pb->base, 8 * pword); - printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, - config & 0x80 ? "Level" : "Pulses"); + printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", + pb->base, config & 0x80 ? "Level" : "Pulses"); configb = inb(CONFIGB(pb)); printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", - pb->base, config, configb); + pb->base, config, configb); printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); if ((configb >> 3) & 0x07) pr_cont("%d", intrline[(configb >> 3) & 0x07]); @@ -2453,8 +2451,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, have_epp = 1; break; default: - printk(KERN_DEBUG - "parport_pc: probing current configuration\n"); + printk(KERN_DEBUG "parport_pc: probing current configuration\n"); siofunc = VIA_FUNCTION_PROBE; break; } @@ -2490,12 +2487,11 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, port1 = inb(VIA_CONFIG_DATA) << 2; printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n", - port1); + port1); if (port1 == 0x3BC && have_epp) { outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); outb((0x378 >> 2), VIA_CONFIG_DATA); - printk(KERN_DEBUG - "parport_pc: Parallel port base changed to 0x378\n"); + printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n"); port1 = 0x378; } @@ -2834,14 +2830,12 @@ static int parport_pc_pci_probe(struct pci_dev *dev, /* TODO: test if sharing interrupts works */ irq = dev->irq; if (irq == IRQ_NONE) { - printk(KERN_DEBUG - "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n", - id->vendor, id->device, io_lo, io_hi); + printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n", + id->vendor, id->device, io_lo, io_hi); irq = PARPORT_IRQ_NONE; } else { - printk(KERN_DEBUG - "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n", - id->vendor, id->device, io_lo, io_hi, irq); + printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n", + id->vendor, id->device, io_lo, io_hi, irq); } data->ports[count] = parport_pc_probe_port(io_lo, io_hi, irq, @@ -3113,8 +3107,8 @@ static int __init parport_parse_dma(const char *dmastr, int *val) #ifdef CONFIG_PCI static int __init parport_init_mode_setup(char *str) { - printk(KERN_DEBUG - "parport_pc.c: Specified parameter parport_init_mode=%s\n", str); + printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", + str); if (!strcmp(str, "spp")) parport_init_mode = 1; diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c index 10ed0d174080..7e6d713fa5ac 100644 --- a/drivers/parport/probe.c +++ b/drivers/parport/probe.c @@ -41,13 +41,13 @@ static void pretty_print(struct parport *port, int device) pr_info("%s", port->name); if (device >= 0) - printk (" (addr %d)", device); + pr_cont(" (addr %d)", device); - printk (": %s", classes[info->class].descr); + pr_cont(": %s", classes[info->class].descr); if (info->class) - printk(", %s %s", info->mfr, info->model); + pr_cont(", %s %s", info->mfr, info->model); - printk("\n"); + pr_cont("\n"); } static void parse_data(struct parport *port, int device, char *str) @@ -178,9 +178,8 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer, * just return constant nibble forever. This catches * also those cases. */ if (idlens[0] == 0 || idlens[0] > 0xFFF) { - printk (KERN_DEBUG "%s: reported broken Device ID" - " length of %#zX bytes\n", - port->name, idlens[0]); + printk(KERN_DEBUG "%s: reported broken Device ID length of %#zX bytes\n", + port->name, idlens[0]); return -EIO; } numidlens = 2; @@ -202,10 +201,8 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer, if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) { if (belen != len) { - printk (KERN_DEBUG "%s: Device ID was %zd bytes" - " while device told it would be %d" - " bytes\n", - port->name, len, belen); + printk(KERN_DEBUG "%s: Device ID was %zd bytes while device told it would be %d bytes\n", + port->name, len, belen); } goto done; } @@ -215,11 +212,9 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer, * the first 256 bytes or so that we must have read so * far. */ if (buffer[len-1] == ';') { - printk (KERN_DEBUG "%s: Device ID reading stopped" - " before device told data not available. " - "Current idlen %u of %u, len bytes %02X %02X\n", - port->name, current_idlen, numidlens, - length[0], length[1]); + printk(KERN_DEBUG "%s: Device ID reading stopped before device told data not available. Current idlen %u of %u, len bytes %02X %02X\n", + port->name, current_idlen, numidlens, + length[0], length[1]); goto done; } } diff --git a/drivers/parport/share.c b/drivers/parport/share.c index b0f4513251ee..3169feebdc19 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -720,8 +720,7 @@ parport_register_device(struct parport *port, const char *name, if (port->physport->flags & PARPORT_FLAG_EXCL) { /* An exclusive device is registered. */ - printk(KERN_DEBUG "%s: no more devices allowed\n", - port->name); + printk(KERN_DEBUG "%s: no more devices allowed\n", port->name); return NULL; } @@ -789,9 +788,8 @@ parport_register_device(struct parport *port, const char *name, if (flags & PARPORT_DEV_EXCL) { if (port->physport->devices) { spin_unlock(&port->physport->pardevice_lock); - printk(KERN_DEBUG - "%s: cannot grant exclusive access for device %s\n", - port->name, name); + printk(KERN_DEBUG "%s: cannot grant exclusive access for device %s\n", + port->name, name); goto out_free_all; } port->flags |= PARPORT_FLAG_EXCL; @@ -1259,7 +1257,8 @@ int parport_claim_or_block(struct pardevice *dev) r = parport_claim(dev); if (r == -EAGAIN) { #ifdef PARPORT_DEBUG_SHARING - printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n", dev->name); + printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n", + dev->name); #endif /* * FIXME!!! Use the proper locking for dev->waiting, @@ -1292,7 +1291,7 @@ int parport_claim_or_block(struct pardevice *dev) if (dev->port->physport->cad != dev) printk(KERN_DEBUG "%s: exiting parport_claim_or_block but %s owns port!\n", dev->name, dev->port->physport->cad ? - dev->port->physport->cad->name:"nobody"); + dev->port->physport->cad->name : "nobody"); #endif } dev->waiting = 0; -- cgit v1.2.3 From 88c5cbdef8d2ec6f94701c0bacb9f90c8a7a8cd5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:18 +0100 Subject: parport: daisy: Convert DPRINTK to pr_debug Use a more common logging style. Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-4-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/daisy.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c index f87cc802167e..6d78ec3a762f 100644 --- a/drivers/parport/daisy.c +++ b/drivers/parport/daisy.c @@ -30,12 +30,6 @@ #undef DEBUG -#ifdef DEBUG -#define DPRINTK(stuff...) printk(stuff) -#else -#define DPRINTK(stuff...) -#endif - static struct daisydev { struct daisydev *next; struct parport *port; @@ -321,8 +315,7 @@ static int cpp_daisy(struct parport *port, int cmd) | PARPORT_STATUS_PAPEROUT | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) { - DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff(%02x)\n", - port->name, s); + pr_debug("%s: cpp_daisy: aa5500ff(%02x)\n", port->name, s); return -ENXIO; } @@ -332,8 +325,7 @@ static int cpp_daisy(struct parport *port, int cmd) | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR); if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) { - DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff87(%02x)\n", - port->name, s); + pr_debug("%s: cpp_daisy: aa5500ff87(%02x)\n", port->name, s); return -ENXIO; } @@ -368,7 +360,7 @@ static int cpp_mux(struct parport *port, int cmd) s = parport_read_status(port); if (!(s & PARPORT_STATUS_ACK)) { - DPRINTK(KERN_DEBUG "%s: cpp_mux: aa55f00f52ad%02x(%02x)\n", + pr_debug("%s: cpp_mux: aa55f00f52ad%02x(%02x)\n", port->name, cmd, s); return -EIO; } @@ -454,8 +446,7 @@ static int assign_addrs(struct parport *port) | PARPORT_STATUS_PAPEROUT | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) { - DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff(%02x)\n", - port->name, s); + pr_debug("%s: assign_addrs: aa5500ff(%02x)\n", port->name, s); return 0; } @@ -465,8 +456,7 @@ static int assign_addrs(struct parport *port) | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR); if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) { - DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff87(%02x)\n", - port->name, s); + pr_debug("%s: assign_addrs: aa5500ff87(%02x)\n", port->name, s); return 0; } @@ -503,8 +493,7 @@ static int assign_addrs(struct parport *port) parport_write_data(port, 0xff); udelay(2); detected = numdevs - thisdev; - DPRINTK(KERN_DEBUG "%s: Found %d daisy-chained devices\n", port->name, - detected); + pr_debug("%s: Found %d daisy-chained devices\n", port->name, detected); /* Ask the new devices to introduce themselves. */ deviceid = kmalloc(1024, GFP_KERNEL); -- cgit v1.2.3 From 45a272bc018d86ec519fbbefae2f4b2308c0e232 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:19 +0100 Subject: parport_amiga: Convert DPRINTK to pr_debug Use a more common logging style. Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-5-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_amiga.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c index 8c7a598abcff..1e88bcfe0d7b 100644 --- a/drivers/parport/parport_amiga.c +++ b/drivers/parport/parport_amiga.c @@ -28,16 +28,10 @@ #include #undef DEBUG -#ifdef DEBUG -#define DPRINTK printk -#else -#define DPRINTK(x...) do { } while (0) -#endif - static void amiga_write_data(struct parport *p, unsigned char data) { - DPRINTK(KERN_DEBUG "write_data %c\n",data); + pr_debug("write_data %c\n", data); /* Triggers also /STROBE. This behavior cannot be changed */ ciaa.prb = data; mb(); @@ -59,13 +53,13 @@ static unsigned char control_amiga_to_pc(unsigned char control) static void amiga_write_control(struct parport *p, unsigned char control) { - DPRINTK(KERN_DEBUG "write_control %02x\n",control); + pr_debug("write_control %02x\n", control); /* No implementation possible */ } static unsigned char amiga_read_control( struct parport *p) { - DPRINTK(KERN_DEBUG "read_control \n"); + pr_debug("read_control\n"); return control_amiga_to_pc(0); } @@ -73,7 +67,7 @@ static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, { unsigned char old; - DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val); + pr_debug("frob_control mask %02x, value %02x\n", mask, val); old = amiga_read_control(p); amiga_write_control(p, (old & ~mask) ^ val); return old; @@ -99,7 +93,7 @@ static unsigned char amiga_read_status(struct parport *p) unsigned char status; status = status_amiga_to_pc(ciab.pra & 7); - DPRINTK(KERN_DEBUG "read_status %02x\n", status); + pr_debug("read_status %02x\n", status); return status; } @@ -115,14 +109,14 @@ static void amiga_disable_irq(struct parport *p) static void amiga_data_forward(struct parport *p) { - DPRINTK(KERN_DEBUG "forward\n"); + pr_debug("forward\n"); ciaa.ddrb = 0xff; /* all pins output */ mb(); } static void amiga_data_reverse(struct parport *p) { - DPRINTK(KERN_DEBUG "reverse\n"); + pr_debug("reverse\n"); ciaa.ddrb = 0; /* all pins input */ mb(); } -- cgit v1.2.3 From 46aea0d41cf83690f2b376c260aa04b9e42c40d1 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:20 +0100 Subject: parport_mfc3: Convert DPRINTK to pr_debug Use a more common logging style. Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-6-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_mfc3.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c index 3190ef0f3c81..d6bbe8446301 100644 --- a/drivers/parport/parport_mfc3.c +++ b/drivers/parport/parport_mfc3.c @@ -70,11 +70,6 @@ #define MAX_MFC 5 #undef DEBUG -#ifdef DEBUG -#define DPRINTK printk -#else -static inline int DPRINTK(void *nothing, ...) {return 0;} -#endif static struct parport *this_port[MAX_MFC] = {NULL, }; static volatile int dummy; /* for trigger readds */ @@ -84,7 +79,7 @@ static struct parport_operations pp_mfc3_ops; static void mfc3_write_data(struct parport *p, unsigned char data) { -DPRINTK(KERN_DEBUG "write_data %c\n",data); + pr_debug("write_data %c\n", data); dummy = pia(p)->pprb; /* clears irq bit */ /* Triggers also /STROBE.*/ @@ -128,13 +123,13 @@ static unsigned char control_mfc3_to_pc(unsigned char control) static void mfc3_write_control(struct parport *p, unsigned char control) { -DPRINTK(KERN_DEBUG "write_control %02x\n",control); + pr_debug("write_control %02x\n", control); pia(p)->ppra = (pia(p)->ppra & 0x1f) | control_pc_to_mfc3(control); } static unsigned char mfc3_read_control( struct parport *p) { -DPRINTK(KERN_DEBUG "read_control \n"); + pr_debug("read_control\n"); return control_mfc3_to_pc(pia(p)->ppra & 0xe0); } @@ -142,7 +137,7 @@ static unsigned char mfc3_frob_control( struct parport *p, unsigned char mask, u { unsigned char old; -DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val); + pr_debug("frob_control mask %02x, value %02x\n", mask, val); old = mfc3_read_control(p); mfc3_write_control(p, (old & ~mask) ^ val); return old; @@ -171,7 +166,7 @@ static unsigned char mfc3_read_status(struct parport *p) unsigned char status; status = status_mfc3_to_pc(pia(p)->ppra & 0x1f); -DPRINTK(KERN_DEBUG "read_status %02x\n", status); + pr_debug("read_status %02x\n", status); return status; } @@ -202,7 +197,7 @@ static void mfc3_disable_irq(struct parport *p) static void mfc3_data_forward(struct parport *p) { - DPRINTK(KERN_DEBUG "forward\n"); + pr_debug("forward\n"); pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */ pia(p)->pddrb = 255; /* all pins output */ pia(p)->crb |= PIA_DDR; /* make data register visible - default */ @@ -210,7 +205,7 @@ static void mfc3_data_forward(struct parport *p) static void mfc3_data_reverse(struct parport *p) { - DPRINTK(KERN_DEBUG "reverse\n"); + pr_debug("reverse\n"); pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */ pia(p)->pddrb = 0; /* all pins input */ pia(p)->crb |= PIA_DDR; /* make data register visible - default */ -- cgit v1.2.3 From 7b3992572f4cf66ac80dbbdf4f43b8e7fd443747 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:21 +0100 Subject: parport_pc: Convert DPRINTK to pr_debug Use a more common logging style. Miscellanea: o One message converted from KERN_INFO to KERN_DEBUG Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-7-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_pc.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index ab3b04f32815..aae03b59564f 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -87,13 +87,6 @@ #undef DEBUG -#ifdef DEBUG -#define DPRINTK printk -#else -#define DPRINTK(stuff...) -#endif - - #define NR_SUPERIOS 3 static struct superio_struct { /* For Super-IO chips autodetection */ int io; @@ -118,8 +111,8 @@ static void frob_econtrol(struct parport *pb, unsigned char m, if (m != 0xff) ectr = inb(ECONTROL(pb)); - DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n", - m, v, ectr, (ectr & ~m) ^ v); + pr_debug("frob_econtrol(%02x,%02x): %02x -> %02x\n", + m, v, ectr, (ectr & ~m) ^ v); outb((ectr & ~m) ^ v, ECONTROL(pb)); } @@ -142,7 +135,7 @@ static int change_mode(struct parport *p, int m) unsigned char oecr; int mode; - DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m); + pr_debug("parport change_mode ECP-ISA to mode 0x%02x\n", m); if (!priv->ecr) { printk(KERN_DEBUG "change_mode: but there's no ECR!\n"); @@ -2295,7 +2288,7 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma, int irq; int i; - DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n"); + pr_debug("sio_ite_8872_probe()\n"); /* make sure which one chip */ for (i = 0; i < 5; i++) { @@ -2360,11 +2353,9 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma, pci_write_config_dword(pdev, 0x9c, ite8872set | (ite8872_irq * 0x11111)); - DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq); - DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n", - ite8872_lpt); - DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n", - ite8872_lpthi); + pr_debug("ITE887x: The IRQ is %d\n", ite8872_irq); + pr_debug("ITE887x: The PARALLEL I/O port is 0x%x\n", ite8872_lpt); + pr_debug("ITE887x: The PARALLEL I/O porthi is 0x%x\n", ite8872_lpthi); /* Let the user (or defaults) steer us away from interrupts */ irq = ite8872_irq; -- cgit v1.2.3 From a6abfdff4fe5dd19d1f1b37d72ba34cd4492fd4d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 3 Apr 2020 14:43:22 +0100 Subject: parport: Standardize use of printmode Standardize the define and the uses of printmode. Miscellanea: o Add missing statement termination ; where necessary Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-8-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_gsc.c | 8 ++++++-- drivers/parport/parport_pc.c | 14 ++++++-------- drivers/parport/procfs.c | 6 +++++- 3 files changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index cb6a08bee3c7..9228e8f90309 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -299,12 +299,16 @@ struct parport *parport_gsc_probe_port(unsigned long base, p->dma = PARPORT_DMA_NONE; pr_cont(" ["); -#define printmode(x) {if(p->modes&PARPORT_MODE_##x){pr_cont("%s%s",f?",":"",#x);f++;}} +#define printmode(x) \ +do { \ + if (p->modes & PARPORT_MODE_##x) \ + pr_cont("%s%s", f++ ? "," : "", #x); \ +} while (0) { int f = 0; printmode(PCSPP); printmode(TRISTATE); - printmode(COMPAT) + printmode(COMPAT); printmode(EPP); // printmode(ECP); // printmode(DMA); diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index aae03b59564f..77e37e3cb3a0 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2134,19 +2134,17 @@ struct parport *parport_pc_probe_port(unsigned long int base, pr_cont(" ["); -#define printmode(x) \ - {\ - if (p->modes & PARPORT_MODE_##x) {\ - pr_cont("%s%s", f ? "," : "", #x); \ - f++;\ - } \ - } +#define printmode(x) \ +do { \ + if (p->modes & PARPORT_MODE_##x) \ + pr_cont("%s%s", f++ ? "," : "", #x); \ +} while (0) { int f = 0; printmode(PCSPP); printmode(TRISTATE); - printmode(COMPAT) + printmode(COMPAT); printmode(EPP); printmode(ECP); printmode(DMA); diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c index 48804049d697..e957beb94f14 100644 --- a/drivers/parport/procfs.c +++ b/drivers/parport/procfs.c @@ -213,7 +213,11 @@ static int do_hardware_modes(struct ctl_table *table, int write, return -EACCES; { -#define printmode(x) {if(port->modes&PARPORT_MODE_##x){len+=sprintf(buffer+len,"%s%s",f?",":"",#x);f++;}} +#define printmode(x) \ +do { \ + if (port->modes & PARPORT_MODE_##x) \ + len += sprintf(buffer + len, "%s%s", f++ ? "," : "", #x); \ +} while (0) int f = 0; printmode(PCSPP); printmode(TRISTATE); -- cgit v1.2.3 From 6824f0ce38cb4b903a3cbf00dd528861f6c2ea7c Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Fri, 3 Apr 2020 14:43:23 +0100 Subject: parport: Add comments for parport_register_dev_model() In preparation to remove parport_register_device(), copy the comments to parport_register_dev_model() and modify the parameters according to what parport_register_dev_model() has. Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-9-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/share.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/parport.h | 4 ++++ 2 files changed, 66 insertions(+) (limited to 'drivers/parport') diff --git a/drivers/parport/share.c b/drivers/parport/share.c index 3169feebdc19..ee2892a935d6 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -841,6 +841,68 @@ static void free_pardevice(struct device *dev) kfree(par_dev); } +/** + * parport_register_dev_model - register a device on a parallel port + * @port: port to which the device is attached + * @name: a name to refer to the device + * @par_dev_cb: struct containing callbacks + * @id: device number to be given to the device + * + * This function, called by parallel port device drivers, + * declares that a device is connected to a port, and tells the + * system all it needs to know. + * + * The struct pardev_cb contains pointer to callbacks. preemption + * callback function, @preempt, is called when this device driver + * has claimed access to the port but another device driver wants + * to use it. It is given, @private, as its parameter, and should + * return zero if it is willing for the system to release the port + * to another driver on its behalf. If it wants to keep control of + * the port it should return non-zero, and no action will be taken. + * It is good manners for the driver to try to release the port at + * the earliest opportunity after its preemption callback rejects a + * preemption attempt. Note that if a preemption callback is happy + * for preemption to go ahead, there is no need to release the + * port; it is done automatically. This function may not block, as + * it may be called from interrupt context. If the device driver + * does not support preemption, @preempt can be %NULL. + * + * The wake-up ("kick") callback function, @wakeup, is called when + * the port is available to be claimed for exclusive access; that + * is, parport_claim() is guaranteed to succeed when called from + * inside the wake-up callback function. If the driver wants to + * claim the port it should do so; otherwise, it need not take + * any action. This function may not block, as it may be called + * from interrupt context. If the device driver does not want to + * be explicitly invited to claim the port in this way, @wakeup can + * be %NULL. + * + * The interrupt handler, @irq_func, is called when an interrupt + * arrives from the parallel port. Note that if a device driver + * wants to use interrupts it should use parport_enable_irq(), + * and can also check the irq member of the parport structure + * representing the port. + * + * The parallel port (lowlevel) driver is the one that has called + * request_irq() and whose interrupt handler is called first. + * This handler does whatever needs to be done to the hardware to + * acknowledge the interrupt (for PC-style ports there is nothing + * special to be done). It then tells the IEEE 1284 code about + * the interrupt, which may involve reacting to an IEEE 1284 + * event depending on the current IEEE 1284 phase. After this, + * it calls @irq_func. Needless to say, @irq_func will be called + * from interrupt context, and may not block. + * + * The %PARPORT_DEV_EXCL flag is for preventing port sharing, and + * so should only be used when sharing the port with other device + * drivers is impossible and would lead to incorrect behaviour. + * Use it sparingly! Normally, @flags will be zero. + * + * This function returns a pointer to a structure that represents + * the device on the port, or %NULL if there is not enough memory + * to allocate space for that structure. + **/ + struct pardevice * parport_register_dev_model(struct parport *port, const char *name, const struct pardev_cb *par_dev_cb, int id) diff --git a/include/linux/parport.h b/include/linux/parport.h index 13932ce8b37b..36a0f6270238 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -337,6 +337,10 @@ struct pardevice *parport_register_device(struct parport *port, void (*irq_func)(void *), int flags, void *handle); +/* + * parport_register_dev_model declares that a device is connected to a + * port, and tells the kernel all it needs to know. + */ struct pardevice * parport_register_dev_model(struct parport *port, const char *name, const struct pardev_cb *par_dev_cb, int cnt); -- cgit v1.2.3 From bae9defb06a781083844cafd0a359f423cd98388 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Fri, 3 Apr 2020 14:43:24 +0100 Subject: parport: remove unused parport_register_device() All the drivers that are using parallel port has been converted to use the new device model api, and parport_register_device() is no longer used. Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-10-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/share.c | 192 ------------------------------------------------ include/linux/parport.h | 12 --- 2 files changed, 204 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/share.c b/drivers/parport/share.c index ee2892a935d6..661f623b3129 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -641,198 +641,6 @@ void parport_remove_port(struct parport *port) } EXPORT_SYMBOL(parport_remove_port); -/** - * parport_register_device - register a device on a parallel port - * @port: port to which the device is attached - * @name: a name to refer to the device - * @pf: preemption callback - * @kf: kick callback (wake-up) - * @irq_func: interrupt handler - * @flags: registration flags - * @handle: data for callback functions - * - * This function, called by parallel port device drivers, - * declares that a device is connected to a port, and tells the - * system all it needs to know. - * - * The @name is allocated by the caller and must not be - * deallocated until the caller calls @parport_unregister_device - * for that device. - * - * The preemption callback function, @pf, is called when this - * device driver has claimed access to the port but another - * device driver wants to use it. It is given @handle as its - * parameter, and should return zero if it is willing for the - * system to release the port to another driver on its behalf. - * If it wants to keep control of the port it should return - * non-zero, and no action will be taken. It is good manners for - * the driver to try to release the port at the earliest - * opportunity after its preemption callback rejects a preemption - * attempt. Note that if a preemption callback is happy for - * preemption to go ahead, there is no need to release the port; - * it is done automatically. This function may not block, as it - * may be called from interrupt context. If the device driver - * does not support preemption, @pf can be %NULL. - * - * The wake-up ("kick") callback function, @kf, is called when - * the port is available to be claimed for exclusive access; that - * is, parport_claim() is guaranteed to succeed when called from - * inside the wake-up callback function. If the driver wants to - * claim the port it should do so; otherwise, it need not take - * any action. This function may not block, as it may be called - * from interrupt context. If the device driver does not want to - * be explicitly invited to claim the port in this way, @kf can - * be %NULL. - * - * The interrupt handler, @irq_func, is called when an interrupt - * arrives from the parallel port. Note that if a device driver - * wants to use interrupts it should use parport_enable_irq(), - * and can also check the irq member of the parport structure - * representing the port. - * - * The parallel port (lowlevel) driver is the one that has called - * request_irq() and whose interrupt handler is called first. - * This handler does whatever needs to be done to the hardware to - * acknowledge the interrupt (for PC-style ports there is nothing - * special to be done). It then tells the IEEE 1284 code about - * the interrupt, which may involve reacting to an IEEE 1284 - * event depending on the current IEEE 1284 phase. After this, - * it calls @irq_func. Needless to say, @irq_func will be called - * from interrupt context, and may not block. - * - * The %PARPORT_DEV_EXCL flag is for preventing port sharing, and - * so should only be used when sharing the port with other device - * drivers is impossible and would lead to incorrect behaviour. - * Use it sparingly! Normally, @flags will be zero. - * - * This function returns a pointer to a structure that represents - * the device on the port, or %NULL if there is not enough memory - * to allocate space for that structure. - **/ - -struct pardevice * -parport_register_device(struct parport *port, const char *name, - int (*pf)(void *), void (*kf)(void *), - void (*irq_func)(void *), - int flags, void *handle) -{ - struct pardevice *tmp; - - if (port->physport->flags & PARPORT_FLAG_EXCL) { - /* An exclusive device is registered. */ - printk(KERN_DEBUG "%s: no more devices allowed\n", port->name); - return NULL; - } - - if (flags & PARPORT_DEV_LURK) { - if (!pf || !kf) { - pr_info("%s: refused to register lurking device (%s) without callbacks\n", - port->name, name); - return NULL; - } - } - - if (flags & PARPORT_DEV_EXCL) { - if (port->physport->devices) { - /* - * If a device is already registered and this new - * device wants exclusive access, then no need to - * continue as we can not grant exclusive access to - * this device. - */ - pr_err("%s: cannot grant exclusive access for device %s\n", - port->name, name); - return NULL; - } - } - - /* - * We up our own module reference count, and that of the port - * on which a device is to be registered, to ensure that - * neither of us gets unloaded while we sleep in (e.g.) - * kmalloc. - */ - if (!try_module_get(port->ops->owner)) - return NULL; - - parport_get_port(port); - - tmp = kmalloc(sizeof(struct pardevice), GFP_KERNEL); - if (!tmp) - goto out; - - tmp->state = kmalloc(sizeof(struct parport_state), GFP_KERNEL); - if (!tmp->state) - goto out_free_pardevice; - - tmp->name = name; - tmp->port = port; - tmp->daisy = -1; - tmp->preempt = pf; - tmp->wakeup = kf; - tmp->private = handle; - tmp->flags = flags; - tmp->irq_func = irq_func; - tmp->waiting = 0; - tmp->timeout = 5 * HZ; - tmp->devmodel = false; - - /* Chain this onto the list */ - tmp->prev = NULL; - /* - * This function must not run from an irq handler so we don' t need - * to clear irq on the local CPU. -arca - */ - spin_lock(&port->physport->pardevice_lock); - - if (flags & PARPORT_DEV_EXCL) { - if (port->physport->devices) { - spin_unlock(&port->physport->pardevice_lock); - printk(KERN_DEBUG "%s: cannot grant exclusive access for device %s\n", - port->name, name); - goto out_free_all; - } - port->flags |= PARPORT_FLAG_EXCL; - } - - tmp->next = port->physport->devices; - wmb(); /* - * Make sure that tmp->next is written before it's - * added to the list; see comments marked 'no locking - * required' - */ - if (port->physport->devices) - port->physport->devices->prev = tmp; - port->physport->devices = tmp; - spin_unlock(&port->physport->pardevice_lock); - - init_waitqueue_head(&tmp->wait_q); - tmp->timeslice = parport_default_timeslice; - tmp->waitnext = tmp->waitprev = NULL; - - /* - * This has to be run as last thing since init_state may need other - * pardevice fields. -arca - */ - port->ops->init_state(tmp, tmp->state); - if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) { - port->proc_device = tmp; - parport_device_proc_register(tmp); - } - return tmp; - - out_free_all: - kfree(tmp->state); - out_free_pardevice: - kfree(tmp); - out: - parport_put_port(port); - module_put(port->ops->owner); - - return NULL; -} -EXPORT_SYMBOL(parport_register_device); - static void free_pardevice(struct device *dev) { struct pardevice *par_dev = to_pardevice(dev); diff --git a/include/linux/parport.h b/include/linux/parport.h index 36a0f6270238..1fb508c19e83 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -325,18 +325,6 @@ struct pardev_cb { unsigned int flags; }; -/* parport_register_device declares that a device is connected to a - port, and tells the kernel all it needs to know. - - pf is the preemption function (may be NULL for no callback) - - kf is the wake-up function (may be NULL for no callback) - - irq_func is the interrupt handler (may be NULL for no interrupts) - - handle is a user pointer that gets handed to callback functions. */ -struct pardevice *parport_register_device(struct parport *port, - const char *name, - int (*pf)(void *), void (*kf)(void *), - void (*irq_func)(void *), - int flags, void *handle); - /* * parport_register_dev_model declares that a device is connected to a * port, and tells the kernel all it needs to know. -- cgit v1.2.3 From 3275158fa52ad2a795f7f52ba4565ea92660c296 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Fri, 3 Apr 2020 14:43:25 +0100 Subject: parport: remove use of devmodel Now that all the drivers using parallel port has been converted to use device model, there is no driver left which has devmodel as false. Remove the part of the code which expects devmodel can be false. Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-11-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/share.c | 81 +++++++++++++++++-------------------------------- 1 file changed, 28 insertions(+), 53 deletions(-) (limited to 'drivers/parport') diff --git a/drivers/parport/share.c b/drivers/parport/share.c index 661f623b3129..7fec4fefe151 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -278,46 +278,32 @@ static int port_detect(struct device *dev, void *dev_drv) int __parport_register_driver(struct parport_driver *drv, struct module *owner, const char *mod_name) { - if (drv->devmodel) { - /* using device model */ - int ret; - - /* initialize common driver fields */ - drv->driver.name = drv->name; - drv->driver.bus = &parport_bus_type; - drv->driver.owner = owner; - drv->driver.mod_name = mod_name; - ret = driver_register(&drv->driver); - if (ret) - return ret; + /* using device model */ + int ret; - /* - * check if bus has any parallel port registered, if - * none is found then load the lowlevel driver. - */ - ret = bus_for_each_dev(&parport_bus_type, NULL, NULL, - port_detect); - if (!ret) - get_lowlevel_driver(); - - mutex_lock(®istration_lock); - if (drv->match_port) - bus_for_each_dev(&parport_bus_type, NULL, drv, - port_check); - mutex_unlock(®istration_lock); - } else { - struct parport *port; - - drv->devmodel = false; - - if (list_empty(&portlist)) - get_lowlevel_driver(); - mutex_lock(®istration_lock); - list_for_each_entry(port, &portlist, list) - drv->attach(port); - list_add(&drv->list, &drivers); - mutex_unlock(®istration_lock); - } + /* initialize common driver fields */ + drv->driver.name = drv->name; + drv->driver.bus = &parport_bus_type; + drv->driver.owner = owner; + drv->driver.mod_name = mod_name; + ret = driver_register(&drv->driver); + if (ret) + return ret; + + /* + * check if bus has any parallel port registered, if + * none is found then load the lowlevel driver. + */ + ret = bus_for_each_dev(&parport_bus_type, NULL, NULL, + port_detect); + if (!ret) + get_lowlevel_driver(); + + mutex_lock(®istration_lock); + if (drv->match_port) + bus_for_each_dev(&parport_bus_type, NULL, drv, + port_check); + mutex_unlock(®istration_lock); return 0; } @@ -352,17 +338,9 @@ static int port_detach(struct device *dev, void *_drv) void parport_unregister_driver(struct parport_driver *drv) { - struct parport *port; - mutex_lock(®istration_lock); - if (drv->devmodel) { - bus_for_each_dev(&parport_bus_type, NULL, drv, port_detach); - driver_unregister(&drv->driver); - } else { - list_del_init(&drv->list); - list_for_each_entry(port, &portlist, list) - drv->detach(port); - } + bus_for_each_dev(&parport_bus_type, NULL, drv, port_detach); + driver_unregister(&drv->driver); mutex_unlock(®istration_lock); } EXPORT_SYMBOL(parport_unregister_driver); @@ -915,10 +893,7 @@ void parport_unregister_device(struct pardevice *dev) spin_unlock_irq(&port->waitlist_lock); kfree(dev->state); - if (dev->devmodel) - device_unregister(&dev->dev); - else - kfree(dev); + device_unregister(&dev->dev); module_put(port->ops->owner); parport_put_port(port); -- cgit v1.2.3