From b24413180f5600bcb3bb70fbed5cf186b60864bd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 1 Nov 2017 15:07:57 +0100 Subject: License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- drivers/parisc/Makefile | 1 + drivers/parisc/iommu-helpers.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/parisc') diff --git a/drivers/parisc/Makefile b/drivers/parisc/Makefile index f95cab57133a..3cd5e6cb8478 100644 --- a/drivers/parisc/Makefile +++ b/drivers/parisc/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for most of the non-PCI devices in PA-RISC machines # diff --git a/drivers/parisc/iommu-helpers.h b/drivers/parisc/iommu-helpers.h index e56f1569f6c3..0905be256de0 100644 --- a/drivers/parisc/iommu-helpers.h +++ b/drivers/parisc/iommu-helpers.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #include /** -- cgit v1.2.3 From bcf3f1752a622f1372d3252d0fea8855d89812e7 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 12 Dec 2017 21:52:26 +0100 Subject: parisc: Hide Diva-built-in serial aux and graphics card Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by: Helge Deller Cc: # v3.0+ --- drivers/parisc/lba_pci.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'drivers/parisc') diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index a25fed52f7e9..41b740aed3a3 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1692,3 +1692,36 @@ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) iounmap(base_addr); } + +/* + * The design of the Diva management card in rp34x0 machines (rp3410, rp3440) + * seems rushed, so that many built-in components simply don't work. + * The following quirks disable the serial AUX port and the built-in ATI RV100 + * Radeon 7000 graphics card which both don't have any external connectors and + * thus are useless, and even worse, e.g. the AUX port occupies ttyS0 and as + * such makes those machines the only PARISC machines on which we can't use + * ttyS0 as boot console. + */ +static void quirk_diva_ati_card(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1292) + return; + + dev_info(&dev->dev, "Hiding Diva built-in ATI card"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY, + quirk_diva_ati_card); + +static void quirk_diva_aux_disable(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1291) + return; + + dev_info(&dev->dev, "Hiding Diva built-in AUX serial device"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + quirk_diva_aux_disable); -- cgit v1.2.3