From de906af1cf8d5f2e9c461148577ac26dcdaea86e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 21 May 2014 15:29:45 +0200 Subject: net: phy: make of_set_phy_supported work with genphy driver of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. of_set_phy_supported is called right after phy_device_register in the assumption that phy_probe is called from phy_device_register and the features of the phy are already initialized. For the genphy driver this is not true, here phy_probe is called later during phy_connect time. phy_probe will then overwrite all settings done from of_set_phy_supported Fix this by moving of_set_phy_supported to the core phy code and calling it from phy_probe. Signed-off-by: Sascha Hauer Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 26 -------------------------- 1 file changed, 26 deletions(-) (limited to 'drivers/of/of_mdio.c') diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 4c1e01ed16dc..b85709458639 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -23,27 +23,6 @@ MODULE_AUTHOR("Grant Likely "); MODULE_LICENSE("GPL"); -static void of_set_phy_supported(struct phy_device *phydev, u32 max_speed) -{ - /* The default values for phydev->supported are provided by the PHY - * driver "features" member, we want to reset to sane defaults fist - * before supporting higher speeds. - */ - phydev->supported &= PHY_DEFAULT_FEATURES; - - switch (max_speed) { - default: - return; - - case SPEED_1000: - phydev->supported |= PHY_1000BT_FEATURES; - case SPEED_100: - phydev->supported |= PHY_100BT_FEATURES; - case SPEED_10: - phydev->supported |= PHY_10BT_FEATURES; - } -} - /* Extract the clause 22 phy ID from the compatible string of the form * ethernet-phy-idAAAA.BBBB */ static int of_get_phy_id(struct device_node *device, u32 *phy_id) @@ -104,11 +83,6 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *chi return 1; } - /* Set phydev->supported based on the "max-speed" property - * if present */ - if (!of_property_read_u32(child, "max-speed", &max_speed)) - of_set_phy_supported(phy, max_speed); - dev_dbg(&mdio->dev, "registered phy %s at address %i\n", child->name, addr); -- cgit v1.2.3