From 58cf663f0e962a51f051a84e38be281335bdf1fd Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Wed, 12 Mar 2014 00:38:40 +0000 Subject: ixgbe: Add bit to mark service task initialization There needs to be an indication when the service task has been initialized. This is because register access prior to that time can detect a removal and attempt to schedule the service task. Adding the __IXGBE_SERVICE_INITED bit allows this to be checked and if not set prevent the service task scheduling. By checking for a removal right after initialization, the probe can be failed at that point without getting the service task involved. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 1 + drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 15 ++++++++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 55c53a1cbb62..1a12c1dd7a27 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -811,6 +811,7 @@ enum ixgbe_state_t { __IXGBE_DISABLED, __IXGBE_REMOVING, __IXGBE_SERVICE_SCHED, + __IXGBE_SERVICE_INITED, __IXGBE_IN_SFP_INIT, __IXGBE_PTP_RUNNING, __IXGBE_PTP_TX_IN_PROGRESS, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 8436c651b735..00c9308455b8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -297,7 +297,8 @@ static void ixgbe_remove_adapter(struct ixgbe_hw *hw) return; hw->hw_addr = NULL; e_dev_err("Adapter removed\n"); - ixgbe_service_event_schedule(adapter); + if (test_bit(__IXGBE_SERVICE_INITED, &adapter->state)) + ixgbe_service_event_schedule(adapter); } void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg) @@ -8023,6 +8024,10 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* EEPROM */ memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops)); eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (ixgbe_removed(hw->hw_addr)) { + err = -EIO; + goto err_ioremap; + } /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */ if (!(eec & (1 << 8))) hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic; @@ -8185,7 +8190,12 @@ skip_sriov: setup_timer(&adapter->service_timer, &ixgbe_service_timer, (unsigned long) adapter); + if (ixgbe_removed(hw->hw_addr)) { + err = -EIO; + goto err_sw_init; + } INIT_WORK(&adapter->service_task, ixgbe_service_task); + set_bit(__IXGBE_SERVICE_INITED, &adapter->state); clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); err = ixgbe_init_interrupt_scheme(adapter); @@ -8494,6 +8504,9 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, skip_bad_vf_detection: #endif /* CONFIG_PCI_IOV */ + if (!test_bit(__IXGBE_SERVICE_INITED, &adapter->state)) + return PCI_ERS_RESULT_DISCONNECT; + rtnl_lock(); netif_device_detach(netdev); -- cgit v1.2.3 From 2049e1f6f5e6720b182c42695dbdef071804226e Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:27 +0000 Subject: ixgbe: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 00c9308455b8..c4c526b7f99f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6510,6 +6510,7 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring, struct sk_buff *skb = first->skb; u32 vlan_macip_lens, type_tucmd; u32 mss_l4len_idx, l4len; + int err; if (skb->ip_summed != CHECKSUM_PARTIAL) return 0; @@ -6517,11 +6518,9 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring, if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; @@ -7078,8 +7077,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT; if (tx_flags & IXGBE_TX_FLAGS_SW_VLAN) { struct vlan_ethhdr *vhdr; - if (skb_header_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + + if (skb_cow_head(skb, 0)) goto out_drop; vhdr = (struct vlan_ethhdr *)skb->data; vhdr->h_vlan_TCI = htons(tx_flags >> -- cgit v1.2.3 From ea699569b150daa5d5f6c23040da997b83e4cfa3 Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Wed, 12 Mar 2014 00:38:51 +0000 Subject: ixgbevf: Add bit to mark work queue initialization An indication of work queue initialization is needed. This is because register accesses prior to that time can detect a removal and attempt to schedule the watchdog task. Adding the __IXGBEVF_WORK_INIT bit allows this to be checked and if not set prevent the watchdog task scheduling. By checking for a removal right after initialization, the probe can be failed at that point without getting the watchdog task involved. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbevf/ixgbevf.h | 1 + drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 11 ++++++++++- 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h index e7e7d695816b..a0a1de9ce238 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h @@ -421,6 +421,7 @@ enum ixbgevf_state_t { __IXGBEVF_DOWN, __IXGBEVF_DISABLED, __IXGBEVF_REMOVING, + __IXGBEVF_WORK_INIT, }; struct ixgbevf_cb { diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 4ba139b2d25a..905c26cfa600 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -107,7 +107,8 @@ static void ixgbevf_remove_adapter(struct ixgbe_hw *hw) return; hw->hw_addr = NULL; dev_err(&adapter->pdev->dev, "Adapter removed\n"); - schedule_work(&adapter->watchdog_task); + if (test_bit(__IXGBEVF_WORK_INIT, &adapter->state)) + schedule_work(&adapter->watchdog_task); } static void ixgbevf_check_remove(struct ixgbe_hw *hw, u32 reg) @@ -3573,8 +3574,13 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->watchdog_timer.function = ixgbevf_watchdog; adapter->watchdog_timer.data = (unsigned long)adapter; + if (IXGBE_REMOVED(hw->hw_addr)) { + err = -EIO; + goto err_sw_init; + } INIT_WORK(&adapter->reset_task, ixgbevf_reset_task); INIT_WORK(&adapter->watchdog_task, ixgbevf_watchdog_task); + set_bit(__IXGBEVF_WORK_INIT, &adapter->state); err = ixgbevf_init_interrupt_scheme(adapter); if (err) @@ -3667,6 +3673,9 @@ static pci_ers_result_t ixgbevf_io_error_detected(struct pci_dev *pdev, struct net_device *netdev = pci_get_drvdata(pdev); struct ixgbevf_adapter *adapter = netdev_priv(netdev); + if (!test_bit(__IXGBEVF_WORK_INIT, &adapter->state)) + return PCI_ERS_RESULT_DISCONNECT; + rtnl_lock(); netif_device_detach(netdev); -- cgit v1.2.3 From 8f12c0348397ee69af33fc8973b687d83a8759dc Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:32 +0000 Subject: ixgbevf: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 905c26cfa600..d0799e8e31e4 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -2839,6 +2839,7 @@ static int ixgbevf_tso(struct ixgbevf_ring *tx_ring, struct sk_buff *skb = first->skb; u32 vlan_macip_lens, type_tucmd; u32 mss_l4len_idx, l4len; + int err; if (skb->ip_summed != CHECKSUM_PARTIAL) return 0; @@ -2846,11 +2847,9 @@ static int ixgbevf_tso(struct ixgbevf_ring *tx_ring, if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; -- cgit v1.2.3 From 7dc86605a28066bc7e99b2ce009af8cb07282505 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 2 Apr 2014 10:33:17 +0000 Subject: e1000: remove debug messages with function names e1000_hw.c contains a lot of debug messages which print name of invoked function and contain no new line character at the end. Remove them as equivalent information can be nowadays obtained using function tracer. Reported-by: Joe Perches Signed-off-by: Jakub Kicinski Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_hw.c | 124 ---------------------------- 1 file changed, 124 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index 2879b9631e15..c1d3fdb296a0 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -115,8 +115,6 @@ static DEFINE_SPINLOCK(e1000_phy_lock); */ static s32 e1000_set_phy_type(struct e1000_hw *hw) { - e_dbg("e1000_set_phy_type"); - if (hw->mac_type == e1000_undefined) return -E1000_ERR_PHY_TYPE; @@ -159,8 +157,6 @@ static void e1000_phy_init_script(struct e1000_hw *hw) u32 ret_val; u16 phy_saved_data; - e_dbg("e1000_phy_init_script"); - if (hw->phy_init_script) { msleep(20); @@ -253,8 +249,6 @@ static void e1000_phy_init_script(struct e1000_hw *hw) */ s32 e1000_set_mac_type(struct e1000_hw *hw) { - e_dbg("e1000_set_mac_type"); - switch (hw->device_id) { case E1000_DEV_ID_82542: switch (hw->revision_id) { @@ -365,8 +359,6 @@ void e1000_set_media_type(struct e1000_hw *hw) { u32 status; - e_dbg("e1000_set_media_type"); - if (hw->mac_type != e1000_82543) { /* tbi_compatibility is only valid on 82543 */ hw->tbi_compatibility_en = false; @@ -415,8 +407,6 @@ s32 e1000_reset_hw(struct e1000_hw *hw) u32 led_ctrl; s32 ret_val; - e_dbg("e1000_reset_hw"); - /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ if (hw->mac_type == e1000_82542_rev2_0) { e_dbg("Disabling MWI on 82542 rev 2.0\n"); @@ -566,8 +556,6 @@ s32 e1000_init_hw(struct e1000_hw *hw) u32 mta_size; u32 ctrl_ext; - e_dbg("e1000_init_hw"); - /* Initialize Identification LED */ ret_val = e1000_id_led_init(hw); if (ret_val) { @@ -683,8 +671,6 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) u16 eeprom_data; s32 ret_val; - e_dbg("e1000_adjust_serdes_amplitude"); - if (hw->media_type != e1000_media_type_internal_serdes) return E1000_SUCCESS; @@ -730,8 +716,6 @@ s32 e1000_setup_link(struct e1000_hw *hw) s32 ret_val; u16 eeprom_data; - e_dbg("e1000_setup_link"); - /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or @@ -848,8 +832,6 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) u32 signal = 0; s32 ret_val; - e_dbg("e1000_setup_fiber_serdes_link"); - /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. @@ -1051,8 +1033,6 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_preconfig"); - ctrl = er32(CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to * what the PHY speed and duplex configuration is. In addition, we need @@ -1112,8 +1092,6 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_igp_setup"); - if (hw->phy_reset_disable) return E1000_SUCCESS; @@ -1254,8 +1232,6 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_mgp_setup"); - if (hw->phy_reset_disable) return E1000_SUCCESS; @@ -1362,8 +1338,6 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_autoneg"); - /* Perform some bounds checking on the hw->autoneg_advertised * parameter. If this variable is zero, then set it to the default. */ @@ -1432,7 +1406,6 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) { s32 ret_val; - e_dbg("e1000_copper_link_postconfig"); if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) { e1000_config_collision_dist(hw); @@ -1473,8 +1446,6 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw) u16 i; u16 phy_data; - e_dbg("e1000_setup_copper_link"); - /* Check if it is a valid PHY and set PHY mode if necessary. */ ret_val = e1000_copper_link_preconfig(hw); if (ret_val) @@ -1554,8 +1525,6 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) u16 mii_autoneg_adv_reg; u16 mii_1000t_ctrl_reg; - e_dbg("e1000_phy_setup_autoneg"); - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); if (ret_val) @@ -1707,8 +1676,6 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) u16 phy_data; u16 i; - e_dbg("e1000_phy_force_speed_duplex"); - /* Turn off Flow control if we are forcing speed and duplex. */ hw->fc = E1000_FC_NONE; @@ -1939,8 +1906,6 @@ void e1000_config_collision_dist(struct e1000_hw *hw) { u32 tctl, coll_dist; - e_dbg("e1000_config_collision_dist"); - if (hw->mac_type < e1000_82543) coll_dist = E1000_COLLISION_DISTANCE_82542; else @@ -1970,8 +1935,6 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_config_mac_to_phy"); - /* 82544 or newer MAC, Auto Speed Detection takes care of * MAC speed/duplex configuration. */ @@ -2049,8 +2012,6 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw) { u32 ctrl; - e_dbg("e1000_force_mac_fc"); - /* Get the current configuration of the Device Control Register */ ctrl = er32(CTRL); @@ -2120,8 +2081,6 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) u16 speed; u16 duplex; - e_dbg("e1000_config_fc_after_link_up"); - /* Check for the case where we have fiber media and auto-neg failed * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. @@ -2337,8 +2296,6 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) u32 status; s32 ret_val = E1000_SUCCESS; - e_dbg("e1000_check_for_serdes_link_generic"); - ctrl = er32(CTRL); status = er32(STATUS); rxcw = er32(RXCW); @@ -2449,8 +2406,6 @@ s32 e1000_check_for_link(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_check_for_link"); - ctrl = er32(CTRL); status = er32(STATUS); @@ -2632,8 +2587,6 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) s32 ret_val; u16 phy_data; - e_dbg("e1000_get_speed_and_duplex"); - if (hw->mac_type >= e1000_82543) { status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { @@ -2699,7 +2652,6 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) u16 i; u16 phy_data; - e_dbg("e1000_wait_autoneg"); e_dbg("Waiting for Auto-Neg to complete.\n"); /* We will wait for autoneg to complete or 4.5 seconds to expire. */ @@ -2866,8 +2818,6 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) u32 ret_val; unsigned long flags; - e_dbg("e1000_read_phy_reg"); - spin_lock_irqsave(&e1000_phy_lock, flags); if ((hw->phy_type == e1000_phy_igp) && @@ -2894,8 +2844,6 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u32 mdic = 0; const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; - e_dbg("e1000_read_phy_reg_ex"); - if (reg_addr > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; @@ -3008,8 +2956,6 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) u32 ret_val; unsigned long flags; - e_dbg("e1000_write_phy_reg"); - spin_lock_irqsave(&e1000_phy_lock, flags); if ((hw->phy_type == e1000_phy_igp) && @@ -3036,8 +2982,6 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u32 mdic = 0; const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; - e_dbg("e1000_write_phy_reg_ex"); - if (reg_addr > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; @@ -3129,8 +3073,6 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw) u32 ctrl, ctrl_ext; u32 led_ctrl; - e_dbg("e1000_phy_hw_reset"); - e_dbg("Resetting Phy...\n"); if (hw->mac_type > e1000_82543) { @@ -3189,8 +3131,6 @@ s32 e1000_phy_reset(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_phy_reset"); - switch (hw->phy_type) { case e1000_phy_igp: ret_val = e1000_phy_hw_reset(hw); @@ -3229,8 +3169,6 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw) u16 phy_id_high, phy_id_low; bool match = false; - e_dbg("e1000_detect_gig_phy"); - if (hw->phy_id != 0) return E1000_SUCCESS; @@ -3301,7 +3239,6 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw) static s32 e1000_phy_reset_dsp(struct e1000_hw *hw) { s32 ret_val; - e_dbg("e1000_phy_reset_dsp"); do { ret_val = e1000_write_phy_reg(hw, 29, 0x001d); @@ -3333,8 +3270,6 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, u16 phy_data, min_length, max_length, average; e1000_rev_polarity polarity; - e_dbg("e1000_phy_igp_get_info"); - /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ @@ -3414,8 +3349,6 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, u16 phy_data; e1000_rev_polarity polarity; - e_dbg("e1000_phy_m88_get_info"); - /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ @@ -3487,8 +3420,6 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) s32 ret_val; u16 phy_data; - e_dbg("e1000_phy_get_info"); - phy_info->cable_length = e1000_cable_length_undefined; phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined; phy_info->cable_polarity = e1000_rev_polarity_undefined; @@ -3527,8 +3458,6 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) s32 e1000_validate_mdi_setting(struct e1000_hw *hw) { - e_dbg("e1000_validate_mdi_settings"); - if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { e_dbg("Invalid MDI setting detected\n"); hw->mdix = 1; @@ -3551,8 +3480,6 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw) s32 ret_val = E1000_SUCCESS; u16 eeprom_size; - e_dbg("e1000_init_eeprom_params"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -3770,8 +3697,6 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw) struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 eecd, i = 0; - e_dbg("e1000_acquire_eeprom"); - eecd = er32(EECD); /* Request EEPROM Access */ @@ -3871,8 +3796,6 @@ static void e1000_release_eeprom(struct e1000_hw *hw) { u32 eecd; - e_dbg("e1000_release_eeprom"); - eecd = er32(EECD); if (hw->eeprom.type == e1000_eeprom_spi) { @@ -3920,8 +3843,6 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) u16 retry_count = 0; u8 spi_stat_reg; - e_dbg("e1000_spi_eeprom_ready"); - /* Read "Status Register" repeatedly until the LSB is cleared. The * EEPROM will signal that the command has been completed by clearing * bit 0 of the internal status register. If it's not cleared within @@ -3974,8 +3895,6 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 i = 0; - e_dbg("e1000_read_eeprom"); - if (hw->mac_type == e1000_ce4100) { GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words, data); @@ -4076,8 +3995,6 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) u16 checksum = 0; u16 i, eeprom_data; - e_dbg("e1000_validate_eeprom_checksum"); - for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { e_dbg("EEPROM Read Error\n"); @@ -4112,8 +4029,6 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) u16 checksum = 0; u16 i, eeprom_data; - e_dbg("e1000_update_eeprom_checksum"); - for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { e_dbg("EEPROM Read Error\n"); @@ -4154,8 +4069,6 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_eeprom_info *eeprom = &hw->eeprom; s32 status = 0; - e_dbg("e1000_write_eeprom"); - if (hw->mac_type == e1000_ce4100) { GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words, data); @@ -4205,8 +4118,6 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_eeprom_info *eeprom = &hw->eeprom; u16 widx = 0; - e_dbg("e1000_write_eeprom_spi"); - while (widx < words) { u8 write_opcode = EEPROM_WRITE_OPCODE_SPI; @@ -4274,8 +4185,6 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, u16 words_written = 0; u16 i = 0; - e_dbg("e1000_write_eeprom_microwire"); - /* Send the write enable command to the EEPROM (3-bit opcode plus * 6/8-bit dummy address beginning with 11). It's less work to include * the 11 of the dummy address as part of the opcode than it is to shift @@ -4354,8 +4263,6 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw) u16 offset; u16 eeprom_data, i; - e_dbg("e1000_read_mac_addr"); - for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { offset = i >> 1; if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { @@ -4394,8 +4301,6 @@ static void e1000_init_rx_addrs(struct e1000_hw *hw) u32 i; u32 rar_num; - e_dbg("e1000_init_rx_addrs"); - /* Setup the receive address. */ e_dbg("Programming MAC Address into RAR[0]\n"); @@ -4553,8 +4458,6 @@ static s32 e1000_id_led_init(struct e1000_hw *hw) u16 eeprom_data, i, temp; const u16 led_mask = 0x0F; - e_dbg("e1000_id_led_init"); - if (hw->mac_type < e1000_82540) { /* Nothing to do */ return E1000_SUCCESS; @@ -4626,8 +4529,6 @@ s32 e1000_setup_led(struct e1000_hw *hw) u32 ledctl; s32 ret_val = E1000_SUCCESS; - e_dbg("e1000_setup_led"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4678,8 +4579,6 @@ s32 e1000_cleanup_led(struct e1000_hw *hw) { s32 ret_val = E1000_SUCCESS; - e_dbg("e1000_cleanup_led"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4714,8 +4613,6 @@ s32 e1000_led_on(struct e1000_hw *hw) { u32 ctrl = er32(CTRL); - e_dbg("e1000_led_on"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4760,8 +4657,6 @@ s32 e1000_led_off(struct e1000_hw *hw) { u32 ctrl = er32(CTRL); - e_dbg("e1000_led_off"); - switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: @@ -4889,8 +4784,6 @@ static void e1000_clear_hw_cntrs(struct e1000_hw *hw) */ void e1000_reset_adaptive(struct e1000_hw *hw) { - e_dbg("e1000_reset_adaptive"); - if (hw->adaptive_ifs) { if (!hw->ifs_params_forced) { hw->current_ifs_val = 0; @@ -4917,8 +4810,6 @@ void e1000_reset_adaptive(struct e1000_hw *hw) */ void e1000_update_adaptive(struct e1000_hw *hw) { - e_dbg("e1000_update_adaptive"); - if (hw->adaptive_ifs) { if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) { if (hw->tx_packet_delta > MIN_NUM_XMITS) { @@ -5114,8 +5005,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 i, phy_data; u16 cable_length; - e_dbg("e1000_get_cable_length"); - *min_length = *max_length = 0; /* Use old method for Phy older than IGP */ @@ -5231,8 +5120,6 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, s32 ret_val; u16 phy_data; - e_dbg("e1000_check_polarity"); - if (hw->phy_type == e1000_phy_m88) { /* return the Polarity bit in the Status register. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, @@ -5299,8 +5186,6 @@ static s32 e1000_check_downshift(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_check_downshift"); - if (hw->phy_type == e1000_phy_igp) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, &phy_data); @@ -5411,8 +5296,6 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) s32 ret_val; u16 phy_data, phy_saved_data, speed, duplex, i; - e_dbg("e1000_config_dsp_after_link_change"); - if (hw->phy_type != e1000_phy_igp) return E1000_SUCCESS; @@ -5546,8 +5429,6 @@ static s32 e1000_set_phy_mode(struct e1000_hw *hw) s32 ret_val; u16 eeprom_data; - e_dbg("e1000_set_phy_mode"); - if ((hw->mac_type == e1000_82545_rev_3) && (hw->media_type == e1000_media_type_copper)) { ret_val = @@ -5594,7 +5475,6 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) { s32 ret_val; u16 phy_data; - e_dbg("e1000_set_d3_lplu_state"); if (hw->phy_type != e1000_phy_igp) return E1000_SUCCESS; @@ -5699,8 +5579,6 @@ static s32 e1000_set_vco_speed(struct e1000_hw *hw) u16 default_page = 0; u16 phy_data; - e_dbg("e1000_set_vco_speed"); - switch (hw->mac_type) { case e1000_82545_rev_3: case e1000_82546_rev_3: @@ -5872,7 +5750,6 @@ static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw) */ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw) { - e_dbg("e1000_get_auto_rd_done"); msleep(5); return E1000_SUCCESS; } @@ -5887,7 +5764,6 @@ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw) */ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) { - e_dbg("e1000_get_phy_cfg_done"); msleep(10); return E1000_SUCCESS; } -- cgit v1.2.3 From 4a54b1e598e71466e6553f4b3972f9bd97fa81d5 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:37 +0000 Subject: e1000: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_main.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 46e6544ed1b7..27058dfe418b 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -2682,14 +2682,13 @@ static int e1000_tso(struct e1000_adapter *adapter, u32 cmd_length = 0; u16 ipcse = 0, tucse, mss; u8 ipcss, ipcso, tucss, tucso, hdr_len; - int err; if (skb_is_gso(skb)) { - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + int err; + + err = skb_cow_head(skb, 0); + if (err < 0) + return err; hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; -- cgit v1.2.3 From bcf1f57fbffc0869762f0daee7fe1973cc459719 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:43 +0000 Subject: e1000e: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index dce377b59b2c..d50c91e50528 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5100,16 +5100,14 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) u32 cmd_length = 0; u16 ipcse = 0, mss; u8 ipcss, ipcso, tucss, tucso, hdr_len; + int err; if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; -- cgit v1.2.3 From 06c14e5adbccfc2b6e0cfc1f7ce4f4bf73791d28 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:11 +0000 Subject: igb: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 30198185d19a..720ad122b26d 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -4605,6 +4605,7 @@ static int igb_tso(struct igb_ring *tx_ring, struct sk_buff *skb = first->skb; u32 vlan_macip_lens, type_tucmd; u32 mss_l4len_idx, l4len; + int err; if (skb->ip_summed != CHECKSUM_PARTIAL) return 0; @@ -4612,11 +4613,9 @@ static int igb_tso(struct igb_ring *tx_ring, if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP; -- cgit v1.2.3 From 5499a968d49f22ef166a360ffd74364bfb7233d6 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 2 Apr 2014 10:33:33 +0000 Subject: igb: fix last_rx_timestamp usage last_rx_timestamp should be updated only when rx time stamp is read. Also it's only used with NICs that have per-interface time stamping resources so it can be moved to adapter structure and set in igb_ptp_rx_rgtstamp(). Signed-off-by: Jakub Kicinski Acked-by: Matthew Vick Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb.h | 16 +--------------- drivers/net/ethernet/intel/igb/igb_main.c | 4 +++- drivers/net/ethernet/intel/igb/igb_ptp.c | 14 +++++++------- 3 files changed, 11 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 7fbe1e925143..27130065d92a 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -241,7 +241,6 @@ struct igb_ring { struct igb_tx_buffer *tx_buffer_info; struct igb_rx_buffer *rx_buffer_info; }; - unsigned long last_rx_timestamp; void *desc; /* descriptor ring memory */ unsigned long flags; /* ring specific flags */ void __iomem *tail; /* pointer to ring tail register */ @@ -437,6 +436,7 @@ struct igb_adapter { struct hwtstamp_config tstamp_config; unsigned long ptp_tx_start; unsigned long last_rx_ptp_check; + unsigned long last_rx_timestamp; spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; @@ -533,20 +533,6 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter); void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb); void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, unsigned char *va, struct sk_buff *skb); -static inline void igb_ptp_rx_hwtstamp(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS) && - !igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) - igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb); - - /* Update the last_rx_timestamp timer in order to enable watchdog check - * for error case of latched timestamp on a dropped packet. - */ - rx_ring->last_rx_timestamp = jiffies; -} - int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr); int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr); #ifdef CONFIG_IGB_HWMON diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 720ad122b26d..fb98d4602f9d 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -6954,7 +6954,9 @@ static void igb_process_skb_fields(struct igb_ring *rx_ring, igb_rx_checksum(rx_ring, rx_desc, skb); - igb_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS) && + !igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) + igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb); if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) { diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 2cca8fd5e574..9209d652e1c9 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -427,10 +427,8 @@ static void igb_ptp_overflow_check(struct work_struct *work) void igb_ptp_rx_hang(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct igb_ring *rx_ring; u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL); unsigned long rx_event; - int n; if (hw->mac.type != e1000_82576) return; @@ -445,11 +443,8 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter) /* Determine the most recent watchdog or rx_timestamp event */ rx_event = adapter->last_rx_ptp_check; - for (n = 0; n < adapter->num_rx_queues; n++) { - rx_ring = adapter->rx_ring[n]; - if (time_after(rx_ring->last_rx_timestamp, rx_event)) - rx_event = rx_ring->last_rx_timestamp; - } + if (time_after(adapter->last_rx_timestamp, rx_event)) + rx_event = adapter->last_rx_timestamp; /* Only need to read the high RXSTMP register to clear the lock */ if (time_is_before_jiffies(rx_event + 5 * HZ)) { @@ -540,6 +535,11 @@ void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, regval |= (u64)rd32(E1000_RXSTMPH) << 32; igb_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval); + + /* Update the last_rx_timestamp timer in order to enable watchdog check + * for error case of latched timestamp on a dropped packet. + */ + adapter->last_rx_timestamp = jiffies; } /** -- cgit v1.2.3 From 6b8f07b4904b3fcd17dcb91165a218266727b4cf Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:22 +0000 Subject: igbvf: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igbvf/netdev.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index b7ab03a2f28f..d608599e123a 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -1910,20 +1910,18 @@ static int igbvf_tso(struct igbvf_adapter *adapter, struct sk_buff *skb, u32 tx_flags, u8 *hdr_len) { struct e1000_adv_tx_context_desc *context_desc; - unsigned int i; - int err; struct igbvf_buffer *buffer_info; u32 info = 0, tu_cmd = 0; u32 mss_l4len_idx, l4len; + unsigned int i; + int err; + *hdr_len = 0; - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) { - dev_err(&adapter->pdev->dev, - "igbvf_tso returning an error\n"); - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) { + dev_err(&adapter->pdev->dev, "igbvf_tso returning an error\n"); + return err; } l4len = tcp_hdrlen(skb); -- cgit v1.2.3 From a173f045a870cacd3037cb97681dc3ee8ef9f49e Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:16 +0000 Subject: ixgb: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index f42c201f727f..60801273915c 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -1220,17 +1220,15 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) unsigned int i; u8 ipcss, ipcso, tucss, tucso, hdr_len; u16 ipcse, tucse, mss; - int err; if (likely(skb_is_gso(skb))) { struct ixgb_buffer *buffer_info; struct iphdr *iph; + int err; - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; -- cgit v1.2.3 From fe6d4aa437baf185bc98b83eaff229a3ac5d738c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 30 Mar 2014 03:14:53 +0000 Subject: i40evf: remove open-coded skb_cow_head Signed-off-by: Francois Romieu Cc: Jesse Brandeburg Tested-by: Sibai Li Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 53be5f44d015..b9f50f40abe1 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1114,20 +1114,18 @@ static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb, u64 *cd_type_cmd_tso_mss, u32 *cd_tunneling) { u32 cd_cmd, cd_tso_len, cd_mss; + struct ipv6hdr *ipv6h; struct tcphdr *tcph; struct iphdr *iph; u32 l4len; int err; - struct ipv6hdr *ipv6h; if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; if (protocol == htons(ETH_P_IP)) { iph = skb->encapsulation ? inner_ip_hdr(skb) : ip_hdr(skb); -- cgit v1.2.3 From 5b7af02c26d84cf56dfd7e6906e244e31e92d593 Mon Sep 17 00:00:00 2001 From: Mitch A Williams Date: Fri, 28 Mar 2014 06:49:02 +0000 Subject: i40evf: program RSS LUT correctly A recent change broke the RSS LUT programming, causing it to be programmed with all 0. Correct this by actually assigning the incremented value back to the counter variable so that the increment will be remembered by the calling function. While we're at it, add a proper kernel-doc function comment to our helper function. Signed-off-by: Mitch Williams Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index e35e66ffa782..2797548fde0d 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -1412,6 +1412,14 @@ restart_watchdog: schedule_work(&adapter->adminq_task); } +/** + * i40evf_configure_rss - increment to next available tx queue + * @adapter: board private structure + * @j: queue counter + * + * Helper function for RSS programming to increment through available + * queus. Returns the next queue value. + **/ static int next_queue(struct i40evf_adapter *adapter, int j) { j += 1; @@ -1451,10 +1459,14 @@ static void i40evf_configure_rss(struct i40evf_adapter *adapter) /* Populate the LUT with max no. of queues in round robin fashion */ j = adapter->vsi_res->num_queue_pairs; for (i = 0; i <= I40E_VFQF_HLUT_MAX_INDEX; i++) { - lut = next_queue(adapter, j); - lut |= next_queue(adapter, j) << 8; - lut |= next_queue(adapter, j) << 16; - lut |= next_queue(adapter, j) << 24; + j = next_queue(adapter, j); + lut = j; + j = next_queue(adapter, j); + lut |= j << 8; + j = next_queue(adapter, j); + lut |= j << 16; + j = next_queue(adapter, j); + lut |= j << 24; wr32(hw, I40E_VFQF_HLUT(i), lut); } i40e_flush(hw); -- cgit v1.2.3