From 92f7d07d68c1dfcbb80b3259f29dad8efe890803 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 6 Jul 2016 17:35:59 +0800 Subject: r8152: remove the setting of LAN_WAKE_EN The LAN_WAKE_EN is not used to determine if the device could support WOL. It is used to signal a GPIO pin when a WOL event occurs. The WOL still works even though it is disabled. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 0da72d39b4f9..419f4cee432b 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2296,10 +2296,6 @@ static u32 __rtl_get_wol(struct r8152 *tp) u32 ocp_data; u32 wolopts = 0; - ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5); - if (!(ocp_data & LAN_WAKE_EN)) - return 0; - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34); if (ocp_data & LINK_ON_WAKE_EN) wolopts |= WAKE_PHY; @@ -2332,15 +2328,13 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts) ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5); - ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN | LAN_WAKE_EN); + ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN); if (wolopts & WAKE_UCAST) ocp_data |= UWF_EN; if (wolopts & WAKE_BCAST) ocp_data |= BWF_EN; if (wolopts & WAKE_MCAST) ocp_data |= MWF_EN; - if (wolopts & WAKE_ANY) - ocp_data |= LAN_WAKE_EN; ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); -- cgit v1.2.3