From 5377a4160bb65ee4dd11b4b1d081d86d56d92bff Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Thu, 6 Jan 2011 14:29:54 +0000 Subject: e1000: Add support for the CE4100 reference platform This patch adds support for the gigabit phys present on the CE4100 reference platforms. Signed-off-by: Dirk Brandewie Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_hw.c | 328 +++++++++++++++++++++++++++++++--------- drivers/net/e1000/e1000_hw.h | 59 +++++++- drivers/net/e1000/e1000_main.c | 35 +++++ drivers/net/e1000/e1000_osdep.h | 19 ++- 4 files changed, 365 insertions(+), 76 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 77d08e697b74..aed223b1b897 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -130,10 +130,15 @@ static s32 e1000_set_phy_type(struct e1000_hw *hw) if (hw->mac_type == e1000_82541 || hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82547_rev_2) { + hw->mac_type == e1000_82547_rev_2) hw->phy_type = e1000_phy_igp; - break; - } + break; + case RTL8211B_PHY_ID: + hw->phy_type = e1000_phy_8211; + break; + case RTL8201N_PHY_ID: + hw->phy_type = e1000_phy_8201; + break; default: /* Should never have loaded on this device */ hw->phy_type = e1000_phy_undefined; @@ -318,6 +323,9 @@ s32 e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_INTEL_CE4100_GBE: + hw->mac_type = e1000_ce4100; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; @@ -372,6 +380,9 @@ void e1000_set_media_type(struct e1000_hw *hw) case e1000_82542_rev2_1: hw->media_type = e1000_media_type_fiber; break; + case e1000_ce4100: + hw->media_type = e1000_media_type_copper; + break; default: status = er32(STATUS); if (status & E1000_STATUS_TBIMODE) { @@ -460,6 +471,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw) /* Reset is performed on a shadow of the control register */ ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST)); break; + case e1000_ce4100: default: ew32(CTRL, (ctrl | E1000_CTRL_RST)); break; @@ -951,6 +963,67 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) return E1000_SUCCESS; } +/** + * e1000_copper_link_rtl_setup - Copper link setup for e1000_phy_rtl series. + * @hw: Struct containing variables accessed by shared code + * + * Commits changes to PHY configuration by calling e1000_phy_reset(). + */ +static s32 e1000_copper_link_rtl_setup(struct e1000_hw *hw) +{ + s32 ret_val; + + /* SW reset the PHY so all changes take effect */ + ret_val = e1000_phy_reset(hw); + if (ret_val) { + e_dbg("Error Resetting the PHY\n"); + return ret_val; + } + + return E1000_SUCCESS; +} + +static s32 gbe_dhg_phy_setup(struct e1000_hw *hw) +{ + s32 ret_val; + u32 ctrl_aux; + + switch (hw->phy_type) { + case e1000_phy_8211: + ret_val = e1000_copper_link_rtl_setup(hw); + if (ret_val) { + e_dbg("e1000_copper_link_rtl_setup failed!\n"); + return ret_val; + } + break; + case e1000_phy_8201: + /* Set RMII mode */ + ctrl_aux = er32(CTL_AUX); + ctrl_aux |= E1000_CTL_AUX_RMII; + ew32(CTL_AUX, ctrl_aux); + E1000_WRITE_FLUSH(); + + /* Disable the J/K bits required for receive */ + ctrl_aux = er32(CTL_AUX); + ctrl_aux |= 0x4; + ctrl_aux &= ~0x2; + ew32(CTL_AUX, ctrl_aux); + E1000_WRITE_FLUSH(); + ret_val = e1000_copper_link_rtl_setup(hw); + + if (ret_val) { + e_dbg("e1000_copper_link_rtl_setup failed!\n"); + return ret_val; + } + break; + default: + e_dbg("Error Resetting the PHY\n"); + return E1000_ERR_PHY_TYPE; + } + + return E1000_SUCCESS; +} + /** * e1000_copper_link_preconfig - early configuration for copper * @hw: Struct containing variables accessed by shared code @@ -1286,6 +1359,10 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (hw->autoneg_advertised == 0) hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; + /* IFE/RTL8201N PHY only supports 10/100 */ + if (hw->phy_type == e1000_phy_8201) + hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL; + e_dbg("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); if (ret_val) { @@ -1341,7 +1418,7 @@ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) s32 ret_val; e_dbg("e1000_copper_link_postconfig"); - if (hw->mac_type >= e1000_82544) { + if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) { e1000_config_collision_dist(hw); } else { ret_val = e1000_config_mac_to_phy(hw); @@ -1395,6 +1472,12 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw) ret_val = e1000_copper_link_mgp_setup(hw); if (ret_val) return ret_val; + } else { + ret_val = gbe_dhg_phy_setup(hw); + if (ret_val) { + e_dbg("gbe_dhg_phy_setup failed!\n"); + return ret_val; + } } if (hw->autoneg) { @@ -1461,10 +1544,11 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) return ret_val; /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = - e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); if (ret_val) return ret_val; + else if (hw->phy_type == e1000_phy_8201) + mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK; /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for @@ -1577,9 +1661,14 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; + if (hw->phy_type == e1000_phy_8201) { + mii_1000t_ctrl_reg = 0; + } else { + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } return E1000_SUCCESS; } @@ -1860,7 +1949,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) /* 82544 or newer MAC, Auto Speed Detection takes care of * MAC speed/duplex configuration.*/ - if (hw->mac_type >= e1000_82544) + if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) return E1000_SUCCESS; /* Read the Device Control Register and set the bits to Force Speed @@ -1870,27 +1959,49 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); - /* Set up duplex in the Device Control and Transmit Control - * registers depending on negotiated values. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if (ret_val) - return ret_val; + switch (hw->phy_type) { + case e1000_phy_8201: + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if (ret_val) + return ret_val; - if (phy_data & M88E1000_PSSR_DPLX) - ctrl |= E1000_CTRL_FD; - else - ctrl &= ~E1000_CTRL_FD; + if (phy_data & RTL_PHY_CTRL_FD) + ctrl |= E1000_CTRL_FD; + else + ctrl &= ~E1000_CTRL_FD; - e1000_config_collision_dist(hw); + if (phy_data & RTL_PHY_CTRL_SPD_100) + ctrl |= E1000_CTRL_SPD_100; + else + ctrl |= E1000_CTRL_SPD_10; - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) - ctrl |= E1000_CTRL_SPD_1000; - else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) - ctrl |= E1000_CTRL_SPD_100; + e1000_config_collision_dist(hw); + break; + default: + /* Set up duplex in the Device Control and Transmit Control + * registers depending on negotiated values. + */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, + &phy_data); + if (ret_val) + return ret_val; + + if (phy_data & M88E1000_PSSR_DPLX) + ctrl |= E1000_CTRL_FD; + else + ctrl &= ~E1000_CTRL_FD; + + e1000_config_collision_dist(hw); + + /* Set up speed in the Device Control register depending on + * negotiated values. + */ + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) + ctrl |= E1000_CTRL_SPD_1000; + else if ((phy_data & M88E1000_PSSR_SPEED) == + M88E1000_PSSR_100MBS) + ctrl |= E1000_CTRL_SPD_100; + } /* Write the configured values back to the Device Control Reg. */ ew32(CTRL, ctrl); @@ -2401,7 +2512,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw) * speed/duplex on the MAC to the current PHY speed/duplex * settings. */ - if (hw->mac_type >= e1000_82544) + if ((hw->mac_type >= e1000_82544) && + (hw->mac_type != e1000_ce4100)) e1000_config_collision_dist(hw); else { ret_val = e1000_config_mac_to_phy(hw); @@ -2738,7 +2850,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, { u32 i; u32 mdic = 0; - const u32 phy_addr = 1; + const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; e_dbg("e1000_read_phy_reg_ex"); @@ -2752,28 +2864,61 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ - mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | - (phy_addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_READ)); + if (hw->mac_type == e1000_ce4100) { + mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (INTEL_CE_GBE_MDIC_OP_READ) | + (INTEL_CE_GBE_MDIC_GO)); - ew32(MDIC, mdic); + writel(mdic, E1000_MDIO_CMD); - /* Poll the ready bit to see if the MDI read completed */ - for (i = 0; i < 64; i++) { - udelay(50); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) - break; - } - if (!(mdic & E1000_MDIC_READY)) { - e_dbg("MDI Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (mdic & E1000_MDIC_ERROR) { - e_dbg("MDI Error\n"); - return -E1000_ERR_PHY; + /* Poll the ready bit to see if the MDI read + * completed + */ + for (i = 0; i < 64; i++) { + udelay(50); + mdic = readl(E1000_MDIO_CMD); + if (!(mdic & INTEL_CE_GBE_MDIC_GO)) + break; + } + + if (mdic & INTEL_CE_GBE_MDIC_GO) { + e_dbg("MDI Read did not complete\n"); + return -E1000_ERR_PHY; + } + + mdic = readl(E1000_MDIO_STS); + if (mdic & INTEL_CE_GBE_MDIC_READ_ERROR) { + e_dbg("MDI Read Error\n"); + return -E1000_ERR_PHY; + } + *phy_data = (u16) mdic; + } else { + mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); + + ew32(MDIC, mdic); + + /* Poll the ready bit to see if the MDI read + * completed + */ + for (i = 0; i < 64; i++) { + udelay(50); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + e_dbg("MDI Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + e_dbg("MDI Error\n"); + return -E1000_ERR_PHY; + } + *phy_data = (u16) mdic; } - *phy_data = (u16) mdic; } else { /* We must first send a preamble through the MDIO pin to signal the * beginning of an MII instruction. This is done by sending 32 @@ -2840,7 +2985,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, { u32 i; u32 mdic = 0; - const u32 phy_addr = 1; + const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; e_dbg("e1000_write_phy_reg_ex"); @@ -2850,27 +2995,54 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, } if (hw->mac_type > e1000_82543) { - /* Set up Op-code, Phy Address, register address, and data intended - * for the PHY register in the MDI Control register. The MAC will take - * care of interfacing with the PHY to send the desired data. + /* Set up Op-code, Phy Address, register address, and data + * intended for the PHY register in the MDI Control register. + * The MAC will take care of interfacing with the PHY to send + * the desired data. */ - mdic = (((u32) phy_data) | - (reg_addr << E1000_MDIC_REG_SHIFT) | - (phy_addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_WRITE)); + if (hw->mac_type == e1000_ce4100) { + mdic = (((u32) phy_data) | + (reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (INTEL_CE_GBE_MDIC_OP_WRITE) | + (INTEL_CE_GBE_MDIC_GO)); - ew32(MDIC, mdic); + writel(mdic, E1000_MDIO_CMD); - /* Poll the ready bit to see if the MDI read completed */ - for (i = 0; i < 641; i++) { - udelay(5); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) - break; - } - if (!(mdic & E1000_MDIC_READY)) { - e_dbg("MDI Write did not complete\n"); - return -E1000_ERR_PHY; + /* Poll the ready bit to see if the MDI read + * completed + */ + for (i = 0; i < 640; i++) { + udelay(5); + mdic = readl(E1000_MDIO_CMD); + if (!(mdic & INTEL_CE_GBE_MDIC_GO)) + break; + } + if (mdic & INTEL_CE_GBE_MDIC_GO) { + e_dbg("MDI Write did not complete\n"); + return -E1000_ERR_PHY; + } + } else { + mdic = (((u32) phy_data) | + (reg_addr << E1000_MDIC_REG_SHIFT) | + (phy_addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); + + ew32(MDIC, mdic); + + /* Poll the ready bit to see if the MDI read + * completed + */ + for (i = 0; i < 641; i++) { + udelay(5); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + e_dbg("MDI Write did not complete\n"); + return -E1000_ERR_PHY; + } } } else { /* We'll need to use the SW defined pins to shift the write command @@ -3048,6 +3220,11 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw) if (hw->phy_id == M88E1011_I_PHY_ID) match = true; break; + case e1000_ce4100: + if ((hw->phy_id == RTL8211B_PHY_ID) || + (hw->phy_id == RTL8201N_PHY_ID)) + match = true; + break; case e1000_82541: case e1000_82541_rev_2: case e1000_82547: @@ -3291,6 +3468,9 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) if (hw->phy_type == e1000_phy_igp) return e1000_phy_igp_get_info(hw, phy_info); + else if ((hw->phy_type == e1000_phy_8211) || + (hw->phy_type == e1000_phy_8201)) + return E1000_SUCCESS; else return e1000_phy_m88_get_info(hw, phy_info); } @@ -3742,6 +3922,12 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e_dbg("e1000_read_eeprom"); + if (hw->mac_type == e1000_ce4100) { + GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words, + data); + return E1000_SUCCESS; + } + /* If eeprom is not yet detected, do so now */ if (eeprom->word_size == 0) e1000_init_eeprom_params(hw); @@ -3904,6 +4090,12 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e_dbg("e1000_write_eeprom"); + if (hw->mac_type == e1000_ce4100) { + GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words, + data); + return E1000_SUCCESS; + } + /* If eeprom is not yet detected, do so now */ if (eeprom->word_size == 0) e1000_init_eeprom_params(hw); diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index ecd9f6c6bcd5..f5514a0d5be6 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -52,6 +52,7 @@ typedef enum { e1000_82545, e1000_82545_rev_3, e1000_82546, + e1000_ce4100, e1000_82546_rev_3, e1000_82541, e1000_82541_rev_2, @@ -209,9 +210,11 @@ typedef enum { } e1000_1000t_rx_status; typedef enum { - e1000_phy_m88 = 0, - e1000_phy_igp, - e1000_phy_undefined = 0xFF + e1000_phy_m88 = 0, + e1000_phy_igp, + e1000_phy_8211, + e1000_phy_8201, + e1000_phy_undefined = 0xFF } e1000_phy_type; typedef enum { @@ -442,6 +445,7 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value); #define E1000_DEV_ID_82547EI 0x1019 #define E1000_DEV_ID_82547EI_MOBILE 0x101A #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 +#define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -808,6 +812,16 @@ struct e1000_ffvt_entry { #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ #define E1000_FLA 0x0001C /* Flash Access - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ + +extern void __iomem *ce4100_gbe_mdio_base_virt; +#define INTEL_CE_GBE_MDIO_RCOMP_BASE (ce4100_gbe_mdio_base_virt) +#define E1000_MDIO_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0) +#define E1000_MDIO_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4) +#define E1000_MDIO_DRV (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8) +#define E1000_MDC_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0xC) +#define E1000_RCOMP_CTL (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x20) +#define E1000_RCOMP_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x24) + #define E1000_SCTL 0x00024 /* SerDes Control - RW */ #define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ @@ -820,6 +834,34 @@ struct e1000_ffvt_entry { #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ + +/* Auxiliary Control Register. This register is CE4100 specific, + * RMII/RGMII function is switched by this register - RW + * Following are bits definitions of the Auxiliary Control Register + */ +#define E1000_CTL_AUX 0x000E0 +#define E1000_CTL_AUX_END_SEL_SHIFT 10 +#define E1000_CTL_AUX_ENDIANESS_SHIFT 8 +#define E1000_CTL_AUX_RGMII_RMII_SHIFT 0 + +/* descriptor and packet transfer use CTL_AUX.ENDIANESS */ +#define E1000_CTL_AUX_DES_PKT (0x0 << E1000_CTL_AUX_END_SEL_SHIFT) +/* descriptor use CTL_AUX.ENDIANESS, packet use default */ +#define E1000_CTL_AUX_DES (0x1 << E1000_CTL_AUX_END_SEL_SHIFT) +/* descriptor use default, packet use CTL_AUX.ENDIANESS */ +#define E1000_CTL_AUX_PKT (0x2 << E1000_CTL_AUX_END_SEL_SHIFT) +/* all use CTL_AUX.ENDIANESS */ +#define E1000_CTL_AUX_ALL (0x3 << E1000_CTL_AUX_END_SEL_SHIFT) + +#define E1000_CTL_AUX_RGMII (0x0 << E1000_CTL_AUX_RGMII_RMII_SHIFT) +#define E1000_CTL_AUX_RMII (0x1 << E1000_CTL_AUX_RGMII_RMII_SHIFT) + +/* LW little endian, Byte big endian */ +#define E1000_CTL_AUX_LWLE_BBE (0x0 << E1000_CTL_AUX_ENDIANESS_SHIFT) +#define E1000_CTL_AUX_LWLE_BLE (0x1 << E1000_CTL_AUX_ENDIANESS_SHIFT) +#define E1000_CTL_AUX_LWBE_BBE (0x2 << E1000_CTL_AUX_ENDIANESS_SHIFT) +#define E1000_CTL_AUX_LWBE_BLE (0x3 << E1000_CTL_AUX_ENDIANESS_SHIFT) + #define E1000_RCTL 0x00100 /* RX Control - RW */ #define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ #define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ @@ -1011,6 +1053,7 @@ struct e1000_ffvt_entry { * in more current versions of the 8254x. Despite the difference in location, * the registers function in the same manner. */ +#define E1000_82542_CTL_AUX E1000_CTL_AUX #define E1000_82542_CTRL E1000_CTRL #define E1000_82542_CTRL_DUP E1000_CTRL_DUP #define E1000_82542_STATUS E1000_STATUS @@ -1571,6 +1614,11 @@ struct e1000_hw { #define E1000_MDIC_INT_EN 0x20000000 #define E1000_MDIC_ERROR 0x40000000 +#define INTEL_CE_GBE_MDIC_OP_WRITE 0x04000000 +#define INTEL_CE_GBE_MDIC_OP_READ 0x00000000 +#define INTEL_CE_GBE_MDIC_GO 0x80000000 +#define INTEL_CE_GBE_MDIC_READ_ERROR 0x80000000 + #define E1000_KUMCTRLSTA_MASK 0x0000FFFF #define E1000_KUMCTRLSTA_OFFSET 0x001F0000 #define E1000_KUMCTRLSTA_OFFSET_SHIFT 16 @@ -2871,6 +2919,11 @@ struct e1000_host_command_info { #define M88E1111_I_PHY_ID 0x01410CC0 #define L1LXT971A_PHY_ID 0x001378E0 +#define RTL8211B_PHY_ID 0x001CC910 +#define RTL8201N_PHY_ID 0x8200 +#define RTL_PHY_CTRL_FD 0x0100 /* Full duplex.0=half; 1=full */ +#define RTL_PHY_CTRL_SPD_100 0x200000 /* Force 100Mb */ + /* Bits... * 15-5: page * 4-0: register offset diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 340e12d2e4a9..4ff88a683f61 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -28,6 +28,12 @@ #include "e1000.h" #include +#include + +/* Intel Media SOC GbE MDIO physical base address */ +static unsigned long ce4100_gbe_mdio_base_phy; +/* Intel Media SOC GbE MDIO virtual base address */ +void __iomem *ce4100_gbe_mdio_base_virt; char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; @@ -79,6 +85,7 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { INTEL_E1000_ETHERNET_DEVICE(0x108A), INTEL_E1000_ETHERNET_DEVICE(0x1099), INTEL_E1000_ETHERNET_DEVICE(0x10B5), + INTEL_E1000_ETHERNET_DEVICE(0x2E6E), /* required last entry */ {0,} }; @@ -459,6 +466,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) case e1000_82545: case e1000_82545_rev_3: case e1000_82546: + case e1000_ce4100: case e1000_82546_rev_3: case e1000_82541: case e1000_82541_rev_2: @@ -573,6 +581,7 @@ void e1000_reset(struct e1000_adapter *adapter) case e1000_82545: case e1000_82545_rev_3: case e1000_82546: + case e1000_ce4100: case e1000_82546_rev_3: pba = E1000_PBA_48K; break; @@ -894,6 +903,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, static int global_quad_port_a = 0; /* global ksp3 port a indication */ int i, err, pci_using_dac; u16 eeprom_data = 0; + u16 tmp = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; int bars, need_ioport; @@ -996,6 +1006,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_sw_init; err = -EIO; + if (hw->mac_type == e1000_ce4100) { + ce4100_gbe_mdio_base_phy = pci_resource_start(pdev, BAR_1); + ce4100_gbe_mdio_base_virt = ioremap(ce4100_gbe_mdio_base_phy, + pci_resource_len(pdev, BAR_1)); + + if (!ce4100_gbe_mdio_base_virt) + goto err_mdio_ioremap; + } if (hw->mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | @@ -1135,6 +1153,20 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->wol = adapter->eeprom_wol; device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + /* Auto detect PHY address */ + if (hw->mac_type == e1000_ce4100) { + for (i = 0; i < 32; i++) { + hw->phy_addr = i; + e1000_read_phy_reg(hw, PHY_ID2, &tmp); + if (tmp == 0 || tmp == 0xFF) { + if (i == 31) + goto err_eeprom; + continue; + } else + break; + } + } + /* reset the hardware with the new settings */ e1000_reset(adapter); @@ -1171,6 +1203,8 @@ err_eeprom: kfree(adapter->rx_ring); err_dma: err_sw_init: +err_mdio_ioremap: + iounmap(ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: free_netdev(netdev); @@ -1409,6 +1443,7 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start, /* First rev 82545 and 82546 need to not allow any memory * write location to cross 64k boundary due to errata 23 */ if (hw->mac_type == e1000_82545 || + hw->mac_type == e1000_ce4100 || hw->mac_type == e1000_82546) { return ((begin ^ (end - 1)) >> 16) != 0 ? false : true; } diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index edd1c75aa895..55c1711f1688 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -34,12 +34,21 @@ #ifndef _E1000_OSDEP_H_ #define _E1000_OSDEP_H_ -#include -#include -#include #include -#include -#include + +#define CONFIG_RAM_BASE 0x60000 +#define GBE_CONFIG_OFFSET 0x0 + +#define GBE_CONFIG_RAM_BASE \ + ((unsigned int)(CONFIG_RAM_BASE + GBE_CONFIG_OFFSET)) + +#define GBE_CONFIG_BASE_VIRT phys_to_virt(GBE_CONFIG_RAM_BASE) + +#define GBE_CONFIG_FLASH_WRITE(base, offset, count, data) \ + (iowrite16_rep(base + offset, data, count)) + +#define GBE_CONFIG_FLASH_READ(base, offset, count, data) \ + (ioread16_rep(base + (offset << 1), data, count)) #define er32(reg) \ (readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \ -- cgit v1.2.3