From 3f505a30ea6b0fdfa4bf214b5383e8d4e6a2832e Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Fri, 9 Sep 2022 08:12:46 -0700 Subject: wifi: ath11k: Fix kernel-doc issues Fix documentation issues reported by kernel-doc: - Incorrect use of /** for non-kernel-doc comments - Mismatch between documented and actual identifiers - Incorrect identifier syntax Signed-off-by: Jeff Johnson Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220909151246.22961-1-quic_jjohnson@quicinc.com --- drivers/net/wireless/ath/ath11k/dp.h | 12 ++++-------- drivers/net/wireless/ath/ath11k/hal.h | 15 +++++++-------- drivers/net/wireless/ath/ath11k/wmi.h | 20 ++++++++++---------- 3 files changed, 21 insertions(+), 26 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath11k/dp.h b/drivers/net/wireless/ath/ath11k/dp.h index 109642a330b8..be9eafc872b3 100644 --- a/drivers/net/wireless/ath/ath11k/dp.h +++ b/drivers/net/wireless/ath/ath11k/dp.h @@ -997,8 +997,7 @@ struct htt_rx_ring_tlv_filter { #define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_NON_ZERO_MPDUS_END BIT(2) #define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_RELEASE_RING GENMASK(10, 3) -/** - * Enumeration for full monitor mode destination ring select +/* Enumeration for full monitor mode destination ring select * 0 - REO destination ring select * 1 - FW destination ring select * 2 - SW destination ring select @@ -1395,8 +1394,7 @@ struct htt_ppdu_stats_info { struct list_head list; }; -/** - * @brief target -> host packet log message +/* @brief target -> host packet log message * * @details * The following field definitions describe the format of the packet log @@ -1434,8 +1432,7 @@ struct htt_pktlog_msg { u8 payload[]; }; -/** - * @brief host -> target FW extended statistics retrieve +/* @brief host -> target FW extended statistics retrieve * * @details * The following field definitions describe the format of the HTT host @@ -1570,8 +1567,7 @@ struct htt_ext_stats_cfg_params { u32 cfg3; }; -/** - * @brief target -> host extended statistics upload +/* @brief target -> host extended statistics upload * * @details * The following field definitions describe the format of the HTT target diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h index 01817b4ee5a2..6a1f78ee6eb6 100644 --- a/drivers/net/wireless/ath/ath11k/hal.h +++ b/drivers/net/wireless/ath/ath11k/hal.h @@ -451,13 +451,13 @@ enum hal_ring_type { /** * enum hal_reo_cmd_type: Enum for REO command type - * @CMD_GET_QUEUE_STATS: Get REO queue status/stats - * @CMD_FLUSH_QUEUE: Flush all frames in REO queue - * @CMD_FLUSH_CACHE: Flush descriptor entries in the cache - * @CMD_UNBLOCK_CACHE: Unblock a descriptor's address that was blocked + * @HAL_REO_CMD_GET_QUEUE_STATS: Get REO queue status/stats + * @HAL_REO_CMD_FLUSH_QUEUE: Flush all frames in REO queue + * @HAL_REO_CMD_FLUSH_CACHE: Flush descriptor entries in the cache + * @HAL_REO_CMD_UNBLOCK_CACHE: Unblock a descriptor's address that was blocked * earlier with a 'REO_FLUSH_CACHE' command - * @CMD_FLUSH_TIMEOUT_LIST: Flush buffers/descriptors from timeout list - * @CMD_UPDATE_RX_REO_QUEUE: Update REO queue settings + * @HAL_REO_CMD_FLUSH_TIMEOUT_LIST: Flush buffers/descriptors from timeout list + * @HAL_REO_CMD_UPDATE_RX_QUEUE: Update REO queue settings */ enum hal_reo_cmd_type { HAL_REO_CMD_GET_QUEUE_STATS = 0, @@ -875,8 +875,7 @@ struct hal_reo_status { } u; }; -/** - * HAL context to be used to access SRNG APIs (currently used by data path +/* HAL context to be used to access SRNG APIs (currently used by data path * and transport (CE) modules) */ struct ath11k_hal { diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index e0eefcdb23bb..cc92f608b213 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -4820,9 +4820,9 @@ enum wmi_rate_preamble { /** * enum wmi_rtscts_prot_mode - Enable/Disable RTS/CTS and CTS2Self Protection. - * @WMI_RTS_CTS_DISABLED : RTS/CTS protection is disabled. - * @WMI_USE_RTS_CTS : RTS/CTS Enabled. - * @WMI_USE_CTS2SELF : CTS to self protection Enabled. + * @WMI_RTS_CTS_DISABLED: RTS/CTS protection is disabled. + * @WMI_USE_RTS_CTS: RTS/CTS Enabled. + * @WMI_USE_CTS2SELF: CTS to self protection Enabled. */ enum wmi_rtscts_prot_mode { WMI_RTS_CTS_DISABLED = 0, @@ -4833,13 +4833,13 @@ enum wmi_rtscts_prot_mode { /** * enum wmi_rtscts_profile - Selection of RTS CTS profile along with enabling * protection mode. - * @WMI_RTSCTS_FOR_NO_RATESERIES - Neither of rate-series should use RTS-CTS - * @WMI_RTSCTS_FOR_SECOND_RATESERIES - Only second rate-series will use RTS-CTS - * @WMI_RTSCTS_ACROSS_SW_RETRIES - Only the second rate-series will use RTS-CTS, - * but if there's a sw retry, both the rate - * series will use RTS-CTS. - * @WMI_RTSCTS_ERP - RTS/CTS used for ERP protection for every PPDU. - * @WMI_RTSCTS_FOR_ALL_RATESERIES - Enable RTS-CTS for all rate series. + * @WMI_RTSCTS_FOR_NO_RATESERIES: Neither of rate-series should use RTS-CTS + * @WMI_RTSCTS_FOR_SECOND_RATESERIES: Only second rate-series will use RTS-CTS + * @WMI_RTSCTS_ACROSS_SW_RETRIES: Only the second rate-series will use RTS-CTS, + * but if there's a sw retry, both the rate + * series will use RTS-CTS. + * @WMI_RTSCTS_ERP: RTS/CTS used for ERP protection for every PPDU. + * @WMI_RTSCTS_FOR_ALL_RATESERIES: Enable RTS-CTS for all rate series. */ enum wmi_rtscts_profile { WMI_RTSCTS_FOR_NO_RATESERIES = 0, -- cgit v1.2.3