From 3a245cbef6a9e4398456bd733b0b4b7cb3f11994 Mon Sep 17 00:00:00 2001 From: Thomas Huehn Date: Wed, 15 Aug 2012 22:48:35 +0200 Subject: ath5k: fix wrong max power per rate eeprom reads for 802.11a This patch reduces the per rate target power eeprom reads for AR5K_EEPROM_MODE_11A from 10 to 8, as there are only 8 valid power curve entries on the eeprom. The former 10 reads lead to equal max power limits per rate and this causes an increasing distortion for all rates above 24 MBit and leads to a needless poor performance in 802.11a mode. Signed-off-by: Thomas Huehn Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 2 +- drivers/net/wireless/ath/ath5k/eeprom.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 4026c906cc7b..b7e0258887e7 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) case AR5K_EEPROM_MODE_11A: offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; break; case AR5K_EEPROM_MODE_11B: offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index dc2bcfeadeb4..94a9bbea6874 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 -- cgit v1.2.3 From 7b4e6cfbae304177b8edc0c12341b4896cab3f2d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 11:49:58 +0200 Subject: drivers/net/wireless/ipw2x00/ipw2100.c: introduce missing initialization The result of one call to a function is tested, and then at the second call to the same function, the previous result, and not the current result, is tested again. Also changed &bssid to bssid, at the suggestion of Stanislav Yakovlev. The semantic match that finds the first problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression ret; identifier f; statement S1,S2; @@ *ret = f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S1 ... when any *f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S2 // Signed-off-by: Julia Lawall Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 95aa8e1683ec..83324b321652 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) return; } len = ETH_ALEN; - ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len); + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid, + &len); if (ret) { IPW_DEBUG_INFO("failed querying ordinals at line %d\n", __LINE__); -- cgit v1.2.3 From 94543a8d4fb302817014981489f15cb3b92ec3c2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Aug 2012 18:57:10 +0200 Subject: iwlwifi: fix flow handler debug code iwl_dbgfs_fh_reg_read() can cause crashes and/or BUG_ON in slub because the ifdefs are wrong, the code in iwl_dump_fh() should use DEBUGFS, not DEBUG to protect the buffer writing code. Also, while at it, clean up the arguments to the function, some code and make it generally safer. Cc: stable@vger.kernel.org Reported-by: Benjamin Herrenschmidt Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/pcie/internal.h | 2 +- drivers/net/wireless/iwlwifi/pcie/rx.c | 2 +- drivers/net/wireless/iwlwifi/pcie/trans.c | 30 +++++++++++++++------------- 3 files changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index d9694c58208c..4ffc18dc3a57 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q); /***************************************************** * Error handling ******************************************************/ -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display); +int iwl_dump_fh(struct iwl_trans *trans, char **buf); void iwl_dump_csr(struct iwl_trans *trans); /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 39a6ca1f009c..d1a61ba6247a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans) } iwl_dump_csr(trans); - iwl_dump_fh(trans, NULL, false); + iwl_dump_fh(trans, NULL); iwl_op_mode_nic_error(trans->op_mode); } diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 939c2f78df58..1e86ea2266d4 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1649,13 +1649,9 @@ static const char *get_fh_string(int cmd) #undef IWL_CMD } -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) +int iwl_dump_fh(struct iwl_trans *trans, char **buf) { int i; -#ifdef CONFIG_IWLWIFI_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif static const u32 fh_tbl[] = { FH_RSCSR_CHNL0_STTS_WPTR_REG, FH_RSCSR_CHNL0_RBDCB_BASE_REG, @@ -1667,29 +1663,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) FH_TSSR_TX_STATUS_REG, FH_TSSR_TX_ERROR_REG }; -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + if (buf) { + int pos = 0; + size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + *buf = kmalloc(bufsz, GFP_KERNEL); if (!*buf) return -ENOMEM; + pos += scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) pos += scnprintf(*buf + pos, bufsz - pos, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return pos; } #endif + IWL_ERR(trans, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) IWL_ERR(trans, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return 0; } @@ -1982,11 +1984,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file, size_t count, loff_t *ppos) { struct iwl_trans *trans = file->private_data; - char *buf; + char *buf = NULL; int pos = 0; ssize_t ret = -EFAULT; - ret = pos = iwl_dump_fh(trans, &buf, true); + ret = pos = iwl_dump_fh(trans, &buf); if (buf) { ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); -- cgit v1.2.3 From 4fc79db178f0a0ede479b4713e00df2d106028b3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Aug 2012 18:57:11 +0200 Subject: iwlwifi: protect SRAM debugfs If the device is not started, we can't read its SRAM and attempting to do so will cause issues. Protect the debugfs read. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/dvm/debugfs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c index 46782f1102ac..a47b306b522c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, const struct fw_img *img; size_t bufsz; + if (!iwl_is_ready_rf(priv)) + return -EAGAIN; + /* default is to dump the entire data segment */ if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) { priv->dbgfs_sram_offset = 0x800000; -- cgit v1.2.3 From ea2d218308e5710c70d76eb3c2876988c88119cc Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Sun, 5 Aug 2012 00:29:07 +0300 Subject: brcm80211: smac: set interface down on reset This change marks interface as down on reset, otherwise the driver can't reinitialize itself properly. Without the change a transient problem turns out to be critical and leads to inavailability to reset the driver without brcmsmac module unload/load cycle: ieee80211 phy0: wl0: PSM microcode watchdog fired at 5993 (seconds). Resetting. brcms_c_dpc : PSM Watchdog, chipid 0xa8d9, chiprev 0x1 ieee80211 phy0: wl0: fatal error, reinitializing ieee80211 phy0: Hardware restart was requested ieee80211 phy0: brcms_ops_start: brcms_up() returned -19 Signed-off-by: Vladimir Zapolskiy Cc: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 192ad5c1fcc8..a5edebeb0b4f 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1233,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl) /* dpc will not be rescheduled */ wl->resched = false; + /* inform publicly that interface is down */ + wl->pub->up = false; + return 0; } -- cgit v1.2.3 From 5f42f7bc9638a0bc69dcb8b8b6da542b72113fc2 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 22 Aug 2012 00:26:15 +0000 Subject: stmmac: fix GMAC syn ID Erroneously the DWMAC_CORE_3_40 was set to 34 instead of 0x34. This can generate problems when run on old chips because the driver assumes that there are the extra 16 regs available for perfect filtering. Signed-off-by: Giuseppe Cavallaro Cc: Gianni Antoniazzi Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index f90fcb5f9573..b4c44a587f02 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -229,6 +229,6 @@ enum rtc_control { #define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 /* Synopsys Core versions */ -#define DWMAC_CORE_3_40 34 +#define DWMAC_CORE_3_40 0x34 extern const struct stmmac_dma_ops dwmac1000_dma_ops; -- cgit v1.2.3 From a6b9650108003e994770209fb8efedf6e214dcf7 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 22 Aug 2012 00:26:16 +0000 Subject: stmmac: fix a typo in the macro used to mask the mmc irq This patch fixes the name of the macro used to mask the mmc interrupt: erroneously it was used: MMC_DEFAUL_MASK. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index c07cfe989f6e..0c74a702d461 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -33,7 +33,7 @@ #define MMC_TX_INTR 0x00000108 /* MMC TX Interrupt */ #define MMC_RX_INTR_MASK 0x0000010c /* MMC Interrupt Mask */ #define MMC_TX_INTR_MASK 0x00000110 /* MMC Interrupt Mask */ -#define MMC_DEFAUL_MASK 0xffffffff +#define MMC_DEFAULT_MASK 0xffffffff /* MMC TX counter registers */ @@ -147,8 +147,8 @@ void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode) /* To mask all all interrupts.*/ void dwmac_mmc_intr_all_mask(void __iomem *ioaddr) { - writel(MMC_DEFAUL_MASK, ioaddr + MMC_RX_INTR_MASK); - writel(MMC_DEFAUL_MASK, ioaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_TX_INTR_MASK); } /* This reads the MAC core counters (if actaully supported). -- cgit v1.2.3 From ac70b2e9a13423b5efa0178e081936ce6979aea5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 15 Aug 2012 18:09:15 +0100 Subject: sfc: Fix reporting of IPv4 full filters through ethtool ETHTOOL_GRXCLSRULE returns filters for a TCP/IPv4 or UDP/IPv4 4-tuple with source and destination swapped. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c index 8cba2df82b18..5faedd855b77 100644 --- a/drivers/net/ethernet/sfc/ethtool.c +++ b/drivers/net/ethernet/sfc/ethtool.c @@ -863,8 +863,8 @@ static int efx_ethtool_get_class_rule(struct efx_nic *efx, &ip_entry->ip4dst, &ip_entry->pdst); if (rc != 0) { rc = efx_filter_get_ipv4_full( - &spec, &proto, &ip_entry->ip4src, &ip_entry->psrc, - &ip_entry->ip4dst, &ip_entry->pdst); + &spec, &proto, &ip_entry->ip4dst, &ip_entry->pdst, + &ip_entry->ip4src, &ip_entry->psrc); EFX_WARN_ON_PARANOID(rc); ip_mask->ip4src = ~0; ip_mask->psrc = ~0; -- cgit v1.2.3 From ef813c412c0cf254ddce7d922289e2d6a69960f0 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 8 Aug 2012 19:15:01 +0400 Subject: can: softing: Fix potential memory leak in softing_load_fw() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Marc Kleine-Budde --- drivers/net/can/softing/softing_fw.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c index 310596175676..b595d3422b9f 100644 --- a/drivers/net/can/softing/softing_fw.c +++ b/drivers/net/can/softing/softing_fw.c @@ -150,7 +150,7 @@ int softing_load_fw(const char *file, struct softing *card, const uint8_t *mem, *end, *dat; uint16_t type, len; uint32_t addr; - uint8_t *buf = NULL; + uint8_t *buf = NULL, *new_buf; int buflen = 0; int8_t type_end = 0; @@ -199,11 +199,12 @@ int softing_load_fw(const char *file, struct softing *card, if (len > buflen) { /* align buflen */ buflen = (len + (1024-1)) & ~(1024-1); - buf = krealloc(buf, buflen, GFP_KERNEL); - if (!buf) { + new_buf = krealloc(buf, buflen, GFP_KERNEL); + if (!new_buf) { ret = -ENOMEM; goto failed; } + buf = new_buf; } /* verify record data */ memcpy_fromio(buf, &dpram[addr + offset], len); -- cgit v1.2.3 From da3d50ef308d53f216f1f92f4971f245c13e9f65 Mon Sep 17 00:00:00 2001 From: Sven Schmitt Date: Thu, 9 Aug 2012 14:46:34 +0200 Subject: can: sja1000_platform: fix wrong flag IRQF_SHARED for interrupt sharing The sja1000 platform driver wrongly assumes that a shared IRQ is indicated with the IRQF_SHARED flag in irq resource flags. This patch changes the driver to handle the correct flag IORESOURCE_IRQ_SHAREABLE instead. There are no mainline users of the platform driver which wrongly make use of IRQF_SHARED. Signed-off-by: Sven Schmitt Acked-by: Yegor Yefremov Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/sja1000_platform.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c index 4f50145f6483..662c5f7eb0c5 100644 --- a/drivers/net/can/sja1000/sja1000_platform.c +++ b/drivers/net/can/sja1000/sja1000_platform.c @@ -109,7 +109,9 @@ static int sp_probe(struct platform_device *pdev) priv = netdev_priv(dev); dev->irq = res_irq->start; - priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED); + priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + priv->irq_flags |= IRQF_SHARED; priv->reg_base = addr; /* The CAN clock frequency is half the oscillator clock frequency */ priv->can.clock.freq = pdata->osc_freq / 2; -- cgit v1.2.3 From bd4242dfe85470b9caecbd049310518f9b9e3f14 Mon Sep 17 00:00:00 2001 From: Rayagond Kokatanur Date: Wed, 22 Aug 2012 21:28:18 +0000 Subject: stmmac: add header inclusion protection This patch adds "#ifndef __
_H" for protecting header from double inclusion. Signed-off-by: Rayagond Kokatanur Hacked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/descs.h | 6 ++++++ drivers/net/ethernet/stmicro/stmmac/descs_com.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/dwmac100.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 3 +++ drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/mmc.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/stmmac.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h | 4 ++++ 9 files changed, 43 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index e2d083228f3a..719be3912aa9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __COMMON_H__ +#define __COMMON_H__ + #include #include #include @@ -366,3 +369,5 @@ extern void stmmac_set_mac(void __iomem *ioaddr, bool enable); extern void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr); extern const struct stmmac_ring_mode_ops ring_mode_ops; + +#endif /* __COMMON_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h index 9820ec842cc0..223adf95fd03 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs.h @@ -20,6 +20,10 @@ Author: Giuseppe Cavallaro *******************************************************************************/ + +#ifndef __DESCS_H__ +#define __DESCS_H__ + struct dma_desc { /* Receive descriptor */ union { @@ -166,3 +170,5 @@ enum tdes_csum_insertion { * is not calculated */ cic_full = 3, /* IP header and pseudoheader */ }; + +#endif /* __DESCS_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index dd8d6e19dff6..7ee9499a6e38 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -27,6 +27,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DESC_COM_H__ +#define __DESC_COM_H__ + #if defined(CONFIG_STMMAC_RING) static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end) { @@ -124,3 +127,5 @@ static inline void norm_set_tx_desc_len(struct dma_desc *p, int len) p->des01.tx.buffer1_size = len; } #endif + +#endif /* __DESC_COM_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h index 7c6d857a9cc7..2ec6aeae349e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC100_H__ +#define __DWMAC100_H__ + #include #include "common.h" @@ -119,3 +122,5 @@ enum ttc_control { #define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ extern const struct stmmac_dma_ops dwmac100_dma_ops; + +#endif /* __DWMAC100_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index b4c44a587f02..0e4cacedc1f0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -19,6 +19,8 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC1000_H__ +#define __DWMAC1000_H__ #include #include "common.h" @@ -232,3 +234,4 @@ enum rtc_control { #define DWMAC_CORE_3_40 0x34 extern const struct stmmac_dma_ops dwmac1000_dma_ops; +#endif /* __DWMAC1000_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h index e678ce39d014..e49c9a0fd6ff 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC_DMA_H__ +#define __DWMAC_DMA_H__ + /* DMA CRS Control and Status Register Mapping */ #define DMA_BUS_MODE 0x00001000 /* Bus Mode */ #define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ @@ -109,3 +112,5 @@ extern void dwmac_dma_start_rx(void __iomem *ioaddr); extern void dwmac_dma_stop_rx(void __iomem *ioaddr); extern int dwmac_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x); + +#endif /* __DWMAC_DMA_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc.h b/drivers/net/ethernet/stmicro/stmmac/mmc.h index a38352024cb8..67995ef25251 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc.h +++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __MMC_H__ +#define __MMC_H__ + /* MMC control register */ /* When set, all counter are reset */ #define MMC_CNTRL_COUNTER_RESET 0x1 @@ -129,3 +132,5 @@ struct stmmac_counters { extern void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode); extern void dwmac_mmc_intr_all_mask(void __iomem *ioaddr); extern void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc); + +#endif /* __MMC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index f2d3665430ad..e872e1da3137 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -20,6 +20,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __STMMAC_H__ +#define __STMMAC_H__ + #define STMMAC_RESOURCE_NAME "stmmaceth" #define DRV_MODULE_VERSION "March_2012" @@ -166,3 +169,5 @@ static inline void stmmac_unregister_pci(void) { } #endif /* CONFIG_STMMAC_PCI */ + +#endif /* __STMMAC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h index 6863590d184b..aea9b14cdfbe 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h @@ -21,6 +21,8 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __STMMAC_TIMER_H__ +#define __STMMAC_TIMER_H__ struct stmmac_timer { void (*timer_start) (unsigned int new_freq); @@ -40,3 +42,5 @@ void stmmac_schedule(struct net_device *dev); extern int tmu2_register_user(void *fnt, void *data); extern void tmu2_unregister_user(void); #endif + +#endif /* __STMMAC_TIMER_H__ */ -- cgit v1.2.3 From 072a9c48600409d72aeb0d5b29fbb75861a06631 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 24 Aug 2012 21:41:11 +0000 Subject: netpoll: revert 6bdb7fe3104 and fix be_poll() instead Against -net. In the patch "netpoll: re-enable irq in poll_napi()", I tried to fix the following warning: [100718.051041] ------------[ cut here ]------------ [100718.051048] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x7d/0xb0() (Not tainted) [100718.051049] Hardware name: ProLiant BL460c G7 ... [100718.051068] Call Trace: [100718.051073] [] ? warn_slowpath_common+0x87/0xc0 [100718.051075] [] ? warn_slowpath_null+0x1a/0x20 [100718.051077] [] ? local_bh_enable_ip+0x7d/0xb0 [100718.051080] [] ? _spin_unlock_bh+0x1b/0x20 [100718.051085] [] ? be_process_mcc+0x74/0x230 [be2net] [100718.051088] [] ? be_poll_tx_mcc+0x16c/0x290 [be2net] [100718.051090] [] ? netpoll_poll_dev+0xd6/0x490 [100718.051095] [] ? bond_poll_controller+0x75/0x80 [bonding] [100718.051097] [] ? netpoll_poll_dev+0x45/0x490 [100718.051100] [] ? ksize+0x19/0x80 [100718.051102] [] ? netpoll_send_skb_on_dev+0x157/0x240 by reenabling IRQ before calling ->poll, but it seems more problems are introduced after that patch: http://ozlabs.org/~akpm/stuff/IMG_20120824_122054.jpg http://marc.info/?l=linux-netdev&m=134563282530588&w=2 So it is safe to fix be2net driver code directly. This patch reverts the offending commit and fixes be_poll() by avoid disabling BH there, this is okay because be_poll() can be called either by poll_napi() which already disables IRQ, or by net_rx_action() which already disables BH. Reported-by: Andrew Morton Reported-by: Sylvain Munaut Cc: Sylvain Munaut Cc: Andrew Morton Cc: David Miller Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Cong Wang Tested-by: Sylvain Munaut Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 6 ++++-- drivers/net/ethernet/emulex/benet/be_main.c | 2 ++ net/core/netpoll.c | 10 +--------- 3 files changed, 7 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 7fac97b4bb59..8c63d06ab12b 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -259,7 +259,7 @@ int be_process_mcc(struct be_adapter *adapter) int num = 0, status = 0; struct be_mcc_obj *mcc_obj = &adapter->mcc_obj; - spin_lock_bh(&adapter->mcc_cq_lock); + spin_lock(&adapter->mcc_cq_lock); while ((compl = be_mcc_compl_get(adapter))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { /* Interpret flags as an async trailer */ @@ -280,7 +280,7 @@ int be_process_mcc(struct be_adapter *adapter) if (num) be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num); - spin_unlock_bh(&adapter->mcc_cq_lock); + spin_unlock(&adapter->mcc_cq_lock); return status; } @@ -295,7 +295,9 @@ static int be_mcc_wait_compl(struct be_adapter *adapter) if (be_error(adapter)) return -EIO; + local_bh_disable(); status = be_process_mcc(adapter); + local_bh_enable(); if (atomic_read(&mcc_obj->q.used) == 0) break; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 90a903d83d87..78b8aa8069f0 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3763,7 +3763,9 @@ static void be_worker(struct work_struct *work) /* when interrupts are not yet enabled, just reap any pending * mcc completions */ if (!netif_running(adapter->netdev)) { + local_bh_disable(); be_process_mcc(adapter); + local_bh_enable(); goto reschedule; } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 346b1eb83a1f..e4ba3e70c174 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -168,24 +168,16 @@ static void poll_napi(struct net_device *dev) struct napi_struct *napi; int budget = 16; - WARN_ON_ONCE(!irqs_disabled()); - list_for_each_entry(napi, &dev->napi_list, dev_list) { - local_irq_enable(); if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { - rcu_read_lock_bh(); budget = poll_one_napi(rcu_dereference_bh(dev->npinfo), napi, budget); - rcu_read_unlock_bh(); spin_unlock(&napi->poll_lock); - if (!budget) { - local_irq_disable(); + if (!budget) break; - } } - local_irq_disable(); } } -- cgit v1.2.3 From 3683243b2c551e58082b179fd153c7d43ddc503b Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 22 Aug 2012 00:26:47 +0000 Subject: xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX I'm slightly concerned by the "only in exceptional circumstances" comment on __pskb_pull_tail but the structure of an skb just created by netfront shouldn't hit any of the especially slow cases. This approach still does slightly more work than the old way, since if we pull up the entire first frag we now have to shuffle everything down where before we just received into the right place in the first place. Signed-off-by: Ian Campbell Cc: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge Cc: Mel Gorman Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Konrad Rzeszutek Wilk Acked-by: Konrad Rzeszutek Wilk Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 39 ++++++++++----------------------------- 1 file changed, 10 insertions(+), 29 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 30899901aef5..650f79a1f2bd 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -57,8 +57,7 @@ static const struct ethtool_ops xennet_ethtool_ops; struct netfront_cb { - struct page *page; - unsigned offset; + int pull_to; }; #define NETFRONT_SKB_CB(skb) ((struct netfront_cb *)((skb)->cb)) @@ -867,15 +866,9 @@ static int handle_incoming_queue(struct net_device *dev, struct sk_buff *skb; while ((skb = __skb_dequeue(rxq)) != NULL) { - struct page *page = NETFRONT_SKB_CB(skb)->page; - void *vaddr = page_address(page); - unsigned offset = NETFRONT_SKB_CB(skb)->offset; - - memcpy(skb->data, vaddr + offset, - skb_headlen(skb)); + int pull_to = NETFRONT_SKB_CB(skb)->pull_to; - if (page != skb_frag_page(&skb_shinfo(skb)->frags[0])) - __free_page(page); + __pskb_pull_tail(skb, pull_to - skb_headlen(skb)); /* Ethernet work: Delayed to here as it peeks the header. */ skb->protocol = eth_type_trans(skb, dev); @@ -913,7 +906,6 @@ static int xennet_poll(struct napi_struct *napi, int budget) struct sk_buff_head errq; struct sk_buff_head tmpq; unsigned long flags; - unsigned int len; int err; spin_lock(&np->rx_lock); @@ -955,24 +947,13 @@ err: } } - NETFRONT_SKB_CB(skb)->page = - skb_frag_page(&skb_shinfo(skb)->frags[0]); - NETFRONT_SKB_CB(skb)->offset = rx->offset; - - len = rx->status; - if (len > RX_COPY_THRESHOLD) - len = RX_COPY_THRESHOLD; - skb_put(skb, len); + NETFRONT_SKB_CB(skb)->pull_to = rx->status; + if (NETFRONT_SKB_CB(skb)->pull_to > RX_COPY_THRESHOLD) + NETFRONT_SKB_CB(skb)->pull_to = RX_COPY_THRESHOLD; - if (rx->status > len) { - skb_shinfo(skb)->frags[0].page_offset = - rx->offset + len; - skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status - len); - skb->data_len = rx->status - len; - } else { - __skb_fill_page_desc(skb, 0, NULL, 0, 0); - skb_shinfo(skb)->nr_frags = 0; - } + skb_shinfo(skb)->frags[0].page_offset = rx->offset; + skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status); + skb->data_len = rx->status; i = xennet_fill_frags(np, skb, &tmpq); @@ -999,7 +980,7 @@ err: * receive throughout using the standard receive * buffer size was cut by 25%(!!!). */ - skb->truesize += skb->data_len - (RX_COPY_THRESHOLD - len); + skb->truesize += skb->data_len - RX_COPY_THRESHOLD; skb->len += skb->data_len; if (rx->flags & XEN_NETRXF_csum_blank) -- cgit v1.2.3 From e2c53be223aca36cf93eb6a0f6bafa079e78f52b Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 23 Aug 2012 21:46:25 +0000 Subject: gianfar: fix default tx vlan offload feature flag Commit - "b852b72 gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e" disables by default (on mac init) the hw vlan tag insertion. The "features" flags were not updated to reflect this, and "ethtool -K" shows tx-vlan-offload to be "on" by default. Cc: Sebastian Poehn Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 4605f7246687..d3233f59a82e 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev) if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->features |= NETIF_F_HW_VLAN_RX; } if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { -- cgit v1.2.3 From d821a4c4d11ad160925dab2bb009b8444beff484 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 24 Aug 2012 20:38:11 +0000 Subject: e1000e: DoS while TSO enabled caused by link partner with small MSS With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by: Ben Hutchings Signed-off-by: Bruce Allan Cc: Stable [2.6.24+] Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/e1000.h | 1 + drivers/net/ethernet/intel/e1000e/netdev.c | 48 ++++++++++++++---------------- 2 files changed, 24 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index cd153326c3cf..cb3356c9af80 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -310,6 +310,7 @@ struct e1000_adapter { */ struct e1000_ring *tx_ring /* One per active queue */ ____cacheline_aligned_in_smp; + u32 tx_fifo_limit; struct napi_struct napi; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 46c3b1f9ff89..d01a099475a1 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3516,6 +3516,15 @@ void e1000e_reset(struct e1000_adapter *adapter) break; } + /* + * Alignment of Tx data is on an arbitrary byte boundary with the + * maximum size per Tx descriptor limited only to the transmit + * allocation of the packet buffer minus 96 bytes with an upper + * limit of 24KB due to receive synchronization limitations. + */ + adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, + 24 << 10); + /* * Disable Adaptive Interrupt Moderation if 2 full packets cannot * fit in receive buffer. @@ -4785,12 +4794,9 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) return 1; } -#define E1000_MAX_PER_TXD 8192 -#define E1000_MAX_TXD_PWR 12 - static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, unsigned int first, unsigned int max_per_txd, - unsigned int nr_frags, unsigned int mss) + unsigned int nr_frags) { struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; @@ -5023,20 +5029,19 @@ static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { + BUG_ON(size > tx_ring->count); + if (e1000_desc_unused(tx_ring) >= size) return 0; return __e1000_maybe_stop_tx(tx_ring, size); } -#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1) static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int first; - unsigned int max_per_txd = E1000_MAX_PER_TXD; - unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; unsigned int len = skb_headlen(skb); unsigned int nr_frags; @@ -5056,18 +5061,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, } mss = skb_shinfo(skb)->gso_size; - /* - * The controller does a simple calculation to - * make sure there is enough room in the FIFO before - * initiating the DMA for each buffer. The calc is: - * 4 = ceil(buffer len/mss). To make sure we don't - * overrun the FIFO, adjust the max buffer len if mss - * drops. - */ if (mss) { u8 hdr_len; - max_per_txd = min(mss << 2, max_per_txd); - max_txd_pwr = fls(max_per_txd) - 1; /* * TSO Workaround for 82571/2/3 Controllers -- if skb->data @@ -5097,12 +5092,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count++; count++; - count += TXD_USE_COUNT(len, max_txd_pwr); + count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); nr_frags = skb_shinfo(skb)->nr_frags; for (f = 0; f < nr_frags; f++) - count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]), - max_txd_pwr); + count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]), + adapter->tx_fifo_limit); if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); @@ -5144,15 +5139,18 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, tx_flags |= E1000_TX_FLAGS_NO_FCS; /* if count is 0 then mapping error has occurred */ - count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss); + count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, + nr_frags); if (count) { skb_tx_timestamp(skb); netdev_sent_queue(netdev, skb->len); e1000_tx_queue(tx_ring, tx_flags, count); /* Make sure there is space in the ring for the next send. */ - e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2); - + e1000_maybe_stop_tx(tx_ring, + (MAX_SKB_FRAGS * + DIV_ROUND_UP(PAGE_SIZE, + adapter->tx_fifo_limit) + 2)); } else { dev_kfree_skb_any(skb); tx_ring->buffer_info[first].time_stamp = 0; @@ -6327,8 +6325,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.phy.autoneg_advertised = 0x2f; /* ring size defaults */ - adapter->rx_ring->count = 256; - adapter->tx_ring->count = 256; + adapter->rx_ring->count = E1000_DEFAULT_RXD; + adapter->tx_ring->count = E1000_DEFAULT_TXD; /* * Initial Wake on LAN setting - If APM wake is enabled in -- cgit v1.2.3 From 26614ba5445fe31a69068a5e94266fa08b4ee345 Mon Sep 17 00:00:00 2001 From: Merav Sicron Date: Mon, 27 Aug 2012 03:26:19 +0000 Subject: bnx2x: Move netif_napi_add to the open call Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: Merav Sicron Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 3 --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 2 -- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 ++++------ 5 files changed, 10 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 463b9ec57d80..6d1a24acb77e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1708,9 +1708,6 @@ struct bnx2x_func_init_params { continue; \ else -#define for_each_napi_rx_queue(bp, var) \ - for ((var) = 0; (var) < bp->num_napi_queues; (var)++) - /* Skip OOO FP */ #define for_each_tx_queue(bp, var) \ for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e879e19eb0d6..af20c6ee2cd9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2046,6 +2046,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) */ bnx2x_setup_tc(bp->dev, bp->max_cos); + /* Add all NAPI objects */ + bnx2x_add_all_napi(bp); bnx2x_napi_enable(bp); /* set pf load just before approaching the MCP */ @@ -2408,6 +2410,8 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index dfa757e74296..21b553229ea4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -792,7 +792,7 @@ static inline void bnx2x_add_all_napi(struct bnx2x *bp) bp->num_napi_queues = bp->num_queues; /* Add NAPI objects */ - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), bnx2x_poll, BNX2X_NAPI_WEIGHT); } @@ -801,7 +801,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp) { int i; - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_del(&bnx2x_fp(bp, i, napi)); } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index fc4e0e3885b0..c37a68d68090 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -2888,11 +2888,9 @@ static void bnx2x_get_channels(struct net_device *dev, */ static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss) { - bnx2x_del_all_napi(bp); bnx2x_disable_msi(bp); BNX2X_NUM_QUEUES(bp) = num_rss + NON_ETH_CONTEXT_USE; bnx2x_set_int_mode(bp); - bnx2x_add_all_napi(bp); } /** diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 02b5a343b195..5b42275ed033 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8427,6 +8427,8 @@ unload_error: /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); @@ -11899,9 +11901,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, */ bnx2x_set_int_mode(bp); - /* Add all NAPI objects */ - bnx2x_add_all_napi(bp); - rc = register_netdev(dev); if (rc) { dev_err(&pdev->dev, "Cannot register net device\n"); @@ -11976,9 +11975,6 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) unregister_netdev(dev); - /* Delete all NAPI objects */ - bnx2x_del_all_napi(bp); - /* Power on: we can't let PCI layer write to us while we are in D3 */ bnx2x_set_power_state(bp, PCI_D0); @@ -12025,6 +12021,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) bnx2x_tx_disable(bp); bnx2x_netif_stop(bp, 0); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); del_timer_sync(&bp->timer); -- cgit v1.2.3 From 14a15d618743ebc4936fe03073bf0c75024d3a07 Mon Sep 17 00:00:00 2001 From: Merav Sicron Date: Mon, 27 Aug 2012 03:26:20 +0000 Subject: bnx2x: Correct the ndo_poll_controller call This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: Merav Sicron Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5b42275ed033..21054987257a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11231,10 +11231,12 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static void poll_bnx2x(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2x_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + napi_schedule(&bnx2x_fp(bp, fp->index, napi)); + } } #endif -- cgit v1.2.3 From b72c200975a4ed579dbf3353019e19528745a29a Mon Sep 17 00:00:00 2001 From: Jaccon Bastiaansen Date: Mon, 27 Aug 2012 11:53:51 +0000 Subject: cs89x0 : packet reception not working The RxCFG register of the CS89x0 could be configured incorrectly (because of misplaced parentheses), resulting in the disabling of packet reception. Signed-off-by: Jaccon Bastiaansen Signed-off-by: David S. Miller --- drivers/net/ethernet/cirrus/cs89x0.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 845b2020f291..138446957786 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1243,6 +1243,7 @@ static void set_multicast_list(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); unsigned long flags; + u16 cfg; spin_lock_irqsave(&lp->lock, flags); if (dev->flags & IFF_PROMISC) @@ -1260,11 +1261,10 @@ static void set_multicast_list(struct net_device *dev) /* in promiscuous mode, we accept errored packets, * so we have to enable interrupts on them also */ - writereg(dev, PP_RxCFG, - (lp->curr_rx_cfg | - (lp->rx_mode == RX_ALL_ACCEPT) - ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL) - : 0)); + cfg = lp->curr_rx_cfg; + if (lp->rx_mode == RX_ALL_ACCEPT) + cfg |= RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL; + writereg(dev, PP_RxCFG, cfg); spin_unlock_irqrestore(&lp->lock, flags); } -- cgit v1.2.3 From ab6f148de28261682d300662e87b9477f7efc95b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sun, 26 Aug 2012 20:41:38 +0000 Subject: usbnet: fix deadlock in resume A usbnet device can share a multifunction device with a storage device. If the storage device is autoresumed the usbnet devices also needs to be autoresumed. Allocating memory with GFP_KERNEL can deadlock in this case. This should go back into all kernels that have commit 65841fd5132c3941cdf5df09e70df3ed28323212 That is 3.5 Signed-off-by: Oliver Neukum CC: stable@kernel.org Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 8531c1caac28..fd4b26d46fd5 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1573,7 +1573,7 @@ int usbnet_resume (struct usb_interface *intf) netif_device_present(dev->net) && !timer_pending(&dev->delay) && !test_bit(EVENT_RX_HALT, &dev->flags)) - rx_alloc_submit(dev, GFP_KERNEL); + rx_alloc_submit(dev, GFP_NOIO); if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); -- cgit v1.2.3 From fa026e223df2514b271b20f839ab05d7f21181b9 Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Tue, 28 Aug 2012 02:30:32 +0000 Subject: net: qmi_wwan: new device: Foxconn/Novatel E396 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Foxconn-branded Novatel E396, Gobi3k modem. Cc: Dan Williams Cc: Bjørn Mork Cc: Ben Chan Signed-off-by: Aleksander Morgado Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 328397c66730..189e52d2eee6 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -441,6 +441,7 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ { } /* END */ }; -- cgit v1.2.3 From b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Thu, 30 Aug 2012 06:37:32 +0000 Subject: net: ethernet: fix kernel OOPS when remove davinci_mdio module davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: Bin Liu Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_mdio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index cd7ee204e94a..a9ca4a03d31b 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -394,8 +394,10 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct davinci_mdio_data *data = dev_get_drvdata(dev); - if (data->bus) + if (data->bus) { + mdiobus_unregister(data->bus); mdiobus_free(data->bus); + } if (data->clk) clk_put(data->clk); -- cgit v1.2.3 From e1b2aa7f3051e268973b6126fdca602ac4af6bc4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 1 Sep 2012 09:57:40 +0000 Subject: fddi: 64 bit bug in smt_add_para() The intent was to set 4 bytes of data so that's why the sp_len is set to 4 on the next line. The cast to u_long pointer clears 8 bytes on 64 bit arches. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/fddi/skfp/pmf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/fddi/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c index 24d8566cfd8b..441b4dc79450 100644 --- a/drivers/net/fddi/skfp/pmf.c +++ b/drivers/net/fddi/skfp/pmf.c @@ -673,7 +673,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para, sm_pm_get_ls(smc,port_to_mib(smc,port))) ; break ; case SMT_P_REASON : - * (u_long *) to = 0 ; + *(u32 *)to = 0 ; sp_len = 4 ; goto sp_done ; case SMT_P1033 : /* time stamp */ -- cgit v1.2.3 From 5002200599429e83fc13e0d9a2d4788b79515b0c Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Sat, 1 Sep 2012 03:47:26 +0000 Subject: net: qmi_wwan: add several new Gobi devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado Cc: Thomas Tuttle Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 189e52d2eee6..adfab3fc5478 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -413,7 +413,9 @@ static const struct usb_device_id products[] = { /* 5. Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ + {QMI_GOBI_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */ {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */ @@ -441,6 +443,7 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ { } /* END */ -- cgit v1.2.3