From 2b6a6a90c31c550f839e905484f5253b9d24e33d Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 5 Dec 2013 06:53:41 +0100
Subject: ath10k: fix WEP Shared authentication

Frames received from FW were treated incorrectly.
This led to stations being unable to associate to
WEP Shared ath10k AP. This was indicated by a
bizarre hostapd message:

  Unsupported authentication algorithm (36088)

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1260a8d15dc3..9ea333a7789c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -937,7 +937,11 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	hdr = (struct ieee80211_hdr *)skb->data;
 	fc = le16_to_cpu(hdr->frame_control);
 
-	if (fc & IEEE80211_FCTL_PROTECTED) {
+	/* FW delivers WEP Shared Auth frame with Protected Bit set and
+	 * encrypted payload. However in case of PMF it delivers decrypted
+	 * frames with Protected Bit set. */
+	if (ieee80211_has_protected(hdr->frame_control) &&
+	    !ieee80211_is_auth(hdr->frame_control)) {
 		status->flag |= RX_FLAG_DECRYPTED | RX_FLAG_IV_STRIPPED |
 				RX_FLAG_MMIC_STRIPPED;
 		hdr->frame_control = __cpu_to_le16(fc &
-- 
cgit v1.2.3


From 2256940010aab059dc238ab81b7b562b17942ec8 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Fri, 13 Dec 2013 13:44:16 +0100
Subject: ath10k: handle TKIP MIC error correctly

We should check MIC error flag base on
rx_attention, to have consistent status
of MIC failure and FCS error.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.h    |  1 +
 drivers/net/wireless/ath/ath10k/htt_rx.c | 15 +++++++++++++++
 drivers/net/wireless/ath/ath10k/txrx.c   |  2 +-
 3 files changed, 17 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 7fc7919ea5f5..b93ae355bc08 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -1183,6 +1183,7 @@ struct htt_rx_info {
 	} rate;
 	bool fcs_err;
 	bool amsdu_more;
+	bool mic_err;
 };
 
 struct ath10k_htt {
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index fcb534f2f28f..fe8bd1b59f0e 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -838,6 +838,20 @@ static bool ath10k_htt_rx_has_fcs_err(struct sk_buff *skb)
 	return false;
 }
 
+static bool ath10k_htt_rx_has_mic_err(struct sk_buff *skb)
+{
+	struct htt_rx_desc *rxd;
+	u32 flags;
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	flags = __le32_to_cpu(rxd->attention.flags);
+
+	if (flags & RX_ATTENTION_FLAGS_TKIP_MIC_ERR)
+		return true;
+
+	return false;
+}
+
 static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb)
 {
 	struct htt_rx_desc *rxd;
@@ -960,6 +974,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 
 			info.skb     = msdu_head;
 			info.fcs_err = ath10k_htt_rx_has_fcs_err(msdu_head);
+			info.mic_err = ath10k_htt_rx_has_mic_err(msdu_head);
 			info.signal  = ATH10K_DEFAULT_NOISE_FLOOR;
 			info.signal += rx->ppdu.combined_rssi;
 
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 22829803f087..74f45fa6f428 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -231,7 +231,7 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
 				~IEEE80211_FCTL_PROTECTED);
 	}
 
-	if (info->status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
+	if (info->mic_err)
 		status->flag |= RX_FLAG_MMIC_ERROR;
 
 	if (info->fcs_err)
-- 
cgit v1.2.3


From 453cdb61c015f80e492dda217110353cd09eef18 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Fri, 13 Dec 2013 10:44:43 +0100
Subject: ath10k: fix band reporting for mgmt CCK frames on 5GHz

Although CCK modulation isn't expected for 11a if
it happened it made ath10k report wrong band
(2GHz) for a mgmt frame that were actually
received on 5Ghz band. Frequency would also
decoded incorrectly too.

In case of 5GHz-only devices this triggered
mac80211 WARN_ON because there was no according
sband pointer to be found.

The patch should fix delivery of such frames by
using different means to acquire band parameter.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 9ea333a7789c..3ec6c9a84e84 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -875,6 +875,7 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	struct wmi_mgmt_rx_event_v2 *ev_v2;
 	struct wmi_mgmt_rx_hdr_v1 *ev_hdr;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_channel *ch;
 	struct ieee80211_hdr *hdr;
 	u32 rx_status;
 	u32 channel;
@@ -927,7 +928,25 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	if (rx_status & WMI_RX_STATUS_ERR_MIC)
 		status->flag |= RX_FLAG_MMIC_ERROR;
 
-	status->band = phy_mode_to_band(phy_mode);
+	/* HW can Rx CCK rates on 5GHz. In that case phy_mode is set to
+	 * MODE_11B. This means phy_mode is not a reliable source for the band
+	 * of mgmt rx. */
+
+	ch = ar->scan_channel;
+	if (!ch)
+		ch = ar->rx_channel;
+
+	if (ch) {
+		status->band = ch->band;
+
+		if (phy_mode == MODE_11B &&
+		    status->band == IEEE80211_BAND_5GHZ)
+			ath10k_dbg(ATH10K_DBG_MGMT, "wmi mgmt rx 11b (CCK) on 5GHz\n");
+	} else {
+		ath10k_warn("using (unreliable) phy_mode to extract band for mgmt rx\n");
+		status->band = phy_mode_to_band(phy_mode);
+	}
+
 	status->freq = ieee80211_channel_to_frequency(channel, status->band);
 	status->signal = snr + ATH10K_DEFAULT_NOISE_FLOOR;
 	status->rate_idx = get_rate_idx(rate, status->band);
-- 
cgit v1.2.3


From f259509baafcf180c6146bc5bcc0ae7688e5017a Mon Sep 17 00:00:00 2001
From: Bartosz Markowski <bartosz.markowski@tieto.com>
Date: Tue, 10 Dec 2013 16:20:39 +0100
Subject: ath10k: split the if_limits and if_comb

Split the interface limits and inteface combination,
to reflect the 10.X capabilites (no P2P, no STA and 8 VAP).

kvalo: reverse order of ATH10K_FW_FEATURE_WMI_10X test, fix
checkpath warnings

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ce9ef3499ecb..52f618740cd9 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3464,14 +3464,12 @@ static const struct ieee80211_iface_limit ath10k_if_limits[] = {
 	},
 };
 
-#ifdef CONFIG_ATH10K_DFS_CERTIFIED
-static const struct ieee80211_iface_limit ath10k_if_dfs_limits[] = {
+static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
 	{
 	.max	= 8,
 	.types	= BIT(NL80211_IFTYPE_AP)
 	},
 };
-#endif
 
 static const struct ieee80211_iface_combination ath10k_if_comb[] = {
 	{
@@ -3481,19 +3479,22 @@ static const struct ieee80211_iface_combination ath10k_if_comb[] = {
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
 	},
-#ifdef CONFIG_ATH10K_DFS_CERTIFIED
+};
+
+static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
 	{
-		.limits = ath10k_if_dfs_limits,
-		.n_limits = ARRAY_SIZE(ath10k_if_dfs_limits),
+		.limits = ath10k_10x_if_limits,
+		.n_limits = ARRAY_SIZE(ath10k_10x_if_limits),
 		.max_interfaces = 8,
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
+#ifdef CONFIG_ATH10K_DFS_CERTIFIED
 		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 					BIT(NL80211_CHAN_WIDTH_20) |
 					BIT(NL80211_CHAN_WIDTH_40) |
 					BIT(NL80211_CHAN_WIDTH_80),
-	}
 #endif
+	},
 };
 
 static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
@@ -3717,8 +3718,15 @@ int ath10k_mac_register(struct ath10k *ar)
 	 */
 	ar->hw->queues = 4;
 
-	ar->hw->wiphy->iface_combinations = ath10k_if_comb;
-	ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ath10k_if_comb);
+	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
+		ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
+		ar->hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(ath10k_10x_if_comb);
+	} else {
+		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
+		ar->hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(ath10k_if_comb);
+	}
 
 	ar->hw->netdev_features = NETIF_F_HW_CSUM;
 
-- 
cgit v1.2.3


From d354181f4d9a4b91ddbc90327cba6692ef3779a1 Mon Sep 17 00:00:00 2001
From: Bartosz Markowski <bartosz.markowski@tieto.com>
Date: Tue, 10 Dec 2013 16:20:40 +0100
Subject: ath10k: introduce NO_P2P fw feature flag

Not each ath10k FW track supports P2P (10.X for instance does not)
This new firmware feature flag allows to turn off P2P interface type.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h | 3 +++
 drivers/net/wireless/ath/ath10k/mac.c  | 9 ++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 79726e0fe2f0..035cbf6d1abe 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -306,6 +306,9 @@ enum ath10k_fw_features {
 	/* firmware support tx frame management over WMI, otherwise it's HTT */
 	ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX = 2,
 
+	/* Firmware does not support P2P */
+	ATH10K_FW_FEATURE_NO_P2P = 3,
+
 	/* keep last */
 	ATH10K_FW_FEATURE_COUNT,
 };
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 52f618740cd9..5b45f3a8ec40 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3673,9 +3673,12 @@ int ath10k_mac_register(struct ath10k *ar)
 	ar->hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC) |
-		BIT(NL80211_IFTYPE_AP) |
-		BIT(NL80211_IFTYPE_P2P_CLIENT) |
-		BIT(NL80211_IFTYPE_P2P_GO);
+		BIT(NL80211_IFTYPE_AP);
+
+	if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
+		ar->hw->wiphy->interface_modes |=
+			BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			BIT(NL80211_IFTYPE_P2P_GO);
 
 	ar->hw->flags = IEEE80211_HW_SIGNAL_DBM |
 			IEEE80211_HW_SUPPORTS_PS |
-- 
cgit v1.2.3


From 685328b296acc810541d2532957912690273c64a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 6 Jan 2014 22:24:00 +0100
Subject: mac80211: remove channel_change_time

This value is no longer used by mac80211, and practically no
driver ever set it to a correct value anyway, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/adm8211.c                        |  1 -
 drivers/net/wireless/at76c50x-usb.c                   |  1 -
 drivers/net/wireless/ath/ath10k/mac.c                 |  1 -
 drivers/net/wireless/ath/ath5k/base.c                 |  1 -
 drivers/net/wireless/ath/ath9k/htc_drv_init.c         |  1 -
 drivers/net/wireless/ath/ath9k/init.c                 |  1 -
 drivers/net/wireless/ath/carl9170/main.c              | 12 ------------
 drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c |  1 -
 drivers/net/wireless/cw1200/main.c                    |  1 -
 drivers/net/wireless/mac80211_hwsim.c                 |  1 -
 drivers/net/wireless/mwl8k.c                          |  2 --
 drivers/net/wireless/p54/main.c                       |  1 -
 drivers/net/wireless/rtlwifi/base.c                   |  1 -
 drivers/net/wireless/ti/wl1251/main.c                 |  1 -
 drivers/net/wireless/ti/wlcore/main.c                 |  1 -
 drivers/staging/winbond/wbusb.c                       |  1 -
 include/net/mac80211.h                                |  3 ---
 17 files changed, 31 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index cfce83e1f273..54afde0463dd 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1866,7 +1866,6 @@ static int adm8211_probe(struct pci_dev *pdev,
 	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
 	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 
-	dev->channel_change_time = 1000;
 	dev->max_signal = 100;    /* FIXME: find better value */
 
 	dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 34c8a33cac06..8cfd1d6841b1 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -2112,7 +2112,6 @@ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
 	priv->pm_period = 0;
 
 	/* unit us */
-	priv->hw->channel_change_time = 100000;
 
 	return priv;
 }
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ce9ef3499ecb..747c8bd74980 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3704,7 +3704,6 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
 
-	ar->hw->channel_change_time = 5000;
 	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
 
 	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 69f58b073e85..fe6878b4ecd0 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2549,7 +2549,6 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
 	hw->wiphy->available_antennas_rx = 0x3;
 
 	hw->extra_tx_headroom = 2;
-	hw->channel_change_time = 5000;
 
 	/*
 	 * Mark the device as detached to avoid processing
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index c3676bf1d6c4..bcdb50af56d3 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -748,7 +748,6 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 			    WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 
 	hw->queues = 4;
-	hw->channel_change_time = 5000;
 	hw->max_listen_interval = 1;
 
 	hw->vif_data_size = sizeof(struct ath9k_htc_vif);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 609b7e13f3f0..d8787692c9d4 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -950,7 +950,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 
 	hw->queues = 4;
 	hw->max_rates = 4;
-	hw->channel_change_time = 5000;
 	hw->max_listen_interval = 1;
 	hw->max_rate_tries = 10;
 	hw->sta_data_size = sizeof(struct ath_node);
diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index 349fa22a921a..5ab68fddf7ba 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -1968,18 +1968,6 @@ static int carl9170_parse_eeprom(struct ar9170 *ar)
 		return -ENOMEM;
 	ar->num_channels = chans;
 
-	/*
-	 * I measured this, a bandswitch takes roughly
-	 * 135 ms and a frequency switch about 80.
-	 *
-	 * FIXME: measure these values again once EEPROM settings
-	 *	  are used, that will influence them!
-	 */
-	if (bands == 2)
-		ar->hw->channel_change_time = 135 * 1000;
-	else
-		ar->hw->channel_change_time = 80 * 1000;
-
 	regulatory->current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]);
 
 	/* second part of wiphy init */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index e71ce8c842a2..925034b80e9c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1071,7 +1071,6 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
 	hw->max_rates = 2;	/* Primary rate and 1 fallback rate */
 
 	/* channel change time is dependent on chip and band  */
-	hw->channel_change_time = 7 * 1000;
 	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 				     BIT(NL80211_IFTYPE_AP) |
 				     BIT(NL80211_IFTYPE_ADHOC);
diff --git a/drivers/net/wireless/cw1200/main.c b/drivers/net/wireless/cw1200/main.c
index 090f01577dd2..1be819dfac63 100644
--- a/drivers/net/wireless/cw1200/main.c
+++ b/drivers/net/wireless/cw1200/main.c
@@ -302,7 +302,6 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr,
 
 	hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
 
-	hw->channel_change_time = 1000;	/* TODO: find actual value */
 	hw->queues = 4;
 
 	priv->rts_threshold = -1;
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 9e7d7df03a47..59c65c37bccd 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2341,7 +2341,6 @@ static int __init init_mac80211_hwsim(void)
 		INIT_DELAYED_WORK(&data->roc_done, hw_roc_done);
 		INIT_DELAYED_WORK(&data->hw_scan, hw_scan_work);
 
-		hw->channel_change_time = 1;
 		hw->queues = 5;
 		hw->offchannel_tx_hw_queue = 4;
 		hw->wiphy->interface_modes =
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index b953ad621e0b..721c738a7dd8 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -5893,8 +5893,6 @@ static int mwl8k_firmware_load_success(struct mwl8k_priv *priv)
 
 	hw->extra_tx_headroom -= priv->ap_fw ? REDUCED_TX_HEADROOM : 0;
 
-	hw->channel_change_time = 10;
-
 	hw->queues = MWL8K_TX_WMM_QUEUES;
 
 	/* Set rssi values to dBm */
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 067e6f2fd050..b61fefad2205 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -757,7 +757,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 				      BIT(NL80211_IFTYPE_AP) |
 				      BIT(NL80211_IFTYPE_MESH_POINT);
 
-	dev->channel_change_time = 1000;	/* TODO: find actual value */
 	priv->beacon_req_id = cpu_to_le32(0);
 	priv->tx_stats[P54_QUEUE_BEACON].limit = 1;
 	priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1;
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index fcf9b621918c..2cfb6d4514cd 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -353,7 +353,6 @@ static void _rtl_init_mac80211(struct ieee80211_hw *hw)
 
 	/* TODO: Correct this value for our hw */
 	/* TODO: define these hard code value */
-	hw->channel_change_time = 100;
 	hw->max_listen_interval = 10;
 	hw->max_rate_tries = 4;
 	/* hw->max_rates = 1; */
diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index 3291ffa95273..ee4ec4e5660d 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -1347,7 +1347,6 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 
 	/* unit us */
 	/* FIXME: find a proper value */
-	wl->hw->channel_change_time = 10000;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		IEEE80211_HW_SUPPORTS_PS |
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index e9da47cead58..18a009e593c7 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5710,7 +5710,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 
 	/* unit us */
 	/* FIXME: find a proper value */
-	wl->hw->channel_change_time = 10000;
 	wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 07891a3e316e..0d29624416c3 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -788,7 +788,6 @@ static int wb35_probe(struct usb_interface *intf,
 	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
 	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 
-	dev->channel_change_time = 1000;
 	dev->max_signal = 100;
 	dev->queues = 1;
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f838af816b56..25b18877747f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1616,8 +1616,6 @@ enum ieee80211_hw_flags {
  * @extra_beacon_tailroom: tailroom to reserve in each beacon tx skb.
  *	Can be used by drivers to add extra IEs.
  *
- * @channel_change_time: time (in microseconds) it takes to change channels.
- *
  * @max_signal: Maximum value for signal (rssi) in RX information, used
  *	only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
  *
@@ -1699,7 +1697,6 @@ struct ieee80211_hw {
 	u32 flags;
 	unsigned int extra_tx_headroom;
 	unsigned int extra_beacon_tailroom;
-	int channel_change_time;
 	int vif_data_size;
 	int sta_data_size;
 	int chanctx_data_size;
-- 
cgit v1.2.3


From baccfe6e86443c8b7ba7f21144eedfb100ecf816 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Mon, 23 Dec 2013 08:38:27 +0200
Subject: ath10k: add DFS_CERTIFIED option

Add Kconfig option that allow DFS functionality.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/Kconfig | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 82e8088ca9b4..a6f5285235af 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -37,3 +37,10 @@ config ATH10K_TRACING
 	---help---
 	  Select this to ath10k use tracing infrastructure.
 
+config ATH10K_DFS_CERTIFIED
+	bool "Atheros DFS support for certified platforms"
+	depends on ATH10K && CFG80211_CERTIFICATION_ONUS
+	default n
+	---help---
+	This option enables DFS support for initiating radiation on
+	ath10k.
-- 
cgit v1.2.3


From cdf074099babdda9dccae7d421bd5566d70e75e3 Mon Sep 17 00:00:00 2001
From: Marek Puzyniak <marek.puzyniak@tieto.com>
Date: Mon, 30 Dec 2013 09:07:51 +0100
Subject: ath10k: disable STA kickout in FW

Currently ath10k is not using STA KICKOUT firmware functionality.
In order to avoid unwanted WMI_PEER_STA_KICKOUT_EVENT event this functionality
should be disabled when not used.

Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5b45f3a8ec40..2a4e7aa4611a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2205,7 +2205,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	enum wmi_sta_powersave_param param;
 	int ret = 0;
-	u32 value;
+	u32 value, param_id;
 	int bit;
 	u32 vdev_param;
 
@@ -2297,6 +2297,13 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 			ath10k_warn("Failed to create peer for AP: %d\n", ret);
 			goto err_vdev_delete;
 		}
+
+		param_id = ar->wmi.pdev_param->sta_kickout_th;
+
+		/* Disable STA KICKOUT functionality in FW */
+		ret = ath10k_wmi_pdev_set_param(ar, param_id, 0);
+		if (ret)
+			ath10k_warn("Failed to disable STA KICKOUT\n");
 	}
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
-- 
cgit v1.2.3


From 0e759f363e9f2f1b1a7a640b15ca613e5e27dfc0 Mon Sep 17 00:00:00 2001
From: Bartosz Markowski <bartosz.markowski@tieto.com>
Date: Thu, 2 Jan 2014 14:38:33 +0100
Subject: ath10k: track number of existing peers

To not exceed number of allowed clients (AP mode), make sure to
check how many of them are already on the peers list.

10.X firmware support up to 127 peers, non-AP centric firmwares 16.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  3 +++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 drivers/net/wireless/ath/ath10k/mac.c  | 28 +++++++++++++++++++++++++---
 3 files changed, 29 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 035cbf6d1abe..9d8fc29b1897 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -432,6 +432,9 @@ struct ath10k {
 	struct list_head peers;
 	wait_queue_head_t peer_mapping_wq;
 
+	/* number of created peers; protected by data_lock */
+	int num_peers;
+
 	struct work_struct offchan_tx_work;
 	struct sk_buff_head offchan_tx_queue;
 	struct completion offchan_tx_completed;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 9535eaa09f09..f1505a25d810 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -115,6 +115,7 @@ enum ath10k_mcast2ucast_mode {
 #define TARGET_10X_MAC_AGGR_DELIM		0
 #define TARGET_10X_AST_SKID_LIMIT		16
 #define TARGET_10X_NUM_PEERS			(128 + (TARGET_10X_NUM_VDEVS))
+#define TARGET_10X_NUM_PEERS_MAX		128
 #define TARGET_10X_NUM_OFFLOAD_PEERS		0
 #define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS	0
 #define TARGET_10X_NUM_PEER_KEYS		2
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2a4e7aa4611a..ce0f1db24731 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -332,6 +332,9 @@ static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
 		ath10k_warn("Failed to wait for created wmi peer: %i\n", ret);
 		return ret;
 	}
+	spin_lock_bh(&ar->data_lock);
+	ar->num_peers++;
+	spin_unlock_bh(&ar->data_lock);
 
 	return 0;
 }
@@ -377,6 +380,10 @@ static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
 	if (ret)
 		return ret;
 
+	spin_lock_bh(&ar->data_lock);
+	ar->num_peers--;
+	spin_unlock_bh(&ar->data_lock);
+
 	return 0;
 }
 
@@ -396,6 +403,7 @@ static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
 
 		list_del(&peer->list);
 		kfree(peer);
+		ar->num_peers--;
 	}
 	spin_unlock_bh(&ar->data_lock);
 }
@@ -411,6 +419,7 @@ static void ath10k_peer_cleanup_all(struct ath10k *ar)
 		list_del(&peer->list);
 		kfree(peer);
 	}
+	ar->num_peers = 0;
 	spin_unlock_bh(&ar->data_lock);
 }
 
@@ -2849,6 +2858,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 {
 	struct ath10k *ar = hw->priv;
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int max_num_peers;
 	int ret = 0;
 
 	mutex_lock(&ar->conf_mutex);
@@ -2859,9 +2869,21 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * New station addition.
 		 */
+		if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+			max_num_peers = TARGET_10X_NUM_PEERS_MAX - 1;
+		else
+			max_num_peers = TARGET_NUM_PEERS;
+
+		if (ar->num_peers >= max_num_peers) {
+			ath10k_warn("Number of peers exceeded: peers number %d (max peers %d)\n",
+				    ar->num_peers, max_num_peers);
+			ret = -ENOBUFS;
+			goto exit;
+		}
+
 		ath10k_dbg(ATH10K_DBG_MAC,
-			   "mac vdev %d peer create %pM (new sta)\n",
-			   arvif->vdev_id, sta->addr);
+			   "mac vdev %d peer create %pM (new sta) num_peers %d\n",
+			   arvif->vdev_id, sta->addr, ar->num_peers);
 
 		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
 		if (ret)
@@ -2911,7 +2933,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			ath10k_warn("Failed to disassociate station: %pM\n",
 				    sta->addr);
 	}
-
+exit:
 	mutex_unlock(&ar->conf_mutex);
 	return ret;
 }
-- 
cgit v1.2.3


From 2fe5288c11dae71c178a9d948347933b0b76a5f5 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Fri, 3 Jan 2014 12:59:20 +0200
Subject: ath10k: handle WMI debug print events

Firmware can send simple ascii strings as debug messages using
WMI_DEBUG_PRINT_EVENTID, print those with ATH10K_DBG_WMI log level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 3ec6c9a84e84..f9925708f588 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/skbuff.h>
+#include <linux/ctype.h>
 
 #include "core.h"
 #include "htc.h"
@@ -1676,9 +1677,37 @@ static void ath10k_wmi_event_profile_match(struct ath10k *ar,
 }
 
 static void ath10k_wmi_event_debug_print(struct ath10k *ar,
-				  struct sk_buff *skb)
+					 struct sk_buff *skb)
 {
-	ath10k_dbg(ATH10K_DBG_WMI, "WMI_DEBUG_PRINT_EVENTID\n");
+	char buf[101], c;
+	int i;
+
+	for (i = 0; i < sizeof(buf) - 1; i++) {
+		if (i >= skb->len)
+			break;
+
+		c = skb->data[i];
+
+		if (c == '\0')
+			break;
+
+		if (isascii(c) && isprint(c))
+			buf[i] = c;
+		else
+			buf[i] = '.';
+	}
+
+	if (i == sizeof(buf) - 1)
+		ath10k_warn("wmi debug print truncated: %d\n", skb->len);
+
+	/* for some reason the debug prints end with \n, remove that */
+	if (skb->data[i - 1] == '\n')
+		i--;
+
+	/* the last byte is always reserved for the null character */
+	buf[i] = '\0';
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi event debug print '%s'\n", buf);
 }
 
 static void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb)
-- 
cgit v1.2.3


From 869526b958f59592c46086c11f638824b08d164a Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Fri, 3 Jan 2014 12:59:26 +0200
Subject: ath10k: add trace event for WMI_DEBUG_MESG_EVENTID

Send firmware WMI debug logs to user space for further processing.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/trace.h | 21 +++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c   |  9 +++++++--
 2 files changed, 28 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h
index 90817ddc92ba..4eb2ecbc06ef 100644
--- a/drivers/net/wireless/ath/ath10k/trace.h
+++ b/drivers/net/wireless/ath/ath10k/trace.h
@@ -182,6 +182,27 @@ TRACE_EVENT(ath10k_htt_stats,
 	)
 );
 
+TRACE_EVENT(ath10k_wmi_dbglog,
+	TP_PROTO(void *buf, size_t buf_len),
+
+	TP_ARGS(buf, buf_len),
+
+	TP_STRUCT__entry(
+		__field(size_t, buf_len)
+		__dynamic_array(u8, buf, buf_len)
+	),
+
+	TP_fast_assign(
+		__entry->buf_len = buf_len;
+		memcpy(__get_dynamic_array(buf), buf, buf_len);
+	),
+
+	TP_printk(
+		"len %zu",
+		__entry->buf_len
+	)
+);
+
 #endif /* _TRACE_H_ || TRACE_HEADER_MULTI_READ*/
 
 /* we don't want to use include/trace/events */
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index f9925708f588..4e043bb6234b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1071,9 +1071,14 @@ static void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb)
 	ath10k_dbg(ATH10K_DBG_WMI, "WMI_ECHO_EVENTID\n");
 }
 
-static void ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb)
+static int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb)
 {
-	ath10k_dbg(ATH10K_DBG_WMI, "WMI_DEBUG_MESG_EVENTID\n");
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi event debug mesg len %d\n",
+		   skb->len);
+
+	trace_ath10k_wmi_dbglog(skb->data, skb->len);
+
+	return 0;
 }
 
 static void ath10k_wmi_event_update_stats(struct ath10k *ar,
-- 
cgit v1.2.3


From f118a3e515fd713a0ade315018f6b645bc98916e Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Fri, 3 Jan 2014 12:59:31 +0200
Subject: ath10k: add debugfs file to control firmware dbglog

Firmware dbglogs can be now enabled through fw_dbglog file. To enable all
possible log messages run:

echo 0xffffffff > /sys/kernel/debug/ieee80211/phy0/ath10k/fw_dbglog

And to put back firmare defaults use 0x0:

echo 0x0 > /sys/kernel/debug/ieee80211/phy0/ath10k/fw_dbglog

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h  |  2 +
 drivers/net/wireless/ath/ath10k/debug.c | 66 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c   | 37 ++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h   | 49 ++++++++++++++++++++++++
 4 files changed, 154 insertions(+)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 9d8fc29b1897..3721c43e2941 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -272,6 +272,8 @@ struct ath10k_debug {
 	struct delayed_work htt_stats_dwork;
 	struct ath10k_dfs_stats dfs_stats;
 	struct ath_dfs_pool_stats dfs_pool_stats;
+
+	u32 fw_dbglog_mask;
 };
 
 enum ath10k_state {
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 6bdfad3144af..6debd281350a 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -614,6 +614,61 @@ static const struct file_operations fops_htt_stats_mask = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_read_fw_dbglog(struct file *file,
+					    char __user *user_buf,
+					    size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	unsigned int len;
+	char buf[32];
+
+	len = scnprintf(buf, sizeof(buf), "0x%08x\n",
+			ar->debug.fw_dbglog_mask);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_write_fw_dbglog(struct file *file,
+				      const char __user *user_buf,
+				      size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	unsigned long mask;
+	int ret;
+
+	ret = kstrtoul_from_user(user_buf, count, 0, &mask);
+	if (ret)
+		return ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ar->debug.fw_dbglog_mask = mask;
+
+	if (ar->state == ATH10K_STATE_ON) {
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		if (ret) {
+			ath10k_warn("dbglog cfg failed from debugfs: %d\n",
+				    ret);
+			goto exit;
+		}
+	}
+
+	ret = count;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+
+	return ret;
+}
+
+static const struct file_operations fops_fw_dbglog = {
+	.read = ath10k_read_fw_dbglog,
+	.write = ath10k_write_fw_dbglog,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 int ath10k_debug_start(struct ath10k *ar)
 {
 	int ret;
@@ -625,6 +680,14 @@ int ath10k_debug_start(struct ath10k *ar)
 		/* continue normally anyway, this isn't serious */
 		ath10k_warn("failed to start htt stats workqueue: %d\n", ret);
 
+	if (ar->debug.fw_dbglog_mask) {
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		if (ret)
+			/* not serious */
+			ath10k_warn("failed to enable dbglog during start: %d",
+				    ret);
+	}
+
 	return 0;
 }
 
@@ -747,6 +810,9 @@ int ath10k_debug_create(struct ath10k *ar)
 	debugfs_create_file("htt_stats_mask", S_IRUSR, ar->debug.debugfs_phy,
 			    ar, &fops_htt_stats_mask);
 
+	debugfs_create_file("fw_dbglog", S_IRUSR, ar->debug.debugfs_phy,
+			    ar, &fops_fw_dbglog);
+
 	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
 		debugfs_create_file("dfs_simulate_radar", S_IWUSR,
 				    ar->debug.debugfs_phy, ar,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 4e043bb6234b..712a606a080a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3502,3 +3502,40 @@ int ath10k_wmi_force_fw_hang(struct ath10k *ar,
 		   type, delay_ms);
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
 }
+
+int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable)
+{
+	struct wmi_dbglog_cfg_cmd *cmd;
+	struct sk_buff *skb;
+	u32 cfg;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_dbglog_cfg_cmd *)skb->data;
+
+	if (module_enable) {
+		cfg = SM(ATH10K_DBGLOG_LEVEL_VERBOSE,
+			 ATH10K_DBGLOG_CFG_LOG_LVL);
+	} else {
+		/* set back defaults, all modules with WARN level */
+		cfg = SM(ATH10K_DBGLOG_LEVEL_WARN,
+			 ATH10K_DBGLOG_CFG_LOG_LVL);
+		module_enable = ~0;
+	}
+
+	cmd->module_enable = __cpu_to_le32(module_enable);
+	cmd->module_valid = __cpu_to_le32(~0);
+	cmd->config_enable = __cpu_to_le32(cfg);
+	cmd->config_valid = __cpu_to_le32(ATH10K_DBGLOG_CFG_LOG_LVL_MASK);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi dbglog cfg modules %08x %08x config %08x %08x\n",
+		   __le32_to_cpu(cmd->module_enable),
+		   __le32_to_cpu(cmd->module_valid),
+		   __le32_to_cpu(cmd->config_enable),
+		   __le32_to_cpu(cmd->config_valid));
+
+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->dbglog_cfg_cmdid);
+}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 0087d699b85b..4aa1489f4eb2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4090,6 +4090,54 @@ struct wmi_force_fw_hang_cmd {
 	__le32 delay_ms;
 } __packed;
 
+enum ath10k_dbglog_level {
+	ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
+	ATH10K_DBGLOG_LEVEL_INFO = 1,
+	ATH10K_DBGLOG_LEVEL_WARN = 2,
+	ATH10K_DBGLOG_LEVEL_ERR = 3,
+};
+
+/* VAP ids to enable dbglog */
+#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB		0
+#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK		0x0000ffff
+
+/* to enable dbglog in the firmware */
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB	16
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK	0x00010000
+
+/* timestamp resolution */
+#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB	17
+#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK	0x000E0000
+
+/* number of queued messages before sending them to the host */
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB	20
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK	0x0ff00000
+
+/*
+ * Log levels to enable. This defines the minimum level to enable, this is
+ * not a bitmask. See enum ath10k_dbglog_level for the values.
+ */
+#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB		28
+#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK		0x70000000
+
+/*
+ * Note: this is a cleaned up version of a struct firmware uses. For
+ * example, config_valid was hidden inside an array.
+ */
+struct wmi_dbglog_cfg_cmd {
+	/* bitmask to hold mod id config*/
+	__le32 module_enable;
+
+	/* see ATH10K_DBGLOG_CFG_ */
+	__le32 config_enable;
+
+	/* mask of module id bits to be changed */
+	__le32 module_valid;
+
+	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
+	__le32 config_valid;
+} __packed;
+
 #define ATH10K_RTS_MAX		2347
 #define ATH10K_FRAGMT_THRESHOLD_MIN	540
 #define ATH10K_FRAGMT_THRESHOLD_MAX	2346
@@ -4167,5 +4215,6 @@ int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
 int ath10k_wmi_force_fw_hang(struct ath10k *ar,
 			     enum wmi_force_fw_hang_type type, u32 delay_ms);
 int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable);
 
 #endif /* _WMI_H_ */
-- 
cgit v1.2.3


From 51ab1a0a09a894442e8b091d57222c5425b6d700 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Wed, 8 Jan 2014 09:08:33 +0100
Subject: ath10k: add set_bitrate_mask callback

Add set_bitrate_mask callback. Currently
ath10k HW is limited to handle only single
fixed rate setting or limit number of used
spatial streams.

Example:
iw wlanX set bitrates legacy-5 ht-mcs-5 vht-mcs-5 2:9
will setup VHT, nss=2, mcs=9

iw wlanX set bitrates legacy-5 18 ht-mcs-5 vht-mcs-5
will setup legacy, 18Mbps

iw wlanX set bitrates legacy-5 ht-mcs-5 3 vht-mcs-5
will setup HT, nss=1, mcs=3

iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9
will setup nss=1

iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9 2:0-9
will setup nss=2

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |   3 +
 drivers/net/wireless/ath/ath10k/mac.c  | 302 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h  |  12 ++
 3 files changed, 317 insertions(+)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 3721c43e2941..ade1781c7186 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -253,6 +253,9 @@ struct ath10k_vif {
 			u8 bssid[ETH_ALEN];
 		} ibss;
 	} u;
+
+	u8 fixed_rate;
+	u8 fixed_nss;
 };
 
 struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ce0f1db24731..7aa6c4d702d6 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3339,6 +3339,307 @@ exit:
 	return ret;
 }
 
+/* Helper table for legacy fixed_rate/bitrate_mask */
+static const u8 cck_ofdm_rate[] = {
+	/* CCK */
+	3, /* 1Mbps */
+	2, /* 2Mbps */
+	1, /* 5.5Mbps */
+	0, /* 11Mbps */
+	/* OFDM */
+	3, /* 6Mbps */
+	7, /* 9Mbps */
+	2, /* 12Mbps */
+	6, /* 18Mbps */
+	1, /* 24Mbps */
+	5, /* 36Mbps */
+	0, /* 48Mbps */
+	4, /* 54Mbps */
+};
+
+/* Check if only one bit set */
+static int ath10k_check_single_mask(u32 mask)
+{
+	int bit;
+
+	bit = ffs(mask);
+	if (!bit)
+		return 0;
+
+	mask &= ~BIT(bit - 1);
+	if (mask)
+		return 2;
+
+	return 1;
+}
+
+static bool
+ath10k_default_bitrate_mask(struct ath10k *ar,
+			    enum ieee80211_band band,
+			    const struct cfg80211_bitrate_mask *mask)
+{
+	u32 legacy = 0x00ff;
+	u8 ht = 0xff, i;
+	u16 vht = 0x3ff;
+
+	switch (band) {
+	case IEEE80211_BAND_2GHZ:
+		legacy = 0x00fff;
+		vht = 0;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		break;
+	default:
+		return false;
+	}
+
+	if (mask->control[band].legacy != legacy)
+		return false;
+
+	for (i = 0; i < ar->num_rf_chains; i++)
+		if (mask->control[band].ht_mcs[i] != ht)
+			return false;
+
+	for (i = 0; i < ar->num_rf_chains; i++)
+		if (mask->control[band].vht_mcs[i] != vht)
+			return false;
+
+	return true;
+}
+
+static bool
+ath10k_bitrate_mask_nss(const struct cfg80211_bitrate_mask *mask,
+			enum ieee80211_band band,
+			u8 *fixed_nss)
+{
+	int ht_nss = 0, vht_nss = 0, i;
+
+	/* check legacy */
+	if (ath10k_check_single_mask(mask->control[band].legacy))
+		return false;
+
+	/* check HT */
+	for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
+		if (mask->control[band].ht_mcs[i] == 0xff)
+			continue;
+		else if (mask->control[band].ht_mcs[i] == 0x00)
+			break;
+		else
+			return false;
+	}
+
+	ht_nss = i;
+
+	/* check VHT */
+	for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
+		if (mask->control[band].vht_mcs[i] == 0x03ff)
+			continue;
+		else if (mask->control[band].vht_mcs[i] == 0x0000)
+			break;
+		else
+			return false;
+	}
+
+	vht_nss = i;
+
+	if (ht_nss > 0 && vht_nss > 0)
+		return false;
+
+	if (ht_nss)
+		*fixed_nss = ht_nss;
+	else if (vht_nss)
+		*fixed_nss = vht_nss;
+	else
+		return false;
+
+	return true;
+}
+
+static bool
+ath10k_bitrate_mask_correct(const struct cfg80211_bitrate_mask *mask,
+			    enum ieee80211_band band,
+			    enum wmi_rate_preamble *preamble)
+{
+	int legacy = 0, ht = 0, vht = 0, i;
+
+	*preamble = WMI_RATE_PREAMBLE_OFDM;
+
+	/* check legacy */
+	legacy = ath10k_check_single_mask(mask->control[band].legacy);
+	if (legacy > 1)
+		return false;
+
+	/* check HT */
+	for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+		ht += ath10k_check_single_mask(mask->control[band].ht_mcs[i]);
+	if (ht > 1)
+		return false;
+
+	/* check VHT */
+	for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+		vht += ath10k_check_single_mask(mask->control[band].vht_mcs[i]);
+	if (vht > 1)
+		return false;
+
+	/* Currently we support only one fixed_rate */
+	if ((legacy + ht + vht) != 1)
+		return false;
+
+	if (ht)
+		*preamble = WMI_RATE_PREAMBLE_HT;
+	else if (vht)
+		*preamble = WMI_RATE_PREAMBLE_VHT;
+
+	return true;
+}
+
+static bool
+ath10k_bitrate_mask_rate(const struct cfg80211_bitrate_mask *mask,
+			 enum ieee80211_band band,
+			 u8 *fixed_rate,
+			 u8 *fixed_nss)
+{
+	u8 rate = 0, pream = 0, nss = 0, i;
+	enum wmi_rate_preamble preamble;
+
+	/* Check if single rate correct */
+	if (!ath10k_bitrate_mask_correct(mask, band, &preamble))
+		return false;
+
+	pream = preamble;
+
+	switch (preamble) {
+	case WMI_RATE_PREAMBLE_CCK:
+	case WMI_RATE_PREAMBLE_OFDM:
+		i = ffs(mask->control[band].legacy) - 1;
+
+		if (band == IEEE80211_BAND_2GHZ && i < 4)
+			pream = WMI_RATE_PREAMBLE_CCK;
+
+		if (band == IEEE80211_BAND_5GHZ)
+			i += 4;
+
+		if (i >= ARRAY_SIZE(cck_ofdm_rate))
+			return false;
+
+		rate = cck_ofdm_rate[i];
+		break;
+	case WMI_RATE_PREAMBLE_HT:
+		for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+			if (mask->control[band].ht_mcs[i])
+				break;
+
+		if (i == IEEE80211_HT_MCS_MASK_LEN)
+			return false;
+
+		rate = ffs(mask->control[band].ht_mcs[i]) - 1;
+		nss = i;
+		break;
+	case WMI_RATE_PREAMBLE_VHT:
+		for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+			if (mask->control[band].vht_mcs[i])
+				break;
+
+		if (i == NL80211_VHT_NSS_MAX)
+			return false;
+
+		rate = ffs(mask->control[band].vht_mcs[i]) - 1;
+		nss = i;
+		break;
+	}
+
+	*fixed_nss = nss + 1;
+	nss <<= 4;
+	pream <<= 6;
+
+	ath10k_dbg(ATH10K_DBG_MAC, "mac fixed rate pream 0x%02x nss 0x%02x rate 0x%02x\n",
+		   pream, nss, rate);
+
+	*fixed_rate = pream | nss | rate;
+
+	return true;
+}
+
+static bool ath10k_get_fixed_rate_nss(const struct cfg80211_bitrate_mask *mask,
+				      enum ieee80211_band band,
+				      u8 *fixed_rate,
+				      u8 *fixed_nss)
+{
+	/* First check full NSS mask, if we can simply limit NSS */
+	if (ath10k_bitrate_mask_nss(mask, band, fixed_nss))
+		return true;
+
+	/* Next Check single rate is set */
+	return ath10k_bitrate_mask_rate(mask, band, fixed_rate, fixed_nss);
+}
+
+static int ath10k_set_fixed_rate_param(struct ath10k_vif *arvif,
+				       u8 fixed_rate,
+				       u8 fixed_nss)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 vdev_param;
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (arvif->fixed_rate == fixed_rate &&
+	    arvif->fixed_nss == fixed_nss)
+		goto exit;
+
+	if (fixed_rate == WMI_FIXED_RATE_NONE)
+		ath10k_dbg(ATH10K_DBG_MAC, "mac disable fixed bitrate mask\n");
+
+	vdev_param = ar->wmi.vdev_param->fixed_rate;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					vdev_param, fixed_rate);
+	if (ret) {
+		ath10k_warn("Could not set fixed_rate param 0x%02x: %d\n",
+			    fixed_rate, ret);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	arvif->fixed_rate = fixed_rate;
+
+	vdev_param = ar->wmi.vdev_param->nss;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					vdev_param, fixed_nss);
+
+	if (ret) {
+		ath10k_warn("Could not set fixed_nss param %d: %d\n",
+			    fixed_nss, ret);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	arvif->fixed_nss = fixed_nss;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   const struct cfg80211_bitrate_mask *mask)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k *ar = arvif->ar;
+	enum ieee80211_band band = ar->hw->conf.chandef.chan->band;
+	u8 fixed_rate = WMI_FIXED_RATE_NONE;
+	u8 fixed_nss = ar->num_rf_chains;
+
+	if (!ath10k_default_bitrate_mask(ar, band, mask)) {
+		if (!ath10k_get_fixed_rate_nss(mask, band,
+					       &fixed_rate,
+					       &fixed_nss))
+			return -EINVAL;
+	}
+
+	return ath10k_set_fixed_rate_param(arvif, fixed_rate, fixed_nss);
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_tx,
 	.start				= ath10k_start,
@@ -3361,6 +3662,7 @@ static const struct ieee80211_ops ath10k_ops = {
 	.tx_last_beacon			= ath10k_tx_last_beacon,
 	.restart_complete		= ath10k_restart_complete,
 	.get_survey			= ath10k_get_survey,
+	.set_bitrate_mask		= ath10k_set_bitrate_mask,
 #ifdef CONFIG_PM
 	.suspend			= ath10k_suspend,
 	.resume				= ath10k_resume,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 4aa1489f4eb2..4b5e7d3d32b6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3003,6 +3003,18 @@ struct wmi_vdev_install_key_arg {
 	const void *key_data;
 };
 
+/*
+ * vdev fixed rate format:
+ * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
+ * - nss      - b5:b4 - ss number (0 mean 1ss)
+ * - rate_mcs - b3:b0 - as below
+ *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
+ *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
+ *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
+ *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
+ *    HT/VHT: MCS index
+ */
+
 /* Preamble types to be used with VDEV fixed rate configuration */
 enum wmi_rate_preamble {
 	WMI_RATE_PREAMBLE_OFDM,
-- 
cgit v1.2.3


From 8fc685803a8d7b42a5f69dcad7f7cef6f8b60edf Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Date: Sat, 14 Dec 2013 20:09:05 +0100
Subject: ath: fix warning on usage of REGULATORY_CUSTOM_REG

ath wants to first apply the custom regd and only later
will it revert to not using it if an alpha2 regulatory
domain is found. Since the wireless core now enforces
usage of the REGULATORY_CUSTOM_REG strictly when
wiphy_apply_custom_regulatory() is used this makes
ath adhere to the expected behaviour but also updates
the wiphy after its done with the custom usage.

This fixes this warning:

[    5.488733] ath: phy0: ASPM enabled: 0x43
[    5.488735] ath: EEPROM regdomain: 0x0
[    5.488736] ath: EEPROM indicates default country code should be used
[    5.488736] ath: doing EEPROM country->regdmn map search
[    5.488737] ath: country maps to regdmn code: 0x3a
[    5.488737] ath: Country alpha2 being used: US
[    5.488738] ath: Regpair used: 0x3a
[    5.488738] ------------[ cut here ]------------
[    5.488745] WARNING: CPU: 0 PID: 161 at
	/home/sujith/dev/wireless-testing/net/wireless/reg.c:1361
	wiphy_apply_custom_regulatory+0x17a/0x1b0 [cfg80211]()
[    5.488746] wiphy should have REGULATORY_CUSTOM_REG

The wireless core can *later* lift this flag for us for when
using the regulatory_hint() to make this fix more generic.

Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/regd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 9e154732afaa..56c3d05c6224 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -632,7 +632,8 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 	const struct ieee80211_regdomain *regd;
 
 	wiphy->reg_notifier = reg_notifier;
-	wiphy->regulatory_flags |= REGULATORY_STRICT_REG;
+	wiphy->regulatory_flags |= REGULATORY_STRICT_REG |
+				   REGULATORY_CUSTOM_REG;
 
 	if (ath_is_world_regd(reg)) {
 		/*
@@ -640,8 +641,7 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 		 * saved on the wiphy orig_* parameters
 		 */
 		regd = ath_world_regdomain(reg);
-		wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
-					   REGULATORY_COUNTRY_IE_FOLLOW_POWER;
+		wiphy->regulatory_flags |= REGULATORY_COUNTRY_IE_FOLLOW_POWER;
 	} else {
 		/*
 		 * This gets applied in the case of the absence of CRDA,
@@ -650,7 +650,10 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 		 */
 		regd = ath_default_world_regdomain();
 	}
+
 	wiphy_apply_custom_regulatory(wiphy, regd);
+	if (!ath_is_world_regd(reg))
+		wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG;
 	ath_reg_apply_radar_flags(wiphy);
 	ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
 	return 0;
-- 
cgit v1.2.3


From 4f7b91404cd5da3657a82b00394f4f5dfbff13d6 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Date: Sat, 14 Dec 2013 20:09:06 +0100
Subject: cfg80211: make regulatory_hint() remove REGULATORY_CUSTOM_REG

The REGULATORY_CUSTOM_REG can be used during early init with
the goal of overriding the wiphy's default regulatory settings
in case the alpha2 of the device is not known. In the case that
the alpha2 becomes known lets avoid having drivers having to
clear the REGULATORY_CUSTOM_REG flag by doing it for them
when regulatory_hint() is used.

Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/regd.c | 2 --
 include/net/regulatory.h        | 4 ++++
 net/wireless/reg.c              | 2 ++
 3 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 56c3d05c6224..e5e905910db4 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -652,8 +652,6 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 	}
 
 	wiphy_apply_custom_regulatory(wiphy, regd);
-	if (!ath_is_world_regd(reg))
-		wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG;
 	ath_reg_apply_radar_flags(wiphy);
 	ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
 	return 0;
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index c96a0b86f342..b07cdc9fa454 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -96,6 +96,10 @@ struct regulatory_request {
  *	initiator is %REGDOM_SET_BY_CORE). Drivers that use
  *	wiphy_apply_custom_regulatory() should have this flag set
  *	or the regulatory core will set it for the wiphy.
+ *	If you use regulatory_hint() *after* using
+ *	wiphy_apply_custom_regulatory() the wireless core will
+ *	clear the REGULATORY_CUSTOM_REG for your wiphy as it would be
+ *	implied that the device somehow gained knowledge of its region.
  * @REGULATORY_STRICT_REG: tells us that the wiphy for this device
  *	has regulatory domain that it wishes to be considered as the
  *	superset for regulatory rules. After this device gets its regulatory
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 7d20d844ca60..9b897fca7487 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1853,6 +1853,8 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
 	if (WARN_ON(!alpha2 || !wiphy))
 		return -EINVAL;
 
+	wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG;
+
 	request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
 	if (!request)
 		return -ENOMEM;
-- 
cgit v1.2.3


From 1cdbaf0d3410b334255f638a2d69286ce2d775ec Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 13 Jan 2014 07:29:27 +0530
Subject: ath9k: Add an option for station statistics

Also, rename node_stat to node_aggr.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/Kconfig     |  8 +++
 drivers/net/wireless/ath/ath9k/Makefile    |  2 +
 drivers/net/wireless/ath/ath9k/debug.c     | 80 ------------------------
 drivers/net/wireless/ath/ath9k/debug_sta.c | 97 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/main.c      |  2 +-
 5 files changed, 108 insertions(+), 81 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/debug_sta.c

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 30d273c61bff..7b96b3e5712d 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -65,6 +65,14 @@ config ATH9K_DEBUGFS
 
 	  Also required for changing debug message flags at run time.
 
+config ATH9K_STATION_STATISTICS
+	bool "Detailed station statistics"
+	depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
+	select MAC80211_DEBUGFS
+	default n
+	---help---
+	  This option enables detailed statistics for association stations.
+
 config ATH9K_DFS_CERTIFIED
 	bool "Atheros DFS support for certified platforms"
 	depends on ATH9K && CFG80211_CERTIFICATION_ONUS
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index e9904e5ccd81..a40e5c5d7418 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -19,6 +19,8 @@ ath9k-$(CONFIG_ATH9K_WOW) += wow.o
 ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o \
 				 spectral.o
 
+ath9k-$(CONFIG_ATH9K_STATION_STATISTICS) += debug_sta.o
+
 obj-$(CONFIG_ATH9K) += ath9k.o
 
 ath9k_hw-y:=	\
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index b041052a10ee..5bdc938ec5ed 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1322,86 +1322,6 @@ static const struct file_operations fops_btcoex = {
 };
 #endif
 
-static ssize_t read_file_node_stat(struct file *file, char __user *user_buf,
-				   size_t count, loff_t *ppos)
-{
-	struct ath_node *an = file->private_data;
-	struct ath_softc *sc = an->sc;
-	struct ath_atx_tid *tid;
-	struct ath_atx_ac *ac;
-	struct ath_txq *txq;
-	u32 len = 0, size = 4096;
-	char *buf;
-	size_t retval;
-	int tidno, acno;
-
-	buf = kzalloc(size, GFP_KERNEL);
-	if (buf == NULL)
-		return -ENOMEM;
-
-	if (!an->sta->ht_cap.ht_supported) {
-		len = scnprintf(buf, size, "%s\n",
-				"HT not supported");
-		goto exit;
-	}
-
-	len = scnprintf(buf, size, "Max-AMPDU: %d\n",
-			an->maxampdu);
-	len += scnprintf(buf + len, size - len, "MPDU Density: %d\n\n",
-			 an->mpdudensity);
-
-	len += scnprintf(buf + len, size - len,
-			 "%2s%7s\n", "AC", "SCHED");
-
-	for (acno = 0, ac = &an->ac[acno];
-	     acno < IEEE80211_NUM_ACS; acno++, ac++) {
-		txq = ac->txq;
-		ath_txq_lock(sc, txq);
-		len += scnprintf(buf + len, size - len,
-				 "%2d%7d\n",
-				 acno, ac->sched);
-		ath_txq_unlock(sc, txq);
-	}
-
-	len += scnprintf(buf + len, size - len,
-			 "\n%3s%11s%10s%10s%10s%10s%9s%6s%8s\n",
-			 "TID", "SEQ_START", "SEQ_NEXT", "BAW_SIZE",
-			 "BAW_HEAD", "BAW_TAIL", "BAR_IDX", "SCHED", "PAUSED");
-
-	for (tidno = 0, tid = &an->tid[tidno];
-	     tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
-		txq = tid->ac->txq;
-		ath_txq_lock(sc, txq);
-		len += scnprintf(buf + len, size - len,
-				 "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n",
-				 tid->tidno, tid->seq_start, tid->seq_next,
-				 tid->baw_size, tid->baw_head, tid->baw_tail,
-				 tid->bar_index, tid->sched, tid->paused);
-		ath_txq_unlock(sc, txq);
-	}
-exit:
-	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
-	kfree(buf);
-
-	return retval;
-}
-
-static const struct file_operations fops_node_stat = {
-	.read = read_file_node_stat,
-	.open = simple_open,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
-};
-
-void ath9k_sta_add_debugfs(struct ieee80211_hw *hw,
-			   struct ieee80211_vif *vif,
-			   struct ieee80211_sta *sta,
-			   struct dentry *dir)
-{
-	struct ath_node *an = (struct ath_node *)sta->drv_priv;
-	debugfs_create_file("node_stat", S_IRUGO, dir, an, &fops_node_stat);
-}
-
 /* Ethtool support for get-stats */
 
 #define AMKSTR(nm) #nm "_BE", #nm "_BK", #nm "_VI", #nm "_VO"
diff --git a/drivers/net/wireless/ath/ath9k/debug_sta.c b/drivers/net/wireless/ath/ath9k/debug_sta.c
new file mode 100644
index 000000000000..3fe2bab2c4f5
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/debug_sta.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static ssize_t read_file_node_aggr(struct file *file, char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct ath_node *an = file->private_data;
+	struct ath_softc *sc = an->sc;
+	struct ath_atx_tid *tid;
+	struct ath_atx_ac *ac;
+	struct ath_txq *txq;
+	u32 len = 0, size = 4096;
+	char *buf;
+	size_t retval;
+	int tidno, acno;
+
+	buf = kzalloc(size, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	if (!an->sta->ht_cap.ht_supported) {
+		len = scnprintf(buf, size, "%s\n",
+				"HT not supported");
+		goto exit;
+	}
+
+	len = scnprintf(buf, size, "Max-AMPDU: %d\n",
+			an->maxampdu);
+	len += scnprintf(buf + len, size - len, "MPDU Density: %d\n\n",
+			 an->mpdudensity);
+
+	len += scnprintf(buf + len, size - len,
+			 "%2s%7s\n", "AC", "SCHED");
+
+	for (acno = 0, ac = &an->ac[acno];
+	     acno < IEEE80211_NUM_ACS; acno++, ac++) {
+		txq = ac->txq;
+		ath_txq_lock(sc, txq);
+		len += scnprintf(buf + len, size - len,
+				 "%2d%7d\n",
+				 acno, ac->sched);
+		ath_txq_unlock(sc, txq);
+	}
+
+	len += scnprintf(buf + len, size - len,
+			 "\n%3s%11s%10s%10s%10s%10s%9s%6s%8s\n",
+			 "TID", "SEQ_START", "SEQ_NEXT", "BAW_SIZE",
+			 "BAW_HEAD", "BAW_TAIL", "BAR_IDX", "SCHED", "PAUSED");
+
+	for (tidno = 0, tid = &an->tid[tidno];
+	     tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
+		txq = tid->ac->txq;
+		ath_txq_lock(sc, txq);
+		len += scnprintf(buf + len, size - len,
+				 "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n",
+				 tid->tidno, tid->seq_start, tid->seq_next,
+				 tid->baw_size, tid->baw_head, tid->baw_tail,
+				 tid->bar_index, tid->sched, tid->paused);
+		ath_txq_unlock(sc, txq);
+	}
+exit:
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+
+	return retval;
+}
+
+static const struct file_operations fops_node_aggr = {
+	.read = read_file_node_aggr,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+void ath9k_sta_add_debugfs(struct ieee80211_hw *hw,
+			   struct ieee80211_vif *vif,
+			   struct ieee80211_sta *sta,
+			   struct dentry *dir)
+{
+	struct ath_node *an = (struct ath_node *)sta->drv_priv;
+	debugfs_create_file("node_aggr", S_IRUGO, dir, an, &fops_node_aggr);
+}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index d0c3aec7c74e..07fcf1609726 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2111,7 +2111,7 @@ struct ieee80211_ops ath9k_ops = {
 	.get_et_strings     = ath9k_get_et_strings,
 #endif
 
-#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS)
+#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_STATION_STATISTICS)
 	.sta_add_debugfs    = ath9k_sta_add_debugfs,
 #endif
 	.sw_scan_start	    = ath9k_sw_scan_start,
-- 
cgit v1.2.3


From 78175fc45da3066337fcacbff562097bfda2ce7e Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 13 Jan 2014 07:29:28 +0530
Subject: ath9k: Show only active TIDs in node_aggr

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug_sta.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/debug_sta.c b/drivers/net/wireless/ath/ath9k/debug_sta.c
index 3fe2bab2c4f5..3d119689d08a 100644
--- a/drivers/net/wireless/ath/ath9k/debug_sta.c
+++ b/drivers/net/wireless/ath/ath9k/debug_sta.c
@@ -66,11 +66,19 @@ static ssize_t read_file_node_aggr(struct file *file, char __user *user_buf,
 	     tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
 		txq = tid->ac->txq;
 		ath_txq_lock(sc, txq);
-		len += scnprintf(buf + len, size - len,
-				 "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n",
-				 tid->tidno, tid->seq_start, tid->seq_next,
-				 tid->baw_size, tid->baw_head, tid->baw_tail,
-				 tid->bar_index, tid->sched, tid->paused);
+		if (tid->active) {
+			len += scnprintf(buf + len, size - len,
+					 "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n",
+					 tid->tidno,
+					 tid->seq_start,
+					 tid->seq_next,
+					 tid->baw_size,
+					 tid->baw_head,
+					 tid->baw_tail,
+					 tid->bar_index,
+					 tid->sched,
+					 tid->paused);
+		}
 		ath_txq_unlock(sc, txq);
 	}
 exit:
-- 
cgit v1.2.3


From c3b9f9e86b178fd3e94e2d6dd6da84ab38fa2ba7 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 13 Jan 2014 07:29:29 +0530
Subject: ath9k: Use a separate debugfs file for PHY errors

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug.c | 117 +++++++++++++++++++++------------
 1 file changed, 74 insertions(+), 43 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 5bdc938ec5ed..ab7264c1d8f7 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -943,14 +943,10 @@ static const struct file_operations fops_reset = {
 static ssize_t read_file_recv(struct file *file, char __user *user_buf,
 			      size_t count, loff_t *ppos)
 {
-#define PHY_ERR(s, p) \
-	len += scnprintf(buf + len, size - len, "%22s : %10u\n", s, \
-			 sc->debug.stats.rxstats.phy_err_stats[p]);
-
 #define RXS_ERR(s, e)					    \
 	do {						    \
 		len += scnprintf(buf + len, size - len,	    \
-				 "%22s : %10u\n", s,	    \
+				 "%18s : %10u\n", s,	    \
 				 sc->debug.stats.rxstats.e);\
 	} while (0)
 
@@ -963,6 +959,12 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf,
 	if (buf == NULL)
 		return -ENOMEM;
 
+	RXS_ERR("PKTS-ALL", rx_pkts_all);
+	RXS_ERR("BYTES-ALL", rx_bytes_all);
+	RXS_ERR("BEACONS", rx_beacons);
+	RXS_ERR("FRAGS", rx_frags);
+	RXS_ERR("SPECTRAL", rx_spectral);
+
 	RXS_ERR("CRC ERR", crc_err);
 	RXS_ERR("DECRYPT CRC ERR", decrypt_crc_err);
 	RXS_ERR("PHY ERR", phy_err);
@@ -970,43 +972,10 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf,
 	RXS_ERR("PRE-DELIM CRC ERR", pre_delim_crc_err);
 	RXS_ERR("POST-DELIM CRC ERR", post_delim_crc_err);
 	RXS_ERR("DECRYPT BUSY ERR", decrypt_busy_err);
-	RXS_ERR("RX-LENGTH-ERR", rx_len_err);
-	RXS_ERR("RX-OOM-ERR", rx_oom_err);
-	RXS_ERR("RX-RATE-ERR", rx_rate_err);
-	RXS_ERR("RX-TOO-MANY-FRAGS", rx_too_many_frags_err);
-
-	PHY_ERR("UNDERRUN ERR", ATH9K_PHYERR_UNDERRUN);
-	PHY_ERR("TIMING ERR", ATH9K_PHYERR_TIMING);
-	PHY_ERR("PARITY ERR", ATH9K_PHYERR_PARITY);
-	PHY_ERR("RATE ERR", ATH9K_PHYERR_RATE);
-	PHY_ERR("LENGTH ERR", ATH9K_PHYERR_LENGTH);
-	PHY_ERR("RADAR ERR", ATH9K_PHYERR_RADAR);
-	PHY_ERR("SERVICE ERR", ATH9K_PHYERR_SERVICE);
-	PHY_ERR("TOR ERR", ATH9K_PHYERR_TOR);
-	PHY_ERR("OFDM-TIMING ERR", ATH9K_PHYERR_OFDM_TIMING);
-	PHY_ERR("OFDM-SIGNAL-PARITY ERR", ATH9K_PHYERR_OFDM_SIGNAL_PARITY);
-	PHY_ERR("OFDM-RATE ERR", ATH9K_PHYERR_OFDM_RATE_ILLEGAL);
-	PHY_ERR("OFDM-LENGTH ERR", ATH9K_PHYERR_OFDM_LENGTH_ILLEGAL);
-	PHY_ERR("OFDM-POWER-DROP ERR", ATH9K_PHYERR_OFDM_POWER_DROP);
-	PHY_ERR("OFDM-SERVICE ERR", ATH9K_PHYERR_OFDM_SERVICE);
-	PHY_ERR("OFDM-RESTART ERR", ATH9K_PHYERR_OFDM_RESTART);
-	PHY_ERR("FALSE-RADAR-EXT ERR", ATH9K_PHYERR_FALSE_RADAR_EXT);
-	PHY_ERR("CCK-TIMING ERR", ATH9K_PHYERR_CCK_TIMING);
-	PHY_ERR("CCK-HEADER-CRC ERR", ATH9K_PHYERR_CCK_HEADER_CRC);
-	PHY_ERR("CCK-RATE ERR", ATH9K_PHYERR_CCK_RATE_ILLEGAL);
-	PHY_ERR("CCK-SERVICE ERR", ATH9K_PHYERR_CCK_SERVICE);
-	PHY_ERR("CCK-RESTART ERR", ATH9K_PHYERR_CCK_RESTART);
-	PHY_ERR("CCK-LENGTH ERR", ATH9K_PHYERR_CCK_LENGTH_ILLEGAL);
-	PHY_ERR("CCK-POWER-DROP ERR", ATH9K_PHYERR_CCK_POWER_DROP);
-	PHY_ERR("HT-CRC ERR", ATH9K_PHYERR_HT_CRC_ERROR);
-	PHY_ERR("HT-LENGTH ERR", ATH9K_PHYERR_HT_LENGTH_ILLEGAL);
-	PHY_ERR("HT-RATE ERR", ATH9K_PHYERR_HT_RATE_ILLEGAL);
-
-	RXS_ERR("RX-Pkts-All", rx_pkts_all);
-	RXS_ERR("RX-Bytes-All", rx_bytes_all);
-	RXS_ERR("RX-Beacons", rx_beacons);
-	RXS_ERR("RX-Frags", rx_frags);
-	RXS_ERR("RX-Spectral", rx_spectral);
+	RXS_ERR("LENGTH-ERR", rx_len_err);
+	RXS_ERR("OOM-ERR", rx_oom_err);
+	RXS_ERR("RATE-ERR", rx_rate_err);
+	RXS_ERR("TOO-MANY-FRAGS", rx_too_many_frags_err);
 
 	if (len > size)
 		len = size;
@@ -1017,7 +986,6 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf,
 	return retval;
 
 #undef RXS_ERR
-#undef PHY_ERR
 }
 
 void ath_debug_stat_rx(struct ath_softc *sc, struct ath_rx_status *rs)
@@ -1056,6 +1024,67 @@ static const struct file_operations fops_recv = {
 	.llseek = default_llseek,
 };
 
+static ssize_t read_file_phy_err(struct file *file, char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+#define PHY_ERR(s, p) \
+	len += scnprintf(buf + len, size - len, "%22s : %10u\n", s, \
+			 sc->debug.stats.rxstats.phy_err_stats[p]);
+
+	struct ath_softc *sc = file->private_data;
+	char *buf;
+	unsigned int len = 0, size = 1600;
+	ssize_t retval = 0;
+
+	buf = kzalloc(size, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	PHY_ERR("UNDERRUN ERR", ATH9K_PHYERR_UNDERRUN);
+	PHY_ERR("TIMING ERR", ATH9K_PHYERR_TIMING);
+	PHY_ERR("PARITY ERR", ATH9K_PHYERR_PARITY);
+	PHY_ERR("RATE ERR", ATH9K_PHYERR_RATE);
+	PHY_ERR("LENGTH ERR", ATH9K_PHYERR_LENGTH);
+	PHY_ERR("RADAR ERR", ATH9K_PHYERR_RADAR);
+	PHY_ERR("SERVICE ERR", ATH9K_PHYERR_SERVICE);
+	PHY_ERR("TOR ERR", ATH9K_PHYERR_TOR);
+	PHY_ERR("OFDM-TIMING ERR", ATH9K_PHYERR_OFDM_TIMING);
+	PHY_ERR("OFDM-SIGNAL-PARITY ERR", ATH9K_PHYERR_OFDM_SIGNAL_PARITY);
+	PHY_ERR("OFDM-RATE ERR", ATH9K_PHYERR_OFDM_RATE_ILLEGAL);
+	PHY_ERR("OFDM-LENGTH ERR", ATH9K_PHYERR_OFDM_LENGTH_ILLEGAL);
+	PHY_ERR("OFDM-POWER-DROP ERR", ATH9K_PHYERR_OFDM_POWER_DROP);
+	PHY_ERR("OFDM-SERVICE ERR", ATH9K_PHYERR_OFDM_SERVICE);
+	PHY_ERR("OFDM-RESTART ERR", ATH9K_PHYERR_OFDM_RESTART);
+	PHY_ERR("FALSE-RADAR-EXT ERR", ATH9K_PHYERR_FALSE_RADAR_EXT);
+	PHY_ERR("CCK-TIMING ERR", ATH9K_PHYERR_CCK_TIMING);
+	PHY_ERR("CCK-HEADER-CRC ERR", ATH9K_PHYERR_CCK_HEADER_CRC);
+	PHY_ERR("CCK-RATE ERR", ATH9K_PHYERR_CCK_RATE_ILLEGAL);
+	PHY_ERR("CCK-SERVICE ERR", ATH9K_PHYERR_CCK_SERVICE);
+	PHY_ERR("CCK-RESTART ERR", ATH9K_PHYERR_CCK_RESTART);
+	PHY_ERR("CCK-LENGTH ERR", ATH9K_PHYERR_CCK_LENGTH_ILLEGAL);
+	PHY_ERR("CCK-POWER-DROP ERR", ATH9K_PHYERR_CCK_POWER_DROP);
+	PHY_ERR("HT-CRC ERR", ATH9K_PHYERR_HT_CRC_ERROR);
+	PHY_ERR("HT-LENGTH ERR", ATH9K_PHYERR_HT_LENGTH_ILLEGAL);
+	PHY_ERR("HT-RATE ERR", ATH9K_PHYERR_HT_RATE_ILLEGAL);
+
+	if (len > size)
+		len = size;
+
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+
+	return retval;
+
+#undef PHY_ERR
+}
+
+static const struct file_operations fops_phy_err = {
+	.read = read_file_phy_err,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 static ssize_t read_file_regidx(struct file *file, char __user *user_buf,
                                 size_t count, loff_t *ppos)
 {
@@ -1489,6 +1518,8 @@ int ath9k_init_debug(struct ath_hw *ah)
 			    &fops_reset);
 	debugfs_create_file("recv", S_IRUSR, sc->debug.debugfs_phy, sc,
 			    &fops_recv);
+	debugfs_create_file("phy_err", S_IRUSR, sc->debug.debugfs_phy, sc,
+			    &fops_phy_err);
 	debugfs_create_u8("rx_chainmask", S_IRUSR, sc->debug.debugfs_phy,
 			  &ah->rxchainmask);
 	debugfs_create_u8("tx_chainmask", S_IRUSR, sc->debug.debugfs_phy,
-- 
cgit v1.2.3


From 350e2dcb4647d144000db1505c94d586fcd57919 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 13 Jan 2014 07:29:30 +0530
Subject: ath9k: Add a debugfs file "node_recv"

This would be useful when debugging RX performance issues.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h     |   8 +-
 drivers/net/wireless/ath/ath9k/debug.h     |  34 +++++-
 drivers/net/wireless/ath/ath9k/debug_sta.c | 164 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/recv.c      |   2 +-
 drivers/net/wireless/ath/ath9k/xmit.c      |   2 -
 5 files changed, 203 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index f622a986c8cc..cba7d772f7f3 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -146,7 +146,9 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 
 #define ATH_AN_2_TID(_an, _tidno)  (&(_an)->tid[(_tidno)])
 
-#define IS_CCK_RATE(rate) ((rate >= 0x18) && (rate <= 0x1e))
+#define IS_HT_RATE(rate)   (rate & 0x80)
+#define IS_CCK_RATE(rate)  ((rate >= 0x18) && (rate <= 0x1e))
+#define IS_OFDM_RATE(rate) ((rate >= 0x8) && (rate <= 0xf))
 
 struct ath_txq {
 	int mac80211_qnum; /* mac80211 queue number, -1 means not mac80211 Q */
@@ -262,6 +264,10 @@ struct ath_node {
 
 	bool sleeping;
 	bool no_ps_filter;
+
+#ifdef CONFIG_ATH9K_STATION_STATISTICS
+	struct ath_rx_rate_stats rx_rate_stats;
+#endif
 };
 
 struct ath_tx_control {
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index ec02d38ea8ea..b01b8c3ec570 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -27,11 +27,13 @@ struct fft_sample_tlv;
 
 #ifdef CONFIG_ATH9K_DEBUGFS
 #define TX_STAT_INC(q, c) sc->debug.stats.txstats[q].c++
+#define RX_STAT_INC(c) (sc->debug.stats.rxstats.c++)
 #define RESET_STAT_INC(sc, type) sc->debug.stats.reset[type]++
 #define ANT_STAT_INC(i, c) sc->debug.stats.ant_stats[i].c++
 #define ANT_LNA_INC(i, c) sc->debug.stats.ant_stats[i].lna_recv_cnt[c]++;
 #else
 #define TX_STAT_INC(q, c) do { } while (0)
+#define RX_STAT_INC(c)
 #define RESET_STAT_INC(sc, type) do { } while (0)
 #define ANT_STAT_INC(i, c) do { } while (0)
 #define ANT_LNA_INC(i, c) do { } while (0)
@@ -201,7 +203,23 @@ struct ath_tx_stats {
 				 TXSTATS[PR_QNUM(IEEE80211_AC_VO)].elem); \
 	} while(0)
 
-#define RX_STAT_INC(c) (sc->debug.stats.rxstats.c++)
+struct ath_rx_rate_stats {
+	struct {
+		u32 ht20_cnt;
+		u32 ht40_cnt;
+		u32 sgi_cnt;
+		u32 lgi_cnt;
+	} ht_stats[24];
+
+	struct {
+		u32 ofdm_cnt;
+	} ofdm_stats[8];
+
+	struct {
+		u32 cck_lp_cnt;
+		u32 cck_sp_cnt;
+	} cck_stats[4];
+};
 
 /**
  * struct ath_rx_stats - RX Statistics
@@ -299,8 +317,6 @@ void ath9k_debug_sync_cause(struct ath_softc *sc, u32 sync_cause);
 
 #else
 
-#define RX_STAT_INC(c) /* NOP */
-
 static inline int ath9k_init_debug(struct ath_hw *ah)
 {
 	return 0;
@@ -338,4 +354,16 @@ ath9k_debug_sync_cause(struct ath_softc *sc, u32 sync_cause)
 
 #endif /* CONFIG_ATH9K_DEBUGFS */
 
+#ifdef CONFIG_ATH9K_STATION_STATISTICS
+void ath_debug_rate_stats(struct ath_softc *sc,
+			  struct ath_rx_status *rs,
+			  struct sk_buff *skb);
+#else
+static inline void ath_debug_rate_stats(struct ath_softc *sc,
+					struct ath_rx_status *rs,
+					struct sk_buff *skb)
+{
+}
+#endif /* CONFIG_ATH9K_STATION_STATISTICS */
+
 #endif /* DEBUG_H */
diff --git a/drivers/net/wireless/ath/ath9k/debug_sta.c b/drivers/net/wireless/ath/ath9k/debug_sta.c
index 3d119689d08a..d33cc88a5849 100644
--- a/drivers/net/wireless/ath/ath9k/debug_sta.c
+++ b/drivers/net/wireless/ath/ath9k/debug_sta.c
@@ -16,6 +16,10 @@
 
 #include "ath9k.h"
 
+/*************/
+/* node_aggr */
+/*************/
+
 static ssize_t read_file_node_aggr(struct file *file, char __user *user_buf,
 				   size_t count, loff_t *ppos)
 {
@@ -95,11 +99,171 @@ static const struct file_operations fops_node_aggr = {
 	.llseek = default_llseek,
 };
 
+/*************/
+/* node_recv */
+/*************/
+
+void ath_debug_rate_stats(struct ath_softc *sc,
+			  struct ath_rx_status *rs,
+			  struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ieee80211_rx_status *rxs;
+	struct ath_rx_rate_stats *rstats;
+	struct ieee80211_sta *sta;
+	struct ath_node *an;
+
+	if (!ieee80211_is_data(hdr->frame_control))
+		return;
+
+	rcu_read_lock();
+
+	sta = ieee80211_find_sta_by_ifaddr(sc->hw, hdr->addr2, NULL);
+	if (!sta)
+		goto exit;
+
+	an = (struct ath_node *) sta->drv_priv;
+	rstats = &an->rx_rate_stats;
+	rxs = IEEE80211_SKB_RXCB(skb);
+
+	if (IS_HT_RATE(rs->rs_rate)) {
+		if (rxs->rate_idx > ARRAY_SIZE(rstats->ht_stats))
+			goto exit;
+
+		if (rxs->flag & RX_FLAG_40MHZ)
+			rstats->ht_stats[rxs->rate_idx].ht40_cnt++;
+		else
+			rstats->ht_stats[rxs->rate_idx].ht20_cnt++;
+
+		if (rxs->flag & RX_FLAG_SHORT_GI)
+			rstats->ht_stats[rxs->rate_idx].sgi_cnt++;
+		else
+			rstats->ht_stats[rxs->rate_idx].lgi_cnt++;
+
+		goto exit;
+	}
+
+	if (IS_CCK_RATE(rs->rs_rate)) {
+		if (rxs->flag & RX_FLAG_SHORTPRE)
+			rstats->cck_stats[rxs->rate_idx].cck_sp_cnt++;
+		else
+			rstats->cck_stats[rxs->rate_idx].cck_lp_cnt++;
+
+		goto exit;
+	}
+
+	if (IS_OFDM_RATE(rs->rs_rate)) {
+		if (ah->curchan->chan->band == IEEE80211_BAND_2GHZ)
+			rstats->ofdm_stats[rxs->rate_idx - 4].ofdm_cnt++;
+		else
+			rstats->ofdm_stats[rxs->rate_idx].ofdm_cnt++;
+	}
+exit:
+	rcu_read_unlock();
+}
+
+#define PRINT_CCK_RATE(str, i, sp)					\
+	do {								\
+		len += scnprintf(buf + len, size - len,			\
+			 "%11s : %10u\n",				\
+			 str,						\
+			 (sp) ? rstats->cck_stats[i].cck_sp_cnt :	\
+			 rstats->cck_stats[i].cck_lp_cnt);		\
+	} while (0)
+
+#define PRINT_OFDM_RATE(str, i)					\
+	do {							\
+		len += scnprintf(buf + len, size - len,		\
+			 "%11s : %10u\n",			\
+			 str,					\
+			 rstats->ofdm_stats[i].ofdm_cnt);	\
+	} while (0)
+
+static ssize_t read_file_node_recv(struct file *file, char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct ath_node *an = file->private_data;
+	struct ath_softc *sc = an->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_rx_rate_stats *rstats;
+	struct ieee80211_sta *sta = an->sta;
+	enum ieee80211_band band;
+	u32 len = 0, size = 4096;
+	char *buf;
+	size_t retval;
+	int i;
+
+	buf = kzalloc(size, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	band = ah->curchan->chan->band;
+	rstats = &an->rx_rate_stats;
+
+	if (!sta->ht_cap.ht_supported)
+		goto legacy;
+
+	len += scnprintf(buf + len, size - len,
+			 "%24s%10s%10s%10s\n",
+			 "HT20", "HT40", "SGI", "LGI");
+
+	for (i = 0; i < 24; i++) {
+		len += scnprintf(buf + len, size - len,
+				 "%8s%3u : %10u%10u%10u%10u\n",
+				 "MCS", i,
+				 rstats->ht_stats[i].ht20_cnt,
+				 rstats->ht_stats[i].ht40_cnt,
+				 rstats->ht_stats[i].sgi_cnt,
+				 rstats->ht_stats[i].lgi_cnt);
+	}
+
+	len += scnprintf(buf + len, size - len, "\n");
+
+legacy:
+	if (band == IEEE80211_BAND_2GHZ) {
+		PRINT_CCK_RATE("CCK-1M/LP", 0, false);
+		PRINT_CCK_RATE("CCK-2M/LP", 1, false);
+		PRINT_CCK_RATE("CCK-5.5M/LP", 2, false);
+		PRINT_CCK_RATE("CCK-11M/LP", 3, false);
+
+		PRINT_CCK_RATE("CCK-2M/SP", 1, true);
+		PRINT_CCK_RATE("CCK-5.5M/SP", 2, true);
+		PRINT_CCK_RATE("CCK-11M/SP", 3, true);
+	}
+
+	PRINT_OFDM_RATE("OFDM-6M", 0);
+	PRINT_OFDM_RATE("OFDM-9M", 1);
+	PRINT_OFDM_RATE("OFDM-12M", 2);
+	PRINT_OFDM_RATE("OFDM-18M", 3);
+	PRINT_OFDM_RATE("OFDM-24M", 4);
+	PRINT_OFDM_RATE("OFDM-36M", 5);
+	PRINT_OFDM_RATE("OFDM-48M", 6);
+	PRINT_OFDM_RATE("OFDM-54M", 7);
+
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+
+	return retval;
+}
+
+#undef PRINT_OFDM_RATE
+#undef PRINT_CCK_RATE
+
+static const struct file_operations fops_node_recv = {
+	.read = read_file_node_recv,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 void ath9k_sta_add_debugfs(struct ieee80211_hw *hw,
 			   struct ieee80211_vif *vif,
 			   struct ieee80211_sta *sta,
 			   struct dentry *dir)
 {
 	struct ath_node *an = (struct ath_node *)sta->drv_priv;
+
 	debugfs_create_file("node_aggr", S_IRUGO, dir, an, &fops_node_aggr);
+	debugfs_create_file("node_recv", S_IRUGO, dir, an, &fops_node_recv);
 }
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index f7cc5b37a18f..5bf3243dce0f 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1354,8 +1354,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 		spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 
 		ath9k_antenna_check(sc, &rs);
-
 		ath9k_apply_ampdu_details(sc, &rs, rxs);
+		ath_debug_rate_stats(sc, &rs, skb);
 
 		ieee80211_rx(hw, skb);
 
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index e8d0e7fc77da..0a75e2f68c9d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -47,8 +47,6 @@ static u16 bits_per_symbol[][2] = {
 	{   260,  540 },     /*  7: 64-QAM 5/6 */
 };
 
-#define IS_HT_RATE(_rate)     ((_rate) & 0x80)
-
 static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
 			       struct ath_atx_tid *tid, struct sk_buff *skb);
 static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
-- 
cgit v1.2.3


From 9d89cadd39f78eb4dd70d522dc3fd17b3c41de58 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 13 Jan 2014 07:40:56 +0530
Subject: ath9k: Remove debug print in ISR

There is no need to do this and we can avoid
an unused variable warning when CONFIG_ATH9K_WOW is
not selected.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 07fcf1609726..ca8aff1aec94 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -542,7 +542,6 @@ irqreturn_t ath_isr(int irq, void *dev)
 
 	struct ath_softc *sc = dev;
 	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
 	enum ath9k_int status;
 	u32 sync_cause = 0;
 	bool sched = false;
@@ -603,7 +602,6 @@ irqreturn_t ath_isr(int irq, void *dev)
 #ifdef CONFIG_ATH9K_WOW
 	if (status & ATH9K_INT_BMISS) {
 		if (atomic_read(&sc->wow_sleep_proc_intr) == 0) {
-			ath_dbg(common, ANY, "during WoW we got a BMISS\n");
 			atomic_inc(&sc->wow_got_bmiss_intr);
 			atomic_dec(&sc->wow_sleep_proc_intr);
 		}
-- 
cgit v1.2.3


From 071aa9a8b2e724679ac2cf14f31b781a3783c377 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 13 Jan 2014 13:55:11 +0530
Subject: ath9k: Process GTT interrupts

Global Transmission Timeout interrupts are generated by
the HW when transmission of a frame fails - this is done
based on the threshold programmed in the AR_GTXTO register.

Currently, even though the interrupt is enabled for all chips,
it is not handled in the driver. This patch handles GTT events
for AR9003 and above chips, checking if the MAC/BB has hung
after successive GTT interrupts crosses a threshold (5).

This can be enabled for the older chips in the AR9002 family once
appropriate HW hang checks are implemented for them.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  2 ++
 drivers/net/wireless/ath/ath9k/debug.h |  1 +
 drivers/net/wireless/ath/ath9k/main.c  | 36 ++++++++++++++++++++++++++++++----
 3 files changed, 35 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index cba7d772f7f3..b5ac32cfbeb8 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -691,6 +691,7 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs);
 #define DEFAULT_CACHELINE       32
 #define ATH_CABQ_READY_TIME     80      /* % of beacon interval */
 #define ATH_TXPOWER_MAX         100     /* .5 dBm units */
+#define MAX_GTT_CNT             5
 
 enum sc_op_flags {
 	SC_OP_INVALID,
@@ -733,6 +734,7 @@ struct ath_softc {
 	unsigned long sc_flags;
 	unsigned long driver_data;
 
+	u8 gtt_cnt;
 	u32 intrstatus;
 	u16 ps_flags; /* PS_* */
 	u16 curtxpow;
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index b01b8c3ec570..cc7a025d833e 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -44,6 +44,7 @@ enum ath_reset_type {
 	RESET_TYPE_BB_WATCHDOG,
 	RESET_TYPE_FATAL_INT,
 	RESET_TYPE_TX_ERROR,
+	RESET_TYPE_TX_GTT,
 	RESET_TYPE_TX_HANG,
 	RESET_TYPE_PLL_HANG,
 	RESET_TYPE_MAC_HANG,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index ca8aff1aec94..73a36551a5ed 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -258,6 +258,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start)
 		}
 	}
 
+	sc->gtt_cnt = 0;
 	ieee80211_wake_queues(sc->hw);
 
 	return true;
@@ -476,6 +477,19 @@ void ath9k_tasklet(unsigned long data)
 		}
 	}
 
+	if (status & ATH9K_INT_GTT) {
+		sc->gtt_cnt++;
+
+		if ((sc->gtt_cnt >= MAX_GTT_CNT) && !ath9k_hw_check_alive(ah)) {
+			type = RESET_TYPE_TX_GTT;
+			ath9k_queue_reset(sc, type);
+			atomic_inc(&ah->intr_ref_cnt);
+			ath_dbg(common, ANY,
+				"GTT: Skipping interrupts\n");
+			goto out;
+		}
+	}
+
 	spin_lock_irqsave(&sc->sc_pm_lock, flags);
 	if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
 		/*
@@ -503,10 +517,19 @@ void ath9k_tasklet(unsigned long data)
 	}
 
 	if (status & ATH9K_INT_TX) {
-		if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
+		if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
+			/*
+			 * For EDMA chips, TX completion is enabled for the
+			 * beacon queue, so if a beacon has been transmitted
+			 * successfully after a GTT interrupt, the GTT counter
+			 * gets reset to zero here.
+			 */
+			/* sc->gtt_cnt = 0; */
+
 			ath_tx_edma_tasklet(sc);
-		else
+		} else {
 			ath_tx_tasklet(sc);
+		}
 
 		wake_up(&sc->tx_wait);
 	}
@@ -536,6 +559,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 		ATH9K_INT_TX |			\
 		ATH9K_INT_BMISS |		\
 		ATH9K_INT_CST |			\
+		ATH9K_INT_GTT |			\
 		ATH9K_INT_TSFOOR |		\
 		ATH9K_INT_GENTIMER |		\
 		ATH9K_INT_MCI)
@@ -608,7 +632,6 @@ irqreturn_t ath_isr(int irq, void *dev)
 	}
 #endif
 
-
 	if (status & ATH9K_INT_SWBA)
 		tasklet_schedule(&sc->bcon_tasklet);
 
@@ -733,7 +756,12 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	if (ah->config.hw_hang_checks & HW_BB_WATCHDOG)
 		ah->imask |= ATH9K_INT_BB_WATCHDOG;
 
-	ah->imask |= ATH9K_INT_GTT;
+	/*
+	 * Enable GTT interrupts only for AR9003/AR9004 chips
+	 * for now.
+	 */
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		ah->imask |= ATH9K_INT_GTT;
 
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
 		ah->imask |= ATH9K_INT_CST;
-- 
cgit v1.2.3


From 1908861f2fb072446eabbdc4a01c3bec40ed2f7c Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 14 Jan 2014 09:22:36 +0530
Subject: ath9k: Fix error reported by smatch

debug_sta.c: ath_debug_rate_stats() error: buffer overflow 'rstats->ht_stats' 24 <= 24

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug_sta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/debug_sta.c b/drivers/net/wireless/ath/ath9k/debug_sta.c
index d33cc88a5849..d76e6e0120d2 100644
--- a/drivers/net/wireless/ath/ath9k/debug_sta.c
+++ b/drivers/net/wireless/ath/ath9k/debug_sta.c
@@ -128,7 +128,7 @@ void ath_debug_rate_stats(struct ath_softc *sc,
 	rxs = IEEE80211_SKB_RXCB(skb);
 
 	if (IS_HT_RATE(rs->rs_rate)) {
-		if (rxs->rate_idx > ARRAY_SIZE(rstats->ht_stats))
+		if (rxs->rate_idx >= ARRAY_SIZE(rstats->ht_stats))
 			goto exit;
 
 		if (rxs->flag & RX_FLAG_40MHZ)
-- 
cgit v1.2.3


From 522aaa182a8d942d29e37e1f80b3f5b3c68cc475 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 14 Jan 2014 13:25:17 +0530
Subject: ath9k: Fix IQ calibration

This patch fixes a bug in the TX IQ calibration post
processing routine because of which the driver disables
TX IQ correction even though the calibration results
are valid. This fix is applicable for all chips in the
AR9003 family.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 8c145cd98c1c..4eb35aa64f35 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -655,8 +655,8 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	if (i2_m_q2_a0_d1 > 0x800)
 		i2_m_q2_a0_d1 = -((0xfff - i2_m_q2_a0_d1) + 1);
 
-	if (i2_p_q2_a0_d1 > 0x800)
-		i2_p_q2_a0_d1 = -((0xfff - i2_p_q2_a0_d1) + 1);
+	if (i2_p_q2_a0_d1 > 0x1000)
+		i2_p_q2_a0_d1 = -((0x1fff - i2_p_q2_a0_d1) + 1);
 
 	if (iq_corr_a0_d1 > 0x800)
 		iq_corr_a0_d1 = -((0xfff - iq_corr_a0_d1) + 1);
@@ -700,6 +700,19 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 		return false;
 	}
 
+	if ((i2_p_q2_a0_d0 < 1024) || (i2_p_q2_a0_d0 > 2047) ||
+            (i2_p_q2_a1_d0 < 0) || (i2_p_q2_a1_d1 < 0) ||
+            (i2_p_q2_a0_d0 <= i2_m_q2_a0_d0) ||
+            (i2_p_q2_a0_d0 <= iq_corr_a0_d0) ||
+            (i2_p_q2_a0_d1 <= i2_m_q2_a0_d1) ||
+            (i2_p_q2_a0_d1 <= iq_corr_a0_d1) ||
+            (i2_p_q2_a1_d0 <= i2_m_q2_a1_d0) ||
+            (i2_p_q2_a1_d0 <= iq_corr_a1_d0) ||
+            (i2_p_q2_a1_d1 <= i2_m_q2_a1_d1) ||
+            (i2_p_q2_a1_d1 <= iq_corr_a1_d1)) {
+		return false;
+	}
+
 	mag_a0_d0 = (i2_m_q2_a0_d0 * res_scale) / i2_p_q2_a0_d0;
 	phs_a0_d0 = (iq_corr_a0_d0 * res_scale) / i2_p_q2_a0_d0;
 
-- 
cgit v1.2.3


From 3b24e9f8c07fc09174e4f2fe4d0f716595ae2146 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 14 Jan 2014 13:41:17 +0530
Subject: ath9k: Fix possible overflow condition

Prevent a possible overflow condition which results in occasional
bad IQ coefficients and EVM numbers.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 4eb35aa64f35..a352128c40ad 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -565,7 +565,7 @@ static bool ar9003_hw_solve_iq_cal(struct ath_hw *ah,
 	const s32 result_shift = 1 << 15;
 	struct ath_common *common = ath9k_hw_common(ah);
 
-	f2 = (f1 * f1 + f3 * f3) / result_shift;
+	f2 = ((f1 >> 3) * (f1 >> 3) + (f3 >> 3) * (f3 >> 3)) >> 9;
 
 	if (!f2) {
 		ath_dbg(common, CALIBRATE, "Divide by 0\n");
-- 
cgit v1.2.3


From 0786dc4edd2d89053d6366c4fbc6b458ee2e9b5e Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Tue, 14 Jan 2014 20:31:26 +0200
Subject: wil6210: correct #include for prefetch()

This fixes bug found by the kbuild test robot:

tree:   git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master
head:   1e2f9295f4c657500111514f92a3d3894d0e05b4
commit: 1cbbcb08c786964a16773c39f2536f1923c73c58 [135/140] wil6210: prefetch head of packet
config: make ARCH=microblaze allyesconfig

All error/warnings:

   drivers/net/wireless/ath/wil6210/txrx.c: In function 'wil_vring_reap_rx':
>> drivers/net/wireless/ath/wil6210/txrx.c:381:2: error: implicit declaration of function 'prefetch' [-Werror=implicit-function-declaration]
     prefetch(skb->data);
     ^
   cc1: some warnings being treated as errors

vim +/prefetch +381 drivers/net/wireless/ath/wil6210/txrx.c

   375                  wil_err(wil, "Rx size too large: %d bytes!\n", dmalen);
   376                  kfree_skb(skb);
   377                  return NULL;
   378          }
   379          skb_trim(skb, dmalen);
   380
 > 381          prefetch(skb->data);
   382
   383          wil_hex_dump_txrx("Rx ", DUMP_PREFIX_OFFSET, 16, 1,
   384                            skb->data, skb_headlen(skb), false);

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 9b88440ef05b..0b0975d88b43 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -21,7 +21,7 @@
 #include <linux/ip.h>
 #include <linux/ipv6.h>
 #include <net/ipv6.h>
-#include <asm/processor.h>
+#include <linux/prefetch.h>
 
 #include "wil6210.h"
 #include "wmi.h"
-- 
cgit v1.2.3


From f1d267cab2bc6ecd225abfd8d7e130f9a651408f Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 15 Jan 2014 17:37:42 +0100
Subject: ath: add common function ath_is_mybeacon

this function is used by most ath driver, so it can be moved here.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath.h  | 2 ++
 drivers/net/wireless/ath/main.c | 8 ++++++++
 2 files changed, 10 insertions(+)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index e0ba7cd14252..b59cfbe0276b 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -17,6 +17,7 @@
 #ifndef ATH_H
 #define ATH_H
 
+#include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/if_ether.h>
 #include <linux/spinlock.h>
@@ -165,6 +166,7 @@ struct ath_common {
 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
 				u32 len,
 				gfp_t gfp_mask);
+bool ath_is_mybeacon(struct ath_common *common, struct ieee80211_hdr *hdr);
 
 void ath_hw_setbssidmask(struct ath_common *common);
 void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key);
diff --git a/drivers/net/wireless/ath/main.c b/drivers/net/wireless/ath/main.c
index 8e99540cd90e..8b0ac14d5c32 100644
--- a/drivers/net/wireless/ath/main.c
+++ b/drivers/net/wireless/ath/main.c
@@ -59,6 +59,14 @@ struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
 }
 EXPORT_SYMBOL(ath_rxbuf_alloc);
 
+bool ath_is_mybeacon(struct ath_common *common, struct ieee80211_hdr *hdr)
+{
+	return ieee80211_is_beacon(hdr->frame_control) &&
+		!is_zero_ether_addr(common->curbssid) &&
+		ether_addr_equal_64bits(hdr->addr3, common->curbssid);
+}
+EXPORT_SYMBOL(ath_is_mybeacon);
+
 void ath_printk(const char *level, const struct ath_common* common,
 		const char *fmt, ...)
 {
-- 
cgit v1.2.3


From 1cc47a5b2417b319d022d8aa995888d791b1eee1 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 15 Jan 2014 17:07:15 +0100
Subject: ath9k: use ath_is_mybeacon

This patch will also change behavior of rx_beacons statistic.
Instead of collecting all received beacons, it will collect only
ours. This, IMO make more sense, since for troubleshooting we will
need to know count of our beacons, or both.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/recv.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 5bf3243dce0f..a0ebdd000fc2 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -969,21 +969,6 @@ static void ath9k_process_tsf(struct ath_rx_status *rs,
 		rxs->mactime += 0x100000000ULL;
 }
 
-static bool ath9k_is_mybeacon(struct ath_softc *sc, struct ieee80211_hdr *hdr)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	if (ieee80211_is_beacon(hdr->frame_control)) {
-		RX_STAT_INC(rx_beacons);
-		if (!is_zero_ether_addr(common->curbssid) &&
-		    ether_addr_equal_64bits(hdr->addr3, common->curbssid))
-			return true;
-	}
-
-	return false;
-}
-
 /*
  * For Decrypt or Demic errors, we only mark packet status here and always push
  * up the frame up to let mac80211 handle the actual error case, be it no
@@ -1071,7 +1056,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 		goto exit;
 	}
 
-	rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
+	if (ath_is_mybeacon(common, hdr)) {
+		RX_STAT_INC(rx_beacons);
+		rx_stats->is_mybeacon = true;
+	}
 
 	/*
 	 * This shouldn't happen, but have a safety check anyway.
-- 
cgit v1.2.3


From aeb0e356ec6e0d11b8369bbbb32ae81b92a1a46b Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 15 Jan 2014 17:07:16 +0100
Subject: ath9k_htc: use ath_is_mybeacon

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index b41e008298dc..12e0f32a4905 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -1075,9 +1075,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 
 	last_rssi = priv->rx.last_rssi;
 
-	if (ieee80211_is_beacon(hdr->frame_control) &&
-	    !is_zero_ether_addr(common->curbssid) &&
-	    ether_addr_equal_64bits(hdr->addr3, common->curbssid)) {
+	if (ath_is_mybeacon(common, hdr)) {
 		s8 rssi = rxbuf->rxstatus.rs_rssi;
 
 		if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
-- 
cgit v1.2.3


From d44efe21859777784aea9afef934ad67bbb16935 Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 15 Jan 2014 17:11:15 +0100
Subject: ath5k: use ath_is_mybeacon

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/base.c | 33 ++++++++-------------------------
 1 file changed, 8 insertions(+), 25 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index d85c312170bc..ef35da84f63b 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1238,14 +1238,11 @@ static void
 ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb,
 		     struct ieee80211_rx_status *rxs)
 {
-	struct ath_common *common = ath5k_hw_common(ah);
 	u64 tsf, bc_tstamp;
 	u32 hw_tu;
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
 
-	if (ieee80211_is_beacon(mgmt->frame_control) &&
-	    le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
-	    ether_addr_equal_64bits(mgmt->bssid, common->curbssid)) {
+	if (le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS) {
 		/*
 		 * Received an IBSS beacon with the same BSSID. Hardware *must*
 		 * have updated the local TSF. We have to work around various
@@ -1301,23 +1298,6 @@ ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb,
 	}
 }
 
-static void
-ath5k_update_beacon_rssi(struct ath5k_hw *ah, struct sk_buff *skb, int rssi)
-{
-	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
-	struct ath_common *common = ath5k_hw_common(ah);
-
-	/* only beacons from our BSSID */
-	if (!ieee80211_is_beacon(mgmt->frame_control) ||
-	    !ether_addr_equal_64bits(mgmt->bssid, common->curbssid))
-		return;
-
-	ewma_add(&ah->ah_beacon_rssi_avg, rssi);
-
-	/* in IBSS mode we should keep RSSI statistics per neighbour */
-	/* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */
-}
-
 /*
  * Compute padding position. skb must contain an IEEE 802.11 frame
  */
@@ -1390,6 +1370,7 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb,
 		    struct ath5k_rx_status *rs)
 {
 	struct ieee80211_rx_status *rxs;
+	struct ath_common *common = ath5k_hw_common(ah);
 
 	ath5k_remove_padding(skb);
 
@@ -1442,11 +1423,13 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb,
 
 	trace_ath5k_rx(ah, skb);
 
-	ath5k_update_beacon_rssi(ah, skb, rs->rs_rssi);
+	if (ath_is_mybeacon(common, (struct ieee80211_hdr *)skb->data)) {
+		ewma_add(&ah->ah_beacon_rssi_avg, rs->rs_rssi);
 
-	/* check beacons in IBSS mode */
-	if (ah->opmode == NL80211_IFTYPE_ADHOC)
-		ath5k_check_ibss_tsf(ah, skb, rxs);
+		/* check beacons in IBSS mode */
+		if (ah->opmode == NL80211_IFTYPE_ADHOC)
+			ath5k_check_ibss_tsf(ah, skb, rxs);
+	}
 
 	ieee80211_rx(ah->hw, skb);
 }
-- 
cgit v1.2.3


From e4e19c031901e95dc7d1cf0a2c9c50525d71651f Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Wed, 15 Jan 2014 17:11:39 +0100
Subject: carl9170: use ath_is_mybeacon

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/rx.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless/ath')

diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c
index 1b1b20751ead..536bc46a2912 100644
--- a/drivers/net/wireless/ath/carl9170/rx.c
+++ b/drivers/net/wireless/ath/carl9170/rx.c
@@ -519,6 +519,7 @@ static void carl9170_ps_beacon(struct ar9170 *ar, void *data, unsigned int len)
 {
 	struct ieee80211_hdr *hdr = data;
 	struct ieee80211_tim_ie *tim_ie;
+	struct ath_common *common = &ar->common;
 	u8 *tim;
 	u8 tim_len;
 	bool cam;
@@ -526,17 +527,13 @@ static void carl9170_ps_beacon(struct ar9170 *ar, void *data, unsigned int len)
 	if (likely(!(ar->hw->conf.flags & IEEE80211_CONF_PS)))
 		return;
 
-	/* check if this really is a beacon */
-	if (!ieee80211_is_beacon(hdr->frame_control))
-		return;
-
 	/* min. beacon length + FCS_LEN */
 	if (len <= 40 + FCS_LEN)
 		return;
 
+	/* check if this really is a beacon */
 	/* and only beacons from the associated BSSID, please */
-	if (!ether_addr_equal_64bits(hdr->addr3, ar->common.curbssid) ||
-	    !ar->common.curaid)
+	if (!ath_is_mybeacon(common, hdr) || !common->curaid)
 		return;
 
 	ar->ps.last_beacon = jiffies;
-- 
cgit v1.2.3