From ce896476c65d72b4b99fa09c2f33436b4198f034 Mon Sep 17 00:00:00 2001 From: James Hughes Date: Mon, 20 Jan 2020 11:12:40 +0000 Subject: net: usb: lan78xx: Add .ndo_features_check As reported by Eric Dumazet, there are still some outstanding cases where the driver does not handle TSO correctly when skb's are over a certain size. Most cases have been fixed, this patch should ensure that forwarded SKB's that are greater than MAX_SINGLE_PACKET_SIZE - TX_OVERHEAD are software segmented and handled correctly. Signed-off-by: James Hughes Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 75bdfae5f3e2..c2a58f05b9a1 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -3668,6 +3669,19 @@ static void lan78xx_tx_timeout(struct net_device *net) tasklet_schedule(&dev->bh); } +static netdev_features_t lan78xx_features_check(struct sk_buff *skb, + struct net_device *netdev, + netdev_features_t features) +{ + if (skb->len + TX_OVERHEAD > MAX_SINGLE_PACKET_SIZE) + features &= ~NETIF_F_GSO_MASK; + + features = vlan_features_check(skb, features); + features = vxlan_features_check(skb, features); + + return features; +} + static const struct net_device_ops lan78xx_netdev_ops = { .ndo_open = lan78xx_open, .ndo_stop = lan78xx_stop, @@ -3681,6 +3695,7 @@ static const struct net_device_ops lan78xx_netdev_ops = { .ndo_set_features = lan78xx_set_features, .ndo_vlan_rx_add_vid = lan78xx_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = lan78xx_vlan_rx_kill_vid, + .ndo_features_check = lan78xx_features_check, }; static void lan78xx_stat_monitor(struct timer_list *t) -- cgit v1.2.3 From a39142728d0e60a76b67db3cbc187d61fde7b46d Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:05 +0800 Subject: r8152: fix runtime resume for linking change Fix the runtime resume doesn't work normally for linking change. 1. Reset the settings and status of runtime suspend. 2. Sync the linking status. 3. Poll the linking change. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 031cb8fff909..115559707683 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -365,8 +365,10 @@ #define DEBUG_LTSSM 0x0082 /* PLA_EXTRA_STATUS */ +#define CUR_LINK_OK BIT(15) #define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */ #define LINK_CHANGE_FLAG BIT(8) +#define POLL_LINK_CHG BIT(0) /* USB_USB2PHY */ #define USB2PHY_SUSPEND 0x0001 @@ -5387,6 +5389,16 @@ static void r8153_init(struct r8152 *tp) else ocp_data |= DYNAMIC_BURST; ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data); + + r8153_queue_wake(tp, false); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_data |= CUR_LINK_OK; + else + ocp_data &= ~CUR_LINK_OK; + ocp_data |= POLL_LINK_CHG; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); } ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2); @@ -5416,6 +5428,7 @@ static void r8153_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001); r8153_power_cut_en(tp, false); + rtl_runtime_suspend_enable(tp, false); r8153_u1u2en(tp, true); r8153_mac_clk_spd(tp, false); usb_enable_lpm(tp->udev); @@ -5484,6 +5497,14 @@ static void r8153b_init(struct r8152 *tp) r8153b_ups_en(tp, false); r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_data |= CUR_LINK_OK; + else + ocp_data &= ~CUR_LINK_OK; + ocp_data |= POLL_LINK_CHG; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); r8153b_u1u2en(tp, true); usb_enable_lpm(tp->udev); -- cgit v1.2.3 From f99cd20eda12b1920ffc284a736437c016b3a5a2 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:06 +0800 Subject: r8152: reset flow control patch when linking on for RTL8153B When linking ON, the patch of flow control has to be reset. This makes sure the patch works normally. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 115559707683..504db2348a3e 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2865,6 +2865,17 @@ static int rtl8153_enable(struct r8152 *tp) r8153_set_rx_early_timeout(tp); r8153_set_rx_early_size(tp); + if (tp->version == RTL_VER_09) { + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); + ocp_data &= ~FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); + usleep_range(1000, 2000); + ocp_data |= FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); + } + return rtl_enable(tp); } -- cgit v1.2.3 From 9583a3638dc07cc1878f41265e85ed497f72efcb Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:07 +0800 Subject: r8152: get default setting of WOL before initializing Initailization would reset runtime suspend by tp->saved_wolopts, so the tp->saved_wolopts should be set before initializing. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 504db2348a3e..c3217a5c2fe1 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -6739,6 +6739,11 @@ static int rtl8152_probe(struct usb_interface *intf, intf->needs_remote_wakeup = 1; + if (!rtl_can_wakeup(tp)) + __rtl_set_wol(tp, 0); + else + tp->saved_wolopts = __rtl_get_wol(tp); + tp->rtl_ops.init(tp); #if IS_BUILTIN(CONFIG_USB_RTL8152) /* Retry in case request_firmware() is not ready yet. */ @@ -6756,10 +6761,6 @@ static int rtl8152_probe(struct usb_interface *intf, goto out1; } - if (!rtl_can_wakeup(tp)) - __rtl_set_wol(tp, 0); - - tp->saved_wolopts = __rtl_get_wol(tp); if (tp->saved_wolopts) device_set_wakeup_enable(&udev->dev, true); else -- cgit v1.2.3 From 809a7fc6593f288d6f820ef6cc57b9d69b5f9474 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:08 +0800 Subject: r8152: disable U2P3 for RTL8153B Enable U2P3 may miss zero packet for bulk-in. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index c3217a5c2fe1..bc6b2f8aaa7e 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3389,7 +3389,6 @@ static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable) r8153b_ups_en(tp, false); r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); - r8153_u2p3en(tp, true); r8153b_u1u2en(tp, true); } } @@ -4688,7 +4687,6 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp) r8153_aldps_en(tp, true); r8152b_enable_fc(tp); - r8153_u2p3en(tp, true); set_bit(PHY_RESET, &tp->flags); } @@ -5018,7 +5016,6 @@ static void rtl8153b_up(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B); r8153_aldps_en(tp, true); - r8153_u2p3en(tp, true); r8153b_u1u2en(tp, true); } -- cgit v1.2.3 From 08997b5eec08a2c29367f19a74abdea54b299406 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:09 +0800 Subject: r8152: Disable PLA MCU clock speed down PLA MCU clock speed down could only be enabled when tx/rx are disabled. Otherwise, the packet loss may occur. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index bc6b2f8aaa7e..1fb85c79bd33 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -324,6 +324,7 @@ #define MAC_CLK_SPDWN_EN BIT(15) /* PLA_MAC_PWR_CTRL3 */ +#define PLA_MCU_SPDWN_EN BIT(14) #define PKT_AVAIL_SPDWN_EN 0x0100 #define SUSPEND_SPDWN_EN 0x0004 #define U1U2_SPDWN_EN 0x0002 @@ -5005,6 +5006,8 @@ static void rtl8153_down(struct r8152 *tp) static void rtl8153b_up(struct r8152 *tp) { + u32 ocp_data; + if (test_bit(RTL8152_UNPLUG, &tp->flags)) return; @@ -5015,17 +5018,27 @@ static void rtl8153b_up(struct r8152 *tp) r8153_first_init(tp); ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); + ocp_data &= ~PLA_MCU_SPDWN_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); + r8153_aldps_en(tp, true); r8153b_u1u2en(tp, true); } static void rtl8153b_down(struct r8152 *tp) { + u32 ocp_data; + if (test_bit(RTL8152_UNPLUG, &tp->flags)) { rtl_drop_queued_tx(tp); return; } + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); + ocp_data |= PLA_MCU_SPDWN_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); + r8153b_u1u2en(tp, false); r8153_u2p3en(tp, false); r8153b_power_cut_en(tp, false); @@ -5521,6 +5534,10 @@ static void r8153b_init(struct r8152 *tp) ocp_data |= MAC_CLK_SPDWN_EN; ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); + ocp_data &= ~PLA_MCU_SPDWN_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); + set_bit(GREEN_ETHERNET, &tp->flags); /* rx aggregation */ -- cgit v1.2.3 From d7f1b59655efb5a285d227c8f9853a98eab5c2fd Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:10 +0800 Subject: r8152: disable test IO for RTL8153B For RTL8153B with QFN32, disable test IO. Otherwise, it may cause abnormal behavior for the device randomly. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 1fb85c79bd33..7efeddad1fc8 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -312,6 +312,7 @@ /* PLA_PHY_PWR */ #define TX_10M_IDLE_EN 0x0080 #define PFM_PWM_SWITCH 0x0040 +#define TEST_IO_OFF BIT(4) /* PLA_MAC_PWR_CTRL */ #define D3_CLK_GATED_EN 0x00004000 @@ -5538,6 +5539,15 @@ static void r8153b_init(struct r8152 *tp) ocp_data &= ~PLA_MCU_SPDWN_EN; ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); + if (tp->version == RTL_VER_09) { + /* Disable Test IO for 32QFN */ + if (ocp_read_byte(tp, MCU_TYPE_PLA, 0xdc00) & BIT(5)) { + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); + ocp_data |= TEST_IO_OFF; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); + } + } + set_bit(GREEN_ETHERNET, &tp->flags); /* rx aggregation */ -- cgit v1.2.3 From a0246dafe684a6d5ad31ccd59af0334ccf0cc7b2 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:11 +0800 Subject: r8152: don't enable U1U2 with USB_SPEED_HIGH for RTL8153B For certain platforms, it causes USB reset periodically. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 7efeddad1fc8..b1a00f29455b 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3391,7 +3391,8 @@ static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable) r8153b_ups_en(tp, false); r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); - r8153b_u1u2en(tp, true); + if (tp->udev->speed != USB_SPEED_HIGH) + r8153b_u1u2en(tp, true); } } @@ -5024,7 +5025,9 @@ static void rtl8153b_up(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); r8153_aldps_en(tp, true); - r8153b_u1u2en(tp, true); + + if (tp->udev->speed != USB_SPEED_HIGH) + r8153b_u1u2en(tp, true); } static void rtl8153b_down(struct r8152 *tp) @@ -5527,7 +5530,9 @@ static void r8153b_init(struct r8152 *tp) ocp_data &= ~CUR_LINK_OK; ocp_data |= POLL_LINK_CHG; ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); - r8153b_u1u2en(tp, true); + + if (tp->udev->speed != USB_SPEED_HIGH) + r8153b_u1u2en(tp, true); usb_enable_lpm(tp->udev); /* MAC clock speed down */ -- cgit v1.2.3 From 19813162895a696c5814d76e5f8fb6203d70f6e0 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:12 +0800 Subject: r8152: avoid the MCU to clear the lanwake Avoid the MCU to clear the lanwake after suspending. It may cause the WOL fail. Disable LANWAKE_CLR_EN before suspending. Besides,enable it and reset the lanwake status when resuming or initializing. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index b1a00f29455b..c037fc7adcea 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -68,6 +68,7 @@ #define PLA_LED_FEATURE 0xdd92 #define PLA_PHYAR 0xde00 #define PLA_BOOT_CTRL 0xe004 +#define PLA_LWAKE_CTRL_REG 0xe007 #define PLA_GPHY_INTR_IMR 0xe022 #define PLA_EEE_CR 0xe040 #define PLA_EEEP_CR 0xe080 @@ -95,6 +96,7 @@ #define PLA_TALLYCNT 0xe890 #define PLA_SFF_STS_7 0xe8de #define PLA_PHYSTATUS 0xe908 +#define PLA_CONFIG6 0xe90a /* CONFIG6 */ #define PLA_BP_BA 0xfc26 #define PLA_BP_0 0xfc28 #define PLA_BP_1 0xfc2a @@ -300,6 +302,9 @@ #define LINK_ON_WAKE_EN 0x0010 #define LINK_OFF_WAKE_EN 0x0008 +/* PLA_CONFIG6 */ +#define LANWAKE_CLR_EN BIT(0) + /* PLA_CONFIG5 */ #define BWF_EN 0x0040 #define MWF_EN 0x0020 @@ -356,6 +361,9 @@ /* PLA_BOOT_CTRL */ #define AUTOLOAD_DONE 0x0002 +/* PLA_LWAKE_CTRL_REG */ +#define LANWAKE_PIN BIT(7) + /* PLA_SUSPEND_FLAG */ #define LINK_CHG_EVENT BIT(0) @@ -4968,6 +4976,8 @@ static void rtl8152_down(struct r8152 *tp) static void rtl8153_up(struct r8152 *tp) { + u32 ocp_data; + if (test_bit(RTL8152_UNPLUG, &tp->flags)) return; @@ -4975,6 +4985,15 @@ static void rtl8153_up(struct r8152 *tp) r8153_u2p3en(tp, false); r8153_aldps_en(tp, false); r8153_first_init(tp); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6); + ocp_data |= LANWAKE_CLR_EN; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG); + ocp_data &= ~LANWAKE_PIN; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data); + r8153_aldps_en(tp, true); switch (tp->version) { @@ -4993,11 +5012,17 @@ static void rtl8153_up(struct r8152 *tp) static void rtl8153_down(struct r8152 *tp) { + u32 ocp_data; + if (test_bit(RTL8152_UNPLUG, &tp->flags)) { rtl_drop_queued_tx(tp); return; } + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6); + ocp_data &= ~LANWAKE_CLR_EN; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data); + r8153_u1u2en(tp, false); r8153_u2p3en(tp, false); r8153_power_cut_en(tp, false); @@ -5458,6 +5483,14 @@ static void r8153_init(struct r8152 *tp) r8153_mac_clk_spd(tp, false); usb_enable_lpm(tp->udev); + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6); + ocp_data |= LANWAKE_CLR_EN; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG); + ocp_data &= ~LANWAKE_PIN; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data); + /* rx aggregation */ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); -- cgit v1.2.3 From aa475d935272481c9ffb1ae54eeca5c1819fbe1a Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 22 Jan 2020 16:02:13 +0800 Subject: r8152: disable DelayPhyPwrChg When enabling this, the device would wait an internal signal which wouldn't be triggered. Then, the device couldn't enter P3 mode, so the power consumption is increased. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index c037fc7adcea..3f425f974d03 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -31,7 +31,7 @@ #define NETNEXT_VERSION "11" /* Information for net */ -#define NET_VERSION "10" +#define NET_VERSION "11" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -109,6 +109,7 @@ #define PLA_BP_EN 0xfc38 #define USB_USB2PHY 0xb41e +#define USB_SSPHYLINK1 0xb426 #define USB_SSPHYLINK2 0xb428 #define USB_U2P3_CTRL 0xb460 #define USB_CSR_DUMMY1 0xb464 @@ -384,6 +385,9 @@ #define USB2PHY_SUSPEND 0x0001 #define USB2PHY_L1 0x0002 +/* USB_SSPHYLINK1 */ +#define DELAY_PHY_PWR_CHG BIT(1) + /* USB_SSPHYLINK2 */ #define pwd_dn_scale_mask 0x3ffe #define pwd_dn_scale(x) ((x) << 1) @@ -4994,6 +4998,10 @@ static void rtl8153_up(struct r8152 *tp) ocp_data &= ~LANWAKE_PIN; ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data); + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1); + ocp_data &= ~DELAY_PHY_PWR_CHG; + ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data); + r8153_aldps_en(tp, true); switch (tp->version) { -- cgit v1.2.3