From fadf3a28054404f075c05d9ca8ebd4b4ce9ebc0f Mon Sep 17 00:00:00 2001 From: allan Date: Wed, 30 Nov 2016 16:29:08 +0800 Subject: net: asix: Fix AX88772_suspend() USB vendor commands failure issues The change fixes AX88772_suspend() USB vendor commands failure issues. Signed-off-by: Allan Chou Tested-by: Allan Chou Tested-by: Jon Hunter Signed-off-by: David S. Miller --- drivers/net/usb/asix_devices.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index cce24950a0ab..dc7b6392e75a 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -603,12 +603,12 @@ static void ax88772_suspend(struct usbnet *dev) u16 medium; /* Stop MAC operation */ - medium = asix_read_medium_status(dev, 0); + medium = asix_read_medium_status(dev, 1); medium &= ~AX_MEDIUM_RE; - asix_write_medium_mode(dev, medium, 0); + asix_write_medium_mode(dev, medium, 1); netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n", - asix_read_medium_status(dev, 0)); + asix_read_medium_status(dev, 1)); /* Preserve BMCR for restoring */ priv->presvd_phy_bmcr = -- cgit v1.2.3 From d5c83d0d1d83b3798c71e0c8b7c3624d39c91d88 Mon Sep 17 00:00:00 2001 From: Kristian Evensen Date: Thu, 1 Dec 2016 14:23:17 +0100 Subject: cdc_ether: Fix handling connection notification MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduced a work-around in usbnet_cdc_status() for devices that exported cdc carrier on twice on connect. Before the commit, this behavior caused the link state to be incorrect. It was assumed that all CDC Ethernet devices would either export this behavior, or send one off and then one on notification (which seems to be the default behavior). Unfortunately, it turns out multiple devices sends a connection notification multiple times per second (via an interrupt), even when connection state does not change. This has been observed with several different USB LAN dongles (at least), for example 13b1:0041 (Linksys). After bfe9b9d2df66, the link state has been set as down and then up for each notification. This has caused a flood of Netlink NEWLINK messages and syslog to be flooded with messages similar to: cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped This commit fixes the behavior by reverting usbnet_cdc_status() to how it was before bfe9b9d2df66. The work-around has been moved to a separate status-function which is only called when a known, affect device is detected. v1->v2: * Do not open-code netif_carrier_ok() (thanks Henning Schild). * Call netif_carrier_off() instead of usb_link_change(). This prevents calling schedule_work() twice without giving the work queue a chance to be processed (thanks Bjørn Mork). Fixes: bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") Reported-by: Henning Schild Signed-off-by: Kristian Evensen Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index c47ec0a04c8e..dd623f674487 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -388,12 +388,6 @@ void usbnet_cdc_status(struct usbnet *dev, struct urb *urb) case USB_CDC_NOTIFY_NETWORK_CONNECTION: netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n", event->wValue ? "on" : "off"); - - /* Work-around for devices with broken off-notifications */ - if (event->wValue && - !test_bit(__LINK_STATE_NOCARRIER, &dev->net->state)) - usbnet_link_change(dev, 0, 0); - usbnet_link_change(dev, !!event->wValue, 0); break; case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */ @@ -466,6 +460,36 @@ static int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb) return 1; } +/* Ensure correct link state + * + * Some devices (ZTE MF823/831/910) export two carrier on notifications when + * connected. This causes the link state to be incorrect. Work around this by + * always setting the state to off, then on. + */ +void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb) +{ + struct usb_cdc_notification *event; + + if (urb->actual_length < sizeof(*event)) + return; + + event = urb->transfer_buffer; + + if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) { + usbnet_cdc_status(dev, urb); + return; + } + + netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n", + event->wValue ? "on" : "off"); + + if (event->wValue && + netif_carrier_ok(dev->net)) + netif_carrier_off(dev->net); + + usbnet_link_change(dev, !!event->wValue, 0); +} + static const struct driver_info cdc_info = { .description = "CDC Ethernet Device", .flags = FLAG_ETHER | FLAG_POINTTOPOINT, @@ -481,7 +505,7 @@ static const struct driver_info zte_cdc_info = { .flags = FLAG_ETHER | FLAG_POINTTOPOINT, .bind = usbnet_cdc_zte_bind, .unbind = usbnet_cdc_unbind, - .status = usbnet_cdc_status, + .status = usbnet_cdc_zte_status, .set_rx_mode = usbnet_cdc_update_filter, .manage_power = usbnet_manage_power, .rx_fixup = usbnet_cdc_zte_rx_fixup, -- cgit v1.2.3 From 9bd813da24cd49d749911d7fdc0e9ae9a673d746 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Thu, 1 Dec 2016 16:52:05 +0100 Subject: NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for PID 0x1040 of Telit LE922A. The qmi adapter requires to have DTR set for proper working, so QMI_WWAN_QUIRK_DTR has been enabled. Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3ff76c6db4f6..6fe1cdb0174f 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -894,6 +894,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ {QMI_FIXED_INTF(0x1bc7, 0x1201, 2)}, /* Telit LE920 */ {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)}, /* XS Stick W100-2 from 4G Systems */ -- cgit v1.2.3