From e56b3d94d939f52d46209b9e1b6700c5bfff3123 Mon Sep 17 00:00:00 2001 From: Andrey Zhizhikin Date: Fri, 8 Jan 2021 09:58:39 +0000 Subject: rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM request MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by: Andrey Zhizhikin Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/rndis_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 6609d21ef894..f813ca9dec53 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -387,7 +387,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) reply_len = sizeof *phym; retval = rndis_query(dev, intf, u.buf, RNDIS_OID_GEN_PHYSICAL_MEDIUM, - 0, (void **) &phym, &reply_len); + reply_len, (void **)&phym, &reply_len); if (retval != 0 || !phym) { /* OID is optional so don't fail here. */ phym_unspec = cpu_to_le32(RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED); -- cgit v1.2.3 From cb82a54904a99df9e8f9e9d282046055dae5a730 Mon Sep 17 00:00:00 2001 From: Leon Schuermann Date: Mon, 11 Jan 2021 20:03:13 +0100 Subject: r8152: Add Lenovo Powered USB-C Travel Hub This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to use the cdc_ether driver. However, using this driver, with the system suspended the device constantly sends pause-frames as soon as the receive buffer fills up. This causes issues with other devices, where some Ethernet switches stop forwarding packets altogether. Using the Realtek driver (r8152) fixes this issue. Pause frames are no longer sent while the host system is suspended. Signed-off-by: Leon Schuermann Tested-by: Leon Schuermann Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online Signed-off-by: Jakub Kicinski --- drivers/net/usb/cdc_ether.c | 7 +++++++ drivers/net/usb/r8152.c | 1 + 2 files changed, 8 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 8c1d61c2cbac..6aaa0675c28a 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -793,6 +793,13 @@ static const struct usb_device_id products[] = { .driver_info = 0, }, +/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x721e, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + /* ThinkPad USB-C Dock Gen 2 (based on Realtek RTL8153) */ { USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0xa387, USB_CLASS_COMM, diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index c448d6089821..67cd6986634f 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -6877,6 +6877,7 @@ static const struct usb_device_id rtl8152_table[] = { {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7205)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x720c)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7214)}, + {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x721e)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0xa387)}, {REALTEK_USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041)}, {REALTEK_USB_DEVICE(VENDOR_ID_NVIDIA, 0x09ff)}, -- cgit v1.2.3 From 2284bbd0cf3981462dc6d729c89851c66b05a66a Mon Sep 17 00:00:00 2001 From: Leon Schuermann Date: Mon, 11 Jan 2021 20:03:15 +0100 Subject: r8153_ecm: Add Lenovo Powered USB-C Hub as a fallback of r8152 This commit enables the use of the r8153_ecm driver, introduced with commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip. This results in the following driver preference: - if r8152 is available, use the r8152 driver - if r8152 is not available, use the r8153_ecm driver This is done to prevent the NIC from constantly sending pause frames when the host system enters standby (fixed by using the r8152 driver in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing the device to work with the r8153_ecm driver as a fallback. Signed-off-by: Leon Schuermann Tested-by: Leon Schuermann Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online Signed-off-by: Jakub Kicinski --- drivers/net/usb/r8153_ecm.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/r8153_ecm.c b/drivers/net/usb/r8153_ecm.c index 2c3fabd38b16..20b2df8d74ae 100644 --- a/drivers/net/usb/r8153_ecm.c +++ b/drivers/net/usb/r8153_ecm.c @@ -122,12 +122,20 @@ static const struct driver_info r8153_info = { }; static const struct usb_device_id products[] = { +/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */ { USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&r8153_info, }, +/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_LENOVO, 0x721e, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&r8153_info, +}, + { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); -- cgit v1.2.3 From 7da17624e7948d5d9660b910f8079d26d26ce453 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jan 2021 15:43:09 +0100 Subject: nt: usb: USB_RTL8153_ECM should not default to y In general, device drivers should not be enabled by default. Fixes: 657bc1d10bfc23ac ("r8153_ecm: avoid to be prior to r8152 driver") Signed-off-by: Geert Uytterhoeven Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20210113144309.1384615-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski --- drivers/net/usb/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 1e3719028780..fbbe78643631 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -631,7 +631,6 @@ config USB_NET_AQC111 config USB_RTL8153_ECM tristate "RTL8153 ECM support" depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n) - default y help This option supports ECM mode for RTL8153 ethernet adapter, when CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not -- cgit v1.2.3