From b4cdae20ef956fb80b231cbbcfcdb446fed763ca Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Fri, 13 Jul 2012 05:26:29 +0000 Subject: asix: Rename asix.c to asix_devices.c This patch further creates two additional copies of asix.c. In another patch these copies will be used to factor out common code. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller --- drivers/net/usb/asix.h | 1680 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1680 insertions(+) create mode 100644 drivers/net/usb/asix.h (limited to 'drivers/net/usb/asix.h') diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h new file mode 100644 index 000000000000..6564c32d3af0 --- /dev/null +++ b/drivers/net/usb/asix.h @@ -0,0 +1,1680 @@ +/* + * ASIX AX8817X based USB 2.0 Ethernet Devices + * Copyright (C) 2003-2006 David Hollis + * Copyright (C) 2005 Phil Chang + * Copyright (C) 2006 James Painter + * Copyright (c) 2002-2003 TiVo Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +// #define DEBUG // error path messages, extra info +// #define VERBOSE // more; success messages + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "22-Dec-2011" +#define DRIVER_NAME "asix" + +/* ASIX AX8817X based USB 2.0 Ethernet Devices */ + +#define AX_CMD_SET_SW_MII 0x06 +#define AX_CMD_READ_MII_REG 0x07 +#define AX_CMD_WRITE_MII_REG 0x08 +#define AX_CMD_SET_HW_MII 0x0a +#define AX_CMD_READ_EEPROM 0x0b +#define AX_CMD_WRITE_EEPROM 0x0c +#define AX_CMD_WRITE_ENABLE 0x0d +#define AX_CMD_WRITE_DISABLE 0x0e +#define AX_CMD_READ_RX_CTL 0x0f +#define AX_CMD_WRITE_RX_CTL 0x10 +#define AX_CMD_READ_IPG012 0x11 +#define AX_CMD_WRITE_IPG0 0x12 +#define AX_CMD_WRITE_IPG1 0x13 +#define AX_CMD_READ_NODE_ID 0x13 +#define AX_CMD_WRITE_NODE_ID 0x14 +#define AX_CMD_WRITE_IPG2 0x14 +#define AX_CMD_WRITE_MULTI_FILTER 0x16 +#define AX88172_CMD_READ_NODE_ID 0x17 +#define AX_CMD_READ_PHY_ID 0x19 +#define AX_CMD_READ_MEDIUM_STATUS 0x1a +#define AX_CMD_WRITE_MEDIUM_MODE 0x1b +#define AX_CMD_READ_MONITOR_MODE 0x1c +#define AX_CMD_WRITE_MONITOR_MODE 0x1d +#define AX_CMD_READ_GPIOS 0x1e +#define AX_CMD_WRITE_GPIOS 0x1f +#define AX_CMD_SW_RESET 0x20 +#define AX_CMD_SW_PHY_STATUS 0x21 +#define AX_CMD_SW_PHY_SELECT 0x22 + +#define AX_MONITOR_MODE 0x01 +#define AX_MONITOR_LINK 0x02 +#define AX_MONITOR_MAGIC 0x04 +#define AX_MONITOR_HSFS 0x10 + +/* AX88172 Medium Status Register values */ +#define AX88172_MEDIUM_FD 0x02 +#define AX88172_MEDIUM_TX 0x04 +#define AX88172_MEDIUM_FC 0x10 +#define AX88172_MEDIUM_DEFAULT \ + ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC ) + +#define AX_MCAST_FILTER_SIZE 8 +#define AX_MAX_MCAST 64 + +#define AX_SWRESET_CLEAR 0x00 +#define AX_SWRESET_RR 0x01 +#define AX_SWRESET_RT 0x02 +#define AX_SWRESET_PRTE 0x04 +#define AX_SWRESET_PRL 0x08 +#define AX_SWRESET_BZ 0x10 +#define AX_SWRESET_IPRL 0x20 +#define AX_SWRESET_IPPD 0x40 + +#define AX88772_IPG0_DEFAULT 0x15 +#define AX88772_IPG1_DEFAULT 0x0c +#define AX88772_IPG2_DEFAULT 0x12 + +/* AX88772 & AX88178 Medium Mode Register */ +#define AX_MEDIUM_PF 0x0080 +#define AX_MEDIUM_JFE 0x0040 +#define AX_MEDIUM_TFC 0x0020 +#define AX_MEDIUM_RFC 0x0010 +#define AX_MEDIUM_ENCK 0x0008 +#define AX_MEDIUM_AC 0x0004 +#define AX_MEDIUM_FD 0x0002 +#define AX_MEDIUM_GM 0x0001 +#define AX_MEDIUM_SM 0x1000 +#define AX_MEDIUM_SBP 0x0800 +#define AX_MEDIUM_PS 0x0200 +#define AX_MEDIUM_RE 0x0100 + +#define AX88178_MEDIUM_DEFAULT \ + (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ + AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ + AX_MEDIUM_RE) + +#define AX88772_MEDIUM_DEFAULT \ + (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ + AX_MEDIUM_TFC | AX_MEDIUM_PS | \ + AX_MEDIUM_AC | AX_MEDIUM_RE) + +/* AX88772 & AX88178 RX_CTL values */ +#define AX_RX_CTL_SO 0x0080 +#define AX_RX_CTL_AP 0x0020 +#define AX_RX_CTL_AM 0x0010 +#define AX_RX_CTL_AB 0x0008 +#define AX_RX_CTL_SEP 0x0004 +#define AX_RX_CTL_AMALL 0x0002 +#define AX_RX_CTL_PRO 0x0001 +#define AX_RX_CTL_MFB_2048 0x0000 +#define AX_RX_CTL_MFB_4096 0x0100 +#define AX_RX_CTL_MFB_8192 0x0200 +#define AX_RX_CTL_MFB_16384 0x0300 + +#define AX_DEFAULT_RX_CTL (AX_RX_CTL_SO | AX_RX_CTL_AB) + +/* GPIO 0 .. 2 toggles */ +#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ +#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ +#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */ +#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */ +#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ +#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ +#define AX_GPIO_RESERVED 0x40 /* Reserved */ +#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ + +#define AX_EEPROM_MAGIC 0xdeadbeef +#define AX88172_EEPROM_LEN 0x40 +#define AX88772_EEPROM_LEN 0xff + +#define PHY_MODE_MARVELL 0x0000 +#define MII_MARVELL_LED_CTRL 0x0018 +#define MII_MARVELL_STATUS 0x001b +#define MII_MARVELL_CTRL 0x0014 + +#define MARVELL_LED_MANUAL 0x0019 + +#define MARVELL_STATUS_HWCFG 0x0004 + +#define MARVELL_CTRL_TXDELAY 0x0002 +#define MARVELL_CTRL_RXDELAY 0x0080 + +#define PHY_MODE_RTL8211CL 0x000C + +/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ +struct asix_data { + u8 multi_filter[AX_MCAST_FILTER_SIZE]; + u8 mac_addr[ETH_ALEN]; + u8 phymode; + u8 ledmode; + u8 eeprom_len; +}; + +struct ax88172_int_data { + __le16 res1; + u8 link; + __le16 res2; + u8 status; + __le16 res3; +} __packed; + +static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + void *buf; + int err = -ENOMEM; + + netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + goto out; + + err = usb_control_msg( + dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + cmd, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_GET_TIMEOUT); + if (err == size) + memcpy(data, buf, size); + else if (err >= 0) + err = -EINVAL; + kfree(buf); + +out: + return err; +} + +static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + void *buf = NULL; + int err = -ENOMEM; + + netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + if (data) { + buf = kmemdup(data, size, GFP_KERNEL); + if (!buf) + goto out; + } + + err = usb_control_msg( + dev->udev, + usb_sndctrlpipe(dev->udev, 0), + cmd, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_SET_TIMEOUT); + kfree(buf); + +out: + return err; +} + +static void asix_async_cmd_callback(struct urb *urb) +{ + struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; + int status = urb->status; + + if (status < 0) + printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d", + status); + + kfree(req); + usb_free_urb(urb); +} + +static void +asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + struct usb_ctrlrequest *req; + int status; + struct urb *urb; + + netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n"); + return; + } + + req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); + if (!req) { + netdev_err(dev->net, "Failed to allocate memory for control request\n"); + usb_free_urb(urb); + return; + } + + req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + req->bRequest = cmd; + req->wValue = cpu_to_le16(value); + req->wIndex = cpu_to_le16(index); + req->wLength = cpu_to_le16(size); + + usb_fill_control_urb(urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), + (void *)req, data, size, + asix_async_cmd_callback, req); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status < 0) { + netdev_err(dev->net, "Error submitting the control message: status=%d\n", + status); + kfree(req); + usb_free_urb(urb); + } +} + +static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int offset = 0; + + while (offset + sizeof(u32) < skb->len) { + struct sk_buff *ax_skb; + u16 size; + u32 header = get_unaligned_le32(skb->data + offset); + + offset += sizeof(u32); + + /* get the packet length */ + size = (u16) (header & 0x7ff); + if (size != ((~header >> 16) & 0x07ff)) { + netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n"); + return 0; + } + + if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || + (size + offset > skb->len)) { + netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n", + size); + return 0; + } + ax_skb = netdev_alloc_skb_ip_align(dev->net, size); + if (!ax_skb) + return 0; + + skb_put(ax_skb, size); + memcpy(ax_skb->data, skb->data + offset, size); + usbnet_skb_return(dev, ax_skb); + + offset += (size + 1) & 0xfffe; + } + + if (skb->len != offset) { + netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n", + skb->len); + return 0; + } + return 1; +} + +static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int padlen; + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + u32 packet_len; + u32 padbytes = 0xffff0000; + + padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; + + /* We need to push 4 bytes in front of frame (packet_len) + * and maybe add 4 bytes after the end (if padlen is 4) + * + * Avoid skb_copy_expand() expensive call, using following rules : + * - We are allowed to push 4 bytes in headroom if skb_header_cloned() + * is false (and if we have 4 bytes of headroom) + * - We are allowed to put 4 bytes at tail if skb_cloned() + * is false (and if we have 4 bytes of tailroom) + * + * TCP packets for example are cloned, but skb_header_release() + * was called in tcp stack, allowing us to use headroom for our needs. + */ + if (!skb_header_cloned(skb) && + !(padlen && skb_cloned(skb)) && + headroom + tailroom >= 4 + padlen) { + /* following should not happen, but better be safe */ + if (headroom < 4 || + tailroom < padlen) { + skb->data = memmove(skb->head + 4, skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + } + } else { + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, 4, padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; + skb_push(skb, 4); + cpu_to_le32s(&packet_len); + skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); + + if (padlen) { + cpu_to_le32s(&padbytes); + memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); + skb_put(skb, sizeof(padbytes)); + } + return skb; +} + +static void asix_status(struct usbnet *dev, struct urb *urb) +{ + struct ax88172_int_data *event; + int link; + + if (urb->actual_length < 8) + return; + + event = urb->transfer_buffer; + link = event->link & 0x01; + if (netif_carrier_ok(dev->net) != link) { + if (link) { + netif_carrier_on(dev->net); + usbnet_defer_kevent (dev, EVENT_LINK_RESET ); + } else + netif_carrier_off(dev->net); + netdev_dbg(dev->net, "Link Status is: %d\n", link); + } +} + +static inline int asix_set_sw_mii(struct usbnet *dev) +{ + int ret; + ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable software MII access\n"); + return ret; +} + +static inline int asix_set_hw_mii(struct usbnet *dev) +{ + int ret; + ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable hardware MII access\n"); + return ret; +} + +static inline int asix_get_phy_addr(struct usbnet *dev) +{ + u8 buf[2]; + int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); + + netdev_dbg(dev->net, "asix_get_phy_addr()\n"); + + if (ret < 0) { + netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); + goto out; + } + netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", + *((__le16 *)buf)); + ret = buf[1]; + +out: + return ret; +} + +static int asix_sw_reset(struct usbnet *dev, u8 flags) +{ + int ret; + + ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); + + return ret; +} + +static u16 asix_read_rx_ctl(struct usbnet *dev) +{ + __le16 v; + int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v); + + if (ret < 0) { + netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); + goto out; + } + ret = le16_to_cpu(v); +out: + return ret; +} + +static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); + ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", + mode, ret); + + return ret; +} + +static u16 asix_read_medium_status(struct usbnet *dev) +{ + __le16 v; + int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); + + if (ret < 0) { + netdev_err(dev->net, "Error reading Medium Status register: %02x\n", + ret); + return ret; /* TODO: callers not checking for error ret */ + } + + return le16_to_cpu(v); + +} + +static int asix_write_medium_mode(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); + ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", + mode, ret); + + return ret; +} + +static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); + ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", + value, ret); + + if (sleep) + msleep(sleep); + + return ret; +} + +/* + * AX88772 & AX88178 have a 16-bit RX_CTL value + */ +static void asix_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + u16 rx_ctl = AX_DEFAULT_RX_CTL; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= AX_RX_CTL_PRO; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > AX_MAX_MCAST) { + rx_ctl |= AX_RX_CTL_AMALL; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, + AX_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= AX_RX_CTL_AM; + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(netdev); + __le16 res; + + mutex_lock(&dev->phy_mutex); + asix_set_sw_mii(dev); + asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, + (__u16)loc, 2, &res); + asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); + + netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", + phy_id, loc, le16_to_cpu(res)); + + return le16_to_cpu(res); +} + +static void +asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) +{ + struct usbnet *dev = netdev_priv(netdev); + __le16 res = cpu_to_le16(val); + + netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", + phy_id, loc, val); + mutex_lock(&dev->phy_mutex); + asix_set_sw_mii(dev); + asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); + asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); +} + +/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ +static u32 asix_get_phyid(struct usbnet *dev) +{ + int phy_reg; + u32 phy_id; + int i; + + /* Poll for the rare case the FW or phy isn't ready yet. */ + for (i = 0; i < 100; i++) { + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg != 0 && phy_reg != 0xFFFF) + break; + mdelay(1); + } + + if (phy_reg <= 0 || phy_reg == 0xFFFF) + return 0; + + phy_id = (phy_reg & 0xffff) << 16; + + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); + if (phy_reg < 0) + return 0; + + phy_id |= (phy_reg & 0xffff); + + return phy_id; +} + +static void +asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt; + + if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { + wolinfo->supported = 0; + wolinfo->wolopts = 0; + return; + } + wolinfo->supported = WAKE_PHY | WAKE_MAGIC; + wolinfo->wolopts = 0; + if (opt & AX_MONITOR_LINK) + wolinfo->wolopts |= WAKE_PHY; + if (opt & AX_MONITOR_MAGIC) + wolinfo->wolopts |= WAKE_MAGIC; +} + +static int +asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt = 0; + + if (wolinfo->wolopts & WAKE_PHY) + opt |= AX_MONITOR_LINK; + if (wolinfo->wolopts & WAKE_MAGIC) + opt |= AX_MONITOR_MAGIC; + + if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, + opt, 0, 0, NULL) < 0) + return -EINVAL; + + return 0; +} + +static int asix_get_eeprom_len(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + + return data->eeprom_len; +} + +static int asix_get_eeprom(struct net_device *net, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + __le16 *ebuf = (__le16 *)data; + int i; + + /* Crude hack to ensure that we don't overwrite memory + * if an odd length is supplied + */ + if (eeprom->len % 2) + return -EINVAL; + + eeprom->magic = AX_EEPROM_MAGIC; + + /* ax8817x returns 2 bytes from eeprom on read */ + for (i=0; i < eeprom->len / 2; i++) { + if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, + eeprom->offset + i, 0, 2, &ebuf[i]) < 0) + return -EINVAL; + } + return 0; +} + +static void asix_get_drvinfo (struct net_device *net, + struct ethtool_drvinfo *info) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + strncpy (info->driver, DRIVER_NAME, sizeof info->driver); + strncpy (info->version, DRIVER_VERSION, sizeof info->version); + info->eedump_len = data->eeprom_len; +} + +static u32 asix_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + return mii_link_ok(&dev->mii); +} + +static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(net); + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); +} + +static int asix_set_mac_address(struct net_device *net, void *p) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + struct sockaddr *addr = p; + + if (netif_running(net)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); + + /* We use the 20 byte dev->data + * for our 6 byte mac buffer + * to avoid allocating memory that + * is tricky to free later */ + memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); + asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + + return 0; +} + +/* We need to override some ethtool_ops so we require our + own structure so we don't interfere with other usbnet + devices that may be connected at the same time. */ +static const struct ethtool_ops ax88172_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = asix_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static void ax88172_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + u8 rx_ctl = 0x8c; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= 0x01; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > AX_MAX_MCAST) { + rx_ctl |= 0x02; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, + AX_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= 0x10; + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int ax88172_link_reset(struct usbnet *dev) +{ + u8 mode; + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88172_MEDIUM_DEFAULT; + + if (ecmd.duplex != DUPLEX_FULL) + mode |= ~AX88172_MEDIUM_FD; + + netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", + ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + return 0; +} + +static const struct net_device_ops ax88172_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = asix_ioctl, + .ndo_set_rx_mode = ax88172_set_multicast, +}; + +static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret = 0; + u8 buf[ETH_ALEN]; + int i; + unsigned long gpio_bits = dev->driver_info->data; + struct asix_data *data = (struct asix_data *)&dev->data; + + data->eeprom_len = AX88172_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Toggle the GPIOs in a manufacturer/model specific way */ + for (i = 2; i >= 0; i--) { + ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, + (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL); + if (ret < 0) + goto out; + msleep(5); + } + + ret = asix_write_rx_ctl(dev, 0x80); + if (ret < 0) + goto out; + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); + goto out; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x3f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = asix_get_phy_addr(dev); + + dev->net->netdev_ops = &ax88172_netdev_ops; + dev->net->ethtool_ops = &ax88172_ethtool_ops; + dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ + dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); + mii_nway_restart(&dev->mii); + + return 0; + +out: + return ret; +} + +static const struct ethtool_ops ax88772_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = asix_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static int ax88772_link_reset(struct usbnet *dev) +{ + u16 mode; + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88772_MEDIUM_DEFAULT; + + if (ethtool_cmd_speed(&ecmd) != SPEED_100) + mode &= ~AX_MEDIUM_PS; + + if (ecmd.duplex != DUPLEX_FULL) + mode &= ~AX_MEDIUM_FD; + + netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", + ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + return 0; +} + +static int ax88772_reset(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + int ret, embd_phy; + u16 rx_ctl; + + ret = asix_write_gpio(dev, + AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5); + if (ret < 0) + goto out; + + embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); + + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + dbg("Select PHY #1 failed: %d", ret); + goto out; + } + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + goto out; + + msleep(150); + + if (embd_phy) { + ret = asix_sw_reset(dev, AX_SWRESET_IPRL); + if (ret < 0) + goto out; + } else { + ret = asix_sw_reset(dev, AX_SWRESET_PRTE); + if (ret < 0) + goto out; + } + + msleep(150); + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x after software reset", rx_ctl); + ret = asix_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl); + + ret = asix_sw_reset(dev, AX_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA); + mii_nway_restart(&dev->mii); + + ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT); + if (ret < 0) + goto out; + + ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, + AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, + AX88772_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + dbg("Write IPG,IPG1,IPG2 failed: %d", ret); + goto out; + } + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x after all initializations", rx_ctl); + + rx_ctl = asix_read_medium_status(dev); + dbg("Medium Status is 0x%04x after all initializations", rx_ctl); + + return 0; + +out: + return ret; + +} + +static const struct net_device_ops ax88772_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = asix_ioctl, + .ndo_set_rx_mode = asix_set_multicast, +}; + +static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret, embd_phy; + struct asix_data *data = (struct asix_data *)&dev->data; + u8 buf[ETH_ALEN]; + u32 phyid; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + dbg("Failed to read MAC address: %d", ret); + return ret; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = asix_get_phy_addr(dev); + + dev->net->netdev_ops = &ax88772_netdev_ops; + dev->net->ethtool_ops = &ax88772_ethtool_ops; + dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ + dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ + + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); + + /* Reset the PHY to normal operation mode */ + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + dbg("Select PHY #1 failed: %d", ret); + return ret; + } + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); + if (ret < 0) + return ret; + + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + return ret; + + msleep(150); + + ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); + + /* Read PHYID register *AFTER* the PHY was reset properly */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + + return 0; +} + +static const struct ethtool_ops ax88178_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = asix_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static int marvell_phy_init(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + u16 reg; + + netdev_dbg(dev->net, "marvell_phy_init()\n"); + + reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS); + netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg); + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL, + MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY); + + if (data->ledmode) { + reg = asix_mdio_read(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL); + netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg); + + reg &= 0xf8ff; + reg |= (1 + 0x0100); + asix_mdio_write(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL, reg); + + reg = asix_mdio_read(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL); + netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg); + reg &= 0xfc0f; + } + + return 0; +} + +static int rtl8211cl_phy_init(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + + netdev_dbg(dev->net, "rtl8211cl_phy_init()\n"); + + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x01, + asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); + + if (data->ledmode == 12) { + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); + } + + return 0; +} + +static int marvell_led_status(struct usbnet *dev, u16 speed) +{ + u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL); + + netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg); + + /* Clear out the center LED bits - 0x03F0 */ + reg &= 0xfc0f; + + switch (speed) { + case SPEED_1000: + reg |= 0x03e0; + break; + case SPEED_100: + reg |= 0x03b0; + break; + default: + reg |= 0x02f0; + } + + netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg); + asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg); + + return 0; +} + +static int ax88178_reset(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + int ret; + __le16 eeprom; + u8 status; + int gpio0 = 0; + u32 phyid; + + asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); + dbg("GPIO Status: 0x%04x", status); + + asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); + asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); + asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); + + dbg("EEPROM index 0x17 is 0x%04x", eeprom); + + if (eeprom == cpu_to_le16(0xffff)) { + data->phymode = PHY_MODE_MARVELL; + data->ledmode = 0; + gpio0 = 1; + } else { + data->phymode = le16_to_cpu(eeprom) & 0x7F; + data->ledmode = le16_to_cpu(eeprom) >> 8; + gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; + } + dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); + + /* Power up external GigaPHY through AX88178 GPIO pin */ + asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); + if ((le16_to_cpu(eeprom) >> 8) != 1) { + asix_write_gpio(dev, 0x003c, 30); + asix_write_gpio(dev, 0x001c, 300); + asix_write_gpio(dev, 0x003c, 30); + } else { + dbg("gpio phymode == 1 path"); + asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); + asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); + } + + /* Read PHYID register *AFTER* powering up PHY */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ + asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); + + asix_sw_reset(dev, 0); + msleep(150); + + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + msleep(150); + + asix_write_rx_ctl(dev, 0); + + if (data->phymode == PHY_MODE_MARVELL) { + marvell_phy_init(dev); + msleep(60); + } else if (data->phymode == PHY_MODE_RTL8211CL) + rtl8211cl_phy_init(dev); + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, + BMCR_RESET | BMCR_ANENABLE); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); + + mii_nway_restart(&dev->mii); + + ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT); + if (ret < 0) + return ret; + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + return ret; + + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + if (ret < 0) + return ret; + + return 0; +} + +static int ax88178_link_reset(struct usbnet *dev) +{ + u16 mode; + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + struct asix_data *data = (struct asix_data *)&dev->data; + u32 speed; + + netdev_dbg(dev->net, "ax88178_link_reset()\n"); + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88178_MEDIUM_DEFAULT; + speed = ethtool_cmd_speed(&ecmd); + + if (speed == SPEED_1000) + mode |= AX_MEDIUM_GM; + else if (speed == SPEED_100) + mode |= AX_MEDIUM_PS; + else + mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); + + mode |= AX_MEDIUM_ENCK; + + if (ecmd.duplex == DUPLEX_FULL) + mode |= AX_MEDIUM_FD; + else + mode &= ~AX_MEDIUM_FD; + + netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", + speed, ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + if (data->phymode == PHY_MODE_MARVELL && data->ledmode) + marvell_led_status(dev, speed); + + return 0; +} + +static void ax88178_set_mfb(struct usbnet *dev) +{ + u16 mfb = AX_RX_CTL_MFB_16384; + u16 rxctl; + u16 medium; + int old_rx_urb_size = dev->rx_urb_size; + + if (dev->hard_mtu < 2048) { + dev->rx_urb_size = 2048; + mfb = AX_RX_CTL_MFB_2048; + } else if (dev->hard_mtu < 4096) { + dev->rx_urb_size = 4096; + mfb = AX_RX_CTL_MFB_4096; + } else if (dev->hard_mtu < 8192) { + dev->rx_urb_size = 8192; + mfb = AX_RX_CTL_MFB_8192; + } else if (dev->hard_mtu < 16384) { + dev->rx_urb_size = 16384; + mfb = AX_RX_CTL_MFB_16384; + } + + rxctl = asix_read_rx_ctl(dev); + asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb); + + medium = asix_read_medium_status(dev); + if (dev->net->mtu > 1500) + medium |= AX_MEDIUM_JFE; + else + medium &= ~AX_MEDIUM_JFE; + asix_write_medium_mode(dev, medium); + + if (dev->rx_urb_size > old_rx_urb_size) + usbnet_unlink_rx_urbs(dev); +} + +static int ax88178_change_mtu(struct net_device *net, int new_mtu) +{ + struct usbnet *dev = netdev_priv(net); + int ll_mtu = new_mtu + net->hard_header_len + 4; + + netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu); + + if (new_mtu <= 0 || ll_mtu > 16384) + return -EINVAL; + + if ((ll_mtu % dev->maxpacket) == 0) + return -EDOM; + + net->mtu = new_mtu; + dev->hard_mtu = net->mtu + net->hard_header_len; + ax88178_set_mfb(dev); + + return 0; +} + +static const struct net_device_ops ax88178_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = asix_set_multicast, + .ndo_do_ioctl = asix_ioctl, + .ndo_change_mtu = ax88178_change_mtu, +}; + +static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + u8 buf[ETH_ALEN]; + struct asix_data *data = (struct asix_data *)&dev->data; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + dbg("Failed to read MAC address: %d", ret); + return ret; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0xff; + dev->mii.supports_gmii = 1; + dev->mii.phy_id = asix_get_phy_addr(dev); + + dev->net->netdev_ops = &ax88178_netdev_ops; + dev->net->ethtool_ops = &ax88178_ethtool_ops; + + /* Blink LEDS so users know driver saw dongle */ + asix_sw_reset(dev, 0); + msleep(150); + + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + msleep(150); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + + return 0; +} + +static const struct driver_info ax8817x_info = { + .description = "ASIX AX8817x USB 2.0 Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x00130103, +}; + +static const struct driver_info dlink_dub_e100_info = { + .description = "DLink DUB-E100 USB Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x009f9d9f, +}; + +static const struct driver_info netgear_fa120_info = { + .description = "Netgear FA-120 USB Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x00130103, +}; + +static const struct driver_info hawking_uf200_info = { + .description = "Hawking UF200 USB Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x001f1d1f, +}; + +static const struct driver_info ax88772_info = { + .description = "ASIX AX88772 USB 2.0 Ethernet", + .bind = ax88772_bind, + .status = asix_status, + .link_reset = ax88772_link_reset, + .reset = ax88772_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; + +static const struct driver_info ax88178_info = { + .description = "ASIX AX88178 USB 2.0 Ethernet", + .bind = ax88178_bind, + .status = asix_status, + .link_reset = ax88178_link_reset, + .reset = ax88178_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; + +static const struct usb_device_id products [] = { +{ + // Linksys USB200M + USB_DEVICE (0x077b, 0x2226), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Netgear FA120 + USB_DEVICE (0x0846, 0x1040), + .driver_info = (unsigned long) &netgear_fa120_info, +}, { + // DLink DUB-E100 + USB_DEVICE (0x2001, 0x1a00), + .driver_info = (unsigned long) &dlink_dub_e100_info, +}, { + // Intellinet, ST Lab USB Ethernet + USB_DEVICE (0x0b95, 0x1720), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Hawking UF200, TrendNet TU2-ET100 + USB_DEVICE (0x07b8, 0x420a), + .driver_info = (unsigned long) &hawking_uf200_info, +}, { + // Billionton Systems, USB2AR + USB_DEVICE (0x08dd, 0x90ff), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // ATEN UC210T + USB_DEVICE (0x0557, 0x2009), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Buffalo LUA-U2-KTX + USB_DEVICE (0x0411, 0x003d), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Buffalo LUA-U2-GT 10/100/1000 + USB_DEVICE (0x0411, 0x006e), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter" + USB_DEVICE (0x6189, 0x182d), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter" + USB_DEVICE (0x0df6, 0x0056), + .driver_info = (unsigned long) &ax88178_info, +}, { + // corega FEther USB2-TX + USB_DEVICE (0x07aa, 0x0017), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Surecom EP-1427X-2 + USB_DEVICE (0x1189, 0x0893), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // goodway corp usb gwusb2e + USB_DEVICE (0x1631, 0x6200), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // JVC MP-PRX1 Port Replicator + USB_DEVICE (0x04f1, 0x3008), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // ASIX AX88772B 10/100 + USB_DEVICE (0x0b95, 0x772b), + .driver_info = (unsigned long) &ax88772_info, +}, { + // ASIX AX88772 10/100 + USB_DEVICE (0x0b95, 0x7720), + .driver_info = (unsigned long) &ax88772_info, +}, { + // ASIX AX88178 10/100/1000 + USB_DEVICE (0x0b95, 0x1780), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Logitec LAN-GTJ/U2A + USB_DEVICE (0x0789, 0x0160), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Linksys USB200M Rev 2 + USB_DEVICE (0x13b1, 0x0018), + .driver_info = (unsigned long) &ax88772_info, +}, { + // 0Q0 cable ethernet + USB_DEVICE (0x1557, 0x7720), + .driver_info = (unsigned long) &ax88772_info, +}, { + // DLink DUB-E100 H/W Ver B1 + USB_DEVICE (0x07d1, 0x3c05), + .driver_info = (unsigned long) &ax88772_info, +}, { + // DLink DUB-E100 H/W Ver B1 Alternate + USB_DEVICE (0x2001, 0x3c05), + .driver_info = (unsigned long) &ax88772_info, +}, { + // Linksys USB1000 + USB_DEVICE (0x1737, 0x0039), + .driver_info = (unsigned long) &ax88178_info, +}, { + // IO-DATA ETG-US2 + USB_DEVICE (0x04bb, 0x0930), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Belkin F5D5055 + USB_DEVICE(0x050d, 0x5055), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Apple USB Ethernet Adapter + USB_DEVICE(0x05ac, 0x1402), + .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, +}, { + // ABOCOM for pci + USB_DEVICE(0x14ea, 0xab11), + .driver_info = (unsigned long) &ax88178_info, +}, { + // ASIX 88772a + USB_DEVICE(0x0db0, 0xa877), + .driver_info = (unsigned long) &ax88772_info, +}, { + // Asus USB Ethernet Adapter + USB_DEVICE (0x0b95, 0x7e2b), + .driver_info = (unsigned long) &ax88772_info, +}, + { }, // END +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver asix_driver = { + .name = DRIVER_NAME, + .id_table = products, + .probe = usbnet_probe, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .disconnect = usbnet_disconnect, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(asix_driver); + +MODULE_AUTHOR("David Hollis"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices"); +MODULE_LICENSE("GPL"); + -- cgit v1.2.3 From 607740bc1605395c96b09416cdcc5e77c8976eed Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Fri, 13 Jul 2012 05:26:30 +0000 Subject: asix: Factor out common code Allow the new driver for the AX88172A to share code with the existing drivers for ASIX devices. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller --- drivers/net/usb/Makefile | 2 +- drivers/net/usb/asix.h | 1532 +--------------------------------------- drivers/net/usb/asix_common.c | 1203 +------------------------------ drivers/net/usb/asix_devices.c | 660 +---------------- 4 files changed, 64 insertions(+), 3333 deletions(-) (limited to 'drivers/net/usb/asix.h') diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 2c8f7b4a5d8c..a9490d9a4e98 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_USB_PEGASUS) += pegasus.o obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o -asix-y := asix_devices.o +asix-y := asix_devices.o asix_common.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h index 6564c32d3af0..790af241f197 100644 --- a/drivers/net/usb/asix.h +++ b/drivers/net/usb/asix.h @@ -20,6 +20,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#ifndef _ASIX_H +#define _ASIX_H + // #define DEBUG // error path messages, extra info // #define VERBOSE // more; success messages @@ -152,20 +155,6 @@ #define AX88172_EEPROM_LEN 0x40 #define AX88772_EEPROM_LEN 0xff -#define PHY_MODE_MARVELL 0x0000 -#define MII_MARVELL_LED_CTRL 0x0018 -#define MII_MARVELL_STATUS 0x001b -#define MII_MARVELL_CTRL 0x0014 - -#define MARVELL_LED_MANUAL 0x0019 - -#define MARVELL_STATUS_HWCFG 0x0004 - -#define MARVELL_CTRL_TXDELAY 0x0002 -#define MARVELL_CTRL_RXDELAY 0x0080 - -#define PHY_MODE_RTL8211CL 0x000C - /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ struct asix_data { u8 multi_filter[AX_MCAST_FILTER_SIZE]; @@ -175,1506 +164,49 @@ struct asix_data { u8 eeprom_len; }; -struct ax88172_int_data { - __le16 res1; - u8 link; - __le16 res2; - u8 status; - __le16 res3; -} __packed; - -static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - void *buf; - int err = -ENOMEM; - - netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - buf = kmalloc(size, GFP_KERNEL); - if (!buf) - goto out; - - err = usb_control_msg( - dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - cmd, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, - index, - buf, - size, - USB_CTRL_GET_TIMEOUT); - if (err == size) - memcpy(data, buf, size); - else if (err >= 0) - err = -EINVAL; - kfree(buf); - -out: - return err; -} - -static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - void *buf = NULL; - int err = -ENOMEM; - - netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - if (data) { - buf = kmemdup(data, size, GFP_KERNEL); - if (!buf) - goto out; - } - - err = usb_control_msg( - dev->udev, - usb_sndctrlpipe(dev->udev, 0), - cmd, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, - index, - buf, - size, - USB_CTRL_SET_TIMEOUT); - kfree(buf); - -out: - return err; -} - -static void asix_async_cmd_callback(struct urb *urb) -{ - struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; - int status = urb->status; - - if (status < 0) - printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d", - status); - - kfree(req); - usb_free_urb(urb); -} - -static void -asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - struct usb_ctrlrequest *req; - int status; - struct urb *urb; - - netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n"); - return; - } - - req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); - if (!req) { - netdev_err(dev->net, "Failed to allocate memory for control request\n"); - usb_free_urb(urb); - return; - } - - req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; - req->bRequest = cmd; - req->wValue = cpu_to_le16(value); - req->wIndex = cpu_to_le16(index); - req->wLength = cpu_to_le16(size); - - usb_fill_control_urb(urb, dev->udev, - usb_sndctrlpipe(dev->udev, 0), - (void *)req, data, size, - asix_async_cmd_callback, req); - - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status < 0) { - netdev_err(dev->net, "Error submitting the control message: status=%d\n", - status); - kfree(req); - usb_free_urb(urb); - } -} - -static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) -{ - int offset = 0; - - while (offset + sizeof(u32) < skb->len) { - struct sk_buff *ax_skb; - u16 size; - u32 header = get_unaligned_le32(skb->data + offset); - - offset += sizeof(u32); - - /* get the packet length */ - size = (u16) (header & 0x7ff); - if (size != ((~header >> 16) & 0x07ff)) { - netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n"); - return 0; - } - - if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || - (size + offset > skb->len)) { - netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n", - size); - return 0; - } - ax_skb = netdev_alloc_skb_ip_align(dev->net, size); - if (!ax_skb) - return 0; - - skb_put(ax_skb, size); - memcpy(ax_skb->data, skb->data + offset, size); - usbnet_skb_return(dev, ax_skb); - - offset += (size + 1) & 0xfffe; - } - - if (skb->len != offset) { - netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n", - skb->len); - return 0; - } - return 1; -} - -static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, - gfp_t flags) -{ - int padlen; - int headroom = skb_headroom(skb); - int tailroom = skb_tailroom(skb); - u32 packet_len; - u32 padbytes = 0xffff0000; - - padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; - - /* We need to push 4 bytes in front of frame (packet_len) - * and maybe add 4 bytes after the end (if padlen is 4) - * - * Avoid skb_copy_expand() expensive call, using following rules : - * - We are allowed to push 4 bytes in headroom if skb_header_cloned() - * is false (and if we have 4 bytes of headroom) - * - We are allowed to put 4 bytes at tail if skb_cloned() - * is false (and if we have 4 bytes of tailroom) - * - * TCP packets for example are cloned, but skb_header_release() - * was called in tcp stack, allowing us to use headroom for our needs. - */ - if (!skb_header_cloned(skb) && - !(padlen && skb_cloned(skb)) && - headroom + tailroom >= 4 + padlen) { - /* following should not happen, but better be safe */ - if (headroom < 4 || - tailroom < padlen) { - skb->data = memmove(skb->head + 4, skb->data, skb->len); - skb_set_tail_pointer(skb, skb->len); - } - } else { - struct sk_buff *skb2; - - skb2 = skb_copy_expand(skb, 4, padlen, flags); - dev_kfree_skb_any(skb); - skb = skb2; - if (!skb) - return NULL; - } - - packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; - skb_push(skb, 4); - cpu_to_le32s(&packet_len); - skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); - - if (padlen) { - cpu_to_le32s(&padbytes); - memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); - skb_put(skb, sizeof(padbytes)); - } - return skb; -} - -static void asix_status(struct usbnet *dev, struct urb *urb) -{ - struct ax88172_int_data *event; - int link; - - if (urb->actual_length < 8) - return; - - event = urb->transfer_buffer; - link = event->link & 0x01; - if (netif_carrier_ok(dev->net) != link) { - if (link) { - netif_carrier_on(dev->net); - usbnet_defer_kevent (dev, EVENT_LINK_RESET ); - } else - netif_carrier_off(dev->net); - netdev_dbg(dev->net, "Link Status is: %d\n", link); - } -} - -static inline int asix_set_sw_mii(struct usbnet *dev) -{ - int ret; - ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to enable software MII access\n"); - return ret; -} - -static inline int asix_set_hw_mii(struct usbnet *dev) -{ - int ret; - ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to enable hardware MII access\n"); - return ret; -} - -static inline int asix_get_phy_addr(struct usbnet *dev) -{ - u8 buf[2]; - int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); - - netdev_dbg(dev->net, "asix_get_phy_addr()\n"); - - if (ret < 0) { - netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); - goto out; - } - netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", - *((__le16 *)buf)); - ret = buf[1]; - -out: - return ret; -} - -static int asix_sw_reset(struct usbnet *dev, u8 flags) -{ - int ret; - - ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); - - return ret; -} - -static u16 asix_read_rx_ctl(struct usbnet *dev) -{ - __le16 v; - int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v); - - if (ret < 0) { - netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); - goto out; - } - ret = le16_to_cpu(v); -out: - return ret; -} - -static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); - ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", - mode, ret); - - return ret; -} - -static u16 asix_read_medium_status(struct usbnet *dev) -{ - __le16 v; - int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); - - if (ret < 0) { - netdev_err(dev->net, "Error reading Medium Status register: %02x\n", - ret); - return ret; /* TODO: callers not checking for error ret */ - } - - return le16_to_cpu(v); - -} - -static int asix_write_medium_mode(struct usbnet *dev, u16 mode) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); - ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", - mode, ret); - - return ret; -} - -static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); - ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", - value, ret); - - if (sleep) - msleep(sleep); - - return ret; -} - -/* - * AX88772 & AX88178 have a 16-bit RX_CTL value - */ -static void asix_set_multicast(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - u16 rx_ctl = AX_DEFAULT_RX_CTL; - - if (net->flags & IFF_PROMISC) { - rx_ctl |= AX_RX_CTL_PRO; - } else if (net->flags & IFF_ALLMULTI || - netdev_mc_count(net) > AX_MAX_MCAST) { - rx_ctl |= AX_RX_CTL_AMALL; - } else if (netdev_mc_empty(net)) { - /* just broadcast and directed */ - } else { - /* We use the 20 byte dev->data - * for our 8 byte filter buffer - * to avoid allocating memory that - * is tricky to free later */ - struct netdev_hw_addr *ha; - u32 crc_bits; - - memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); - - /* Build the multicast hash filter. */ - netdev_for_each_mc_addr(ha, net) { - crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; - data->multi_filter[crc_bits >> 3] |= - 1 << (crc_bits & 7); - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, - AX_MCAST_FILTER_SIZE, data->multi_filter); - - rx_ctl |= AX_RX_CTL_AM; - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); -} - -static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) -{ - struct usbnet *dev = netdev_priv(netdev); - __le16 res; - - mutex_lock(&dev->phy_mutex); - asix_set_sw_mii(dev); - asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, - (__u16)loc, 2, &res); - asix_set_hw_mii(dev); - mutex_unlock(&dev->phy_mutex); - - netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", - phy_id, loc, le16_to_cpu(res)); - - return le16_to_cpu(res); -} - -static void -asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) -{ - struct usbnet *dev = netdev_priv(netdev); - __le16 res = cpu_to_le16(val); - - netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", - phy_id, loc, val); - mutex_lock(&dev->phy_mutex); - asix_set_sw_mii(dev); - asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); - asix_set_hw_mii(dev); - mutex_unlock(&dev->phy_mutex); -} - -/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ -static u32 asix_get_phyid(struct usbnet *dev) -{ - int phy_reg; - u32 phy_id; - int i; - - /* Poll for the rare case the FW or phy isn't ready yet. */ - for (i = 0; i < 100; i++) { - phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); - if (phy_reg != 0 && phy_reg != 0xFFFF) - break; - mdelay(1); - } - - if (phy_reg <= 0 || phy_reg == 0xFFFF) - return 0; - - phy_id = (phy_reg & 0xffff) << 16; - - phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); - if (phy_reg < 0) - return 0; - - phy_id |= (phy_reg & 0xffff); - - return phy_id; -} - -static void -asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) -{ - struct usbnet *dev = netdev_priv(net); - u8 opt; - - if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { - wolinfo->supported = 0; - wolinfo->wolopts = 0; - return; - } - wolinfo->supported = WAKE_PHY | WAKE_MAGIC; - wolinfo->wolopts = 0; - if (opt & AX_MONITOR_LINK) - wolinfo->wolopts |= WAKE_PHY; - if (opt & AX_MONITOR_MAGIC) - wolinfo->wolopts |= WAKE_MAGIC; -} - -static int -asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) -{ - struct usbnet *dev = netdev_priv(net); - u8 opt = 0; - - if (wolinfo->wolopts & WAKE_PHY) - opt |= AX_MONITOR_LINK; - if (wolinfo->wolopts & WAKE_MAGIC) - opt |= AX_MONITOR_MAGIC; - - if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, - opt, 0, 0, NULL) < 0) - return -EINVAL; - - return 0; -} - -static int asix_get_eeprom_len(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - - return data->eeprom_len; -} - -static int asix_get_eeprom(struct net_device *net, - struct ethtool_eeprom *eeprom, u8 *data) -{ - struct usbnet *dev = netdev_priv(net); - __le16 *ebuf = (__le16 *)data; - int i; - - /* Crude hack to ensure that we don't overwrite memory - * if an odd length is supplied - */ - if (eeprom->len % 2) - return -EINVAL; - - eeprom->magic = AX_EEPROM_MAGIC; - - /* ax8817x returns 2 bytes from eeprom on read */ - for (i=0; i < eeprom->len / 2; i++) { - if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, - eeprom->offset + i, 0, 2, &ebuf[i]) < 0) - return -EINVAL; - } - return 0; -} - -static void asix_get_drvinfo (struct net_device *net, - struct ethtool_drvinfo *info) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - - /* Inherit standard device info */ - usbnet_get_drvinfo(net, info); - strncpy (info->driver, DRIVER_NAME, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - info->eedump_len = data->eeprom_len; -} - -static u32 asix_get_link(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - - return mii_link_ok(&dev->mii); -} - -static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) -{ - struct usbnet *dev = netdev_priv(net); - - return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); -} - -static int asix_set_mac_address(struct net_device *net, void *p) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - struct sockaddr *addr = p; - - if (netif_running(net)) - return -EBUSY; - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); - - /* We use the 20 byte dev->data - * for our 6 byte mac buffer - * to avoid allocating memory that - * is tricky to free later */ - memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); - asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); - - return 0; -} - -/* We need to override some ethtool_ops so we require our - own structure so we don't interfere with other usbnet - devices that may be connected at the same time. */ -static const struct ethtool_ops ax88172_ethtool_ops = { - .get_drvinfo = asix_get_drvinfo, - .get_link = asix_get_link, - .get_msglevel = usbnet_get_msglevel, - .set_msglevel = usbnet_set_msglevel, - .get_wol = asix_get_wol, - .set_wol = asix_set_wol, - .get_eeprom_len = asix_get_eeprom_len, - .get_eeprom = asix_get_eeprom, - .get_settings = usbnet_get_settings, - .set_settings = usbnet_set_settings, - .nway_reset = usbnet_nway_reset, -}; - -static void ax88172_set_multicast(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - u8 rx_ctl = 0x8c; - - if (net->flags & IFF_PROMISC) { - rx_ctl |= 0x01; - } else if (net->flags & IFF_ALLMULTI || - netdev_mc_count(net) > AX_MAX_MCAST) { - rx_ctl |= 0x02; - } else if (netdev_mc_empty(net)) { - /* just broadcast and directed */ - } else { - /* We use the 20 byte dev->data - * for our 8 byte filter buffer - * to avoid allocating memory that - * is tricky to free later */ - struct netdev_hw_addr *ha; - u32 crc_bits; - - memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); +int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data); - /* Build the multicast hash filter. */ - netdev_for_each_mc_addr(ha, net) { - crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; - data->multi_filter[crc_bits >> 3] |= - 1 << (crc_bits & 7); - } +int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data); - asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, - AX_MCAST_FILTER_SIZE, data->multi_filter); +void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, + u16 index, u16 size, void *data); - rx_ctl |= 0x10; - } +int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb); - asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); -} +struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags); -static int ax88172_link_reset(struct usbnet *dev) -{ - u8 mode; - struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; +int asix_set_sw_mii(struct usbnet *dev); +int asix_set_hw_mii(struct usbnet *dev); - mii_check_media(&dev->mii, 1, 1); - mii_ethtool_gset(&dev->mii, &ecmd); - mode = AX88172_MEDIUM_DEFAULT; +int asix_get_phy_addr(struct usbnet *dev); - if (ecmd.duplex != DUPLEX_FULL) - mode |= ~AX88172_MEDIUM_FD; +int asix_sw_reset(struct usbnet *dev, u8 flags); - netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", - ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); +u16 asix_read_rx_ctl(struct usbnet *dev); +int asix_write_rx_ctl(struct usbnet *dev, u16 mode); - asix_write_medium_mode(dev, mode); - - return 0; -} - -static const struct net_device_ops ax88172_netdev_ops = { - .ndo_open = usbnet_open, - .ndo_stop = usbnet_stop, - .ndo_start_xmit = usbnet_start_xmit, - .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_change_mtu = usbnet_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, - .ndo_do_ioctl = asix_ioctl, - .ndo_set_rx_mode = ax88172_set_multicast, -}; - -static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int ret = 0; - u8 buf[ETH_ALEN]; - int i; - unsigned long gpio_bits = dev->driver_info->data; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88172_EEPROM_LEN; - - usbnet_get_endpoints(dev,intf); - - /* Toggle the GPIOs in a manufacturer/model specific way */ - for (i = 2; i >= 0; i--) { - ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, - (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL); - if (ret < 0) - goto out; - msleep(5); - } - - ret = asix_write_rx_ctl(dev, 0x80); - if (ret < 0) - goto out; - - /* Get the MAC address */ - ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); - if (ret < 0) { - dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); - goto out; - } - memcpy(dev->net->dev_addr, buf, ETH_ALEN); - - /* Initialize MII structure */ - dev->mii.dev = dev->net; - dev->mii.mdio_read = asix_mdio_read; - dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0x3f; - dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = asix_get_phy_addr(dev); - - dev->net->netdev_ops = &ax88172_netdev_ops; - dev->net->ethtool_ops = &ax88172_ethtool_ops; - dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ - dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); - mii_nway_restart(&dev->mii); - - return 0; - -out: - return ret; -} - -static const struct ethtool_ops ax88772_ethtool_ops = { - .get_drvinfo = asix_get_drvinfo, - .get_link = asix_get_link, - .get_msglevel = usbnet_get_msglevel, - .set_msglevel = usbnet_set_msglevel, - .get_wol = asix_get_wol, - .set_wol = asix_set_wol, - .get_eeprom_len = asix_get_eeprom_len, - .get_eeprom = asix_get_eeprom, - .get_settings = usbnet_get_settings, - .set_settings = usbnet_set_settings, - .nway_reset = usbnet_nway_reset, -}; +u16 asix_read_medium_status(struct usbnet *dev); +int asix_write_medium_mode(struct usbnet *dev, u16 mode); -static int ax88772_link_reset(struct usbnet *dev) -{ - u16 mode; - struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; +int asix_write_gpio(struct usbnet *dev, u16 value, int sleep); - mii_check_media(&dev->mii, 1, 1); - mii_ethtool_gset(&dev->mii, &ecmd); - mode = AX88772_MEDIUM_DEFAULT; +void asix_set_multicast(struct net_device *net); - if (ethtool_cmd_speed(&ecmd) != SPEED_100) - mode &= ~AX_MEDIUM_PS; +int asix_mdio_read(struct net_device *netdev, int phy_id, int loc); +void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val); - if (ecmd.duplex != DUPLEX_FULL) - mode &= ~AX_MEDIUM_FD; +void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo); +int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo); - netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", - ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); - - asix_write_medium_mode(dev, mode); - - return 0; -} - -static int ax88772_reset(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - int ret, embd_phy; - u16 rx_ctl; - - ret = asix_write_gpio(dev, - AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5); - if (ret < 0) - goto out; - - embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); - - ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); - if (ret < 0) { - dbg("Select PHY #1 failed: %d", ret); - goto out; - } - - ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); - if (ret < 0) - goto out; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); - if (ret < 0) - goto out; - - msleep(150); - - if (embd_phy) { - ret = asix_sw_reset(dev, AX_SWRESET_IPRL); - if (ret < 0) - goto out; - } else { - ret = asix_sw_reset(dev, AX_SWRESET_PRTE); - if (ret < 0) - goto out; - } - - msleep(150); - rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x after software reset", rx_ctl); - ret = asix_write_rx_ctl(dev, 0x0000); - if (ret < 0) - goto out; - - rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl); - - ret = asix_sw_reset(dev, AX_SWRESET_PRL); - if (ret < 0) - goto out; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL); - if (ret < 0) - goto out; - - msleep(150); - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA); - mii_nway_restart(&dev->mii); - - ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT); - if (ret < 0) - goto out; - - ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, - AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, - AX88772_IPG2_DEFAULT, 0, NULL); - if (ret < 0) { - dbg("Write IPG,IPG1,IPG2 failed: %d", ret); - goto out; - } - - /* Rewrite MAC address */ - memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); - ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); - if (ret < 0) - goto out; - - /* Set RX_CTL to default values with 2k buffer, and enable cactus */ - ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); - if (ret < 0) - goto out; - - rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x after all initializations", rx_ctl); - - rx_ctl = asix_read_medium_status(dev); - dbg("Medium Status is 0x%04x after all initializations", rx_ctl); - - return 0; - -out: - return ret; - -} - -static const struct net_device_ops ax88772_netdev_ops = { - .ndo_open = usbnet_open, - .ndo_stop = usbnet_stop, - .ndo_start_xmit = usbnet_start_xmit, - .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_change_mtu = usbnet_change_mtu, - .ndo_set_mac_address = asix_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_do_ioctl = asix_ioctl, - .ndo_set_rx_mode = asix_set_multicast, -}; - -static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int ret, embd_phy; - struct asix_data *data = (struct asix_data *)&dev->data; - u8 buf[ETH_ALEN]; - u32 phyid; - - data->eeprom_len = AX88772_EEPROM_LEN; - - usbnet_get_endpoints(dev,intf); - - /* Get the MAC address */ - ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); - if (ret < 0) { - dbg("Failed to read MAC address: %d", ret); - return ret; - } - memcpy(dev->net->dev_addr, buf, ETH_ALEN); - - /* Initialize MII structure */ - dev->mii.dev = dev->net; - dev->mii.mdio_read = asix_mdio_read; - dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0x1f; - dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = asix_get_phy_addr(dev); - - dev->net->netdev_ops = &ax88772_netdev_ops; - dev->net->ethtool_ops = &ax88772_ethtool_ops; - dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ - dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ - - embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); - - /* Reset the PHY to normal operation mode */ - ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); - if (ret < 0) { - dbg("Select PHY #1 failed: %d", ret); - return ret; - } - - ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); - - /* Read PHYID register *AFTER* the PHY was reset properly */ - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); - - /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ - if (dev->driver_info->flags & FLAG_FRAMING_AX) { - /* hard_mtu is still the default - the device does not support - jumbo eth frames */ - dev->rx_urb_size = 2048; - } - - return 0; -} - -static const struct ethtool_ops ax88178_ethtool_ops = { - .get_drvinfo = asix_get_drvinfo, - .get_link = asix_get_link, - .get_msglevel = usbnet_get_msglevel, - .set_msglevel = usbnet_set_msglevel, - .get_wol = asix_get_wol, - .set_wol = asix_set_wol, - .get_eeprom_len = asix_get_eeprom_len, - .get_eeprom = asix_get_eeprom, - .get_settings = usbnet_get_settings, - .set_settings = usbnet_set_settings, - .nway_reset = usbnet_nway_reset, -}; - -static int marvell_phy_init(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - u16 reg; - - netdev_dbg(dev->net, "marvell_phy_init()\n"); - - reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS); - netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg); - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL, - MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY); - - if (data->ledmode) { - reg = asix_mdio_read(dev->net, dev->mii.phy_id, - MII_MARVELL_LED_CTRL); - netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg); - - reg &= 0xf8ff; - reg |= (1 + 0x0100); - asix_mdio_write(dev->net, dev->mii.phy_id, - MII_MARVELL_LED_CTRL, reg); - - reg = asix_mdio_read(dev->net, dev->mii.phy_id, - MII_MARVELL_LED_CTRL); - netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg); - reg &= 0xfc0f; - } - - return 0; -} - -static int rtl8211cl_phy_init(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - - netdev_dbg(dev->net, "rtl8211cl_phy_init()\n"); - - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x01, - asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); - - if (data->ledmode == 12) { - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); - } - - return 0; -} - -static int marvell_led_status(struct usbnet *dev, u16 speed) -{ - u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL); - - netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg); - - /* Clear out the center LED bits - 0x03F0 */ - reg &= 0xfc0f; - - switch (speed) { - case SPEED_1000: - reg |= 0x03e0; - break; - case SPEED_100: - reg |= 0x03b0; - break; - default: - reg |= 0x02f0; - } - - netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg); - asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg); - - return 0; -} - -static int ax88178_reset(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - int ret; - __le16 eeprom; - u8 status; - int gpio0 = 0; - u32 phyid; - - asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); - dbg("GPIO Status: 0x%04x", status); - - asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); - asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); - asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); - - dbg("EEPROM index 0x17 is 0x%04x", eeprom); - - if (eeprom == cpu_to_le16(0xffff)) { - data->phymode = PHY_MODE_MARVELL; - data->ledmode = 0; - gpio0 = 1; - } else { - data->phymode = le16_to_cpu(eeprom) & 0x7F; - data->ledmode = le16_to_cpu(eeprom) >> 8; - gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; - } - dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); - - /* Power up external GigaPHY through AX88178 GPIO pin */ - asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); - if ((le16_to_cpu(eeprom) >> 8) != 1) { - asix_write_gpio(dev, 0x003c, 30); - asix_write_gpio(dev, 0x001c, 300); - asix_write_gpio(dev, 0x003c, 30); - } else { - dbg("gpio phymode == 1 path"); - asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); - asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); - } - - /* Read PHYID register *AFTER* powering up PHY */ - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); - - /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ - asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); - - asix_sw_reset(dev, 0); - msleep(150); - - asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); - msleep(150); - - asix_write_rx_ctl(dev, 0); - - if (data->phymode == PHY_MODE_MARVELL) { - marvell_phy_init(dev); - msleep(60); - } else if (data->phymode == PHY_MODE_RTL8211CL) - rtl8211cl_phy_init(dev); - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, - ADVERTISE_1000FULL); - - mii_nway_restart(&dev->mii); - - ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT); - if (ret < 0) - return ret; - - /* Rewrite MAC address */ - memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); - ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); - if (ret < 0) - return ret; - - ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); - if (ret < 0) - return ret; - - return 0; -} - -static int ax88178_link_reset(struct usbnet *dev) -{ - u16 mode; - struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; - struct asix_data *data = (struct asix_data *)&dev->data; - u32 speed; - - netdev_dbg(dev->net, "ax88178_link_reset()\n"); - - mii_check_media(&dev->mii, 1, 1); - mii_ethtool_gset(&dev->mii, &ecmd); - mode = AX88178_MEDIUM_DEFAULT; - speed = ethtool_cmd_speed(&ecmd); - - if (speed == SPEED_1000) - mode |= AX_MEDIUM_GM; - else if (speed == SPEED_100) - mode |= AX_MEDIUM_PS; - else - mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); - - mode |= AX_MEDIUM_ENCK; - - if (ecmd.duplex == DUPLEX_FULL) - mode |= AX_MEDIUM_FD; - else - mode &= ~AX_MEDIUM_FD; - - netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", - speed, ecmd.duplex, mode); - - asix_write_medium_mode(dev, mode); - - if (data->phymode == PHY_MODE_MARVELL && data->ledmode) - marvell_led_status(dev, speed); - - return 0; -} - -static void ax88178_set_mfb(struct usbnet *dev) -{ - u16 mfb = AX_RX_CTL_MFB_16384; - u16 rxctl; - u16 medium; - int old_rx_urb_size = dev->rx_urb_size; - - if (dev->hard_mtu < 2048) { - dev->rx_urb_size = 2048; - mfb = AX_RX_CTL_MFB_2048; - } else if (dev->hard_mtu < 4096) { - dev->rx_urb_size = 4096; - mfb = AX_RX_CTL_MFB_4096; - } else if (dev->hard_mtu < 8192) { - dev->rx_urb_size = 8192; - mfb = AX_RX_CTL_MFB_8192; - } else if (dev->hard_mtu < 16384) { - dev->rx_urb_size = 16384; - mfb = AX_RX_CTL_MFB_16384; - } - - rxctl = asix_read_rx_ctl(dev); - asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb); - - medium = asix_read_medium_status(dev); - if (dev->net->mtu > 1500) - medium |= AX_MEDIUM_JFE; - else - medium &= ~AX_MEDIUM_JFE; - asix_write_medium_mode(dev, medium); - - if (dev->rx_urb_size > old_rx_urb_size) - usbnet_unlink_rx_urbs(dev); -} - -static int ax88178_change_mtu(struct net_device *net, int new_mtu) -{ - struct usbnet *dev = netdev_priv(net); - int ll_mtu = new_mtu + net->hard_header_len + 4; - - netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu); - - if (new_mtu <= 0 || ll_mtu > 16384) - return -EINVAL; - - if ((ll_mtu % dev->maxpacket) == 0) - return -EDOM; - - net->mtu = new_mtu; - dev->hard_mtu = net->mtu + net->hard_header_len; - ax88178_set_mfb(dev); - - return 0; -} - -static const struct net_device_ops ax88178_netdev_ops = { - .ndo_open = usbnet_open, - .ndo_stop = usbnet_stop, - .ndo_start_xmit = usbnet_start_xmit, - .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_set_mac_address = asix_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_rx_mode = asix_set_multicast, - .ndo_do_ioctl = asix_ioctl, - .ndo_change_mtu = ax88178_change_mtu, -}; - -static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int ret; - u8 buf[ETH_ALEN]; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88772_EEPROM_LEN; - - usbnet_get_endpoints(dev,intf); - - /* Get the MAC address */ - ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); - if (ret < 0) { - dbg("Failed to read MAC address: %d", ret); - return ret; - } - memcpy(dev->net->dev_addr, buf, ETH_ALEN); - - /* Initialize MII structure */ - dev->mii.dev = dev->net; - dev->mii.mdio_read = asix_mdio_read; - dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0x1f; - dev->mii.reg_num_mask = 0xff; - dev->mii.supports_gmii = 1; - dev->mii.phy_id = asix_get_phy_addr(dev); - - dev->net->netdev_ops = &ax88178_netdev_ops; - dev->net->ethtool_ops = &ax88178_ethtool_ops; - - /* Blink LEDS so users know driver saw dongle */ - asix_sw_reset(dev, 0); - msleep(150); - - asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); - msleep(150); - - /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ - if (dev->driver_info->flags & FLAG_FRAMING_AX) { - /* hard_mtu is still the default - the device does not support - jumbo eth frames */ - dev->rx_urb_size = 2048; - } - - return 0; -} - -static const struct driver_info ax8817x_info = { - .description = "ASIX AX8817x USB 2.0 Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x00130103, -}; - -static const struct driver_info dlink_dub_e100_info = { - .description = "DLink DUB-E100 USB Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x009f9d9f, -}; - -static const struct driver_info netgear_fa120_info = { - .description = "Netgear FA-120 USB Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x00130103, -}; - -static const struct driver_info hawking_uf200_info = { - .description = "Hawking UF200 USB Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x001f1d1f, -}; - -static const struct driver_info ax88772_info = { - .description = "ASIX AX88772 USB 2.0 Ethernet", - .bind = ax88772_bind, - .status = asix_status, - .link_reset = ax88772_link_reset, - .reset = ax88772_reset, - .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, - .rx_fixup = asix_rx_fixup, - .tx_fixup = asix_tx_fixup, -}; - -static const struct driver_info ax88178_info = { - .description = "ASIX AX88178 USB 2.0 Ethernet", - .bind = ax88178_bind, - .status = asix_status, - .link_reset = ax88178_link_reset, - .reset = ax88178_reset, - .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR, - .rx_fixup = asix_rx_fixup, - .tx_fixup = asix_tx_fixup, -}; - -static const struct usb_device_id products [] = { -{ - // Linksys USB200M - USB_DEVICE (0x077b, 0x2226), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Netgear FA120 - USB_DEVICE (0x0846, 0x1040), - .driver_info = (unsigned long) &netgear_fa120_info, -}, { - // DLink DUB-E100 - USB_DEVICE (0x2001, 0x1a00), - .driver_info = (unsigned long) &dlink_dub_e100_info, -}, { - // Intellinet, ST Lab USB Ethernet - USB_DEVICE (0x0b95, 0x1720), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Hawking UF200, TrendNet TU2-ET100 - USB_DEVICE (0x07b8, 0x420a), - .driver_info = (unsigned long) &hawking_uf200_info, -}, { - // Billionton Systems, USB2AR - USB_DEVICE (0x08dd, 0x90ff), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // ATEN UC210T - USB_DEVICE (0x0557, 0x2009), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Buffalo LUA-U2-KTX - USB_DEVICE (0x0411, 0x003d), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Buffalo LUA-U2-GT 10/100/1000 - USB_DEVICE (0x0411, 0x006e), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter" - USB_DEVICE (0x6189, 0x182d), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter" - USB_DEVICE (0x0df6, 0x0056), - .driver_info = (unsigned long) &ax88178_info, -}, { - // corega FEther USB2-TX - USB_DEVICE (0x07aa, 0x0017), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Surecom EP-1427X-2 - USB_DEVICE (0x1189, 0x0893), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // goodway corp usb gwusb2e - USB_DEVICE (0x1631, 0x6200), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // JVC MP-PRX1 Port Replicator - USB_DEVICE (0x04f1, 0x3008), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // ASIX AX88772B 10/100 - USB_DEVICE (0x0b95, 0x772b), - .driver_info = (unsigned long) &ax88772_info, -}, { - // ASIX AX88772 10/100 - USB_DEVICE (0x0b95, 0x7720), - .driver_info = (unsigned long) &ax88772_info, -}, { - // ASIX AX88178 10/100/1000 - USB_DEVICE (0x0b95, 0x1780), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Logitec LAN-GTJ/U2A - USB_DEVICE (0x0789, 0x0160), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Linksys USB200M Rev 2 - USB_DEVICE (0x13b1, 0x0018), - .driver_info = (unsigned long) &ax88772_info, -}, { - // 0Q0 cable ethernet - USB_DEVICE (0x1557, 0x7720), - .driver_info = (unsigned long) &ax88772_info, -}, { - // DLink DUB-E100 H/W Ver B1 - USB_DEVICE (0x07d1, 0x3c05), - .driver_info = (unsigned long) &ax88772_info, -}, { - // DLink DUB-E100 H/W Ver B1 Alternate - USB_DEVICE (0x2001, 0x3c05), - .driver_info = (unsigned long) &ax88772_info, -}, { - // Linksys USB1000 - USB_DEVICE (0x1737, 0x0039), - .driver_info = (unsigned long) &ax88178_info, -}, { - // IO-DATA ETG-US2 - USB_DEVICE (0x04bb, 0x0930), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Belkin F5D5055 - USB_DEVICE(0x050d, 0x5055), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Apple USB Ethernet Adapter - USB_DEVICE(0x05ac, 0x1402), - .driver_info = (unsigned long) &ax88772_info, -}, { - // Cables-to-Go USB Ethernet Adapter - USB_DEVICE(0x0b95, 0x772a), - .driver_info = (unsigned long) &ax88772_info, -}, { - // ABOCOM for pci - USB_DEVICE(0x14ea, 0xab11), - .driver_info = (unsigned long) &ax88178_info, -}, { - // ASIX 88772a - USB_DEVICE(0x0db0, 0xa877), - .driver_info = (unsigned long) &ax88772_info, -}, { - // Asus USB Ethernet Adapter - USB_DEVICE (0x0b95, 0x7e2b), - .driver_info = (unsigned long) &ax88772_info, -}, - { }, // END -}; -MODULE_DEVICE_TABLE(usb, products); - -static struct usb_driver asix_driver = { - .name = DRIVER_NAME, - .id_table = products, - .probe = usbnet_probe, - .suspend = usbnet_suspend, - .resume = usbnet_resume, - .disconnect = usbnet_disconnect, - .supports_autosuspend = 1, - .disable_hub_initiated_lpm = 1, -}; +int asix_get_eeprom_len(struct net_device *net); +int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data); -module_usb_driver(asix_driver); +void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info); -MODULE_AUTHOR("David Hollis"); -MODULE_VERSION(DRIVER_VERSION); -MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices"); -MODULE_LICENSE("GPL"); +int asix_set_mac_address(struct net_device *net, void *p); +#endif /* _ASIX_H */ diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 6564c32d3af0..3c1429a25ca4 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -20,171 +20,10 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -// #define DEBUG // error path messages, extra info -// #define VERBOSE // more; success messages - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRIVER_VERSION "22-Dec-2011" -#define DRIVER_NAME "asix" - -/* ASIX AX8817X based USB 2.0 Ethernet Devices */ - -#define AX_CMD_SET_SW_MII 0x06 -#define AX_CMD_READ_MII_REG 0x07 -#define AX_CMD_WRITE_MII_REG 0x08 -#define AX_CMD_SET_HW_MII 0x0a -#define AX_CMD_READ_EEPROM 0x0b -#define AX_CMD_WRITE_EEPROM 0x0c -#define AX_CMD_WRITE_ENABLE 0x0d -#define AX_CMD_WRITE_DISABLE 0x0e -#define AX_CMD_READ_RX_CTL 0x0f -#define AX_CMD_WRITE_RX_CTL 0x10 -#define AX_CMD_READ_IPG012 0x11 -#define AX_CMD_WRITE_IPG0 0x12 -#define AX_CMD_WRITE_IPG1 0x13 -#define AX_CMD_READ_NODE_ID 0x13 -#define AX_CMD_WRITE_NODE_ID 0x14 -#define AX_CMD_WRITE_IPG2 0x14 -#define AX_CMD_WRITE_MULTI_FILTER 0x16 -#define AX88172_CMD_READ_NODE_ID 0x17 -#define AX_CMD_READ_PHY_ID 0x19 -#define AX_CMD_READ_MEDIUM_STATUS 0x1a -#define AX_CMD_WRITE_MEDIUM_MODE 0x1b -#define AX_CMD_READ_MONITOR_MODE 0x1c -#define AX_CMD_WRITE_MONITOR_MODE 0x1d -#define AX_CMD_READ_GPIOS 0x1e -#define AX_CMD_WRITE_GPIOS 0x1f -#define AX_CMD_SW_RESET 0x20 -#define AX_CMD_SW_PHY_STATUS 0x21 -#define AX_CMD_SW_PHY_SELECT 0x22 - -#define AX_MONITOR_MODE 0x01 -#define AX_MONITOR_LINK 0x02 -#define AX_MONITOR_MAGIC 0x04 -#define AX_MONITOR_HSFS 0x10 - -/* AX88172 Medium Status Register values */ -#define AX88172_MEDIUM_FD 0x02 -#define AX88172_MEDIUM_TX 0x04 -#define AX88172_MEDIUM_FC 0x10 -#define AX88172_MEDIUM_DEFAULT \ - ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC ) - -#define AX_MCAST_FILTER_SIZE 8 -#define AX_MAX_MCAST 64 - -#define AX_SWRESET_CLEAR 0x00 -#define AX_SWRESET_RR 0x01 -#define AX_SWRESET_RT 0x02 -#define AX_SWRESET_PRTE 0x04 -#define AX_SWRESET_PRL 0x08 -#define AX_SWRESET_BZ 0x10 -#define AX_SWRESET_IPRL 0x20 -#define AX_SWRESET_IPPD 0x40 - -#define AX88772_IPG0_DEFAULT 0x15 -#define AX88772_IPG1_DEFAULT 0x0c -#define AX88772_IPG2_DEFAULT 0x12 - -/* AX88772 & AX88178 Medium Mode Register */ -#define AX_MEDIUM_PF 0x0080 -#define AX_MEDIUM_JFE 0x0040 -#define AX_MEDIUM_TFC 0x0020 -#define AX_MEDIUM_RFC 0x0010 -#define AX_MEDIUM_ENCK 0x0008 -#define AX_MEDIUM_AC 0x0004 -#define AX_MEDIUM_FD 0x0002 -#define AX_MEDIUM_GM 0x0001 -#define AX_MEDIUM_SM 0x1000 -#define AX_MEDIUM_SBP 0x0800 -#define AX_MEDIUM_PS 0x0200 -#define AX_MEDIUM_RE 0x0100 - -#define AX88178_MEDIUM_DEFAULT \ - (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ - AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ - AX_MEDIUM_RE) - -#define AX88772_MEDIUM_DEFAULT \ - (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ - AX_MEDIUM_TFC | AX_MEDIUM_PS | \ - AX_MEDIUM_AC | AX_MEDIUM_RE) - -/* AX88772 & AX88178 RX_CTL values */ -#define AX_RX_CTL_SO 0x0080 -#define AX_RX_CTL_AP 0x0020 -#define AX_RX_CTL_AM 0x0010 -#define AX_RX_CTL_AB 0x0008 -#define AX_RX_CTL_SEP 0x0004 -#define AX_RX_CTL_AMALL 0x0002 -#define AX_RX_CTL_PRO 0x0001 -#define AX_RX_CTL_MFB_2048 0x0000 -#define AX_RX_CTL_MFB_4096 0x0100 -#define AX_RX_CTL_MFB_8192 0x0200 -#define AX_RX_CTL_MFB_16384 0x0300 - -#define AX_DEFAULT_RX_CTL (AX_RX_CTL_SO | AX_RX_CTL_AB) - -/* GPIO 0 .. 2 toggles */ -#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ -#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ -#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */ -#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */ -#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ -#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ -#define AX_GPIO_RESERVED 0x40 /* Reserved */ -#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ - -#define AX_EEPROM_MAGIC 0xdeadbeef -#define AX88172_EEPROM_LEN 0x40 -#define AX88772_EEPROM_LEN 0xff - -#define PHY_MODE_MARVELL 0x0000 -#define MII_MARVELL_LED_CTRL 0x0018 -#define MII_MARVELL_STATUS 0x001b -#define MII_MARVELL_CTRL 0x0014 - -#define MARVELL_LED_MANUAL 0x0019 - -#define MARVELL_STATUS_HWCFG 0x0004 - -#define MARVELL_CTRL_TXDELAY 0x0002 -#define MARVELL_CTRL_RXDELAY 0x0080 - -#define PHY_MODE_RTL8211CL 0x000C - -/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ -struct asix_data { - u8 multi_filter[AX_MCAST_FILTER_SIZE]; - u8 mac_addr[ETH_ALEN]; - u8 phymode; - u8 ledmode; - u8 eeprom_len; -}; - -struct ax88172_int_data { - __le16 res1; - u8 link; - __le16 res2; - u8 status; - __le16 res3; -} __packed; - -static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) +#include "asix.h" + +int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) { void *buf; int err = -ENOMEM; @@ -216,8 +55,8 @@ out: return err; } -static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) +int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) { void *buf = NULL; int err = -ENOMEM; @@ -260,9 +99,8 @@ static void asix_async_cmd_callback(struct urb *urb) usb_free_urb(urb); } -static void -asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) +void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) { struct usb_ctrlrequest *req; int status; @@ -304,7 +142,7 @@ asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, } } -static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) { int offset = 0; @@ -347,8 +185,8 @@ static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) return 1; } -static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, - gfp_t flags) +struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) { int padlen; int headroom = skb_headroom(skb); @@ -402,27 +240,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, return skb; } -static void asix_status(struct usbnet *dev, struct urb *urb) -{ - struct ax88172_int_data *event; - int link; - - if (urb->actual_length < 8) - return; - - event = urb->transfer_buffer; - link = event->link & 0x01; - if (netif_carrier_ok(dev->net) != link) { - if (link) { - netif_carrier_on(dev->net); - usbnet_defer_kevent (dev, EVENT_LINK_RESET ); - } else - netif_carrier_off(dev->net); - netdev_dbg(dev->net, "Link Status is: %d\n", link); - } -} - -static inline int asix_set_sw_mii(struct usbnet *dev) +int asix_set_sw_mii(struct usbnet *dev) { int ret; ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); @@ -431,7 +249,7 @@ static inline int asix_set_sw_mii(struct usbnet *dev) return ret; } -static inline int asix_set_hw_mii(struct usbnet *dev) +int asix_set_hw_mii(struct usbnet *dev) { int ret; ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); @@ -440,7 +258,7 @@ static inline int asix_set_hw_mii(struct usbnet *dev) return ret; } -static inline int asix_get_phy_addr(struct usbnet *dev) +int asix_get_phy_addr(struct usbnet *dev) { u8 buf[2]; int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); @@ -459,7 +277,7 @@ out: return ret; } -static int asix_sw_reset(struct usbnet *dev, u8 flags) +int asix_sw_reset(struct usbnet *dev, u8 flags) { int ret; @@ -470,7 +288,7 @@ static int asix_sw_reset(struct usbnet *dev, u8 flags) return ret; } -static u16 asix_read_rx_ctl(struct usbnet *dev) +u16 asix_read_rx_ctl(struct usbnet *dev) { __le16 v; int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v); @@ -484,7 +302,7 @@ out: return ret; } -static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) +int asix_write_rx_ctl(struct usbnet *dev, u16 mode) { int ret; @@ -497,7 +315,7 @@ static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) return ret; } -static u16 asix_read_medium_status(struct usbnet *dev) +u16 asix_read_medium_status(struct usbnet *dev) { __le16 v; int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); @@ -512,7 +330,7 @@ static u16 asix_read_medium_status(struct usbnet *dev) } -static int asix_write_medium_mode(struct usbnet *dev, u16 mode) +int asix_write_medium_mode(struct usbnet *dev, u16 mode) { int ret; @@ -525,7 +343,7 @@ static int asix_write_medium_mode(struct usbnet *dev, u16 mode) return ret; } -static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) +int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) { int ret; @@ -544,7 +362,7 @@ static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) /* * AX88772 & AX88178 have a 16-bit RX_CTL value */ -static void asix_set_multicast(struct net_device *net) +void asix_set_multicast(struct net_device *net) { struct usbnet *dev = netdev_priv(net); struct asix_data *data = (struct asix_data *)&dev->data; @@ -583,7 +401,7 @@ static void asix_set_multicast(struct net_device *net) asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); } -static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) +int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) { struct usbnet *dev = netdev_priv(netdev); __le16 res; @@ -601,8 +419,7 @@ static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) return le16_to_cpu(res); } -static void -asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) +void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) { struct usbnet *dev = netdev_priv(netdev); __le16 res = cpu_to_le16(val); @@ -616,37 +433,7 @@ asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) mutex_unlock(&dev->phy_mutex); } -/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ -static u32 asix_get_phyid(struct usbnet *dev) -{ - int phy_reg; - u32 phy_id; - int i; - - /* Poll for the rare case the FW or phy isn't ready yet. */ - for (i = 0; i < 100; i++) { - phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); - if (phy_reg != 0 && phy_reg != 0xFFFF) - break; - mdelay(1); - } - - if (phy_reg <= 0 || phy_reg == 0xFFFF) - return 0; - - phy_id = (phy_reg & 0xffff) << 16; - - phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); - if (phy_reg < 0) - return 0; - - phy_id |= (phy_reg & 0xffff); - - return phy_id; -} - -static void -asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { struct usbnet *dev = netdev_priv(net); u8 opt; @@ -664,8 +451,7 @@ asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) wolinfo->wolopts |= WAKE_MAGIC; } -static int -asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { struct usbnet *dev = netdev_priv(net); u8 opt = 0; @@ -682,7 +468,7 @@ asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) return 0; } -static int asix_get_eeprom_len(struct net_device *net) +int asix_get_eeprom_len(struct net_device *net) { struct usbnet *dev = netdev_priv(net); struct asix_data *data = (struct asix_data *)&dev->data; @@ -690,8 +476,8 @@ static int asix_get_eeprom_len(struct net_device *net) return data->eeprom_len; } -static int asix_get_eeprom(struct net_device *net, - struct ethtool_eeprom *eeprom, u8 *data) +int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data) { struct usbnet *dev = netdev_priv(net); __le16 *ebuf = (__le16 *)data; @@ -714,8 +500,7 @@ static int asix_get_eeprom(struct net_device *net, return 0; } -static void asix_get_drvinfo (struct net_device *net, - struct ethtool_drvinfo *info) +void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); struct asix_data *data = (struct asix_data *)&dev->data; @@ -727,21 +512,7 @@ static void asix_get_drvinfo (struct net_device *net, info->eedump_len = data->eeprom_len; } -static u32 asix_get_link(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - - return mii_link_ok(&dev->mii); -} - -static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) -{ - struct usbnet *dev = netdev_priv(net); - - return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); -} - -static int asix_set_mac_address(struct net_device *net, void *p) +int asix_set_mac_address(struct net_device *net, void *p) { struct usbnet *dev = netdev_priv(net); struct asix_data *data = (struct asix_data *)&dev->data; @@ -764,917 +535,3 @@ static int asix_set_mac_address(struct net_device *net, void *p) return 0; } - -/* We need to override some ethtool_ops so we require our - own structure so we don't interfere with other usbnet - devices that may be connected at the same time. */ -static const struct ethtool_ops ax88172_ethtool_ops = { - .get_drvinfo = asix_get_drvinfo, - .get_link = asix_get_link, - .get_msglevel = usbnet_get_msglevel, - .set_msglevel = usbnet_set_msglevel, - .get_wol = asix_get_wol, - .set_wol = asix_set_wol, - .get_eeprom_len = asix_get_eeprom_len, - .get_eeprom = asix_get_eeprom, - .get_settings = usbnet_get_settings, - .set_settings = usbnet_set_settings, - .nway_reset = usbnet_nway_reset, -}; - -static void ax88172_set_multicast(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - u8 rx_ctl = 0x8c; - - if (net->flags & IFF_PROMISC) { - rx_ctl |= 0x01; - } else if (net->flags & IFF_ALLMULTI || - netdev_mc_count(net) > AX_MAX_MCAST) { - rx_ctl |= 0x02; - } else if (netdev_mc_empty(net)) { - /* just broadcast and directed */ - } else { - /* We use the 20 byte dev->data - * for our 8 byte filter buffer - * to avoid allocating memory that - * is tricky to free later */ - struct netdev_hw_addr *ha; - u32 crc_bits; - - memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); - - /* Build the multicast hash filter. */ - netdev_for_each_mc_addr(ha, net) { - crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; - data->multi_filter[crc_bits >> 3] |= - 1 << (crc_bits & 7); - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, - AX_MCAST_FILTER_SIZE, data->multi_filter); - - rx_ctl |= 0x10; - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); -} - -static int ax88172_link_reset(struct usbnet *dev) -{ - u8 mode; - struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; - - mii_check_media(&dev->mii, 1, 1); - mii_ethtool_gset(&dev->mii, &ecmd); - mode = AX88172_MEDIUM_DEFAULT; - - if (ecmd.duplex != DUPLEX_FULL) - mode |= ~AX88172_MEDIUM_FD; - - netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", - ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); - - asix_write_medium_mode(dev, mode); - - return 0; -} - -static const struct net_device_ops ax88172_netdev_ops = { - .ndo_open = usbnet_open, - .ndo_stop = usbnet_stop, - .ndo_start_xmit = usbnet_start_xmit, - .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_change_mtu = usbnet_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, - .ndo_do_ioctl = asix_ioctl, - .ndo_set_rx_mode = ax88172_set_multicast, -}; - -static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int ret = 0; - u8 buf[ETH_ALEN]; - int i; - unsigned long gpio_bits = dev->driver_info->data; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88172_EEPROM_LEN; - - usbnet_get_endpoints(dev,intf); - - /* Toggle the GPIOs in a manufacturer/model specific way */ - for (i = 2; i >= 0; i--) { - ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, - (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL); - if (ret < 0) - goto out; - msleep(5); - } - - ret = asix_write_rx_ctl(dev, 0x80); - if (ret < 0) - goto out; - - /* Get the MAC address */ - ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); - if (ret < 0) { - dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); - goto out; - } - memcpy(dev->net->dev_addr, buf, ETH_ALEN); - - /* Initialize MII structure */ - dev->mii.dev = dev->net; - dev->mii.mdio_read = asix_mdio_read; - dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0x3f; - dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = asix_get_phy_addr(dev); - - dev->net->netdev_ops = &ax88172_netdev_ops; - dev->net->ethtool_ops = &ax88172_ethtool_ops; - dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ - dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); - mii_nway_restart(&dev->mii); - - return 0; - -out: - return ret; -} - -static const struct ethtool_ops ax88772_ethtool_ops = { - .get_drvinfo = asix_get_drvinfo, - .get_link = asix_get_link, - .get_msglevel = usbnet_get_msglevel, - .set_msglevel = usbnet_set_msglevel, - .get_wol = asix_get_wol, - .set_wol = asix_set_wol, - .get_eeprom_len = asix_get_eeprom_len, - .get_eeprom = asix_get_eeprom, - .get_settings = usbnet_get_settings, - .set_settings = usbnet_set_settings, - .nway_reset = usbnet_nway_reset, -}; - -static int ax88772_link_reset(struct usbnet *dev) -{ - u16 mode; - struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; - - mii_check_media(&dev->mii, 1, 1); - mii_ethtool_gset(&dev->mii, &ecmd); - mode = AX88772_MEDIUM_DEFAULT; - - if (ethtool_cmd_speed(&ecmd) != SPEED_100) - mode &= ~AX_MEDIUM_PS; - - if (ecmd.duplex != DUPLEX_FULL) - mode &= ~AX_MEDIUM_FD; - - netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", - ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); - - asix_write_medium_mode(dev, mode); - - return 0; -} - -static int ax88772_reset(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - int ret, embd_phy; - u16 rx_ctl; - - ret = asix_write_gpio(dev, - AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5); - if (ret < 0) - goto out; - - embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); - - ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); - if (ret < 0) { - dbg("Select PHY #1 failed: %d", ret); - goto out; - } - - ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); - if (ret < 0) - goto out; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); - if (ret < 0) - goto out; - - msleep(150); - - if (embd_phy) { - ret = asix_sw_reset(dev, AX_SWRESET_IPRL); - if (ret < 0) - goto out; - } else { - ret = asix_sw_reset(dev, AX_SWRESET_PRTE); - if (ret < 0) - goto out; - } - - msleep(150); - rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x after software reset", rx_ctl); - ret = asix_write_rx_ctl(dev, 0x0000); - if (ret < 0) - goto out; - - rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl); - - ret = asix_sw_reset(dev, AX_SWRESET_PRL); - if (ret < 0) - goto out; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL); - if (ret < 0) - goto out; - - msleep(150); - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA); - mii_nway_restart(&dev->mii); - - ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT); - if (ret < 0) - goto out; - - ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, - AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, - AX88772_IPG2_DEFAULT, 0, NULL); - if (ret < 0) { - dbg("Write IPG,IPG1,IPG2 failed: %d", ret); - goto out; - } - - /* Rewrite MAC address */ - memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); - ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); - if (ret < 0) - goto out; - - /* Set RX_CTL to default values with 2k buffer, and enable cactus */ - ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); - if (ret < 0) - goto out; - - rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x after all initializations", rx_ctl); - - rx_ctl = asix_read_medium_status(dev); - dbg("Medium Status is 0x%04x after all initializations", rx_ctl); - - return 0; - -out: - return ret; - -} - -static const struct net_device_ops ax88772_netdev_ops = { - .ndo_open = usbnet_open, - .ndo_stop = usbnet_stop, - .ndo_start_xmit = usbnet_start_xmit, - .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_change_mtu = usbnet_change_mtu, - .ndo_set_mac_address = asix_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_do_ioctl = asix_ioctl, - .ndo_set_rx_mode = asix_set_multicast, -}; - -static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int ret, embd_phy; - struct asix_data *data = (struct asix_data *)&dev->data; - u8 buf[ETH_ALEN]; - u32 phyid; - - data->eeprom_len = AX88772_EEPROM_LEN; - - usbnet_get_endpoints(dev,intf); - - /* Get the MAC address */ - ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); - if (ret < 0) { - dbg("Failed to read MAC address: %d", ret); - return ret; - } - memcpy(dev->net->dev_addr, buf, ETH_ALEN); - - /* Initialize MII structure */ - dev->mii.dev = dev->net; - dev->mii.mdio_read = asix_mdio_read; - dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0x1f; - dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = asix_get_phy_addr(dev); - - dev->net->netdev_ops = &ax88772_netdev_ops; - dev->net->ethtool_ops = &ax88772_ethtool_ops; - dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ - dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ - - embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); - - /* Reset the PHY to normal operation mode */ - ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); - if (ret < 0) { - dbg("Select PHY #1 failed: %d", ret); - return ret; - } - - ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); - - /* Read PHYID register *AFTER* the PHY was reset properly */ - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); - - /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ - if (dev->driver_info->flags & FLAG_FRAMING_AX) { - /* hard_mtu is still the default - the device does not support - jumbo eth frames */ - dev->rx_urb_size = 2048; - } - - return 0; -} - -static const struct ethtool_ops ax88178_ethtool_ops = { - .get_drvinfo = asix_get_drvinfo, - .get_link = asix_get_link, - .get_msglevel = usbnet_get_msglevel, - .set_msglevel = usbnet_set_msglevel, - .get_wol = asix_get_wol, - .set_wol = asix_set_wol, - .get_eeprom_len = asix_get_eeprom_len, - .get_eeprom = asix_get_eeprom, - .get_settings = usbnet_get_settings, - .set_settings = usbnet_set_settings, - .nway_reset = usbnet_nway_reset, -}; - -static int marvell_phy_init(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - u16 reg; - - netdev_dbg(dev->net, "marvell_phy_init()\n"); - - reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS); - netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg); - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL, - MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY); - - if (data->ledmode) { - reg = asix_mdio_read(dev->net, dev->mii.phy_id, - MII_MARVELL_LED_CTRL); - netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg); - - reg &= 0xf8ff; - reg |= (1 + 0x0100); - asix_mdio_write(dev->net, dev->mii.phy_id, - MII_MARVELL_LED_CTRL, reg); - - reg = asix_mdio_read(dev->net, dev->mii.phy_id, - MII_MARVELL_LED_CTRL); - netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg); - reg &= 0xfc0f; - } - - return 0; -} - -static int rtl8211cl_phy_init(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - - netdev_dbg(dev->net, "rtl8211cl_phy_init()\n"); - - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x01, - asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); - - if (data->ledmode == 12) { - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb); - asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); - } - - return 0; -} - -static int marvell_led_status(struct usbnet *dev, u16 speed) -{ - u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL); - - netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg); - - /* Clear out the center LED bits - 0x03F0 */ - reg &= 0xfc0f; - - switch (speed) { - case SPEED_1000: - reg |= 0x03e0; - break; - case SPEED_100: - reg |= 0x03b0; - break; - default: - reg |= 0x02f0; - } - - netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg); - asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg); - - return 0; -} - -static int ax88178_reset(struct usbnet *dev) -{ - struct asix_data *data = (struct asix_data *)&dev->data; - int ret; - __le16 eeprom; - u8 status; - int gpio0 = 0; - u32 phyid; - - asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); - dbg("GPIO Status: 0x%04x", status); - - asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); - asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); - asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); - - dbg("EEPROM index 0x17 is 0x%04x", eeprom); - - if (eeprom == cpu_to_le16(0xffff)) { - data->phymode = PHY_MODE_MARVELL; - data->ledmode = 0; - gpio0 = 1; - } else { - data->phymode = le16_to_cpu(eeprom) & 0x7F; - data->ledmode = le16_to_cpu(eeprom) >> 8; - gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; - } - dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); - - /* Power up external GigaPHY through AX88178 GPIO pin */ - asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); - if ((le16_to_cpu(eeprom) >> 8) != 1) { - asix_write_gpio(dev, 0x003c, 30); - asix_write_gpio(dev, 0x001c, 300); - asix_write_gpio(dev, 0x003c, 30); - } else { - dbg("gpio phymode == 1 path"); - asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); - asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); - } - - /* Read PHYID register *AFTER* powering up PHY */ - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); - - /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ - asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); - - asix_sw_reset(dev, 0); - msleep(150); - - asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); - msleep(150); - - asix_write_rx_ctl(dev, 0); - - if (data->phymode == PHY_MODE_MARVELL) { - marvell_phy_init(dev); - msleep(60); - } else if (data->phymode == PHY_MODE_RTL8211CL) - rtl8211cl_phy_init(dev); - - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, - ADVERTISE_1000FULL); - - mii_nway_restart(&dev->mii); - - ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT); - if (ret < 0) - return ret; - - /* Rewrite MAC address */ - memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); - ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); - if (ret < 0) - return ret; - - ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); - if (ret < 0) - return ret; - - return 0; -} - -static int ax88178_link_reset(struct usbnet *dev) -{ - u16 mode; - struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; - struct asix_data *data = (struct asix_data *)&dev->data; - u32 speed; - - netdev_dbg(dev->net, "ax88178_link_reset()\n"); - - mii_check_media(&dev->mii, 1, 1); - mii_ethtool_gset(&dev->mii, &ecmd); - mode = AX88178_MEDIUM_DEFAULT; - speed = ethtool_cmd_speed(&ecmd); - - if (speed == SPEED_1000) - mode |= AX_MEDIUM_GM; - else if (speed == SPEED_100) - mode |= AX_MEDIUM_PS; - else - mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); - - mode |= AX_MEDIUM_ENCK; - - if (ecmd.duplex == DUPLEX_FULL) - mode |= AX_MEDIUM_FD; - else - mode &= ~AX_MEDIUM_FD; - - netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", - speed, ecmd.duplex, mode); - - asix_write_medium_mode(dev, mode); - - if (data->phymode == PHY_MODE_MARVELL && data->ledmode) - marvell_led_status(dev, speed); - - return 0; -} - -static void ax88178_set_mfb(struct usbnet *dev) -{ - u16 mfb = AX_RX_CTL_MFB_16384; - u16 rxctl; - u16 medium; - int old_rx_urb_size = dev->rx_urb_size; - - if (dev->hard_mtu < 2048) { - dev->rx_urb_size = 2048; - mfb = AX_RX_CTL_MFB_2048; - } else if (dev->hard_mtu < 4096) { - dev->rx_urb_size = 4096; - mfb = AX_RX_CTL_MFB_4096; - } else if (dev->hard_mtu < 8192) { - dev->rx_urb_size = 8192; - mfb = AX_RX_CTL_MFB_8192; - } else if (dev->hard_mtu < 16384) { - dev->rx_urb_size = 16384; - mfb = AX_RX_CTL_MFB_16384; - } - - rxctl = asix_read_rx_ctl(dev); - asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb); - - medium = asix_read_medium_status(dev); - if (dev->net->mtu > 1500) - medium |= AX_MEDIUM_JFE; - else - medium &= ~AX_MEDIUM_JFE; - asix_write_medium_mode(dev, medium); - - if (dev->rx_urb_size > old_rx_urb_size) - usbnet_unlink_rx_urbs(dev); -} - -static int ax88178_change_mtu(struct net_device *net, int new_mtu) -{ - struct usbnet *dev = netdev_priv(net); - int ll_mtu = new_mtu + net->hard_header_len + 4; - - netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu); - - if (new_mtu <= 0 || ll_mtu > 16384) - return -EINVAL; - - if ((ll_mtu % dev->maxpacket) == 0) - return -EDOM; - - net->mtu = new_mtu; - dev->hard_mtu = net->mtu + net->hard_header_len; - ax88178_set_mfb(dev); - - return 0; -} - -static const struct net_device_ops ax88178_netdev_ops = { - .ndo_open = usbnet_open, - .ndo_stop = usbnet_stop, - .ndo_start_xmit = usbnet_start_xmit, - .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_set_mac_address = asix_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_rx_mode = asix_set_multicast, - .ndo_do_ioctl = asix_ioctl, - .ndo_change_mtu = ax88178_change_mtu, -}; - -static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int ret; - u8 buf[ETH_ALEN]; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88772_EEPROM_LEN; - - usbnet_get_endpoints(dev,intf); - - /* Get the MAC address */ - ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); - if (ret < 0) { - dbg("Failed to read MAC address: %d", ret); - return ret; - } - memcpy(dev->net->dev_addr, buf, ETH_ALEN); - - /* Initialize MII structure */ - dev->mii.dev = dev->net; - dev->mii.mdio_read = asix_mdio_read; - dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0x1f; - dev->mii.reg_num_mask = 0xff; - dev->mii.supports_gmii = 1; - dev->mii.phy_id = asix_get_phy_addr(dev); - - dev->net->netdev_ops = &ax88178_netdev_ops; - dev->net->ethtool_ops = &ax88178_ethtool_ops; - - /* Blink LEDS so users know driver saw dongle */ - asix_sw_reset(dev, 0); - msleep(150); - - asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); - msleep(150); - - /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ - if (dev->driver_info->flags & FLAG_FRAMING_AX) { - /* hard_mtu is still the default - the device does not support - jumbo eth frames */ - dev->rx_urb_size = 2048; - } - - return 0; -} - -static const struct driver_info ax8817x_info = { - .description = "ASIX AX8817x USB 2.0 Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x00130103, -}; - -static const struct driver_info dlink_dub_e100_info = { - .description = "DLink DUB-E100 USB Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x009f9d9f, -}; - -static const struct driver_info netgear_fa120_info = { - .description = "Netgear FA-120 USB Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x00130103, -}; - -static const struct driver_info hawking_uf200_info = { - .description = "Hawking UF200 USB Ethernet", - .bind = ax88172_bind, - .status = asix_status, - .link_reset = ax88172_link_reset, - .reset = ax88172_link_reset, - .flags = FLAG_ETHER | FLAG_LINK_INTR, - .data = 0x001f1d1f, -}; - -static const struct driver_info ax88772_info = { - .description = "ASIX AX88772 USB 2.0 Ethernet", - .bind = ax88772_bind, - .status = asix_status, - .link_reset = ax88772_link_reset, - .reset = ax88772_reset, - .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, - .rx_fixup = asix_rx_fixup, - .tx_fixup = asix_tx_fixup, -}; - -static const struct driver_info ax88178_info = { - .description = "ASIX AX88178 USB 2.0 Ethernet", - .bind = ax88178_bind, - .status = asix_status, - .link_reset = ax88178_link_reset, - .reset = ax88178_reset, - .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR, - .rx_fixup = asix_rx_fixup, - .tx_fixup = asix_tx_fixup, -}; - -static const struct usb_device_id products [] = { -{ - // Linksys USB200M - USB_DEVICE (0x077b, 0x2226), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Netgear FA120 - USB_DEVICE (0x0846, 0x1040), - .driver_info = (unsigned long) &netgear_fa120_info, -}, { - // DLink DUB-E100 - USB_DEVICE (0x2001, 0x1a00), - .driver_info = (unsigned long) &dlink_dub_e100_info, -}, { - // Intellinet, ST Lab USB Ethernet - USB_DEVICE (0x0b95, 0x1720), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Hawking UF200, TrendNet TU2-ET100 - USB_DEVICE (0x07b8, 0x420a), - .driver_info = (unsigned long) &hawking_uf200_info, -}, { - // Billionton Systems, USB2AR - USB_DEVICE (0x08dd, 0x90ff), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // ATEN UC210T - USB_DEVICE (0x0557, 0x2009), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Buffalo LUA-U2-KTX - USB_DEVICE (0x0411, 0x003d), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Buffalo LUA-U2-GT 10/100/1000 - USB_DEVICE (0x0411, 0x006e), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter" - USB_DEVICE (0x6189, 0x182d), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter" - USB_DEVICE (0x0df6, 0x0056), - .driver_info = (unsigned long) &ax88178_info, -}, { - // corega FEther USB2-TX - USB_DEVICE (0x07aa, 0x0017), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // Surecom EP-1427X-2 - USB_DEVICE (0x1189, 0x0893), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // goodway corp usb gwusb2e - USB_DEVICE (0x1631, 0x6200), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // JVC MP-PRX1 Port Replicator - USB_DEVICE (0x04f1, 0x3008), - .driver_info = (unsigned long) &ax8817x_info, -}, { - // ASIX AX88772B 10/100 - USB_DEVICE (0x0b95, 0x772b), - .driver_info = (unsigned long) &ax88772_info, -}, { - // ASIX AX88772 10/100 - USB_DEVICE (0x0b95, 0x7720), - .driver_info = (unsigned long) &ax88772_info, -}, { - // ASIX AX88178 10/100/1000 - USB_DEVICE (0x0b95, 0x1780), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Logitec LAN-GTJ/U2A - USB_DEVICE (0x0789, 0x0160), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Linksys USB200M Rev 2 - USB_DEVICE (0x13b1, 0x0018), - .driver_info = (unsigned long) &ax88772_info, -}, { - // 0Q0 cable ethernet - USB_DEVICE (0x1557, 0x7720), - .driver_info = (unsigned long) &ax88772_info, -}, { - // DLink DUB-E100 H/W Ver B1 - USB_DEVICE (0x07d1, 0x3c05), - .driver_info = (unsigned long) &ax88772_info, -}, { - // DLink DUB-E100 H/W Ver B1 Alternate - USB_DEVICE (0x2001, 0x3c05), - .driver_info = (unsigned long) &ax88772_info, -}, { - // Linksys USB1000 - USB_DEVICE (0x1737, 0x0039), - .driver_info = (unsigned long) &ax88178_info, -}, { - // IO-DATA ETG-US2 - USB_DEVICE (0x04bb, 0x0930), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Belkin F5D5055 - USB_DEVICE(0x050d, 0x5055), - .driver_info = (unsigned long) &ax88178_info, -}, { - // Apple USB Ethernet Adapter - USB_DEVICE(0x05ac, 0x1402), - .driver_info = (unsigned long) &ax88772_info, -}, { - // Cables-to-Go USB Ethernet Adapter - USB_DEVICE(0x0b95, 0x772a), - .driver_info = (unsigned long) &ax88772_info, -}, { - // ABOCOM for pci - USB_DEVICE(0x14ea, 0xab11), - .driver_info = (unsigned long) &ax88178_info, -}, { - // ASIX 88772a - USB_DEVICE(0x0db0, 0xa877), - .driver_info = (unsigned long) &ax88772_info, -}, { - // Asus USB Ethernet Adapter - USB_DEVICE (0x0b95, 0x7e2b), - .driver_info = (unsigned long) &ax88772_info, -}, - { }, // END -}; -MODULE_DEVICE_TABLE(usb, products); - -static struct usb_driver asix_driver = { - .name = DRIVER_NAME, - .id_table = products, - .probe = usbnet_probe, - .suspend = usbnet_suspend, - .resume = usbnet_resume, - .disconnect = usbnet_disconnect, - .supports_autosuspend = 1, - .disable_hub_initiated_lpm = 1, -}; - -module_usb_driver(asix_driver); - -MODULE_AUTHOR("David Hollis"); -MODULE_VERSION(DRIVER_VERSION); -MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 6564c32d3af0..8c513f7921f4 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -20,137 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -// #define DEBUG // error path messages, extra info -// #define VERBOSE // more; success messages - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRIVER_VERSION "22-Dec-2011" -#define DRIVER_NAME "asix" - -/* ASIX AX8817X based USB 2.0 Ethernet Devices */ - -#define AX_CMD_SET_SW_MII 0x06 -#define AX_CMD_READ_MII_REG 0x07 -#define AX_CMD_WRITE_MII_REG 0x08 -#define AX_CMD_SET_HW_MII 0x0a -#define AX_CMD_READ_EEPROM 0x0b -#define AX_CMD_WRITE_EEPROM 0x0c -#define AX_CMD_WRITE_ENABLE 0x0d -#define AX_CMD_WRITE_DISABLE 0x0e -#define AX_CMD_READ_RX_CTL 0x0f -#define AX_CMD_WRITE_RX_CTL 0x10 -#define AX_CMD_READ_IPG012 0x11 -#define AX_CMD_WRITE_IPG0 0x12 -#define AX_CMD_WRITE_IPG1 0x13 -#define AX_CMD_READ_NODE_ID 0x13 -#define AX_CMD_WRITE_NODE_ID 0x14 -#define AX_CMD_WRITE_IPG2 0x14 -#define AX_CMD_WRITE_MULTI_FILTER 0x16 -#define AX88172_CMD_READ_NODE_ID 0x17 -#define AX_CMD_READ_PHY_ID 0x19 -#define AX_CMD_READ_MEDIUM_STATUS 0x1a -#define AX_CMD_WRITE_MEDIUM_MODE 0x1b -#define AX_CMD_READ_MONITOR_MODE 0x1c -#define AX_CMD_WRITE_MONITOR_MODE 0x1d -#define AX_CMD_READ_GPIOS 0x1e -#define AX_CMD_WRITE_GPIOS 0x1f -#define AX_CMD_SW_RESET 0x20 -#define AX_CMD_SW_PHY_STATUS 0x21 -#define AX_CMD_SW_PHY_SELECT 0x22 - -#define AX_MONITOR_MODE 0x01 -#define AX_MONITOR_LINK 0x02 -#define AX_MONITOR_MAGIC 0x04 -#define AX_MONITOR_HSFS 0x10 - -/* AX88172 Medium Status Register values */ -#define AX88172_MEDIUM_FD 0x02 -#define AX88172_MEDIUM_TX 0x04 -#define AX88172_MEDIUM_FC 0x10 -#define AX88172_MEDIUM_DEFAULT \ - ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC ) - -#define AX_MCAST_FILTER_SIZE 8 -#define AX_MAX_MCAST 64 - -#define AX_SWRESET_CLEAR 0x00 -#define AX_SWRESET_RR 0x01 -#define AX_SWRESET_RT 0x02 -#define AX_SWRESET_PRTE 0x04 -#define AX_SWRESET_PRL 0x08 -#define AX_SWRESET_BZ 0x10 -#define AX_SWRESET_IPRL 0x20 -#define AX_SWRESET_IPPD 0x40 - -#define AX88772_IPG0_DEFAULT 0x15 -#define AX88772_IPG1_DEFAULT 0x0c -#define AX88772_IPG2_DEFAULT 0x12 - -/* AX88772 & AX88178 Medium Mode Register */ -#define AX_MEDIUM_PF 0x0080 -#define AX_MEDIUM_JFE 0x0040 -#define AX_MEDIUM_TFC 0x0020 -#define AX_MEDIUM_RFC 0x0010 -#define AX_MEDIUM_ENCK 0x0008 -#define AX_MEDIUM_AC 0x0004 -#define AX_MEDIUM_FD 0x0002 -#define AX_MEDIUM_GM 0x0001 -#define AX_MEDIUM_SM 0x1000 -#define AX_MEDIUM_SBP 0x0800 -#define AX_MEDIUM_PS 0x0200 -#define AX_MEDIUM_RE 0x0100 - -#define AX88178_MEDIUM_DEFAULT \ - (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ - AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ - AX_MEDIUM_RE) - -#define AX88772_MEDIUM_DEFAULT \ - (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ - AX_MEDIUM_TFC | AX_MEDIUM_PS | \ - AX_MEDIUM_AC | AX_MEDIUM_RE) - -/* AX88772 & AX88178 RX_CTL values */ -#define AX_RX_CTL_SO 0x0080 -#define AX_RX_CTL_AP 0x0020 -#define AX_RX_CTL_AM 0x0010 -#define AX_RX_CTL_AB 0x0008 -#define AX_RX_CTL_SEP 0x0004 -#define AX_RX_CTL_AMALL 0x0002 -#define AX_RX_CTL_PRO 0x0001 -#define AX_RX_CTL_MFB_2048 0x0000 -#define AX_RX_CTL_MFB_4096 0x0100 -#define AX_RX_CTL_MFB_8192 0x0200 -#define AX_RX_CTL_MFB_16384 0x0300 - -#define AX_DEFAULT_RX_CTL (AX_RX_CTL_SO | AX_RX_CTL_AB) - -/* GPIO 0 .. 2 toggles */ -#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ -#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ -#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */ -#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */ -#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ -#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ -#define AX_GPIO_RESERVED 0x40 /* Reserved */ -#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ - -#define AX_EEPROM_MAGIC 0xdeadbeef -#define AX88172_EEPROM_LEN 0x40 -#define AX88772_EEPROM_LEN 0xff +#include "asix.h" #define PHY_MODE_MARVELL 0x0000 #define MII_MARVELL_LED_CTRL 0x0018 @@ -166,15 +36,6 @@ #define PHY_MODE_RTL8211CL 0x000C -/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ -struct asix_data { - u8 multi_filter[AX_MCAST_FILTER_SIZE]; - u8 mac_addr[ETH_ALEN]; - u8 phymode; - u8 ledmode; - u8 eeprom_len; -}; - struct ax88172_int_data { __le16 res1; u8 link; @@ -183,225 +44,6 @@ struct ax88172_int_data { __le16 res3; } __packed; -static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - void *buf; - int err = -ENOMEM; - - netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - buf = kmalloc(size, GFP_KERNEL); - if (!buf) - goto out; - - err = usb_control_msg( - dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - cmd, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, - index, - buf, - size, - USB_CTRL_GET_TIMEOUT); - if (err == size) - memcpy(data, buf, size); - else if (err >= 0) - err = -EINVAL; - kfree(buf); - -out: - return err; -} - -static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - void *buf = NULL; - int err = -ENOMEM; - - netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - if (data) { - buf = kmemdup(data, size, GFP_KERNEL); - if (!buf) - goto out; - } - - err = usb_control_msg( - dev->udev, - usb_sndctrlpipe(dev->udev, 0), - cmd, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, - index, - buf, - size, - USB_CTRL_SET_TIMEOUT); - kfree(buf); - -out: - return err; -} - -static void asix_async_cmd_callback(struct urb *urb) -{ - struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; - int status = urb->status; - - if (status < 0) - printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d", - status); - - kfree(req); - usb_free_urb(urb); -} - -static void -asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, - u16 size, void *data) -{ - struct usb_ctrlrequest *req; - int status; - struct urb *urb; - - netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", - cmd, value, index, size); - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n"); - return; - } - - req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); - if (!req) { - netdev_err(dev->net, "Failed to allocate memory for control request\n"); - usb_free_urb(urb); - return; - } - - req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; - req->bRequest = cmd; - req->wValue = cpu_to_le16(value); - req->wIndex = cpu_to_le16(index); - req->wLength = cpu_to_le16(size); - - usb_fill_control_urb(urb, dev->udev, - usb_sndctrlpipe(dev->udev, 0), - (void *)req, data, size, - asix_async_cmd_callback, req); - - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status < 0) { - netdev_err(dev->net, "Error submitting the control message: status=%d\n", - status); - kfree(req); - usb_free_urb(urb); - } -} - -static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) -{ - int offset = 0; - - while (offset + sizeof(u32) < skb->len) { - struct sk_buff *ax_skb; - u16 size; - u32 header = get_unaligned_le32(skb->data + offset); - - offset += sizeof(u32); - - /* get the packet length */ - size = (u16) (header & 0x7ff); - if (size != ((~header >> 16) & 0x07ff)) { - netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n"); - return 0; - } - - if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || - (size + offset > skb->len)) { - netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n", - size); - return 0; - } - ax_skb = netdev_alloc_skb_ip_align(dev->net, size); - if (!ax_skb) - return 0; - - skb_put(ax_skb, size); - memcpy(ax_skb->data, skb->data + offset, size); - usbnet_skb_return(dev, ax_skb); - - offset += (size + 1) & 0xfffe; - } - - if (skb->len != offset) { - netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n", - skb->len); - return 0; - } - return 1; -} - -static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, - gfp_t flags) -{ - int padlen; - int headroom = skb_headroom(skb); - int tailroom = skb_tailroom(skb); - u32 packet_len; - u32 padbytes = 0xffff0000; - - padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; - - /* We need to push 4 bytes in front of frame (packet_len) - * and maybe add 4 bytes after the end (if padlen is 4) - * - * Avoid skb_copy_expand() expensive call, using following rules : - * - We are allowed to push 4 bytes in headroom if skb_header_cloned() - * is false (and if we have 4 bytes of headroom) - * - We are allowed to put 4 bytes at tail if skb_cloned() - * is false (and if we have 4 bytes of tailroom) - * - * TCP packets for example are cloned, but skb_header_release() - * was called in tcp stack, allowing us to use headroom for our needs. - */ - if (!skb_header_cloned(skb) && - !(padlen && skb_cloned(skb)) && - headroom + tailroom >= 4 + padlen) { - /* following should not happen, but better be safe */ - if (headroom < 4 || - tailroom < padlen) { - skb->data = memmove(skb->head + 4, skb->data, skb->len); - skb_set_tail_pointer(skb, skb->len); - } - } else { - struct sk_buff *skb2; - - skb2 = skb_copy_expand(skb, 4, padlen, flags); - dev_kfree_skb_any(skb); - skb = skb2; - if (!skb) - return NULL; - } - - packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; - skb_push(skb, 4); - cpu_to_le32s(&packet_len); - skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); - - if (padlen) { - cpu_to_le32s(&padbytes); - memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); - skb_put(skb, sizeof(padbytes)); - } - return skb; -} - static void asix_status(struct usbnet *dev, struct urb *urb) { struct ax88172_int_data *event; @@ -422,200 +64,6 @@ static void asix_status(struct usbnet *dev, struct urb *urb) } } -static inline int asix_set_sw_mii(struct usbnet *dev) -{ - int ret; - ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to enable software MII access\n"); - return ret; -} - -static inline int asix_set_hw_mii(struct usbnet *dev) -{ - int ret; - ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to enable hardware MII access\n"); - return ret; -} - -static inline int asix_get_phy_addr(struct usbnet *dev) -{ - u8 buf[2]; - int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); - - netdev_dbg(dev->net, "asix_get_phy_addr()\n"); - - if (ret < 0) { - netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); - goto out; - } - netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", - *((__le16 *)buf)); - ret = buf[1]; - -out: - return ret; -} - -static int asix_sw_reset(struct usbnet *dev, u8 flags) -{ - int ret; - - ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); - - return ret; -} - -static u16 asix_read_rx_ctl(struct usbnet *dev) -{ - __le16 v; - int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v); - - if (ret < 0) { - netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); - goto out; - } - ret = le16_to_cpu(v); -out: - return ret; -} - -static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); - ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", - mode, ret); - - return ret; -} - -static u16 asix_read_medium_status(struct usbnet *dev) -{ - __le16 v; - int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); - - if (ret < 0) { - netdev_err(dev->net, "Error reading Medium Status register: %02x\n", - ret); - return ret; /* TODO: callers not checking for error ret */ - } - - return le16_to_cpu(v); - -} - -static int asix_write_medium_mode(struct usbnet *dev, u16 mode) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); - ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", - mode, ret); - - return ret; -} - -static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) -{ - int ret; - - netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); - ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); - if (ret < 0) - netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", - value, ret); - - if (sleep) - msleep(sleep); - - return ret; -} - -/* - * AX88772 & AX88178 have a 16-bit RX_CTL value - */ -static void asix_set_multicast(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - u16 rx_ctl = AX_DEFAULT_RX_CTL; - - if (net->flags & IFF_PROMISC) { - rx_ctl |= AX_RX_CTL_PRO; - } else if (net->flags & IFF_ALLMULTI || - netdev_mc_count(net) > AX_MAX_MCAST) { - rx_ctl |= AX_RX_CTL_AMALL; - } else if (netdev_mc_empty(net)) { - /* just broadcast and directed */ - } else { - /* We use the 20 byte dev->data - * for our 8 byte filter buffer - * to avoid allocating memory that - * is tricky to free later */ - struct netdev_hw_addr *ha; - u32 crc_bits; - - memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); - - /* Build the multicast hash filter. */ - netdev_for_each_mc_addr(ha, net) { - crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; - data->multi_filter[crc_bits >> 3] |= - 1 << (crc_bits & 7); - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, - AX_MCAST_FILTER_SIZE, data->multi_filter); - - rx_ctl |= AX_RX_CTL_AM; - } - - asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); -} - -static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) -{ - struct usbnet *dev = netdev_priv(netdev); - __le16 res; - - mutex_lock(&dev->phy_mutex); - asix_set_sw_mii(dev); - asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, - (__u16)loc, 2, &res); - asix_set_hw_mii(dev); - mutex_unlock(&dev->phy_mutex); - - netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", - phy_id, loc, le16_to_cpu(res)); - - return le16_to_cpu(res); -} - -static void -asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) -{ - struct usbnet *dev = netdev_priv(netdev); - __le16 res = cpu_to_le16(val); - - netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", - phy_id, loc, val); - mutex_lock(&dev->phy_mutex); - asix_set_sw_mii(dev); - asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); - asix_set_hw_mii(dev); - mutex_unlock(&dev->phy_mutex); -} - /* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ static u32 asix_get_phyid(struct usbnet *dev) { @@ -645,88 +93,6 @@ static u32 asix_get_phyid(struct usbnet *dev) return phy_id; } -static void -asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) -{ - struct usbnet *dev = netdev_priv(net); - u8 opt; - - if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { - wolinfo->supported = 0; - wolinfo->wolopts = 0; - return; - } - wolinfo->supported = WAKE_PHY | WAKE_MAGIC; - wolinfo->wolopts = 0; - if (opt & AX_MONITOR_LINK) - wolinfo->wolopts |= WAKE_PHY; - if (opt & AX_MONITOR_MAGIC) - wolinfo->wolopts |= WAKE_MAGIC; -} - -static int -asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) -{ - struct usbnet *dev = netdev_priv(net); - u8 opt = 0; - - if (wolinfo->wolopts & WAKE_PHY) - opt |= AX_MONITOR_LINK; - if (wolinfo->wolopts & WAKE_MAGIC) - opt |= AX_MONITOR_MAGIC; - - if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, - opt, 0, 0, NULL) < 0) - return -EINVAL; - - return 0; -} - -static int asix_get_eeprom_len(struct net_device *net) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - - return data->eeprom_len; -} - -static int asix_get_eeprom(struct net_device *net, - struct ethtool_eeprom *eeprom, u8 *data) -{ - struct usbnet *dev = netdev_priv(net); - __le16 *ebuf = (__le16 *)data; - int i; - - /* Crude hack to ensure that we don't overwrite memory - * if an odd length is supplied - */ - if (eeprom->len % 2) - return -EINVAL; - - eeprom->magic = AX_EEPROM_MAGIC; - - /* ax8817x returns 2 bytes from eeprom on read */ - for (i=0; i < eeprom->len / 2; i++) { - if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, - eeprom->offset + i, 0, 2, &ebuf[i]) < 0) - return -EINVAL; - } - return 0; -} - -static void asix_get_drvinfo (struct net_device *net, - struct ethtool_drvinfo *info) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - - /* Inherit standard device info */ - usbnet_get_drvinfo(net, info); - strncpy (info->driver, DRIVER_NAME, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - info->eedump_len = data->eeprom_len; -} - static u32 asix_get_link(struct net_device *net) { struct usbnet *dev = netdev_priv(net); @@ -741,30 +107,6 @@ static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); } -static int asix_set_mac_address(struct net_device *net, void *p) -{ - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - struct sockaddr *addr = p; - - if (netif_running(net)) - return -EBUSY; - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); - - /* We use the 20 byte dev->data - * for our 6 byte mac buffer - * to avoid allocating memory that - * is tricky to free later */ - memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); - asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); - - return 0; -} - /* We need to override some ethtool_ops so we require our own structure so we don't interfere with other usbnet devices that may be connected at the same time. */ -- cgit v1.2.3 From 16626b0cc3d5afe250850f96759b241f8a403b52 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Fri, 13 Jul 2012 05:26:31 +0000 Subject: asix: Add a new driver for the AX88172A The Asix AX88172A is a USB 2.0 Ethernet interface that supports both an internal PHY as well as an external PHY (connected via MII). This patch adds a driver for the AX88172A and provides support for both modes and the phylib. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller --- drivers/net/usb/Makefile | 2 +- drivers/net/usb/asix.h | 5 + drivers/net/usb/asix_common.c | 12 +- drivers/net/usb/asix_devices.c | 6 + drivers/net/usb/ax88172a.c | 415 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 437 insertions(+), 3 deletions(-) create mode 100644 drivers/net/usb/ax88172a.c (limited to 'drivers/net/usb/asix.h') diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index a9490d9a4e98..bf063008c1af 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_USB_PEGASUS) += pegasus.o obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o -asix-y := asix_devices.o asix_common.o +asix-y := asix_devices.o asix_common.o ax88172a.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h index 790af241f197..77d9e4c1e235 100644 --- a/drivers/net/usb/asix.h +++ b/drivers/net/usb/asix.h @@ -74,6 +74,10 @@ #define AX_CMD_SW_PHY_STATUS 0x21 #define AX_CMD_SW_PHY_SELECT 0x22 +#define AX_PHY_SELECT_MASK (BIT(3) | BIT(2)) +#define AX_PHY_SELECT_INTERNAL 0 +#define AX_PHY_SELECT_EXTERNAL BIT(2) + #define AX_MONITOR_MODE 0x01 #define AX_MONITOR_LINK 0x02 #define AX_MONITOR_MAGIC 0x04 @@ -181,6 +185,7 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, int asix_set_sw_mii(struct usbnet *dev); int asix_set_hw_mii(struct usbnet *dev); +int asix_read_phy_addr(struct usbnet *dev, int internal); int asix_get_phy_addr(struct usbnet *dev); int asix_sw_reset(struct usbnet *dev, u8 flags); diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 3c1429a25ca4..336f75567091 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -258,8 +258,9 @@ int asix_set_hw_mii(struct usbnet *dev) return ret; } -int asix_get_phy_addr(struct usbnet *dev) +int asix_read_phy_addr(struct usbnet *dev, int internal) { + int offset = (internal ? 1 : 0); u8 buf[2]; int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); @@ -271,12 +272,19 @@ int asix_get_phy_addr(struct usbnet *dev) } netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", *((__le16 *)buf)); - ret = buf[1]; + ret = buf[offset]; out: return ret; } +int asix_get_phy_addr(struct usbnet *dev) +{ + /* return the address of the internal phy */ + return asix_read_phy_addr(dev, 1); +} + + int asix_sw_reset(struct usbnet *dev, u8 flags) { int ret; diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 8c513f7921f4..ed9403b0c437 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -872,6 +872,8 @@ static const struct driver_info ax88178_info = { .tx_fixup = asix_tx_fixup, }; +extern const struct driver_info ax88172a_info; + static const struct usb_device_id products [] = { { // Linksys USB200M @@ -997,6 +999,10 @@ static const struct usb_device_id products [] = { // Asus USB Ethernet Adapter USB_DEVICE (0x0b95, 0x7e2b), .driver_info = (unsigned long) &ax88772_info, +}, { + /* ASIX 88172a demo board */ + USB_DEVICE(0x0b95, 0x172a), + .driver_info = (unsigned long) &ax88172a_info, }, { }, // END }; diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c new file mode 100644 index 000000000000..534a144bd9e7 --- /dev/null +++ b/drivers/net/usb/ax88172a.c @@ -0,0 +1,415 @@ +/* + * ASIX AX88172A based USB 2.0 Ethernet Devices + * Copyright (C) 2012 OMICRON electronics GmbH + * + * Supports external PHYs via phylib. Based on the driver for the + * AX88772. Original copyrights follow: + * + * Copyright (C) 2003-2006 David Hollis + * Copyright (C) 2005 Phil Chang + * Copyright (C) 2006 James Painter + * Copyright (c) 2002-2003 TiVo Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "asix.h" +#include + +struct ax88172a_private { + struct mii_bus *mdio; + struct phy_device *phydev; + char phy_name[20]; + u16 phy_addr; + u16 oldmode; + int use_embdphy; +}; + +/* MDIO read and write wrappers for phylib */ +static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum) +{ + return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id, + regnum); +} + +static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, + u16 val) +{ + asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val); + return 0; +} + +static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd) +{ + if (!netif_running(net)) + return -EINVAL; + + if (!net->phydev) + return -ENODEV; + + return phy_mii_ioctl(net->phydev, rq, cmd); +} + +/* set MAC link settings according to information from phylib */ +static void ax88172a_adjust_link(struct net_device *netdev) +{ + struct phy_device *phydev = netdev->phydev; + struct usbnet *dev = netdev_priv(netdev); + struct ax88172a_private *priv = dev->driver_priv; + u16 mode = 0; + + if (phydev->link) { + mode = AX88772_MEDIUM_DEFAULT; + + if (phydev->duplex == DUPLEX_HALF) + mode &= ~AX_MEDIUM_FD; + + if (phydev->speed != SPEED_100) + mode &= ~AX_MEDIUM_PS; + } + + if (mode != priv->oldmode) { + asix_write_medium_mode(dev, mode); + priv->oldmode = mode; + netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n", + phydev->speed, phydev->duplex, mode); + phy_print_status(phydev); + } +} + +static void ax88172a_status(struct usbnet *dev, struct urb *urb) +{ + /* link changes are detected by polling the phy */ +} + +/* use phylib infrastructure */ +static int ax88172a_init_mdio(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + int ret, i; + + priv->mdio = mdiobus_alloc(); + if (!priv->mdio) { + netdev_err(dev->net, "Could not allocate MDIO bus\n"); + return -ENOMEM; + } + + priv->mdio->priv = (void *)dev; + priv->mdio->read = &asix_mdio_bus_read; + priv->mdio->write = &asix_mdio_bus_write; + priv->mdio->name = "Asix MDIO Bus"; + /* mii bus name is usb-- */ + snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d", + dev->udev->bus->busnum, dev->udev->devnum); + + priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!priv->mdio->irq) { + netdev_err(dev->net, "Could not allocate mdio->irq\n"); + ret = -ENOMEM; + goto mfree; + } + for (i = 0; i < PHY_MAX_ADDR; i++) + priv->mdio->irq[i] = PHY_POLL; + + ret = mdiobus_register(priv->mdio); + if (ret) { + netdev_err(dev->net, "Could not register MDIO bus\n"); + goto ifree; + } + + netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id); + return 0; + +ifree: + kfree(priv->mdio->irq); +mfree: + mdiobus_free(priv->mdio); + return ret; +} + +static void ax88172a_remove_mdio(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + + netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id); + mdiobus_unregister(priv->mdio); + kfree(priv->mdio->irq); + mdiobus_free(priv->mdio); +} + +static const struct net_device_ops ax88172a_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = ax88172a_ioctl, + .ndo_set_rx_mode = asix_set_multicast, +}; + +int ax88172a_get_settings(struct net_device *net, struct ethtool_cmd *cmd) +{ + if (!net->phydev) + return -ENODEV; + + return phy_ethtool_gset(net->phydev, cmd); +} + +int ax88172a_set_settings(struct net_device *net, struct ethtool_cmd *cmd) +{ + if (!net->phydev) + return -ENODEV; + + return phy_ethtool_sset(net->phydev, cmd); +} + +int ax88172a_nway_reset(struct net_device *net) +{ + if (!net->phydev) + return -ENODEV; + + return phy_start_aneg(net->phydev); +} + +static const struct ethtool_ops ax88172a_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = usbnet_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = ax88172a_get_settings, + .set_settings = ax88172a_set_settings, + .nway_reset = ax88172a_nway_reset, +}; + +static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy) +{ + int ret; + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD); + if (ret < 0) + goto err; + + msleep(150); + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + goto err; + + msleep(150); + + ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD); + if (ret < 0) + goto err; + + return 0; + +err: + return ret; +} + + +static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + struct asix_data *data = (struct asix_data *)&dev->data; + u8 buf[ETH_ALEN]; + struct ax88172a_private *priv; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev, intf); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + netdev_err(dev->net, "Could not allocate memory for private data\n"); + return -ENOMEM; + } + dev->driver_priv = priv; + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + netdev_err(dev->net, "Failed to read MAC address: %d\n", ret); + goto free; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + dev->net->netdev_ops = &ax88172a_netdev_ops; + dev->net->ethtool_ops = &ax88172a_ethtool_ops; + + /* are we using the internal or the external phy? */ + ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf); + if (ret < 0) { + netdev_err(dev->net, "Failed to read software interface selection register: %d\n", + ret); + goto free; + } + + netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]); + switch (buf[0] & AX_PHY_SELECT_MASK) { + case AX_PHY_SELECT_INTERNAL: + netdev_dbg(dev->net, "use internal phy\n"); + priv->use_embdphy = 1; + break; + case AX_PHY_SELECT_EXTERNAL: + netdev_dbg(dev->net, "use external phy\n"); + priv->use_embdphy = 0; + break; + default: + netdev_err(dev->net, "Interface mode not supported by driver\n"); + goto free; + } + + priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy); + ax88172a_reset_phy(dev, priv->use_embdphy); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + + /* init MDIO bus */ + ret = ax88172a_init_mdio(dev); + if (ret) + goto free; + + return 0; + +free: + kfree(priv); + return ret; +} + +static int ax88172a_stop(struct usbnet *dev) +{ + struct ax88172a_private *priv = dev->driver_priv; + + netdev_dbg(dev->net, "Stopping interface\n"); + + if (priv->phydev) { + netdev_info(dev->net, "Disconnecting from phy %s\n", + priv->phy_name); + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + } + + return 0; +} + +static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + struct ax88172a_private *priv = dev->driver_priv; + + ax88172a_remove_mdio(dev); + kfree(priv); +} + +static int ax88172a_reset(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + struct ax88172a_private *priv = dev->driver_priv; + int ret; + u16 rx_ctl; + + ax88172a_reset_phy(dev, priv->use_embdphy); + + msleep(150); + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = asix_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + msleep(150); + + ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, + AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, + AX88772_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); + goto out; + } + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); + + rx_ctl = asix_read_medium_status(dev); + netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n", + rx_ctl); + + /* Connect to PHY */ + snprintf(priv->phy_name, 20, PHY_ID_FMT, + priv->mdio->id, priv->phy_addr); + + priv->phydev = phy_connect(dev->net, priv->phy_name, + &ax88172a_adjust_link, + 0, PHY_INTERFACE_MODE_MII); + if (IS_ERR(priv->phydev)) { + netdev_err(dev->net, "Could not connect to PHY device %s\n", + priv->phy_name); + ret = PTR_ERR(priv->phydev); + goto out; + } + + netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name); + + /* During power-up, the AX88172A set the power down (BMCR_PDOWN) + * bit of the PHY. Bring the PHY up again. + */ + genphy_resume(priv->phydev); + phy_start(priv->phydev); + + return 0; + +out: + return ret; + +} + +const struct driver_info ax88172a_info = { + .description = "ASIX AX88172A USB 2.0 Ethernet", + .bind = ax88172a_bind, + .reset = ax88172a_reset, + .stop = ax88172a_stop, + .unbind = ax88172a_unbind, + .status = ax88172a_status, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | + FLAG_MULTI_PACKET, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; -- cgit v1.2.3 From ceb02c91dd76012e902799e0132ad3ad3e659394 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Thu, 19 Jul 2012 00:23:06 +0000 Subject: asix: Rework reading from EEPROM The current code for reading the EEPROM via ethtool in the asix driver has a few issues. It cannot handle odd length values (accesses must be aligned at 16 bit boundaries) and interprets the offset provided by ethtool as 16 bit word offset instead as byte offset. The new code for asix_get_eeprom() introduced by this patch is modeled after the code in drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c and provides read access to the entire EEPROM with arbitrary offsets and lengths. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller --- drivers/net/usb/asix.h | 5 ++--- drivers/net/usb/asix_common.c | 39 ++++++++++++++++++++++----------------- drivers/net/usb/asix_devices.c | 9 --------- drivers/net/usb/ax88172a.c | 3 --- 4 files changed, 24 insertions(+), 32 deletions(-) (limited to 'drivers/net/usb/asix.h') diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h index 77d9e4c1e235..fbff17748a1d 100644 --- a/drivers/net/usb/asix.h +++ b/drivers/net/usb/asix.h @@ -156,8 +156,7 @@ #define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ #define AX_EEPROM_MAGIC 0xdeadbeef -#define AX88172_EEPROM_LEN 0x40 -#define AX88772_EEPROM_LEN 0xff +#define AX_EEPROM_LEN 0x200 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ struct asix_data { @@ -165,7 +164,7 @@ struct asix_data { u8 mac_addr[ETH_ALEN]; u8 phymode; u8 ledmode; - u8 eeprom_len; + u8 res; }; int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 336f75567091..0b5b2d328a56 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -478,46 +478,51 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) int asix_get_eeprom_len(struct net_device *net) { - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - - return data->eeprom_len; + return AX_EEPROM_LEN; } int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, u8 *data) { struct usbnet *dev = netdev_priv(net); - __le16 *ebuf = (__le16 *)data; + u16 *eeprom_buff; + int first_word, last_word; int i; - /* Crude hack to ensure that we don't overwrite memory - * if an odd length is supplied - */ - if (eeprom->len % 2) + if (eeprom->len == 0) return -EINVAL; eeprom->magic = AX_EEPROM_MAGIC; + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1), + GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + /* ax8817x returns 2 bytes from eeprom on read */ - for (i=0; i < eeprom->len / 2; i++) { - if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, - eeprom->offset + i, 0, 2, &ebuf[i]) < 0) - return -EINVAL; + for (i = first_word; i <= last_word; i++) { + if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2, + &(eeprom_buff[i - first_word])) < 0) { + kfree(eeprom_buff); + return -EIO; + } } + + memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); return 0; } void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { - struct usbnet *dev = netdev_priv(net); - struct asix_data *data = (struct asix_data *)&dev->data; - /* Inherit standard device info */ usbnet_get_drvinfo(net, info); strncpy (info->driver, DRIVER_NAME, sizeof info->driver); strncpy (info->version, DRIVER_VERSION, sizeof info->version); - info->eedump_len = data->eeprom_len; + info->eedump_len = AX_EEPROM_LEN; } int asix_set_mac_address(struct net_device *net, void *p) diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index ed9403b0c437..658c08fe2c03 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -201,9 +201,6 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) u8 buf[ETH_ALEN]; int i; unsigned long gpio_bits = dev->driver_info->data; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88172_EEPROM_LEN; usbnet_get_endpoints(dev,intf); @@ -409,12 +406,9 @@ static const struct net_device_ops ax88772_netdev_ops = { static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { int ret, embd_phy; - struct asix_data *data = (struct asix_data *)&dev->data; u8 buf[ETH_ALEN]; u32 phyid; - data->eeprom_len = AX88772_EEPROM_LEN; - usbnet_get_endpoints(dev,intf); /* Get the MAC address */ @@ -767,9 +761,6 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; u8 buf[ETH_ALEN]; - struct asix_data *data = (struct asix_data *)&dev->data; - - data->eeprom_len = AX88772_EEPROM_LEN; usbnet_get_endpoints(dev,intf); diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index 3d0f8fa05386..97dce0f567d2 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -228,12 +228,9 @@ err: static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; - struct asix_data *data = (struct asix_data *)&dev->data; u8 buf[ETH_ALEN]; struct ax88172a_private *priv; - data->eeprom_len = AX88772_EEPROM_LEN; - usbnet_get_endpoints(dev, intf); priv = kzalloc(sizeof(*priv), GFP_KERNEL); -- cgit v1.2.3 From cb7b24cdc63a5489798589dca7bfcae0cff46332 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Thu, 19 Jul 2012 00:23:07 +0000 Subject: asix: Add support for programming the EEPROM This patch adds the asix_set_eeprom() function to provide support for programming the configuration EEPROM via ethtool. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller --- drivers/net/usb/asix.h | 2 ++ drivers/net/usb/asix_common.c | 81 ++++++++++++++++++++++++++++++++++++++++++ drivers/net/usb/asix_devices.c | 3 ++ drivers/net/usb/ax88172a.c | 1 + 4 files changed, 87 insertions(+) (limited to 'drivers/net/usb/asix.h') diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h index fbff17748a1d..e889631161b8 100644 --- a/drivers/net/usb/asix.h +++ b/drivers/net/usb/asix.h @@ -208,6 +208,8 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo); int asix_get_eeprom_len(struct net_device *net); int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, u8 *data); +int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data); void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info); diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 0b5b2d328a56..774d9ce2dafc 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -516,6 +516,87 @@ int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, return 0; } +int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, + u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + u16 *eeprom_buff; + int first_word, last_word; + int i; + int ret; + + netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n", + eeprom->len, eeprom->offset, eeprom->magic); + + if (eeprom->len == 0) + return -EINVAL; + + if (eeprom->magic != AX_EEPROM_MAGIC) + return -EINVAL; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1), + GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + /* align data to 16 bit boundaries, read the missing data from + the EEPROM */ + if (eeprom->offset & 1) { + ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2, + &(eeprom_buff[0])); + if (ret < 0) { + netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word); + goto free; + } + } + + if ((eeprom->offset + eeprom->len) & 1) { + ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2, + &(eeprom_buff[last_word - first_word])); + if (ret < 0) { + netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word); + goto free; + } + } + + memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len); + + /* write data to EEPROM */ + ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL); + if (ret < 0) { + netdev_err(net, "Failed to enable EEPROM write\n"); + goto free; + } + msleep(20); + + for (i = first_word; i <= last_word; i++) { + netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n", + i, eeprom_buff[i - first_word]); + ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i, + eeprom_buff[i - first_word], 0, NULL); + if (ret < 0) { + netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n", + i); + goto free; + } + msleep(20); + } + + ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL); + if (ret < 0) { + netdev_err(net, "Failed to disable EEPROM write\n"); + goto free; + } + + ret = 0; +free: + kfree(eeprom_buff); + return ret; +} + void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { /* Inherit standard device info */ diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 658c08fe2c03..4fd48df6b989 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -119,6 +119,7 @@ static const struct ethtool_ops ax88172_ethtool_ops = { .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .nway_reset = usbnet_nway_reset, @@ -258,6 +259,7 @@ static const struct ethtool_ops ax88772_ethtool_ops = { .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .nway_reset = usbnet_nway_reset, @@ -478,6 +480,7 @@ static const struct ethtool_ops ax88178_ethtool_ops = { .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .nway_reset = usbnet_nway_reset, diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index 97dce0f567d2..c8e0aa85fb8e 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -194,6 +194,7 @@ static const struct ethtool_ops ax88172a_ethtool_ops = { .set_wol = asix_set_wol, .get_eeprom_len = asix_get_eeprom_len, .get_eeprom = asix_get_eeprom, + .set_eeprom = asix_set_eeprom, .get_settings = ax88172a_get_settings, .set_settings = ax88172a_set_settings, .nway_reset = ax88172a_nway_reset, -- cgit v1.2.3