From a4eaed9f9a895b16bb2c54e0ff6b3c99404fec92 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Mon, 11 Feb 2019 15:25:26 +0100 Subject: net: phy: Mask-out non-compatible modes when setting the max-speed When setting a PHY's max speed using either the max-speed DT property or ethtool, we should mask-out all non-compatible modes according to the settings table, instead of just the 10/100BASET modes. Signed-off-by: Maxime Chevallier Suggested-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy-core.c | 45 +++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy_device.c | 53 -------------------------------------------- 2 files changed, 45 insertions(+), 53 deletions(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index cdea028d1328..855abf487279 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -4,6 +4,7 @@ */ #include #include +#include const char *phy_speed_to_str(int speed) { @@ -338,6 +339,50 @@ size_t phy_speeds(unsigned int *speeds, size_t size, return count; } +static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) +{ + const struct phy_setting *p; + int i; + + for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) { + if (p->speed > max_speed) + linkmode_clear_bit(p->bit, phydev->supported); + else + break; + } + + return 0; +} + +int phy_set_max_speed(struct phy_device *phydev, u32 max_speed) +{ + int err; + + err = __set_phy_supported(phydev, max_speed); + if (err) + return err; + + linkmode_copy(phydev->advertising, phydev->supported); + + return 0; +} +EXPORT_SYMBOL(phy_set_max_speed); + +void of_set_phy_supported(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; + u32 max_speed; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return; + + if (!node) + return; + + if (!of_property_read_u32(node, "max-speed", &max_speed)) + __set_phy_supported(phydev, max_speed); +} + /** * phy_resolve_aneg_linkmode - resolve the advertisements into phy settings * @phydev: The phy_device struct diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 2c61282a2726..64497ec293e1 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1949,44 +1949,6 @@ int genphy_loopback(struct phy_device *phydev, bool enable) } EXPORT_SYMBOL(genphy_loopback); -static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) -{ - switch (max_speed) { - case SPEED_10: - linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, - phydev->supported); - linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, - phydev->supported); - /* fall through */ - case SPEED_100: - linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - phydev->supported); - linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - phydev->supported); - break; - case SPEED_1000: - break; - default: - return -ENOTSUPP; - } - - return 0; -} - -int phy_set_max_speed(struct phy_device *phydev, u32 max_speed) -{ - int err; - - err = __set_phy_supported(phydev, max_speed); - if (err) - return err; - - linkmode_copy(phydev->advertising, phydev->supported); - - return 0; -} -EXPORT_SYMBOL(phy_set_max_speed); - /** * phy_remove_link_mode - Remove a supported link mode * @phydev: phy_device structure to remove link mode from @@ -2117,21 +2079,6 @@ bool phy_validate_pause(struct phy_device *phydev, } EXPORT_SYMBOL(phy_validate_pause); -static void of_set_phy_supported(struct phy_device *phydev) -{ - struct device_node *node = phydev->mdio.dev.of_node; - u32 max_speed; - - if (!IS_ENABLED(CONFIG_OF_MDIO)) - return; - - if (!node) - return; - - if (!of_property_read_u32(node, "max-speed", &max_speed)) - __set_phy_supported(phydev, max_speed); -} - static void of_set_phy_eee_broken(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; -- cgit v1.2.3