From 6798d03cfa5ed2f20a4cf33da1d31eba80b4714f Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Dec 2017 12:46:43 +0000 Subject: net: phy: marvell10g: add support for half duplex 100M and 10M Add support for half-duplex 100M and 10M copper connections by parsing the advertisment results rather than trying to decode the negotiated speed from one of the PHYs "vendor" registers. This allows us to decode the duplex as well, which means we can support half-duplex mode for the slower speeds. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/marvell10g.c | 37 ++++++++++++------------------------- 1 file changed, 12 insertions(+), 25 deletions(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index fa7245a573e2..8a0bd98fdec7 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -40,13 +40,6 @@ enum { */ MV_AN_CTRL1000 = 0x8000, /* 1000base-T control register */ MV_AN_STAT1000 = 0x8001, /* 1000base-T status register */ - - /* This register appears to reflect the copper status */ - MV_AN_RESULT = 0xa016, - MV_AN_RESULT_SPD_10 = BIT(12), - MV_AN_RESULT_SPD_100 = BIT(13), - MV_AN_RESULT_SPD_1000 = BIT(14), - MV_AN_RESULT_SPD_10000 = BIT(15), }; static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, @@ -160,12 +153,18 @@ static int mv3310_config_init(struct phy_device *phydev) if (val & MDIO_PMA_EXTABLE_1000BKX) __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, supported); - if (val & MDIO_PMA_EXTABLE_100BTX) + if (val & MDIO_PMA_EXTABLE_100BTX) { __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, supported); - if (val & MDIO_PMA_EXTABLE_10BT) + __set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, + supported); + } + if (val & MDIO_PMA_EXTABLE_10BT) { __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, supported); + __set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, + supported); + } } if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported)) @@ -325,22 +324,8 @@ static int mv3310_read_status(struct phy_device *phydev) phydev->lp_advertising |= mii_stat1000_to_ethtool_lpa_t(val); - if (phydev->autoneg == AUTONEG_ENABLE) { - val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_RESULT); - if (val < 0) - return val; - - if (val & MV_AN_RESULT_SPD_10000) - phydev->speed = SPEED_10000; - else if (val & MV_AN_RESULT_SPD_1000) - phydev->speed = SPEED_1000; - else if (val & MV_AN_RESULT_SPD_100) - phydev->speed = SPEED_100; - else if (val & MV_AN_RESULT_SPD_10) - phydev->speed = SPEED_10; - - phydev->duplex = DUPLEX_FULL; - } + if (phydev->autoneg == AUTONEG_ENABLE) + phy_resolve_aneg_linkmode(phydev); } if (phydev->autoneg != AUTONEG_ENABLE) { @@ -382,7 +367,9 @@ static struct phy_driver mv3310_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "mv88x3310", .features = SUPPORTED_10baseT_Full | + SUPPORTED_10baseT_Half | SUPPORTED_100baseT_Full | + SUPPORTED_100baseT_Half | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_TP | -- cgit v1.2.3