From a9b8943ee129e11045862d6d6e25c5b63c95403c Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 25 Mar 2014 07:45:26 +0000 Subject: ixgbe: remove vlan_filter_disable and enable functions Previously these functions handled stripping setup as well, but this has already been removed from these functions. Rather than encapsulating this into a function, we can just do the work directly in set_rx_mode. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 40 ++++----------------------- 1 file changed, 6 insertions(+), 34 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 7a67a9fac2a3..220937ba4e59 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3767,35 +3767,6 @@ static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev, return 0; } -/** - * ixgbe_vlan_filter_disable - helper to disable hw vlan filtering - * @adapter: driver data - */ -static void ixgbe_vlan_filter_disable(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 vlnctrl; - - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); -} - -/** - * ixgbe_vlan_filter_enable - helper to enable hw vlan filtering - * @adapter: driver data - */ -static void ixgbe_vlan_filter_enable(struct ixgbe_adapter *adapter) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 vlnctrl; - - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - vlnctrl |= IXGBE_VLNCTRL_VFE; - vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); -} - /** * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping * @adapter: driver data @@ -3933,11 +3904,13 @@ void ixgbe_set_rx_mode(struct net_device *netdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; + u32 vlnctrl; int count; /* Check for Promiscuous and All Multicast modes */ fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); /* set all bits that we expect to always be set */ fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */ @@ -3947,7 +3920,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev) /* clear the bits we are changing the status of */ fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); - + vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); if (netdev->flags & IFF_PROMISC) { hw->addr_ctrl.user_set_promisc = true; fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); @@ -3958,15 +3931,13 @@ void ixgbe_set_rx_mode(struct net_device *netdev) */ if (!(adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED | IXGBE_FLAG_SRIOV_ENABLED))) - ixgbe_vlan_filter_disable(adapter); - else - ixgbe_vlan_filter_enable(adapter); + vlnctrl |= (IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); } else { if (netdev->flags & IFF_ALLMULTI) { fctrl |= IXGBE_FCTRL_MPE; vmolr |= IXGBE_VMOLR_MPE; } - ixgbe_vlan_filter_enable(adapter); + vlnctrl |= IXGBE_VLNCTRL_VFE; hw->addr_ctrl.user_set_promisc = false; } @@ -4010,6 +3981,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev) /* NOTE: VLAN filtering is disabled by setting PROMISC */ } + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) -- cgit v1.2.3