From eb9def61be7197669cab51f43789b53aa7a69509 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 22 Dec 2016 14:32:58 +0200 Subject: net/mlx4_en: Fix user prio field in XDP forward The user prio field is wrong (and overflows) in the XDP forward flow. This is a result of a bad value for num_tx_rings_p_up, which should account all XDP TX rings, as they operate for the same user prio. Signed-off-by: Tariq Toukan Reported-by: Martin KaFai Lau Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index bcd955339058..edbe200ac2fa 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1638,7 +1638,8 @@ int mlx4_en_start_port(struct net_device *dev) /* Configure tx cq's and rings */ for (t = 0 ; t < MLX4_EN_NUM_TX_TYPES; t++) { - u8 num_tx_rings_p_up = t == TX ? priv->num_tx_rings_p_up : 1; + u8 num_tx_rings_p_up = t == TX ? + priv->num_tx_rings_p_up : priv->tx_ring_num[t]; for (i = 0; i < priv->tx_ring_num[t]; i++) { /* Configure cq */ -- cgit v1.2.3 From e6afb1ad88feddf2347ea779cfaf4d03d3cd40b6 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 23 Dec 2016 19:56:56 -0800 Subject: net: korina: Fix NAPI versus resources freeing Commit beb0babfb77e ("korina: disable napi on close and restart") introduced calls to napi_disable() that were missing before, unfortunately this leaves a small window during which NAPI has a chance to run, yet we just freed resources since korina_free_ring() has been called: Fix this by disabling NAPI first then freeing resource, and make sure that we also cancel the restart task before doing the resource freeing. Fixes: beb0babfb77e ("korina: disable napi on close and restart") Reported-by: Alexandros C. Couloumbis Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/korina.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index cbeea915f026..8037426ec50f 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -900,10 +900,10 @@ static void korina_restart_task(struct work_struct *work) DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR, &lp->rx_dma_regs->dmasm); - korina_free_ring(dev); - napi_disable(&lp->napi); + korina_free_ring(dev); + if (korina_init(dev) < 0) { printk(KERN_ERR "%s: cannot restart device\n", dev->name); return; @@ -1064,12 +1064,12 @@ static int korina_close(struct net_device *dev) tmp = tmp | DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR; writel(tmp, &lp->rx_dma_regs->dmasm); - korina_free_ring(dev); - napi_disable(&lp->napi); cancel_work_sync(&lp->restart_task); + korina_free_ring(dev); + free_irq(lp->rx_irq, dev); free_irq(lp->tx_irq, dev); free_irq(lp->ovr_irq, dev); -- cgit v1.2.3 From 610c908773d30907c950ca3b2ee8ac4b2813537b Mon Sep 17 00:00:00 2001 From: Chun-Hao Lin Date: Tue, 27 Dec 2016 16:29:43 +0800 Subject: r8169: add support for RTL8168 series add-on card. This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index f9b97f5946f8..44389c90056a 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -326,6 +326,7 @@ enum cfg_version { static const struct pci_device_id rtl8169_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8129), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8136), 0, 0, RTL_CFG_2 }, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8161), 0, 0, RTL_CFG_1 }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 }, -- cgit v1.2.3 From 5799fc905930f866c7d32aaf81b31f8027297506 Mon Sep 17 00:00:00 2001 From: "Kweh, Hock Leong" Date: Wed, 28 Dec 2016 04:07:41 +0800 Subject: net: stmmac: fix incorrect bit set in gmac4 mdio addr register Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong Acked-By: Joao Pinto Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index fda01f770eff..b0344c213752 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -116,7 +116,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, unsigned int mii_address = priv->hw->mii.addr; unsigned int mii_data = priv->hw->mii.data; - u32 value = MII_WRITE | MII_BUSY; + u32 value = MII_BUSY; value |= (phyaddr << priv->hw->mii.addr_shift) & priv->hw->mii.addr_mask; @@ -126,6 +126,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, & priv->hw->mii.clk_csr_mask; if (priv->plat->has_gmac4) value |= MII_GMAC4_WRITE; + else + value |= MII_WRITE; /* Wait until any existing MII operation is complete */ if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) -- cgit v1.2.3