From 402168b4c2dc0734b8fbd282eff77da0275c5129 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Tue, 28 Feb 2017 15:02:51 -0600 Subject: amd-xgbe: Stop the PHY before releasing interrupts Some configurations require the use of the hardware's MDIO support to communicate with external PHYs. The MDIO commands indicate completion through the device interrupt. When bringing down the device the interrupts were released before stopping the external PHY, resulting in MDIO command timeouts. Move the stopping of the PHY to before the releasing of the interrupts. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 3aa457c8ca21..248f60d171a5 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -1131,12 +1131,12 @@ static void xgbe_stop(struct xgbe_prv_data *pdata) hw_if->disable_tx(pdata); hw_if->disable_rx(pdata); + phy_if->phy_stop(pdata); + xgbe_free_irqs(pdata); xgbe_napi_disable(pdata, 1); - phy_if->phy_stop(pdata); - hw_if->exit(pdata); channel = pdata->channel; -- cgit v1.2.3