From 178e5f57a8d8f8fc5799a624b96fc31ef9a29ffa Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Fri, 22 Dec 2017 17:12:09 +0800 Subject: net: fec: unmap the xmit buffer that are not transferred by DMA The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 610573855213..8184d2fca9be 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -818,6 +818,12 @@ static void fec_enet_bd_init(struct net_device *dev) for (i = 0; i < txq->bd.ring_size; i++) { /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = cpu_to_fec16(0); + if (bdp->cbd_bufaddr && + !IS_TSO_HEADER(txq, fec32_to_cpu(bdp->cbd_bufaddr))) + dma_unmap_single(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), + fec16_to_cpu(bdp->cbd_datlen), + DMA_TO_DEVICE); if (txq->tx_skbuff[i]) { dev_kfree_skb_any(txq->tx_skbuff[i]); txq->tx_skbuff[i] = NULL; -- cgit v1.2.3