From a7f7f6248d9740d710fd6bd190293fe5e16410ac Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 14 Jun 2020 01:50:22 +0900 Subject: treewide: replace '---help---' in Kconfig files with 'help' Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada --- drivers/net/ethernet/realtek/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet/realtek') diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig index 5e0b9d2f14f7..93d9df55b361 100644 --- a/drivers/net/ethernet/realtek/Kconfig +++ b/drivers/net/ethernet/realtek/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_REALTEK bool "Realtek devices" default y depends on PCI || (PARPORT && X86) - ---help--- + help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the @@ -21,7 +21,7 @@ config ATP tristate "AT-LAN-TEC/RealTek pocket adapter support" depends on PARPORT && X86 select CRC32 - ---help--- + help This is a network (Ethernet) device which attaches to your parallel port. Read the file if you want to use this. If you intend to use this driver, you @@ -36,7 +36,7 @@ config 8139CP depends on PCI select CRC32 select MII - ---help--- + help This is a driver for the Fast Ethernet PCI network cards based on the RTL8139C+ chips. If you have one of those, say Y here. @@ -48,7 +48,7 @@ config 8139TOO depends on PCI select CRC32 select MII - ---help--- + help This is a driver for the Fast Ethernet PCI network cards based on the RTL 8129/8130/8139 chips. If you have one of those, say Y here. @@ -59,7 +59,7 @@ config 8139TOO_PIO bool "Use PIO instead of MMIO" default y depends on 8139TOO - ---help--- + help This instructs the driver to use programmed I/O ports (PIO) instead of PCI shared memory (MMIO). This can possibly solve some problems in case your mainboard has memory consistency issues. If unsure, @@ -68,7 +68,7 @@ config 8139TOO_PIO config 8139TOO_TUNE_TWISTER bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)" depends on 8139TOO - ---help--- + help This implements a function which might come in handy in case you are using low quality on long cabling. It is required for RealTek RTL-8139 revision K boards, and totally unused otherwise. It tries @@ -79,7 +79,7 @@ config 8139TOO_TUNE_TWISTER config 8139TOO_8129 bool "Support for older RTL-8129/8130 boards" depends on 8139TOO - ---help--- + help This enables support for the older and uncommon RTL-8129 and RTL-8130 chips, which support MII via an external transceiver, instead of an internal one. Disabling this option will save some @@ -88,7 +88,7 @@ config 8139TOO_8129 config 8139_OLD_RX_RESET bool "Use older RX-reset method" depends on 8139TOO - ---help--- + help The 8139too driver was recently updated to contain a more rapid reset sequence, in the face of severe receive errors. This "new" RX-reset method should be adequate for all boards. But if you @@ -102,7 +102,7 @@ config R8169 select CRC32 select PHYLIB select REALTEK_PHY - ---help--- + help Say Y here if you have a Realtek Ethernet adapter belonging to the following families: RTL8169 Gigabit Ethernet -- cgit v1.2.3