From fe56b9e6a8d957d6a20729d626027f800c17a2da Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 26 Oct 2015 11:02:25 +0200 Subject: qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 232 ++++++++++++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 drivers/net/ethernet/qlogic/qed/qed_mcp.h (limited to 'drivers/net/ethernet/qlogic/qed/qed_mcp.h') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h new file mode 100644 index 000000000000..230c2550dc89 --- /dev/null +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h @@ -0,0 +1,232 @@ +/* QLogic qed NIC Driver + * Copyright (c) 2015 QLogic Corporation + * + * This software is available under the terms of the GNU General Public License + * (GPL) Version 2, available from the file COPYING in the main directory of + * this source tree. + */ + +#ifndef _QED_MCP_H +#define _QED_MCP_H + +#include +#include +#include +#include +#include "qed_hsi.h" + +struct qed_mcp_function_info { + u8 pause_on_host; + + enum qed_pci_personality protocol; + + u8 bandwidth_min; + u8 bandwidth_max; + + u8 mac[ETH_ALEN]; + + u64 wwn_port; + u64 wwn_node; + +#define QED_MCP_VLAN_UNSET (0xffff) + u16 ovlan; +}; + +struct qed_mcp_nvm_common { + u32 offset; + u32 param; + u32 resp; + u32 cmd; +}; + +struct qed_mcp_drv_version { + u32 version; + u8 name[MCP_DRV_VER_STR_SIZE - 4]; +}; + +/** + * @brief Get the management firmware version value + * + * @param cdev - qed dev pointer + * @param mfw_ver - mfw version value + * + * @return int - 0 - operation was successul. + */ +int qed_mcp_get_mfw_ver(struct qed_dev *cdev, + u32 *mfw_ver); + +/** + * @brief General function for sending commands to the MCP + * mailbox. It acquire mutex lock for the entire + * operation, from sending the request until the MCP + * response. Waiting for MCP response will be checked up + * to 5 seconds every 5ms. + * + * @param p_hwfn - hw function + * @param p_ptt - PTT required for register access + * @param cmd - command to be sent to the MCP. + * @param param - Optional param + * @param o_mcp_resp - The MCP response code (exclude sequence). + * @param o_mcp_param- Optional parameter provided by the MCP + * response + * @return int - 0 - operation + * was successul. + */ +int qed_mcp_cmd(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + u32 cmd, + u32 param, + u32 *o_mcp_resp, + u32 *o_mcp_param); + +/** + * @brief - drains the nig, allowing completion to pass in case of pauses. + * (Should be called only from sleepable context) + * + * @param p_hwfn + * @param p_ptt + */ +int qed_mcp_drain(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief Send driver version to MFW + * + * @param p_hwfn + * @param p_ptt + * @param version - Version value + * @param name - Protocol driver name + * + * @return int - 0 - operation was successul. + */ +int +qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + struct qed_mcp_drv_version *p_ver); + +/* Using hwfn number (and not pf_num) is required since in CMT mode, + * same pf_num may be used by two different hwfn + * TODO - this shouldn't really be in .h file, but until all fields + * required during hw-init will be placed in their correct place in shmem + * we need it in qed_dev.c [for readin the nvram reflection in shmem]. + */ +#define MCP_PF_ID_BY_REL(p_hwfn, rel_pfid) (QED_IS_BB((p_hwfn)->cdev) ? \ + ((rel_pfid) | \ + ((p_hwfn)->abs_pf_id & 1) << 3) : \ + rel_pfid) +#define MCP_PF_ID(p_hwfn) MCP_PF_ID_BY_REL(p_hwfn, (p_hwfn)->rel_pf_id) + +/* TODO - this is only correct as long as only BB is supported, and + * no port-swapping is implemented; Afterwards we'll need to fix it. + */ +#define MFW_PORT(_p_hwfn) ((_p_hwfn)->abs_pf_id % \ + ((_p_hwfn)->cdev->num_ports_in_engines * 2)) +struct qed_mcp_info { + struct mutex mutex; /* MCP access lock */ + u32 public_base; + u32 drv_mb_addr; + u32 mfw_mb_addr; + u32 port_addr; + u16 drv_mb_seq; + u16 drv_pulse_seq; + struct qed_mcp_function_info func_info; + + u8 *mfw_mb_cur; + u8 *mfw_mb_shadow; + u16 mfw_mb_length; + u16 mcp_hist; +}; + +/** + * @brief Initialize the interface with the MCP + * + * @param p_hwfn - HW func + * @param p_ptt - PTT required for register access + * + * @return int + */ +int qed_mcp_cmd_init(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief Initialize the port interface with the MCP + * + * @param p_hwfn + * @param p_ptt + * Can only be called after `num_ports_in_engines' is set + */ +void qed_mcp_cmd_port_init(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); +/** + * @brief Releases resources allocated during the init process. + * + * @param p_hwfn - HW func + * @param p_ptt - PTT required for register access + * + * @return int + */ + +int qed_mcp_free(struct qed_hwfn *p_hwfn); + +/** + * @brief Sends a LOAD_REQ to the MFW, and in case operation + * succeed, returns whether this PF is the first on the + * chip/engine/port or function. This function should be + * called when driver is ready to accept MFW events after + * Storms initializations are done. + * + * @param p_hwfn - hw function + * @param p_ptt - PTT required for register access + * @param p_load_code - The MCP response param containing one + * of the following: + * FW_MSG_CODE_DRV_LOAD_ENGINE + * FW_MSG_CODE_DRV_LOAD_PORT + * FW_MSG_CODE_DRV_LOAD_FUNCTION + * @return int - + * 0 - Operation was successul. + * -EBUSY - Operation failed + */ +int qed_mcp_load_req(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + u32 *p_load_code); + +/** + * @brief Read the MFW mailbox into Current buffer. + * + * @param p_hwfn + * @param p_ptt + */ +void qed_mcp_read_mb(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief - calls during init to read shmem of all function-related info. + * + * @param p_hwfn + * + * @param return 0 upon success. + */ +int qed_mcp_fill_shmem_func_info(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief - Reset the MCP using mailbox command. + * + * @param p_hwfn + * @param p_ptt + * + * @param return 0 upon success. + */ +int qed_mcp_reset(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief indicates whether the MFW objects [under mcp_info] are accessible + * + * @param p_hwfn + * + * @return true iff MFW is running and mcp_info is initialized + */ +bool qed_mcp_is_init(struct qed_hwfn *p_hwfn); + +#endif -- cgit v1.2.3