From 2bb19d6e077190bafbfd50f3793333af3f07a7b1 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Fri, 15 May 2020 17:51:19 -0700 Subject: ice: Fix transmit for all software offloaded VLANs Currently the driver does not recognize when there is an 802.1AD VLAN tag right after the dmac/smac (outermost VLAN tag). If any DCB map is applied and/or DCB is enabled this is causing the hardware to insert a VLAN 0 tag after the 802.1AD VLAN tag that is already in the packet. Fix this by preventing VLAN tag 0 from being added when any VLAN is already present after dmac/smac (software offloaded) or skb (hardware offloaded). Signed-off-by: Brett Creeley Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 28 +++++++---------- drivers/net/ethernet/intel/ice/ice_dcb_lib.h | 2 +- drivers/net/ethernet/intel/ice/ice_txrx.c | 45 +++++++--------------------- 3 files changed, 21 insertions(+), 54 deletions(-) (limited to 'drivers/net/ethernet/intel') diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c index 3c7f604c0c49..979af197f8a3 100644 --- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c @@ -791,39 +791,31 @@ void ice_update_dcb_stats(struct ice_pf *pf) * ice_tx_prepare_vlan_flags_dcb - prepare VLAN tagging for DCB * @tx_ring: ring to send buffer on * @first: pointer to struct ice_tx_buf + * + * This should not be called if the outer VLAN is software offloaded as the VLAN + * tag will already be configured with the correct ID and priority bits */ -int +void ice_tx_prepare_vlan_flags_dcb(struct ice_ring *tx_ring, struct ice_tx_buf *first) { struct sk_buff *skb = first->skb; if (!test_bit(ICE_FLAG_DCB_ENA, tx_ring->vsi->back->flags)) - return 0; + return; /* Insert 802.1p priority into VLAN header */ - if ((first->tx_flags & (ICE_TX_FLAGS_HW_VLAN | ICE_TX_FLAGS_SW_VLAN)) || + if ((first->tx_flags & ICE_TX_FLAGS_HW_VLAN) || skb->priority != TC_PRIO_CONTROL) { first->tx_flags &= ~ICE_TX_FLAGS_VLAN_PR_M; /* Mask the lower 3 bits to set the 802.1p priority */ first->tx_flags |= (skb->priority & 0x7) << ICE_TX_FLAGS_VLAN_PR_S; - if (first->tx_flags & ICE_TX_FLAGS_SW_VLAN) { - struct vlan_ethhdr *vhdr; - int rc; - - rc = skb_cow_head(skb, 0); - if (rc < 0) - return rc; - vhdr = (struct vlan_ethhdr *)skb->data; - vhdr->h_vlan_TCI = htons(first->tx_flags >> - ICE_TX_FLAGS_VLAN_S); - } else { - first->tx_flags |= ICE_TX_FLAGS_HW_VLAN; - } + /* if this is not already set it means a VLAN 0 + priority needs + * to be offloaded + */ + first->tx_flags |= ICE_TX_FLAGS_HW_VLAN; } - - return 0; } /** diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h index 7c42324494d2..323238669572 100644 --- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h +++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h @@ -27,7 +27,7 @@ void ice_pf_dcb_recfg(struct ice_pf *pf); void ice_vsi_cfg_dcb_rings(struct ice_vsi *vsi); int ice_init_pf_dcb(struct ice_pf *pf, bool locked); void ice_update_dcb_stats(struct ice_pf *pf); -int +void ice_tx_prepare_vlan_flags_dcb(struct ice_ring *tx_ring, struct ice_tx_buf *first); void diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index cda7e05bd8ae..abdb137c8bb7 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -2053,49 +2053,25 @@ int ice_tx_csum(struct ice_tx_buf *first, struct ice_tx_offload_params *off) * * Checks the skb and set up correspondingly several generic transmit flags * related to VLAN tagging for the HW, such as VLAN, DCB, etc. - * - * Returns error code indicate the frame should be dropped upon error and the - * otherwise returns 0 to indicate the flags has been set properly. */ -static int +static void ice_tx_prepare_vlan_flags(struct ice_ring *tx_ring, struct ice_tx_buf *first) { struct sk_buff *skb = first->skb; - __be16 protocol = skb->protocol; - - if (protocol == htons(ETH_P_8021Q) && - !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) { - /* when HW VLAN acceleration is turned off by the user the - * stack sets the protocol to 8021q so that the driver - * can take any steps required to support the SW only - * VLAN handling. In our case the driver doesn't need - * to take any further steps so just set the protocol - * to the encapsulated ethertype. - */ - skb->protocol = vlan_get_protocol(skb); - return 0; - } - /* if we have a HW VLAN tag being added, default to the HW one */ + /* nothing left to do, software offloaded VLAN */ + if (!skb_vlan_tag_present(skb) && eth_type_vlan(skb->protocol)) + return; + + /* currently, we always assume 802.1Q for VLAN insertion as VLAN + * insertion for 802.1AD is not supported + */ if (skb_vlan_tag_present(skb)) { first->tx_flags |= skb_vlan_tag_get(skb) << ICE_TX_FLAGS_VLAN_S; first->tx_flags |= ICE_TX_FLAGS_HW_VLAN; - } else if (protocol == htons(ETH_P_8021Q)) { - struct vlan_hdr *vhdr, _vhdr; - - /* for SW VLAN, check the next protocol and store the tag */ - vhdr = (struct vlan_hdr *)skb_header_pointer(skb, ETH_HLEN, - sizeof(_vhdr), - &_vhdr); - if (!vhdr) - return -EINVAL; - - first->tx_flags |= ntohs(vhdr->h_vlan_TCI) << - ICE_TX_FLAGS_VLAN_S; - first->tx_flags |= ICE_TX_FLAGS_SW_VLAN; } - return ice_tx_prepare_vlan_flags_dcb(tx_ring, first); + ice_tx_prepare_vlan_flags_dcb(tx_ring, first); } /** @@ -2403,8 +2379,7 @@ ice_xmit_frame_ring(struct sk_buff *skb, struct ice_ring *tx_ring) first->tx_flags = 0; /* prepare the VLAN tagging flags for Tx */ - if (ice_tx_prepare_vlan_flags(tx_ring, first)) - goto out_drop; + ice_tx_prepare_vlan_flags(tx_ring, first); /* set up TSO offload */ tso = ice_tso(first, &offload); -- cgit v1.2.3