From 6b50d038e7c668eb60b18c2fba8982a22e36527e Mon Sep 17 00:00:00 2001 From: Andrew Ruder Date: Wed, 4 Jun 2014 17:28:44 -0500 Subject: dm9000: acquire irq flags from device tree The DM9000 supports both active high interrupts and active low interrupts. This is configured via the attached EEPROM. In the device-tree case, make sure that the DM9000 driver passes the correct flags to request_irq. Signed-off-by: Andrew Ruder Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet/davicom') diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 8c4b93be333b..1bdf69985c13 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1291,6 +1291,9 @@ dm9000_open(struct net_device *dev) /* If there is no IRQ type specified, default to something that * may work, and tell the user that this is a problem */ + if (irqflags == IRQF_TRIGGER_NONE) + irqflags = irq_get_trigger_type(dev->irq); + if (irqflags == IRQF_TRIGGER_NONE) dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n"); -- cgit v1.2.3