From e9460a9e811dddd9ea1ae9838d9b53bfaf78cd2c Mon Sep 17 00:00:00 2001 From: Jaccon Bastiaansen Date: Thu, 26 Jan 2012 21:46:15 +0100 Subject: CS89x0 : add platform driver support The CS89x0 ethernet controller is used on a number of evaluation boards, such as the MX31ADS. The current driver has memory address and IRQ settings for each board on which this controller is used. Driver updates are therefore required to support other boards that also use the CS89x0. To avoid these driver updates, a better mechanism (platform driver support) is added to communicate the board dependent settings to the driver. Signed-off-by: Jaccon Bastiaansen Acked-by: David S. Miller Signed-off-by: Sascha Hauer --- drivers/net/ethernet/cirrus/Kconfig | 19 +++-- drivers/net/ethernet/cirrus/cs89x0.c | 137 +++++++++++++++++++++++++++++++---- 2 files changed, 135 insertions(+), 21 deletions(-) (limited to 'drivers/net/ethernet/cirrus') diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 1f8648f099c7..8388e36cf08f 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -5,8 +5,7 @@ config NET_VENDOR_CIRRUS bool "Cirrus devices" default y - depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \ - || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC + depends on ISA || EISA || ARM || MAC ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -21,8 +20,7 @@ if NET_VENDOR_CIRRUS config CS89x0 tristate "CS89x0 support" - depends on (ISA || EISA || MACH_IXDP2351 \ - || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440) + depends on ISA || EISA || ARM ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -33,10 +31,15 @@ config CS89x0 To compile this driver as a module, choose M here. The module will be called cs89x0. -config CS89x0_NONISA_IRQ - def_bool y - depends on CS89x0 != n - depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440 +config CS89x0_PLATFORM + bool "CS89x0 platform driver support" + depends on CS89x0 + help + Say Y to compile the cs89x0 driver as a platform driver. This + makes this driver suitable for use on certain evaluation boards + such as the iMX21ADS. + + If you are unsure, say N. config EP93XX_ETH tristate "EP93xx Ethernet support" diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index f328da24c8fa..6b3cd24eb454 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -100,9 +100,6 @@ */ -/* Always include 'config.h' first in case the user wants to turn on - or override something. */ -#include /* * Set this to zero to disable DMA code @@ -131,9 +128,12 @@ */ +#include +#include #include #include #include +#include #include #include #include @@ -151,6 +151,7 @@ #include #include #include +#include #if ALLOW_DMA #include #endif @@ -174,26 +175,32 @@ static char version[] __initdata = them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ #if defined(CONFIG_MACH_IXDP2351) +#define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #elif defined(CONFIG_ARCH_IXDP2X01) +#define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #elif defined(CONFIG_MACH_QQ2440) +#define CS89x0_NONISA_IRQ #include static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 }; static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 }; #elif defined(CONFIG_MACH_MX31ADS) +#define CS89x0_NONISA_IRQ #include static unsigned int netcard_portlist[] __used __initdata = { PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0 }; static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0}; #else +#ifndef CONFIG_CS89x0_PLATFORM static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {10,11,12,5}; #endif +#endif #if DEBUGGING static unsigned int net_debug = DEBUGGING; @@ -236,11 +243,16 @@ struct net_local { unsigned char *end_dma_buff; /* points to the end of the buffer */ unsigned char *rx_dma_ptr; /* points to the next packet */ #endif +#ifdef CONFIG_CS89x0_PLATFORM + void __iomem *virt_addr;/* Virtual address for accessing the CS89x0. */ + unsigned long phys_addr;/* Physical address for accessing the CS89x0. */ + unsigned long size; /* Length of CS89x0 memory region. */ +#endif }; /* Index to functions, as function prototypes. */ -static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular); +static int cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular); static int net_open(struct net_device *dev); static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev); static irqreturn_t net_interrupt(int irq, void *dev_id); @@ -294,6 +306,7 @@ static int __init media_fn(char *str) __setup("cs89x0_media=", media_fn); +#ifndef CONFIG_CS89x0_PLATFORM /* Check for a network adaptor of this type, and return '0' iff one exists. If dev->base_addr == 0, probe all likely locations. If dev->base_addr == 1, always return failure. @@ -343,6 +356,7 @@ out: return ERR_PTR(err); } #endif +#endif #if defined(CONFIG_MACH_IXDP2351) static u16 @@ -504,7 +518,7 @@ static const struct net_device_ops net_ops = { */ static int __init -cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) +cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular) { struct net_local *lp = netdev_priv(dev); static unsigned version_printed; @@ -537,7 +551,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) /* Grab the region so we can find another board if autoIRQ fails. */ /* WTF is going on here? */ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { - printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n", + printk(KERN_ERR "%s: request_region(0x%lx, 0x%x) failed\n", DRV_NAME, ioaddr, NETCARD_IO_EXTENT); retval = -EBUSY; goto out1; @@ -549,7 +563,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) will skip the test for the ADD_PORT. */ if (ioaddr & 1) { if (net_debug > 1) - printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr); + printk(KERN_INFO "%s: odd ioaddr 0x%lx\n", dev->name, ioaddr); if ((ioaddr & 2) != 2) if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) { printk(KERN_ERR "%s: bad signature 0x%x\n", @@ -560,13 +574,13 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } ioaddr &= ~3; - printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n", + printk(KERN_DEBUG "PP_addr at %lx[%x]: 0x%x\n", ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT)); writeword(ioaddr, ADD_PORT, PP_ChipID); tmp = readword(ioaddr, DATA_PORT); if (tmp != CHIP_EISA_ID_SIG) { - printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!=" + printk(KERN_DEBUG "%s: incorrect signature at %lx[%x]: 0x%x!=" CHIP_EISA_ID_SIG_STR "\n", dev->name, ioaddr, DATA_PORT, tmp); retval = -ENODEV; @@ -736,8 +750,9 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) dev->irq = i; } else { i = lp->isa_config & INT_NO_MASK; +#ifndef CONFIG_CS89x0_PLATFORM if (lp->chip_type == CS8900) { -#ifdef CONFIG_CS89x0_NONISA_IRQ +#ifdef CS89x0_NONISA_IRQ i = cs8900_irq_map[0]; #else /* Translate the IRQ using the IRQ mapping table. */ @@ -758,6 +773,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } #endif } +#endif if (!dev->irq) dev->irq = i; } @@ -1168,6 +1184,7 @@ write_irq(struct net_device *dev, int chip_type, int irq) int i; if (chip_type == CS8900) { +#ifndef CONFIG_CS89x0_PLATFORM /* Search the mapping table for the corresponding IRQ pin. */ for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++) if (cs8900_irq_map[i] == irq) @@ -1175,6 +1192,10 @@ write_irq(struct net_device *dev, int chip_type, int irq) /* Not found */ if (i == ARRAY_SIZE(cs8900_irq_map)) i = 3; +#else + /* INTRQ0 pin is used for interrupt generation. */ + i = 0; +#endif writereg(dev, PP_CS8900_ISAINT, i); } else { writereg(dev, PP_CS8920_ISAINT, irq); @@ -1228,7 +1249,7 @@ net_open(struct net_device *dev) } else { -#ifndef CONFIG_CS89x0_NONISA_IRQ +#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); @@ -1746,7 +1767,7 @@ static int set_mac_address(struct net_device *dev, void *p) return 0; } -#ifdef MODULE +#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM) static struct net_device *dev_cs89x0; @@ -1900,7 +1921,97 @@ cleanup_module(void) release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT); free_netdev(dev_cs89x0); } -#endif /* MODULE */ +#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */ + +#ifdef CONFIG_CS89x0_PLATFORM +static int __init cs89x0_platform_probe(struct platform_device *pdev) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + struct net_local *lp; + struct resource *mem_res; + int err; + + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dev->irq = platform_get_irq(pdev, 0); + if (mem_res == NULL || dev->irq <= 0) { + dev_warn(&dev->dev, "memory/interrupt resource missing.\n"); + err = -ENXIO; + goto free; + } + + lp->phys_addr = mem_res->start; + lp->size = resource_size(mem_res); + if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) { + dev_warn(&dev->dev, "request_mem_region() failed.\n"); + err = -EBUSY; + goto free; + } + + lp->virt_addr = ioremap(lp->phys_addr, lp->size); + if (!lp->virt_addr) { + dev_warn(&dev->dev, "ioremap() failed.\n"); + err = -ENOMEM; + goto release; + } + + err = cs89x0_probe1(dev, (unsigned long)lp->virt_addr, 0); + if (err) { + dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n"); + goto unmap; + } + + platform_set_drvdata(pdev, dev); + return 0; + +unmap: + iounmap(lp->virt_addr); +release: + release_mem_region(lp->phys_addr, lp->size); +free: + free_netdev(dev); + return err; +} + +static int cs89x0_platform_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct net_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + iounmap(lp->virt_addr); + release_mem_region(lp->phys_addr, lp->size); + free_netdev(dev); + return 0; +} + +static struct platform_driver cs89x0_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .remove = cs89x0_platform_remove, +}; + +static int __init cs89x0_init(void) +{ + return platform_driver_probe(&cs89x0_driver, cs89x0_platform_probe); +} + +module_init(cs89x0_init); + +static void __exit cs89x0_cleanup(void) +{ + platform_driver_unregister(&cs89x0_driver); +} + +module_exit(cs89x0_cleanup); + +#endif /* CONFIG_CS89x0_PLATFORM */ /* * Local variables: -- cgit v1.2.3 From 69c311fd604a01db3ab26c3f16d6c9cb0b2d5de6 Mon Sep 17 00:00:00 2001 From: Jaccon Bastiaansen Date: Thu, 26 Jan 2012 21:47:11 +0100 Subject: CS89x0 : remove QQ2440 board support from the CS89x0 driver The QQ2440 board isn't supported anymore in the kernel, so support for this board can be removed from the CS89x0 driver. Signed-off-by: Jaccon Bastiaansen Acked-by: David S. Miller Signed-off-by: Sascha Hauer --- drivers/net/ethernet/cirrus/cs89x0.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers/net/ethernet/cirrus') diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 6b3cd24eb454..f7449bdd2cc3 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -182,11 +182,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; -#elif defined(CONFIG_MACH_QQ2440) -#define CS89x0_NONISA_IRQ -#include -static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 }; -static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 }; #elif defined(CONFIG_MACH_MX31ADS) #define CS89x0_NONISA_IRQ #include @@ -543,9 +538,6 @@ cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular) lp->force = g_cs89x0_media__force; #endif -#if defined(CONFIG_MACH_QQ2440) - lp->force |= FORCE_RJ45 | FORCE_FULL; -#endif } /* Grab the region so we can find another board if autoIRQ fails. */ -- cgit v1.2.3 From 64a38516ff50c3f6c1ef563c2f410db3239d9302 Mon Sep 17 00:00:00 2001 From: Jaccon Bastiaansen Date: Thu, 26 Jan 2012 21:47:27 +0100 Subject: CS89x0 : add CS89x0 platform device to the iMX31ADS board Add CS89x0 networking support to the iMX31ADS board by using the platform driver support in the CS89x0 driver. Signed-off-by: Jaccon Bastiaansen Acked-by: David S. Miller Signed-off-by: Sascha Hauer --- arch/arm/configs/imx_v6_v7_defconfig | 4 +-- arch/arm/mach-imx/mach-mx31ads.c | 35 +++++++++++++++++++++++--- arch/arm/plat-mxc/include/mach/board-mx31ads.h | 33 ------------------------ drivers/net/ethernet/cirrus/cs89x0.c | 7 ------ 4 files changed, 34 insertions(+), 45 deletions(-) delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h (limited to 'drivers/net/ethernet/cirrus') diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 3a4fb2e5fc68..c032fe8d3e0b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -26,7 +26,6 @@ CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_KZM_ARM11_01=y CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y @@ -82,8 +81,9 @@ CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CHELSIO is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_FARADAY is not set -CONFIG_FEC=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4917aab0e253..4518e5448227 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -39,6 +38,9 @@ #include "devices-imx31.h" +/* Base address of PBC controller */ +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT + /* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 @@ -62,6 +64,7 @@ #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) +#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) #define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) @@ -69,6 +72,10 @@ #define MXC_MAX_EXP_IO_LINES 16 +/* CS8900 */ +#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define CS4_CS8900_MMIO_START 0x20000 + /* * The serial port definition structure. */ @@ -101,11 +108,29 @@ static struct platform_device serial_device = { }, }; +static const struct resource mx31ads_cs8900_resources[] __initconst = { + DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), + DEFINE_RES_IRQ(EXPIO_INT_ENET_INT), +}; + +static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { + .name = "cs89x0", + .id = 0, + .res = mx31ads_cs8900_resources, + .num_res = ARRAY_SIZE(mx31ads_cs8900_resources), +}; + static int __init mxc_init_extuart(void) { return platform_device_register(&serial_device); } +static void __init mxc_init_ext_ethernet(void) +{ + platform_device_register_full( + (struct platform_device_info *)&mx31ads_cs8900_devinfo); +} + static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -492,12 +517,15 @@ static void __init mxc_init_audio(void) mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } -/* static mappings */ +/* + * Static mappings, starting from the CS4 start address up to the start address + * of the CS8900. + */ static struct map_desc mx31ads_io_desc[] __initdata = { { .virtual = MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE / 2, + .length = CS4_CS8900_MMIO_START, .type = MT_DEVICE }, }; @@ -522,6 +550,7 @@ static void __init mx31ads_init(void) mxc_init_imx_uart(); mxc_init_i2c(); mxc_init_audio(); + mxc_init_ext_ethernet(); } static void __init mx31ads_timer_init(void) diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h deleted file mode 100644 index 94b60dd47137..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -#include - -/* - * These symbols are used by drivers/net/cs89x0.c. - * This is ugly as hell, but we have to provide them until - * someone fixed the driver. - */ - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT -/* Offsets for the PBC Controller register */ - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) - -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index f7449bdd2cc3..7202ca951bf3 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -182,13 +182,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; -#elif defined(CONFIG_MACH_MX31ADS) -#define CS89x0_NONISA_IRQ -#include -static unsigned int netcard_portlist[] __used __initdata = { - PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0 -}; -static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0}; #else #ifndef CONFIG_CS89x0_PLATFORM static unsigned int netcard_portlist[] __used __initdata = -- cgit v1.2.3