From f7ba7dbf4f7af67b5936ff1cbd40a3254b409ebf Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 4 Aug 2020 14:17:16 +0200 Subject: net: macb: Properly handle phylink on at91sam9x I just recently noticed that ethernet does not work anymore since v5.5 on the GARDENA smart Gateway, which is based on the AT91SAM9G25. Debugging showed that the "GEM bits" in the NCFGR register are now unconditionally accessed, which is incorrect for the !macb_is_gem() case. This patch adds the macb_is_gem() checks back to the code (in macb_mac_config() & macb_mac_link_up()), so that the GEM register bits are not accessed in this case any more. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Stefan Roese Cc: Reto Schneider Cc: Alexandre Belloni Cc: Nicolas Ferre Cc: David S. Miller Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet/cadence') diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 636f760d518f..6761f404b8aa 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -578,7 +578,7 @@ static void macb_mac_config(struct phylink_config *config, unsigned int mode, if (bp->caps & MACB_CAPS_MACB_IS_EMAC) { if (state->interface == PHY_INTERFACE_MODE_RMII) ctrl |= MACB_BIT(RM9200_RMII); - } else { + } else if (macb_is_gem(bp)) { ctrl &= ~(GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL)); if (state->interface == PHY_INTERFACE_MODE_SGMII) @@ -639,10 +639,13 @@ static void macb_mac_link_up(struct phylink_config *config, ctrl |= MACB_BIT(FD); if (!(bp->caps & MACB_CAPS_MACB_IS_EMAC)) { - ctrl &= ~(GEM_BIT(GBE) | MACB_BIT(PAE)); + ctrl &= ~MACB_BIT(PAE); + if (macb_is_gem(bp)) { + ctrl &= ~GEM_BIT(GBE); - if (speed == SPEED_1000) - ctrl |= GEM_BIT(GBE); + if (speed == SPEED_1000) + ctrl |= GEM_BIT(GBE); + } /* We do not support MLO_PAUSE_RX yet */ if (tx_pause) -- cgit v1.2.3