From 67bef942801842ce7486a23dd3940e320f217319 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 17 Oct 2016 15:54:03 -0400 Subject: ethernet/atheros: use core min/max MTU checking atl2: min_mtu 40, max_mtu 1504 - Remove a few redundant defines that already have equivalents in if_ether.h. atl1: min_mtu 42, max_mtu 10218 atl1e: min_mtu 42, max_mtu 8170 atl1c: min_mtu 42, max_mtu 6122/1500 - GbE hardware gets a max_mtu of 6122, slower hardware gets 1500. alx: min_mtu 34, max_mtu 9256 - Not so sure that minimum MTU number is really what was intended, but that's what the math actually makes it out to be, due to max_frame manipulations and comparison in alx_change_mtu, rather than just comparing new_mtu. (I think 68 was the intended min_mtu value). CC: netdev@vger.kernel.org CC: Jay Cliburn CC: Chris Snook Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/hw.h | 1 - drivers/net/ethernet/atheros/alx/main.c | 10 ++---- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 41 ++++++++++++++++--------- drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 12 +++----- drivers/net/ethernet/atheros/atlx/atl1.c | 15 ++++----- drivers/net/ethernet/atheros/atlx/atl2.c | 16 +++++----- drivers/net/ethernet/atheros/atlx/atl2.h | 3 -- 7 files changed, 47 insertions(+), 51 deletions(-) (limited to 'drivers/net/ethernet/atheros') diff --git a/drivers/net/ethernet/atheros/alx/hw.h b/drivers/net/ethernet/atheros/alx/hw.h index 0191477ace51..e42d7e0947eb 100644 --- a/drivers/net/ethernet/atheros/alx/hw.h +++ b/drivers/net/ethernet/atheros/alx/hw.h @@ -351,7 +351,6 @@ struct alx_rrd { #define ALX_MAX_JUMBO_PKT_SIZE (9*1024) #define ALX_MAX_TSO_PKT_SIZE (7*1024) #define ALX_MAX_FRAME_SIZE ALX_MAX_JUMBO_PKT_SIZE -#define ALX_MIN_FRAME_SIZE (ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) #define ALX_MAX_RX_QUEUES 8 #define ALX_MAX_TX_QUEUES 4 diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index c0f84b73574d..eccbacd96201 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -892,6 +892,9 @@ static int alx_init_sw(struct alx_priv *alx) hw->smb_timer = 400; hw->mtu = alx->dev->mtu; alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu); + /* MTU range: 34 - 9256 */ + alx->dev->min_mtu = 34; + alx->dev->max_mtu = ALX_MAX_FRAME_LEN(ALX_MAX_FRAME_SIZE); alx->tx_ringsz = 256; alx->rx_ringsz = 512; hw->imt = 200; @@ -994,13 +997,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) struct alx_priv *alx = netdev_priv(netdev); int max_frame = ALX_MAX_FRAME_LEN(mtu); - if ((max_frame < ALX_MIN_FRAME_SIZE) || - (max_frame > ALX_MAX_FRAME_SIZE)) - return -EINVAL; - - if (netdev->mtu == mtu) - return 0; - netdev->mtu = mtu; alx->hw.mtu = mtu; alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE); diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index a3200ea6d765..773d3b7d8dd5 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -519,6 +519,26 @@ static int atl1c_set_features(struct net_device *netdev, return 0; } +static void atl1c_set_max_mtu(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + + switch (hw->nic_type) { + /* These (GbE) devices support jumbo packets, max_mtu 6122 */ + case athr_l1c: + case athr_l1d: + case athr_l1d_2: + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + break; + /* The 10/100 devices don't support jumbo packets, max_mtu 1500 */ + default: + netdev->max_mtu = ETH_DATA_LEN; + break; + } +} + /** * atl1c_change_mtu - Change the Maximum Transfer Unit * @netdev: network interface device structure @@ -529,22 +549,9 @@ static int atl1c_set_features(struct net_device *netdev, static int atl1c_change_mtu(struct net_device *netdev, int new_mtu) { struct atl1c_adapter *adapter = netdev_priv(netdev); - struct atl1c_hw *hw = &adapter->hw; - int old_mtu = netdev->mtu; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - /* Fast Ethernet controller doesn't support jumbo packet */ - if (((hw->nic_type == athr_l2c || - hw->nic_type == athr_l2c_b || - hw->nic_type == athr_l2c_b2) && new_mtu > ETH_DATA_LEN) || - max_frame < ETH_ZLEN + ETH_FCS_LEN || - max_frame > MAX_JUMBO_FRAME_SIZE) { - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } + /* set MTU */ - if (old_mtu != new_mtu && netif_running(netdev)) { + if (netif_running(netdev)) { while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) msleep(1); netdev->mtu = new_mtu; @@ -2511,6 +2518,7 @@ static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev) netdev->netdev_ops = &atl1c_netdev_ops; netdev->watchdog_timeo = AT_TX_WATCHDOG; + netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); atl1c_set_ethtool_ops(netdev); /* TODO: add when ready */ @@ -2613,6 +2621,9 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "net device private data init failed\n"); goto err_sw_init; } + /* set max MTU */ + atl1c_set_max_mtu(netdev); + atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE); /* Init GPHY as early as possible due to power saving issue */ diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index 974713b19ab6..e96091b652a7 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -439,16 +439,10 @@ static int atl1e_set_features(struct net_device *netdev, static int atl1e_change_mtu(struct net_device *netdev, int new_mtu) { struct atl1e_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - netdev_warn(adapter->netdev, "invalid MTU setting\n"); - return -EINVAL; - } /* set MTU */ - if (old_mtu != new_mtu && netif_running(netdev)) { + if (netif_running(netdev)) { while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) msleep(1); netdev->mtu = new_mtu; @@ -2272,6 +2266,10 @@ static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev) netdev->netdev_ops = &atl1e_netdev_ops; netdev->watchdog_timeo = AT_TX_WATCHDOG; + /* MTU range: 42 - 8170 */ + netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); atl1e_set_ethtool_ops(netdev); netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO | diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 529bca718334..9aede18aa70f 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -2701,23 +2701,15 @@ static void atl1_reset_dev_task(struct work_struct *work) static int atl1_change_mtu(struct net_device *netdev, int new_mtu) { struct atl1_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } - adapter->hw.max_frame_size = max_frame; adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; adapter->rx_buffer_len = (max_frame + 7) & ~7; adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; netdev->mtu = new_mtu; - if ((old_mtu != new_mtu) && netif_running(netdev)) { + if (netif_running(netdev)) { atl1_down(adapter); atl1_up(adapter); } @@ -3031,6 +3023,11 @@ static int atl1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* is this valid? see atl1_setup_mac_ctrl() */ netdev->features |= NETIF_F_RXCSUM; + /* MTU range: 42 - 10218 */ + netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + /* * patch for some L1 of old version, * the final version of L1 may not need these diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index 2ff465848b65..6911394115b2 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -253,7 +253,7 @@ static int atl2_configure(struct atl2_adapter *adapter) /* set MTU */ ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu + - ENET_HEADER_SIZE + VLAN_SIZE + ETHERNET_FCS_SIZE); + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN); /* 1590 */ ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177); @@ -925,15 +925,11 @@ static int atl2_change_mtu(struct net_device *netdev, int new_mtu) struct atl2_adapter *adapter = netdev_priv(netdev); struct atl2_hw *hw = &adapter->hw; - if ((new_mtu < 40) || (new_mtu > (ETH_DATA_LEN + VLAN_SIZE))) - return -EINVAL; - /* set MTU */ - if (hw->max_frame_size != new_mtu) { - netdev->mtu = new_mtu; - ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ENET_HEADER_SIZE + - VLAN_SIZE + ETHERNET_FCS_SIZE); - } + netdev->mtu = new_mtu; + hw->max_frame_size = new_mtu; + ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ETH_HLEN + + VLAN_HLEN + ETH_FCS_LEN); return 0; } @@ -1398,6 +1394,8 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->netdev_ops = &atl2_netdev_ops; netdev->ethtool_ops = &atl2_ethtool_ops; netdev->watchdog_timeo = 5 * HZ; + netdev->min_mtu = 40; + netdev->max_mtu = ETH_DATA_LEN + VLAN_HLEN; strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); netdev->mem_start = mmio_start; diff --git a/drivers/net/ethernet/atheros/atlx/atl2.h b/drivers/net/ethernet/atheros/atlx/atl2.h index 2f27d4c4c3ad..c64a6bdfa7ae 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.h +++ b/drivers/net/ethernet/atheros/atlx/atl2.h @@ -228,12 +228,9 @@ static void atl2_force_ps(struct atl2_hw *hw); #define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x000F /* Everything */ /* The size (in bytes) of a ethernet packet */ -#define ENET_HEADER_SIZE 14 #define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */ #define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */ -#define ETHERNET_FCS_SIZE 4 #define MAX_JUMBO_FRAME_SIZE 0x2000 -#define VLAN_SIZE 4 struct tx_pkt_header { unsigned pkt_size:11; -- cgit v1.2.3