From dee1ad47f2ee75f5146d83ca757c1b7861c34c3b Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Thu, 7 Apr 2011 07:42:33 -0700 Subject: intel: Move the Intel wired LAN drivers Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/ich8lan.c | 4111 ------------------------------------------ 1 file changed, 4111 deletions(-) delete mode 100644 drivers/net/e1000e/ich8lan.c (limited to 'drivers/net/e1000e/ich8lan.c') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c deleted file mode 100644 index 4e36978b8fd8..000000000000 --- a/drivers/net/e1000e/ich8lan.c +++ /dev/null @@ -1,4111 +0,0 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2011 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/* - * 82562G 10/100 Network Connection - * 82562G-2 10/100 Network Connection - * 82562GT 10/100 Network Connection - * 82562GT-2 10/100 Network Connection - * 82562V 10/100 Network Connection - * 82562V-2 10/100 Network Connection - * 82566DC-2 Gigabit Network Connection - * 82566DC Gigabit Network Connection - * 82566DM-2 Gigabit Network Connection - * 82566DM Gigabit Network Connection - * 82566MC Gigabit Network Connection - * 82566MM Gigabit Network Connection - * 82567LM Gigabit Network Connection - * 82567LF Gigabit Network Connection - * 82567V Gigabit Network Connection - * 82567LM-2 Gigabit Network Connection - * 82567LF-2 Gigabit Network Connection - * 82567V-2 Gigabit Network Connection - * 82567LF-3 Gigabit Network Connection - * 82567LM-3 Gigabit Network Connection - * 82567LM-4 Gigabit Network Connection - * 82577LM Gigabit Network Connection - * 82577LC Gigabit Network Connection - * 82578DM Gigabit Network Connection - * 82578DC Gigabit Network Connection - * 82579LM Gigabit Network Connection - * 82579V Gigabit Network Connection - */ - -#include "e1000.h" - -#define ICH_FLASH_GFPREG 0x0000 -#define ICH_FLASH_HSFSTS 0x0004 -#define ICH_FLASH_HSFCTL 0x0006 -#define ICH_FLASH_FADDR 0x0008 -#define ICH_FLASH_FDATA0 0x0010 -#define ICH_FLASH_PR0 0x0074 - -#define ICH_FLASH_READ_COMMAND_TIMEOUT 500 -#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 -#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000 -#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 - -#define ICH_CYCLE_READ 0 -#define ICH_CYCLE_WRITE 2 -#define ICH_CYCLE_ERASE 3 - -#define FLASH_GFPREG_BASE_MASK 0x1FFF -#define FLASH_SECTOR_ADDR_SHIFT 12 - -#define ICH_FLASH_SEG_SIZE_256 256 -#define ICH_FLASH_SEG_SIZE_4K 4096 -#define ICH_FLASH_SEG_SIZE_8K 8192 -#define ICH_FLASH_SEG_SIZE_64K 65536 - - -#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ -/* FW established a valid mode */ -#define E1000_ICH_FWSM_FW_VALID 0x00008000 - -#define E1000_ICH_MNG_IAMT_MODE 0x2 - -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_OFF2 << 8) | \ - (ID_LED_DEF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_ICH_NVM_SIG_WORD 0x13 -#define E1000_ICH_NVM_SIG_MASK 0xC000 -#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 -#define E1000_ICH_NVM_SIG_VALUE 0x80 - -#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 - -#define E1000_FEXTNVM_SW_CONFIG 1 -#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */ - -#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 - -#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL - -#define E1000_ICH_RAR_ENTRIES 7 - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) -#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ -#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ - -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 -#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 -#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 - -#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ - -#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ - -/* SMBus Address Phy Register */ -#define HV_SMB_ADDR PHY_REG(768, 26) -#define HV_SMB_ADDR_MASK 0x007F -#define HV_SMB_ADDR_PEC_EN 0x0200 -#define HV_SMB_ADDR_VALID 0x0080 - -/* PHY Power Management Control */ -#define HV_PM_CTRL PHY_REG(770, 17) - -/* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 - -/* EMI Registers */ -#define I82579_EMI_ADDR 0x10 -#define I82579_EMI_DATA 0x11 -#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ - -/* Strapping Option Register - RO */ -#define E1000_STRAP 0x0000C -#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 -#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 - -/* OEM Bits Phy Register */ -#define HV_OEM_BITS PHY_REG(768, 25) -#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ -#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ -#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ - -#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ -#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ - -/* KMRN Mode Control */ -#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) -#define HV_KMRN_MDIO_SLOW 0x0400 - -/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ -/* Offset 04h HSFSTS */ -union ich8_hws_flash_status { - struct ich8_hsfsts { - u16 flcdone :1; /* bit 0 Flash Cycle Done */ - u16 flcerr :1; /* bit 1 Flash Cycle Error */ - u16 dael :1; /* bit 2 Direct Access error Log */ - u16 berasesz :2; /* bit 4:3 Sector Erase Size */ - u16 flcinprog :1; /* bit 5 flash cycle in Progress */ - u16 reserved1 :2; /* bit 13:6 Reserved */ - u16 reserved2 :6; /* bit 13:6 Reserved */ - u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */ - u16 flockdn :1; /* bit 15 Flash Config Lock-Down */ - } hsf_status; - u16 regval; -}; - -/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */ -/* Offset 06h FLCTL */ -union ich8_hws_flash_ctrl { - struct ich8_hsflctl { - u16 flcgo :1; /* 0 Flash Cycle Go */ - u16 flcycle :2; /* 2:1 Flash Cycle */ - u16 reserved :5; /* 7:3 Reserved */ - u16 fldbcount :2; /* 9:8 Flash Data Byte Count */ - u16 flockdn :6; /* 15:10 Reserved */ - } hsf_ctrl; - u16 regval; -}; - -/* ICH Flash Region Access Permissions */ -union ich8_hws_flash_regacc { - struct ich8_flracc { - u32 grra :8; /* 0:7 GbE region Read Access */ - u32 grwa :8; /* 8:15 GbE region Write Access */ - u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */ - u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */ - } hsf_flregacc; - u16 regval; -}; - -/* ICH Flash Protected Region */ -union ich8_flash_protected_range { - struct ich8_pr { - u32 base:13; /* 0:12 Protected Range Base */ - u32 reserved1:2; /* 13:14 Reserved */ - u32 rpe:1; /* 15 Read Protection Enable */ - u32 limit:13; /* 16:28 Protected Range Limit */ - u32 reserved2:2; /* 29:30 Reserved */ - u32 wpe:1; /* 31 Write Protection Enable */ - } range; - u32 regval; -}; - -static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); -static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); -static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); -static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); -static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, - u32 offset, u8 byte); -static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, - u8 *data); -static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, - u16 *data); -static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, - u8 size, u16 *data); -static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); -static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); -static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); -static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); -static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); -static s32 e1000_led_off_ich8lan(struct e1000_hw *hw); -static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw); -static s32 e1000_setup_led_pchlan(struct e1000_hw *hw); -static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); -static s32 e1000_led_on_pchlan(struct e1000_hw *hw); -static s32 e1000_led_off_pchlan(struct e1000_hw *hw); -static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); -static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); -static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); -static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); -static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); -static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); -static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); -static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); -static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); - -static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) -{ - return readw(hw->flash_address + reg); -} - -static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg) -{ - return readl(hw->flash_address + reg); -} - -static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val) -{ - writew(val, hw->flash_address + reg); -} - -static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) -{ - writel(val, hw->flash_address + reg); -} - -#define er16flash(reg) __er16flash(hw, (reg)) -#define er32flash(reg) __er32flash(hw, (reg)) -#define ew16flash(reg,val) __ew16flash(hw, (reg), (val)) -#define ew32flash(reg,val) __ew32flash(hw, (reg), (val)) - -static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw) -{ - u32 ctrl; - - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; - ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; - ew32(CTRL, ctrl); - e1e_flush(); - udelay(10); - ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; - ew32(CTRL, ctrl); -} - -/** - * e1000_init_phy_params_pchlan - Initialize PHY function pointers - * @hw: pointer to the HW structure - * - * Initialize family-specific PHY parameters and function pointers. - **/ -static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 fwsm; - s32 ret_val = 0; - - phy->addr = 1; - phy->reset_delay_us = 100; - - phy->ops.set_page = e1000_set_page_igp; - phy->ops.read_reg = e1000_read_phy_reg_hv; - phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; - phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; - phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.write_reg = e1000_write_phy_reg_hv; - phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; - phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - - /* - * The MAC-PHY interconnect may still be in SMBus mode - * after Sx->S0. If the manageability engine (ME) is - * disabled, then toggle the LANPHYPC Value bit to force - * the interconnect to PCIe mode. - */ - fwsm = er32(FWSM); - if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) { - e1000_toggle_lanphypc_value_ich8lan(hw); - msleep(50); - - /* - * Gate automatic PHY configuration by hardware on - * non-managed 82579 - */ - if (hw->mac.type == e1000_pch2lan) - e1000_gate_hw_phy_config_ich8lan(hw, true); - } - - /* - * Reset the PHY before any access to it. Doing so, ensures that - * the PHY is in a known good state before we read/write PHY registers. - * The generic reset is sufficient here, because we haven't determined - * the PHY type yet. - */ - ret_val = e1000e_phy_hw_reset_generic(hw); - if (ret_val) - goto out; - - /* Ungate automatic PHY configuration on non-managed 82579 */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) { - usleep_range(10000, 20000); - e1000_gate_hw_phy_config_ich8lan(hw, false); - } - - phy->id = e1000_phy_unknown; - switch (hw->mac.type) { - default: - ret_val = e1000e_get_phy_id(hw); - if (ret_val) - goto out; - if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK)) - break; - /* fall-through */ - case e1000_pch2lan: - /* - * In case the PHY needs to be in mdio slow mode, - * set slow mode and try to get the PHY id again. - */ - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (ret_val) - goto out; - ret_val = e1000e_get_phy_id(hw); - if (ret_val) - goto out; - break; - } - phy->type = e1000e_get_phy_type_from_id(phy->id); - - switch (phy->type) { - case e1000_phy_82577: - case e1000_phy_82579: - phy->ops.check_polarity = e1000_check_polarity_82577; - phy->ops.force_speed_duplex = - e1000_phy_force_speed_duplex_82577; - phy->ops.get_cable_length = e1000_get_cable_length_82577; - phy->ops.get_info = e1000_get_phy_info_82577; - phy->ops.commit = e1000e_phy_sw_reset; - break; - case e1000_phy_82578: - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88; - phy->ops.get_cable_length = e1000e_get_cable_length_m88; - phy->ops.get_info = e1000e_get_phy_info_m88; - break; - default: - ret_val = -E1000_ERR_PHY; - break; - } - -out: - return ret_val; -} - -/** - * e1000_init_phy_params_ich8lan - Initialize PHY function pointers - * @hw: pointer to the HW structure - * - * Initialize family-specific PHY parameters and function pointers. - **/ -static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 i = 0; - - phy->addr = 1; - phy->reset_delay_us = 100; - - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; - - /* - * We may need to do this twice - once for IGP and if that fails, - * we'll set BM func pointers and try again - */ - ret_val = e1000e_determine_phy_address(hw); - if (ret_val) { - phy->ops.write_reg = e1000e_write_phy_reg_bm; - phy->ops.read_reg = e1000e_read_phy_reg_bm; - ret_val = e1000e_determine_phy_address(hw); - if (ret_val) { - e_dbg("Cannot determine PHY addr. Erroring out\n"); - return ret_val; - } - } - - phy->id = 0; - while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) && - (i++ < 100)) { - usleep_range(1000, 2000); - ret_val = e1000e_get_phy_id(hw); - if (ret_val) - return ret_val; - } - - /* Verify phy id */ - switch (phy->id) { - case IGP03E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked; - phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked; - phy->ops.get_info = e1000e_get_phy_info_igp; - phy->ops.check_polarity = e1000_check_polarity_igp; - phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp; - break; - case IFE_E_PHY_ID: - case IFE_PLUS_E_PHY_ID: - case IFE_C_E_PHY_ID: - phy->type = e1000_phy_ife; - phy->autoneg_mask = E1000_ALL_NOT_GIG; - phy->ops.get_info = e1000_get_phy_info_ife; - phy->ops.check_polarity = e1000_check_polarity_ife; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife; - break; - case BME1000_E_PHY_ID: - phy->type = e1000_phy_bm; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->ops.read_reg = e1000e_read_phy_reg_bm; - phy->ops.write_reg = e1000e_write_phy_reg_bm; - phy->ops.commit = e1000e_phy_sw_reset; - phy->ops.get_info = e1000e_get_phy_info_m88; - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88; - break; - default: - return -E1000_ERR_PHY; - break; - } - - return 0; -} - -/** - * e1000_init_nvm_params_ich8lan - Initialize NVM function pointers - * @hw: pointer to the HW structure - * - * Initialize family-specific NVM parameters and function - * pointers. - **/ -static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - u32 gfpreg, sector_base_addr, sector_end_addr; - u16 i; - - /* Can't read flash registers if the register set isn't mapped. */ - if (!hw->flash_address) { - e_dbg("ERROR: Flash registers not mapped\n"); - return -E1000_ERR_CONFIG; - } - - nvm->type = e1000_nvm_flash_sw; - - gfpreg = er32flash(ICH_FLASH_GFPREG); - - /* - * sector_X_addr is a "sector"-aligned address (4096 bytes) - * Add 1 to sector_end_addr since this sector is included in - * the overall size. - */ - sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; - sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; - - /* flash_base_addr is byte-aligned */ - nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; - - /* - * find total size of the NVM, then cut in half since the total - * size represents two separate NVM banks. - */ - nvm->flash_bank_size = (sector_end_addr - sector_base_addr) - << FLASH_SECTOR_ADDR_SHIFT; - nvm->flash_bank_size /= 2; - /* Adjust to word count */ - nvm->flash_bank_size /= sizeof(u16); - - nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS; - - /* Clear shadow ram */ - for (i = 0; i < nvm->word_size; i++) { - dev_spec->shadow_ram[i].modified = false; - dev_spec->shadow_ram[i].value = 0xFFFF; - } - - return 0; -} - -/** - * e1000_init_mac_params_ich8lan - Initialize MAC function pointers - * @hw: pointer to the HW structure - * - * Initialize family-specific MAC parameters and function - * pointers. - **/ -static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct e1000_mac_info *mac = &hw->mac; - - /* Set media type function pointer */ - hw->phy.media_type = e1000_media_type_copper; - - /* Set mta register count */ - mac->mta_reg_count = 32; - /* Set rar entry count */ - mac->rar_entry_count = E1000_ICH_RAR_ENTRIES; - if (mac->type == e1000_ich8lan) - mac->rar_entry_count--; - /* FWSM register */ - mac->has_fwsm = true; - /* ARC subsystem not supported */ - mac->arc_subsystem_valid = false; - /* Adaptive IFS supported */ - mac->adaptive_ifs = true; - - /* LED operations */ - switch (mac->type) { - case e1000_ich8lan: - case e1000_ich9lan: - case e1000_ich10lan: - /* check management mode */ - mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan; - /* ID LED init */ - mac->ops.id_led_init = e1000e_id_led_init; - /* blink LED */ - mac->ops.blink_led = e1000e_blink_led_generic; - /* setup LED */ - mac->ops.setup_led = e1000e_setup_led_generic; - /* cleanup LED */ - mac->ops.cleanup_led = e1000_cleanup_led_ich8lan; - /* turn on/off LED */ - mac->ops.led_on = e1000_led_on_ich8lan; - mac->ops.led_off = e1000_led_off_ich8lan; - break; - case e1000_pchlan: - case e1000_pch2lan: - /* check management mode */ - mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan; - /* ID LED init */ - mac->ops.id_led_init = e1000_id_led_init_pchlan; - /* setup LED */ - mac->ops.setup_led = e1000_setup_led_pchlan; - /* cleanup LED */ - mac->ops.cleanup_led = e1000_cleanup_led_pchlan; - /* turn on/off LED */ - mac->ops.led_on = e1000_led_on_pchlan; - mac->ops.led_off = e1000_led_off_pchlan; - break; - default: - break; - } - - /* Enable PCS Lock-loss workaround for ICH8 */ - if (mac->type == e1000_ich8lan) - e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - - /* Gate automatic PHY configuration by hardware on managed 82579 */ - if ((mac->type == e1000_pch2lan) && - (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - - return 0; -} - -/** - * e1000_set_eee_pchlan - Enable/disable EEE support - * @hw: pointer to the HW structure - * - * Enable/disable EEE based on setting in dev_spec structure. The bits in - * the LPI Control register will remain set only if/when link is up. - **/ -static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) -{ - s32 ret_val = 0; - u16 phy_reg; - - if (hw->phy.type != e1000_phy_82579) - goto out; - - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); - if (ret_val) - goto out; - - if (hw->dev_spec.ich8lan.eee_disable) - phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK; - else - phy_reg |= I82579_LPI_CTRL_ENABLE_MASK; - - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); -out: - return ret_val; -} - -/** - * e1000_check_for_copper_link_ich8lan - Check for link (Copper) - * @hw: pointer to the HW structure - * - * Checks to see of the link status of the hardware has changed. If a - * change in link status has been detected, then we read the PHY registers - * to get the current speed/duplex if link exists. - **/ -static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - bool link; - - /* - * We only want to go out to the PHY registers to see if Auto-Neg - * has completed and/or if our link status has changed. The - * get_link_status flag is set upon receiving a Link Status - * Change or Rx Sequence Error interrupt. - */ - if (!mac->get_link_status) { - ret_val = 0; - goto out; - } - - /* - * First we want to see if the MII Status Register reports - * link. If so, then we want to get the current speed/duplex - * of the PHY. - */ - ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - goto out; - - if (hw->mac.type == e1000_pchlan) { - ret_val = e1000_k1_gig_workaround_hv(hw, link); - if (ret_val) - goto out; - } - - if (!link) - goto out; /* No link detected */ - - mac->get_link_status = false; - - if (hw->phy.type == e1000_phy_82578) { - ret_val = e1000_link_stall_workaround_hv(hw); - if (ret_val) - goto out; - } - - if (hw->mac.type == e1000_pch2lan) { - ret_val = e1000_k1_workaround_lv(hw); - if (ret_val) - goto out; - } - - /* - * Check if there was DownShift, must be checked - * immediately after link-up - */ - e1000e_check_downshift(hw); - - /* Enable/Disable EEE after link up */ - ret_val = e1000_set_eee_pchlan(hw); - if (ret_val) - goto out; - - /* - * If we are forcing speed/duplex, then we simply return since - * we have already determined whether we have link or not. - */ - if (!mac->autoneg) { - ret_val = -E1000_ERR_CONFIG; - goto out; - } - - /* - * Auto-Neg is enabled. Auto Speed Detection takes care - * of MAC speed/duplex configuration. So we only need to - * configure Collision Distance in the MAC. - */ - e1000e_config_collision_dist(hw); - - /* - * Configure Flow Control now that Auto-Neg has completed. - * First, we need to restore the desired flow control - * settings because we may have had to re-autoneg with a - * different link partner. - */ - ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) - e_dbg("Error configuring flow control\n"); - -out: - return ret_val; -} - -static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - s32 rc; - - rc = e1000_init_mac_params_ich8lan(adapter); - if (rc) - return rc; - - rc = e1000_init_nvm_params_ich8lan(hw); - if (rc) - return rc; - - switch (hw->mac.type) { - case e1000_ich8lan: - case e1000_ich9lan: - case e1000_ich10lan: - rc = e1000_init_phy_params_ich8lan(hw); - break; - case e1000_pchlan: - case e1000_pch2lan: - rc = e1000_init_phy_params_pchlan(hw); - break; - default: - break; - } - if (rc) - return rc; - - /* - * Disable Jumbo Frame support on parts with Intel 10/100 PHY or - * on parts with MACsec enabled in NVM (reflected in CTRL_EXT). - */ - if ((adapter->hw.phy.type == e1000_phy_ife) || - ((adapter->hw.mac.type >= e1000_pch2lan) && - (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) { - adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES; - adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN; - - hw->mac.ops.blink_led = NULL; - } - - if ((adapter->hw.mac.type == e1000_ich8lan) && - (adapter->hw.phy.type == e1000_phy_igp_3)) - adapter->flags |= FLAG_LSC_GIG_SPEED_DROP; - - /* Disable EEE by default until IEEE802.3az spec is finalized */ - if (adapter->flags2 & FLAG2_HAS_EEE) - adapter->hw.dev_spec.ich8lan.eee_disable = true; - - return 0; -} - -static DEFINE_MUTEX(nvm_mutex); - -/** - * e1000_acquire_nvm_ich8lan - Acquire NVM mutex - * @hw: pointer to the HW structure - * - * Acquires the mutex for performing NVM operations. - **/ -static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) -{ - mutex_lock(&nvm_mutex); - - return 0; -} - -/** - * e1000_release_nvm_ich8lan - Release NVM mutex - * @hw: pointer to the HW structure - * - * Releases the mutex used while performing NVM operations. - **/ -static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) -{ - mutex_unlock(&nvm_mutex); -} - -static DEFINE_MUTEX(swflag_mutex); - -/** - * e1000_acquire_swflag_ich8lan - Acquire software control flag - * @hw: pointer to the HW structure - * - * Acquires the software control flag for performing PHY and select - * MAC CSR accesses. - **/ -static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) -{ - u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT; - s32 ret_val = 0; - - mutex_lock(&swflag_mutex); - - while (timeout) { - extcnf_ctrl = er32(EXTCNF_CTRL); - if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) - break; - - mdelay(1); - timeout--; - } - - if (!timeout) { - e_dbg("SW/FW/HW has locked the resource for too long.\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; - } - - timeout = SW_FLAG_TIMEOUT; - - extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - - while (timeout) { - extcnf_ctrl = er32(EXTCNF_CTRL); - if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) - break; - - mdelay(1); - timeout--; - } - - if (!timeout) { - e_dbg("Failed to acquire the semaphore.\n"); - extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - ret_val = -E1000_ERR_CONFIG; - goto out; - } - -out: - if (ret_val) - mutex_unlock(&swflag_mutex); - - return ret_val; -} - -/** - * e1000_release_swflag_ich8lan - Release software control flag - * @hw: pointer to the HW structure - * - * Releases the software control flag for performing PHY and select - * MAC CSR accesses. - **/ -static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) -{ - u32 extcnf_ctrl; - - extcnf_ctrl = er32(EXTCNF_CTRL); - - if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) { - extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - } else { - e_dbg("Semaphore unexpectedly released by sw/fw/hw\n"); - } - - mutex_unlock(&swflag_mutex); -} - -/** - * e1000_check_mng_mode_ich8lan - Checks management mode - * @hw: pointer to the HW structure - * - * This checks if the adapter has any manageability enabled. - * This is a function pointer entry point only called by read/write - * routines for the PHY and NVM parts. - **/ -static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) -{ - u32 fwsm; - - fwsm = er32(FWSM); - return (fwsm & E1000_ICH_FWSM_FW_VALID) && - ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); -} - -/** - * e1000_check_mng_mode_pchlan - Checks management mode - * @hw: pointer to the HW structure - * - * This checks if the adapter has iAMT enabled. - * This is a function pointer entry point only called by read/write - * routines for the PHY and NVM parts. - **/ -static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw) -{ - u32 fwsm; - - fwsm = er32(FWSM); - return (fwsm & E1000_ICH_FWSM_FW_VALID) && - (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); -} - -/** - * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked - * @hw: pointer to the HW structure - * - * Checks if firmware is blocking the reset of the PHY. - * This is a function pointer entry point only called by - * reset routines. - **/ -static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) -{ - u32 fwsm; - - fwsm = er32(FWSM); - - return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET; -} - -/** - * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states - * @hw: pointer to the HW structure - * - * Assumes semaphore already acquired. - * - **/ -static s32 e1000_write_smbus_addr(struct e1000_hw *hw) -{ - u16 phy_data; - u32 strap = er32(STRAP); - s32 ret_val = 0; - - strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; - - ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data); - if (ret_val) - goto out; - - phy_data &= ~HV_SMB_ADDR_MASK; - phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT); - phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; - ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data); - -out: - return ret_val; -} - -/** - * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration - * @hw: pointer to the HW structure - * - * SW should configure the LCD from the NVM extended configuration region - * as a workaround for certain parts. - **/ -static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; - s32 ret_val = 0; - u16 word_addr, reg_data, reg_addr, phy_page = 0; - - /* - * Initialize the PHY from the NVM on ICH platforms. This - * is needed due to an issue where the NVM configuration is - * not properly autoloaded after power transitions. - * Therefore, after each PHY reset, we will load the - * configuration data out of the NVM manually. - */ - switch (hw->mac.type) { - case e1000_ich8lan: - if (phy->type != e1000_phy_igp_3) - return ret_val; - - if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) || - (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) { - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; - break; - } - /* Fall-thru */ - case e1000_pchlan: - case e1000_pch2lan: - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; - break; - default: - return ret_val; - } - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - data = er32(FEXTNVM); - if (!(data & sw_cfg_mask)) - goto out; - - /* - * Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration - */ - data = er32(EXTCNF_CTRL); - if (!(hw->mac.type == e1000_pch2lan)) { - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) - goto out; - } - - cnf_size = er32(EXTCNF_SIZE); - cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; - cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; - if (!cnf_size) - goto out; - - cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; - cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - - if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && - (hw->mac.type == e1000_pchlan)) || - (hw->mac.type == e1000_pch2lan)) { - /* - * HW configures the SMBus address and LEDs when the - * OEM and LCD Write Enable bits are set in the NVM. - * When both NVM bits are cleared, SW will configure - * them instead. - */ - ret_val = e1000_write_smbus_addr(hw); - if (ret_val) - goto out; - - data = er32(LEDCTL); - ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG, - (u16)data); - if (ret_val) - goto out; - } - - /* Configure LCD from extended configuration region. */ - - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); - - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, - ®_data); - if (ret_val) - goto out; - - ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), - 1, ®_addr); - if (ret_val) - goto out; - - /* Save off the PHY page for future writes. */ - if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { - phy_page = reg_data; - continue; - } - - reg_addr &= PHY_REG_MASK; - reg_addr |= phy_page; - - ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr, - reg_data); - if (ret_val) - goto out; - } - -out: - hw->phy.ops.release(hw); - return ret_val; -} - -/** - * e1000_k1_gig_workaround_hv - K1 Si workaround - * @hw: pointer to the HW structure - * @link: link up bool flag - * - * If K1 is enabled for 1Gbps, the MAC might stall when transitioning - * from a lower speed. This workaround disables K1 whenever link is at 1Gig - * If link is down, the function will restore the default K1 setting located - * in the NVM. - **/ -static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) -{ - s32 ret_val = 0; - u16 status_reg = 0; - bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled; - - if (hw->mac.type != e1000_pchlan) - goto out; - - /* Wrap the whole flow with the sw flag */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ - if (link) { - if (hw->phy.type == e1000_phy_82578) { - ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS, - &status_reg); - if (ret_val) - goto release; - - status_reg &= BM_CS_STATUS_LINK_UP | - BM_CS_STATUS_RESOLVED | - BM_CS_STATUS_SPEED_MASK; - - if (status_reg == (BM_CS_STATUS_LINK_UP | - BM_CS_STATUS_RESOLVED | - BM_CS_STATUS_SPEED_1000)) - k1_enable = false; - } - - if (hw->phy.type == e1000_phy_82577) { - ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS, - &status_reg); - if (ret_val) - goto release; - - status_reg &= HV_M_STATUS_LINK_UP | - HV_M_STATUS_AUTONEG_COMPLETE | - HV_M_STATUS_SPEED_MASK; - - if (status_reg == (HV_M_STATUS_LINK_UP | - HV_M_STATUS_AUTONEG_COMPLETE | - HV_M_STATUS_SPEED_1000)) - k1_enable = false; - } - - /* Link stall fix for link up */ - ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), - 0x0100); - if (ret_val) - goto release; - - } else { - /* Link stall fix for link down */ - ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), - 0x4100); - if (ret_val) - goto release; - } - - ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); - -release: - hw->phy.ops.release(hw); -out: - return ret_val; -} - -/** - * e1000_configure_k1_ich8lan - Configure K1 power state - * @hw: pointer to the HW structure - * @enable: K1 state to configure - * - * Configure the K1 power state based on the provided parameter. - * Assumes semaphore already acquired. - * - * Success returns 0, Failure returns -E1000_ERR_PHY (-2) - **/ -s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) -{ - s32 ret_val = 0; - u32 ctrl_reg = 0; - u32 ctrl_ext = 0; - u32 reg = 0; - u16 kmrn_reg = 0; - - ret_val = e1000e_read_kmrn_reg_locked(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - &kmrn_reg); - if (ret_val) - goto out; - - if (k1_enable) - kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE; - else - kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE; - - ret_val = e1000e_write_kmrn_reg_locked(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - kmrn_reg); - if (ret_val) - goto out; - - udelay(20); - ctrl_ext = er32(CTRL_EXT); - ctrl_reg = er32(CTRL); - - reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - reg |= E1000_CTRL_FRCSPD; - ew32(CTRL, reg); - - ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); - e1e_flush(); - udelay(20); - ew32(CTRL, ctrl_reg); - ew32(CTRL_EXT, ctrl_ext); - e1e_flush(); - udelay(20); - -out: - return ret_val; -} - -/** - * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration - * @hw: pointer to the HW structure - * @d0_state: boolean if entering d0 or d3 device state - * - * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are - * collectively called OEM bits. The OEM Write Enable bit and SW Config bit - * in NVM determines whether HW should configure LPLU and Gbe Disable. - **/ -static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) -{ - s32 ret_val = 0; - u32 mac_reg; - u16 oem_reg; - - if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan)) - return ret_val; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - if (!(hw->mac.type == e1000_pch2lan)) { - mac_reg = er32(EXTCNF_CTRL); - if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) - goto out; - } - - mac_reg = er32(FEXTNVM); - if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M)) - goto out; - - mac_reg = er32(PHY_CTRL); - - ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg); - if (ret_val) - goto out; - - oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU); - - if (d0_state) { - if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE) - oem_reg |= HV_OEM_BITS_GBE_DIS; - - if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) - oem_reg |= HV_OEM_BITS_LPLU; - } else { - if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE) - oem_reg |= HV_OEM_BITS_GBE_DIS; - - if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU) - oem_reg |= HV_OEM_BITS_LPLU; - } - /* Restart auto-neg to activate the bits */ - if (!e1000_check_reset_block(hw)) - oem_reg |= HV_OEM_BITS_RESTART_AN; - ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg); - -out: - hw->phy.ops.release(hw); - - return ret_val; -} - - -/** - * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode - * @hw: pointer to the HW structure - **/ -static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw) -{ - s32 ret_val; - u16 data; - - ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data); - if (ret_val) - return ret_val; - - data |= HV_KMRN_MDIO_SLOW; - - ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data); - - return ret_val; -} - -/** - * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be - * done after every PHY reset. - **/ -static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val = 0; - u16 phy_data; - - if (hw->mac.type != e1000_pchlan) - return ret_val; - - /* Set MDIO slow mode before any other MDIO access */ - if (hw->phy.type == e1000_phy_82577) { - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (ret_val) - goto out; - } - - if (((hw->phy.type == e1000_phy_82577) && - ((hw->phy.revision == 1) || (hw->phy.revision == 2))) || - ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) { - /* Disable generation of early preamble */ - ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431); - if (ret_val) - return ret_val; - - /* Preamble tuning for SSC */ - ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204); - if (ret_val) - return ret_val; - } - - if (hw->phy.type == e1000_phy_82578) { - /* - * Return registers to default by doing a soft reset then - * writing 0x3140 to the control register. - */ - if (hw->phy.revision < 2) { - e1000e_phy_sw_reset(hw); - ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140); - } - } - - /* Select page 0 */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - hw->phy.addr = 1; - ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); - hw->phy.ops.release(hw); - if (ret_val) - goto out; - - /* - * Configure the K1 Si workaround during phy reset assuming there is - * link so that it disables K1 if link is in 1Gbps. - */ - ret_val = e1000_k1_gig_workaround_hv(hw, true); - if (ret_val) - goto out; - - /* Workaround for link disconnects on a busy hub in half duplex */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - ret_val = hw->phy.ops.read_reg_locked(hw, BM_PORT_GEN_CFG, &phy_data); - if (ret_val) - goto release; - ret_val = hw->phy.ops.write_reg_locked(hw, BM_PORT_GEN_CFG, - phy_data & 0x00FF); -release: - hw->phy.ops.release(hw); -out: - return ret_val; -} - -/** - * e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY - * @hw: pointer to the HW structure - **/ -void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw) -{ - u32 mac_reg; - u16 i, phy_reg = 0; - s32 ret_val; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return; - ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg); - if (ret_val) - goto release; - - /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { - mac_reg = er32(RAL(i)); - hw->phy.ops.write_reg_page(hw, BM_RAR_L(i), - (u16)(mac_reg & 0xFFFF)); - hw->phy.ops.write_reg_page(hw, BM_RAR_M(i), - (u16)((mac_reg >> 16) & 0xFFFF)); - - mac_reg = er32(RAH(i)); - hw->phy.ops.write_reg_page(hw, BM_RAR_H(i), - (u16)(mac_reg & 0xFFFF)); - hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i), - (u16)((mac_reg & E1000_RAH_AV) - >> 16)); - } - - e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg); - -release: - hw->phy.ops.release(hw); -} - -/** - * e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation - * with 82579 PHY - * @hw: pointer to the HW structure - * @enable: flag to enable/disable workaround when enabling/disabling jumbos - **/ -s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) -{ - s32 ret_val = 0; - u16 phy_reg, data; - u32 mac_reg; - u16 i; - - if (hw->mac.type != e1000_pch2lan) - goto out; - - /* disable Rx path while enabling/disabling workaround */ - e1e_rphy(hw, PHY_REG(769, 20), &phy_reg); - ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14)); - if (ret_val) - goto out; - - if (enable) { - /* - * Write Rx addresses (rar_entry_count for RAL/H, +4 for - * SHRAL/H) and initial CRC values to the MAC - */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { - u8 mac_addr[ETH_ALEN] = {0}; - u32 addr_high, addr_low; - - addr_high = er32(RAH(i)); - if (!(addr_high & E1000_RAH_AV)) - continue; - addr_low = er32(RAL(i)); - mac_addr[0] = (addr_low & 0xFF); - mac_addr[1] = ((addr_low >> 8) & 0xFF); - mac_addr[2] = ((addr_low >> 16) & 0xFF); - mac_addr[3] = ((addr_low >> 24) & 0xFF); - mac_addr[4] = (addr_high & 0xFF); - mac_addr[5] = ((addr_high >> 8) & 0xFF); - - ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr)); - } - - /* Write Rx addresses to the PHY */ - e1000_copy_rx_addrs_to_phy_ich8lan(hw); - - /* Enable jumbo frame workaround in the MAC */ - mac_reg = er32(FFLT_DBG); - mac_reg &= ~(1 << 14); - mac_reg |= (7 << 15); - ew32(FFLT_DBG, mac_reg); - - mac_reg = er32(RCTL); - mac_reg |= E1000_RCTL_SECRC; - ew32(RCTL, mac_reg); - - ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_CTRL_OFFSET, - &data); - if (ret_val) - goto out; - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_CTRL_OFFSET, - data | (1 << 0)); - if (ret_val) - goto out; - ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_HD_CTRL, - &data); - if (ret_val) - goto out; - data &= ~(0xF << 8); - data |= (0xB << 8); - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_HD_CTRL, - data); - if (ret_val) - goto out; - - /* Enable jumbo frame workaround in the PHY */ - e1e_rphy(hw, PHY_REG(769, 23), &data); - data &= ~(0x7F << 5); - data |= (0x37 << 5); - ret_val = e1e_wphy(hw, PHY_REG(769, 23), data); - if (ret_val) - goto out; - e1e_rphy(hw, PHY_REG(769, 16), &data); - data &= ~(1 << 13); - ret_val = e1e_wphy(hw, PHY_REG(769, 16), data); - if (ret_val) - goto out; - e1e_rphy(hw, PHY_REG(776, 20), &data); - data &= ~(0x3FF << 2); - data |= (0x1A << 2); - ret_val = e1e_wphy(hw, PHY_REG(776, 20), data); - if (ret_val) - goto out; - ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xFE00); - if (ret_val) - goto out; - e1e_rphy(hw, HV_PM_CTRL, &data); - ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10)); - if (ret_val) - goto out; - } else { - /* Write MAC register values back to h/w defaults */ - mac_reg = er32(FFLT_DBG); - mac_reg &= ~(0xF << 14); - ew32(FFLT_DBG, mac_reg); - - mac_reg = er32(RCTL); - mac_reg &= ~E1000_RCTL_SECRC; - ew32(RCTL, mac_reg); - - ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_CTRL_OFFSET, - &data); - if (ret_val) - goto out; - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_CTRL_OFFSET, - data & ~(1 << 0)); - if (ret_val) - goto out; - ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_HD_CTRL, - &data); - if (ret_val) - goto out; - data &= ~(0xF << 8); - data |= (0xB << 8); - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_HD_CTRL, - data); - if (ret_val) - goto out; - - /* Write PHY register values back to h/w defaults */ - e1e_rphy(hw, PHY_REG(769, 23), &data); - data &= ~(0x7F << 5); - ret_val = e1e_wphy(hw, PHY_REG(769, 23), data); - if (ret_val) - goto out; - e1e_rphy(hw, PHY_REG(769, 16), &data); - data |= (1 << 13); - ret_val = e1e_wphy(hw, PHY_REG(769, 16), data); - if (ret_val) - goto out; - e1e_rphy(hw, PHY_REG(776, 20), &data); - data &= ~(0x3FF << 2); - data |= (0x8 << 2); - ret_val = e1e_wphy(hw, PHY_REG(776, 20), data); - if (ret_val) - goto out; - ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00); - if (ret_val) - goto out; - e1e_rphy(hw, HV_PM_CTRL, &data); - ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10)); - if (ret_val) - goto out; - } - - /* re-enable Rx path after enabling/disabling workaround */ - ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14)); - -out: - return ret_val; -} - -/** - * e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be - * done after every PHY reset. - **/ -static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val = 0; - - if (hw->mac.type != e1000_pch2lan) - goto out; - - /* Set MDIO slow mode before any other MDIO access */ - ret_val = e1000_set_mdio_slow_mode_hv(hw); - -out: - return ret_val; -} - -/** - * e1000_k1_gig_workaround_lv - K1 Si workaround - * @hw: pointer to the HW structure - * - * Workaround to set the K1 beacon duration for 82579 parts - **/ -static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) -{ - s32 ret_val = 0; - u16 status_reg = 0; - u32 mac_reg; - - if (hw->mac.type != e1000_pch2lan) - goto out; - - /* Set K1 beacon duration based on 1Gbps speed or otherwise */ - ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); - if (ret_val) - goto out; - - if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) - == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { - mac_reg = er32(FEXTNVM4); - mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - - if (status_reg & HV_M_STATUS_SPEED_1000) - mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - else - mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - - ew32(FEXTNVM4, mac_reg); - } - -out: - return ret_val; -} - -/** - * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware - * @hw: pointer to the HW structure - * @gate: boolean set to true to gate, false to ungate - * - * Gate/ungate the automatic PHY configuration via hardware; perform - * the configuration via software instead. - **/ -static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate) -{ - u32 extcnf_ctrl; - - if (hw->mac.type != e1000_pch2lan) - return; - - extcnf_ctrl = er32(EXTCNF_CTRL); - - if (gate) - extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; - else - extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG; - - ew32(EXTCNF_CTRL, extcnf_ctrl); - return; -} - -/** - * e1000_lan_init_done_ich8lan - Check for PHY config completion - * @hw: pointer to the HW structure - * - * Check the appropriate indication the MAC has finished configuring the - * PHY after a software reset. - **/ -static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) -{ - u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT; - - /* Wait for basic configuration completes before proceeding */ - do { - data = er32(STATUS); - data &= E1000_STATUS_LAN_INIT_DONE; - udelay(100); - } while ((!data) && --loop); - - /* - * If basic configuration is incomplete before the above loop - * count reaches 0, loading the configuration from NVM will - * leave the PHY in a bad state possibly resulting in no link. - */ - if (loop == 0) - e_dbg("LAN_INIT_DONE not set, increase timeout\n"); - - /* Clear the Init Done bit for the next init event */ - data = er32(STATUS); - data &= ~E1000_STATUS_LAN_INIT_DONE; - ew32(STATUS, data); -} - -/** - * e1000_post_phy_reset_ich8lan - Perform steps required after a PHY reset - * @hw: pointer to the HW structure - **/ -static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val = 0; - u16 reg; - - if (e1000_check_reset_block(hw)) - goto out; - - /* Allow time for h/w to get to quiescent state after reset */ - usleep_range(10000, 20000); - - /* Perform any necessary post-reset workarounds */ - switch (hw->mac.type) { - case e1000_pchlan: - ret_val = e1000_hv_phy_workarounds_ich8lan(hw); - if (ret_val) - goto out; - break; - case e1000_pch2lan: - ret_val = e1000_lv_phy_workarounds_ich8lan(hw); - if (ret_val) - goto out; - break; - default: - break; - } - - /* Clear the host wakeup bit after lcd reset */ - if (hw->mac.type >= e1000_pchlan) { - e1e_rphy(hw, BM_PORT_GEN_CFG, ®); - reg &= ~BM_WUC_HOST_WU_BIT; - e1e_wphy(hw, BM_PORT_GEN_CFG, reg); - } - - /* Configure the LCD with the extended configuration region in NVM */ - ret_val = e1000_sw_lcd_config_ich8lan(hw); - if (ret_val) - goto out; - - /* Configure the LCD with the OEM bits in NVM */ - ret_val = e1000_oem_bits_config_ich8lan(hw, true); - - if (hw->mac.type == e1000_pch2lan) { - /* Ungate automatic PHY configuration on non-managed 82579 */ - if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - usleep_range(10000, 20000); - e1000_gate_hw_phy_config_ich8lan(hw, false); - } - - /* Set EEE LPI Update Timer to 200usec */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR, - I82579_LPI_UPDATE_TIMER); - if (ret_val) - goto release; - ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA, - 0x1387); -release: - hw->phy.ops.release(hw); - } - -out: - return ret_val; -} - -/** - * e1000_phy_hw_reset_ich8lan - Performs a PHY reset - * @hw: pointer to the HW structure - * - * Resets the PHY - * This is a function pointer entry point called by drivers - * or other shared routines. - **/ -static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val = 0; - - /* Gate automatic PHY configuration by hardware on non-managed 82579 */ - if ((hw->mac.type == e1000_pch2lan) && - !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - - ret_val = e1000e_phy_hw_reset_generic(hw); - if (ret_val) - goto out; - - ret_val = e1000_post_phy_reset_ich8lan(hw); - -out: - return ret_val; -} - -/** - * e1000_set_lplu_state_pchlan - Set Low Power Link Up state - * @hw: pointer to the HW structure - * @active: true to enable LPLU, false to disable - * - * Sets the LPLU state according to the active flag. For PCH, if OEM write - * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set - * the phy speed. This function will manually set the LPLU bit and restart - * auto-neg as hw would do. D3 and D0 LPLU will call the same function - * since it configures the same bit. - **/ -static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) -{ - s32 ret_val = 0; - u16 oem_reg; - - ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); - if (ret_val) - goto out; - - if (active) - oem_reg |= HV_OEM_BITS_LPLU; - else - oem_reg &= ~HV_OEM_BITS_LPLU; - - oem_reg |= HV_OEM_BITS_RESTART_AN; - ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg); - -out: - return ret_val; -} - -/** - * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state - * @hw: pointer to the HW structure - * @active: true to enable LPLU, false to disable - * - * Sets the LPLU D0 state according to the active flag. When - * activating LPLU this function also disables smart speed - * and vice versa. LPLU will not be activated unless the - * device autonegotiation advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at all duplexes. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 phy_ctrl; - s32 ret_val = 0; - u16 data; - - if (phy->type == e1000_phy_ife) - return ret_val; - - phy_ctrl = er32(PHY_CTRL); - - if (active) { - phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - - if (phy->type != e1000_phy_igp_3) - return 0; - - /* - * Call gig speed drop workaround on LPLU before accessing - * any PHY registers - */ - if (hw->mac.type == e1000_ich8lan) - e1000e_gig_downshift_workaround_ich8lan(hw); - - /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); - if (ret_val) - return ret_val; - } else { - phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - - if (phy->type != e1000_phy_igp_3) - return 0; - - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - return ret_val; - } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - return ret_val; - } - } - - return 0; -} - -/** - * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state - * @hw: pointer to the HW structure - * @active: true to enable LPLU, false to disable - * - * Sets the LPLU D3 state according to the active flag. When - * activating LPLU this function also disables smart speed - * and vice versa. LPLU will not be activated unless the - * device autonegotiation advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at all duplexes. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - u32 phy_ctrl; - s32 ret_val; - u16 data; - - phy_ctrl = er32(PHY_CTRL); - - if (!active) { - phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - - if (phy->type != e1000_phy_igp_3) - return 0; - - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - return ret_val; - } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - return ret_val; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - return ret_val; - } - } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { - phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; - ew32(PHY_CTRL, phy_ctrl); - - if (phy->type != e1000_phy_igp_3) - return 0; - - /* - * Call gig speed drop workaround on LPLU before accessing - * any PHY registers - */ - if (hw->mac.type == e1000_ich8lan) - e1000e_gig_downshift_workaround_ich8lan(hw); - - /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); - if (ret_val) - return ret_val; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); - } - - return 0; -} - -/** - * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1 - * @hw: pointer to the HW structure - * @bank: pointer to the variable that returns the active bank - * - * Reads signature byte from the NVM using the flash access registers. - * Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank. - **/ -static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) -{ - u32 eecd; - struct e1000_nvm_info *nvm = &hw->nvm; - u32 bank1_offset = nvm->flash_bank_size * sizeof(u16); - u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1; - u8 sig_byte = 0; - s32 ret_val = 0; - - switch (hw->mac.type) { - case e1000_ich8lan: - case e1000_ich9lan: - eecd = er32(EECD); - if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) == - E1000_EECD_SEC1VAL_VALID_MASK) { - if (eecd & E1000_EECD_SEC1VAL) - *bank = 1; - else - *bank = 0; - - return 0; - } - e_dbg("Unable to determine valid NVM bank via EEC - " - "reading flash signature\n"); - /* fall-thru */ - default: - /* set bank to 0 in case flash read fails */ - *bank = 0; - - /* Check bank 0 */ - ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset, - &sig_byte); - if (ret_val) - return ret_val; - if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == - E1000_ICH_NVM_SIG_VALUE) { - *bank = 0; - return 0; - } - - /* Check bank 1 */ - ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset + - bank1_offset, - &sig_byte); - if (ret_val) - return ret_val; - if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == - E1000_ICH_NVM_SIG_VALUE) { - *bank = 1; - return 0; - } - - e_dbg("ERROR: No valid NVM bank present\n"); - return -E1000_ERR_NVM; - } - - return 0; -} - -/** - * e1000_read_nvm_ich8lan - Read word(s) from the NVM - * @hw: pointer to the HW structure - * @offset: The offset (in bytes) of the word(s) to read. - * @words: Size of data to read in words - * @data: Pointer to the word(s) to read at offset. - * - * Reads a word(s) from the NVM using the flash access registers. - **/ -static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - u32 act_offset; - s32 ret_val = 0; - u32 bank = 0; - u16 i, word; - - if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || - (words == 0)) { - e_dbg("nvm parameter(s) out of bounds\n"); - ret_val = -E1000_ERR_NVM; - goto out; - } - - nvm->ops.acquire(hw); - - ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); - if (ret_val) { - e_dbg("Could not detect valid bank, assuming bank 0\n"); - bank = 0; - } - - act_offset = (bank) ? nvm->flash_bank_size : 0; - act_offset += offset; - - ret_val = 0; - for (i = 0; i < words; i++) { - if (dev_spec->shadow_ram[offset+i].modified) { - data[i] = dev_spec->shadow_ram[offset+i].value; - } else { - ret_val = e1000_read_flash_word_ich8lan(hw, - act_offset + i, - &word); - if (ret_val) - break; - data[i] = word; - } - } - - nvm->ops.release(hw); - -out: - if (ret_val) - e_dbg("NVM read error: %d\n", ret_val); - - return ret_val; -} - -/** - * e1000_flash_cycle_init_ich8lan - Initialize flash - * @hw: pointer to the HW structure - * - * This function does initial flash setup so that a new read/write/erase cycle - * can be started. - **/ -static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) -{ - union ich8_hws_flash_status hsfsts; - s32 ret_val = -E1000_ERR_NVM; - - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - - /* Check if the flash descriptor is valid */ - if (hsfsts.hsf_status.fldesvalid == 0) { - e_dbg("Flash descriptor invalid. " - "SW Sequencing must be used.\n"); - return -E1000_ERR_NVM; - } - - /* Clear FCERR and DAEL in hw status by writing 1 */ - hsfsts.hsf_status.flcerr = 1; - hsfsts.hsf_status.dael = 1; - - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); - - /* - * Either we should have a hardware SPI cycle in progress - * bit to check against, in order to start a new cycle or - * FDONE bit should be changed in the hardware so that it - * is 1 after hardware reset, which can then be used as an - * indication whether a cycle is in progress or has been - * completed. - */ - - if (hsfsts.hsf_status.flcinprog == 0) { - /* - * There is no cycle running at present, - * so we can start a cycle. - * Begin by setting Flash Cycle Done. - */ - hsfsts.hsf_status.flcdone = 1; - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); - ret_val = 0; - } else { - s32 i = 0; - - /* - * Otherwise poll for sometime so the current - * cycle has a chance to end before giving up. - */ - for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { - hsfsts.regval = __er16flash(hw, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcinprog == 0) { - ret_val = 0; - break; - } - udelay(1); - } - if (ret_val == 0) { - /* - * Successful in waiting for previous cycle to timeout, - * now set the Flash Cycle Done. - */ - hsfsts.hsf_status.flcdone = 1; - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); - } else { - e_dbg("Flash controller busy, cannot get access\n"); - } - } - - return ret_val; -} - -/** - * e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase) - * @hw: pointer to the HW structure - * @timeout: maximum time to wait for completion - * - * This function starts a flash cycle and waits for its completion. - **/ -static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout) -{ - union ich8_hws_flash_ctrl hsflctl; - union ich8_hws_flash_status hsfsts; - s32 ret_val = -E1000_ERR_NVM; - u32 i = 0; - - /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcgo = 1; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); - - /* wait till FDONE bit is set to 1 */ - do { - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcdone == 1) - break; - udelay(1); - } while (i++ < timeout); - - if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) - return 0; - - return ret_val; -} - -/** - * e1000_read_flash_word_ich8lan - Read word from flash - * @hw: pointer to the HW structure - * @offset: offset to data location - * @data: pointer to the location for storing the data - * - * Reads the flash word at offset into data. Offset is converted - * to bytes before read. - **/ -static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, - u16 *data) -{ - /* Must convert offset into bytes. */ - offset <<= 1; - - return e1000_read_flash_data_ich8lan(hw, offset, 2, data); -} - -/** - * e1000_read_flash_byte_ich8lan - Read byte from flash - * @hw: pointer to the HW structure - * @offset: The offset of the byte to read. - * @data: Pointer to a byte to store the value read. - * - * Reads a single byte from the NVM using the flash access registers. - **/ -static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, - u8 *data) -{ - s32 ret_val; - u16 word = 0; - - ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); - if (ret_val) - return ret_val; - - *data = (u8)word; - - return 0; -} - -/** - * e1000_read_flash_data_ich8lan - Read byte or word from NVM - * @hw: pointer to the HW structure - * @offset: The offset (in bytes) of the byte or word to read. - * @size: Size of data to read, 1=byte 2=word - * @data: Pointer to the word to store the value read. - * - * Reads a byte or word from the NVM using the flash access registers. - **/ -static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, - u8 size, u16 *data) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_addr; - u32 flash_data = 0; - s32 ret_val = -E1000_ERR_NVM; - u8 count = 0; - - if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) - return -E1000_ERR_NVM; - - flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) + - hw->nvm.flash_base_addr; - - do { - udelay(1); - /* Steps */ - ret_val = e1000_flash_cycle_init_ich8lan(hw); - if (ret_val != 0) - break; - - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); - /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = size - 1; - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); - - ew32flash(ICH_FLASH_FADDR, flash_linear_addr); - - ret_val = e1000_flash_cycle_ich8lan(hw, - ICH_FLASH_READ_COMMAND_TIMEOUT); - - /* - * Check if FCERR is set to 1, if set to 1, clear it - * and try the whole sequence a few more times, else - * read in (shift in) the Flash Data0, the order is - * least significant byte first msb to lsb - */ - if (ret_val == 0) { - flash_data = er32flash(ICH_FLASH_FDATA0); - if (size == 1) - *data = (u8)(flash_data & 0x000000FF); - else if (size == 2) - *data = (u16)(flash_data & 0x0000FFFF); - break; - } else { - /* - * If we've gotten here, then things are probably - * completely hosed, but if the error condition is - * detected, it won't hurt to give it another try... - * ICH_FLASH_CYCLE_REPEAT_COUNT times. - */ - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) { - /* Repeat for some time before giving up. */ - continue; - } else if (hsfsts.hsf_status.flcdone == 0) { - e_dbg("Timeout error - flash cycle " - "did not complete.\n"); - break; - } - } - } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); - - return ret_val; -} - -/** - * e1000_write_nvm_ich8lan - Write word(s) to the NVM - * @hw: pointer to the HW structure - * @offset: The offset (in bytes) of the word(s) to write. - * @words: Size of data to write in words - * @data: Pointer to the word(s) to write at offset. - * - * Writes a byte or word to the NVM using the flash access registers. - **/ -static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - u16 i; - - if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || - (words == 0)) { - e_dbg("nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; - } - - nvm->ops.acquire(hw); - - for (i = 0; i < words; i++) { - dev_spec->shadow_ram[offset+i].modified = true; - dev_spec->shadow_ram[offset+i].value = data[i]; - } - - nvm->ops.release(hw); - - return 0; -} - -/** - * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM - * @hw: pointer to the HW structure - * - * The NVM checksum is updated by calling the generic update_nvm_checksum, - * which writes the checksum to the shadow ram. The changes in the shadow - * ram are then committed to the EEPROM by processing each bank at a time - * checking for the modified bit and writing only the pending changes. - * After a successful commit, the shadow ram is cleared and is ready for - * future writes. - **/ -static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - u32 i, act_offset, new_bank_offset, old_bank_offset, bank; - s32 ret_val; - u16 data; - - ret_val = e1000e_update_nvm_checksum_generic(hw); - if (ret_val) - goto out; - - if (nvm->type != e1000_nvm_flash_sw) - goto out; - - nvm->ops.acquire(hw); - - /* - * We're writing to the opposite bank so if we're on bank 1, - * write to bank 0 etc. We also need to erase the segment that - * is going to be written - */ - ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); - if (ret_val) { - e_dbg("Could not detect valid bank, assuming bank 0\n"); - bank = 0; - } - - if (bank == 0) { - new_bank_offset = nvm->flash_bank_size; - old_bank_offset = 0; - ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); - if (ret_val) - goto release; - } else { - old_bank_offset = nvm->flash_bank_size; - new_bank_offset = 0; - ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); - if (ret_val) - goto release; - } - - for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { - /* - * Determine whether to write the value stored - * in the other NVM bank or a modified value stored - * in the shadow RAM - */ - if (dev_spec->shadow_ram[i].modified) { - data = dev_spec->shadow_ram[i].value; - } else { - ret_val = e1000_read_flash_word_ich8lan(hw, i + - old_bank_offset, - &data); - if (ret_val) - break; - } - - /* - * If the word is 0x13, then make sure the signature bits - * (15:14) are 11b until the commit has completed. - * This will allow us to write 10b which indicates the - * signature is valid. We want to do this after the write - * has completed so that we don't mark the segment valid - * while the write is still in progress - */ - if (i == E1000_ICH_NVM_SIG_WORD) - data |= E1000_ICH_NVM_SIG_MASK; - - /* Convert offset to bytes. */ - act_offset = (i + new_bank_offset) << 1; - - udelay(100); - /* Write the bytes to the new bank. */ - ret_val = e1000_retry_write_flash_byte_ich8lan(hw, - act_offset, - (u8)data); - if (ret_val) - break; - - udelay(100); - ret_val = e1000_retry_write_flash_byte_ich8lan(hw, - act_offset + 1, - (u8)(data >> 8)); - if (ret_val) - break; - } - - /* - * Don't bother writing the segment valid bits if sector - * programming failed. - */ - if (ret_val) { - /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ - e_dbg("Flash commit failed.\n"); - goto release; - } - - /* - * Finally validate the new segment by setting bit 15:14 - * to 10b in word 0x13 , this can be done without an - * erase as well since these bits are 11 to start with - * and we need to change bit 14 to 0b - */ - act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; - ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); - if (ret_val) - goto release; - - data &= 0xBFFF; - ret_val = e1000_retry_write_flash_byte_ich8lan(hw, - act_offset * 2 + 1, - (u8)(data >> 8)); - if (ret_val) - goto release; - - /* - * And invalidate the previously valid segment by setting - * its signature word (0x13) high_byte to 0b. This can be - * done without an erase because flash erase sets all bits - * to 1's. We can write 1's to 0's without an erase - */ - act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; - ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); - if (ret_val) - goto release; - - /* Great! Everything worked, we can now clear the cached entries. */ - for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { - dev_spec->shadow_ram[i].modified = false; - dev_spec->shadow_ram[i].value = 0xFFFF; - } - -release: - nvm->ops.release(hw); - - /* - * Reload the EEPROM, or else modifications will not appear - * until after the next adapter reset. - */ - if (!ret_val) { - e1000e_reload_nvm(hw); - usleep_range(10000, 20000); - } - -out: - if (ret_val) - e_dbg("NVM update error: %d\n", ret_val); - - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Check to see if checksum needs to be fixed by reading bit 6 in word 0x19. - * If the bit is 0, that the EEPROM had been modified, but the checksum was not - * calculated, in which case we need to calculate the checksum and set bit 6. - **/ -static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val; - u16 data; - - /* - * Read 0x19 and check bit 6. If this bit is 0, the checksum - * needs to be fixed. This bit is an indication that the NVM - * was prepared by OEM software and did not calculate the - * checksum...a likely scenario. - */ - ret_val = e1000_read_nvm(hw, 0x19, 1, &data); - if (ret_val) - return ret_val; - - if ((data & 0x40) == 0) { - data |= 0x40; - ret_val = e1000_write_nvm(hw, 0x19, 1, &data); - if (ret_val) - return ret_val; - ret_val = e1000e_update_nvm_checksum(hw); - if (ret_val) - return ret_val; - } - - return e1000e_validate_nvm_checksum_generic(hw); -} - -/** - * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only - * @hw: pointer to the HW structure - * - * To prevent malicious write/erase of the NVM, set it to be read-only - * so that the hardware ignores all write/erase cycles of the NVM via - * the flash control registers. The shadow-ram copy of the NVM will - * still be updated, however any updates to this copy will not stick - * across driver reloads. - **/ -void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - union ich8_flash_protected_range pr0; - union ich8_hws_flash_status hsfsts; - u32 gfpreg; - - nvm->ops.acquire(hw); - - gfpreg = er32flash(ICH_FLASH_GFPREG); - - /* Write-protect GbE Sector of NVM */ - pr0.regval = er32flash(ICH_FLASH_PR0); - pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK; - pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK); - pr0.range.wpe = true; - ew32flash(ICH_FLASH_PR0, pr0.regval); - - /* - * Lock down a subset of GbE Flash Control Registers, e.g. - * PR0 to prevent the write-protection from being lifted. - * Once FLOCKDN is set, the registers protected by it cannot - * be written until FLOCKDN is cleared by a hardware reset. - */ - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - hsfsts.hsf_status.flockdn = true; - ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); - - nvm->ops.release(hw); -} - -/** - * e1000_write_flash_data_ich8lan - Writes bytes to the NVM - * @hw: pointer to the HW structure - * @offset: The offset (in bytes) of the byte/word to read. - * @size: Size of data to read, 1=byte 2=word - * @data: The byte(s) to write to the NVM. - * - * Writes one/two bytes to the NVM using the flash access registers. - **/ -static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, - u8 size, u16 data) -{ - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_addr; - u32 flash_data = 0; - s32 ret_val; - u8 count = 0; - - if (size < 1 || size > 2 || data > size * 0xff || - offset > ICH_FLASH_LINEAR_ADDR_MASK) - return -E1000_ERR_NVM; - - flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) + - hw->nvm.flash_base_addr; - - do { - udelay(1); - /* Steps */ - ret_val = e1000_flash_cycle_init_ich8lan(hw); - if (ret_val) - break; - - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); - /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = size -1; - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); - - ew32flash(ICH_FLASH_FADDR, flash_linear_addr); - - if (size == 1) - flash_data = (u32)data & 0x00FF; - else - flash_data = (u32)data; - - ew32flash(ICH_FLASH_FDATA0, flash_data); - - /* - * check if FCERR is set to 1 , if set to 1, clear it - * and try the whole sequence a few more times else done - */ - ret_val = e1000_flash_cycle_ich8lan(hw, - ICH_FLASH_WRITE_COMMAND_TIMEOUT); - if (!ret_val) - break; - - /* - * If we're here, then things are most likely - * completely hosed, but if the error condition - * is detected, it won't hurt to give it another - * try...ICH_FLASH_CYCLE_REPEAT_COUNT times. - */ - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) - /* Repeat for some time before giving up. */ - continue; - if (hsfsts.hsf_status.flcdone == 0) { - e_dbg("Timeout error - flash cycle " - "did not complete."); - break; - } - } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); - - return ret_val; -} - -/** - * e1000_write_flash_byte_ich8lan - Write a single byte to NVM - * @hw: pointer to the HW structure - * @offset: The index of the byte to read. - * @data: The byte to write to the NVM. - * - * Writes a single byte to the NVM using the flash access registers. - **/ -static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, - u8 data) -{ - u16 word = (u16)data; - - return e1000_write_flash_data_ich8lan(hw, offset, 1, word); -} - -/** - * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM - * @hw: pointer to the HW structure - * @offset: The offset of the byte to write. - * @byte: The byte to write to the NVM. - * - * Writes a single byte to the NVM using the flash access registers. - * Goes through a retry algorithm before giving up. - **/ -static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, - u32 offset, u8 byte) -{ - s32 ret_val; - u16 program_retries; - - ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); - if (!ret_val) - return ret_val; - - for (program_retries = 0; program_retries < 100; program_retries++) { - e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset); - udelay(100); - ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); - if (!ret_val) - break; - } - if (program_retries == 100) - return -E1000_ERR_NVM; - - return 0; -} - -/** - * e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM - * @hw: pointer to the HW structure - * @bank: 0 for first bank, 1 for second bank, etc. - * - * Erases the bank specified. Each bank is a 4k block. Banks are 0 based. - * bank N is 4096 * N + flash_reg_addr. - **/ -static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32 flash_linear_addr; - /* bank size is in 16bit words - adjust to bytes */ - u32 flash_bank_size = nvm->flash_bank_size * 2; - s32 ret_val; - s32 count = 0; - s32 j, iteration, sector_size; - - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - - /* - * Determine HW Sector size: Read BERASE bits of hw flash status - * register - * 00: The Hw sector is 256 bytes, hence we need to erase 16 - * consecutive sectors. The start index for the nth Hw sector - * can be calculated as = bank * 4096 + n * 256 - * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. - * The start index for the nth Hw sector can be calculated - * as = bank * 4096 - * 10: The Hw sector is 8K bytes, nth sector = bank * 8192 - * (ich9 only, otherwise error condition) - * 11: The Hw sector is 64K bytes, nth sector = bank * 65536 - */ - switch (hsfsts.hsf_status.berasesz) { - case 0: - /* Hw sector size 256 */ - sector_size = ICH_FLASH_SEG_SIZE_256; - iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256; - break; - case 1: - sector_size = ICH_FLASH_SEG_SIZE_4K; - iteration = 1; - break; - case 2: - sector_size = ICH_FLASH_SEG_SIZE_8K; - iteration = 1; - break; - case 3: - sector_size = ICH_FLASH_SEG_SIZE_64K; - iteration = 1; - break; - default: - return -E1000_ERR_NVM; - } - - /* Start with the base address, then add the sector offset. */ - flash_linear_addr = hw->nvm.flash_base_addr; - flash_linear_addr += (bank) ? flash_bank_size : 0; - - for (j = 0; j < iteration ; j++) { - do { - /* Steps */ - ret_val = e1000_flash_cycle_init_ich8lan(hw); - if (ret_val) - return ret_val; - - /* - * Write a value 11 (block Erase) in Flash - * Cycle field in hw flash control - */ - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); - - /* - * Write the last 24 bits of an index within the - * block into Flash Linear address field in Flash - * Address. - */ - flash_linear_addr += (j * sector_size); - ew32flash(ICH_FLASH_FADDR, flash_linear_addr); - - ret_val = e1000_flash_cycle_ich8lan(hw, - ICH_FLASH_ERASE_COMMAND_TIMEOUT); - if (ret_val == 0) - break; - - /* - * Check if FCERR is set to 1. If 1, - * clear it and try the whole sequence - * a few more times else Done - */ - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcerr == 1) - /* repeat for some time before giving up */ - continue; - else if (hsfsts.hsf_status.flcdone == 0) - return ret_val; - } while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT); - } - - return 0; -} - -/** - * e1000_valid_led_default_ich8lan - Set the default LED settings - * @hw: pointer to the HW structure - * @data: Pointer to the LED settings - * - * Reads the LED default settings from the NVM to data. If the NVM LED - * settings is all 0's or F's, set the LED default to a valid LED default - * setting. - **/ -static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) -{ - s32 ret_val; - - ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); - if (ret_val) { - e_dbg("NVM Read Error\n"); - return ret_val; - } - - if (*data == ID_LED_RESERVED_0000 || - *data == ID_LED_RESERVED_FFFF) - *data = ID_LED_DEFAULT_ICH8LAN; - - return 0; -} - -/** - * e1000_id_led_init_pchlan - store LED configurations - * @hw: pointer to the HW structure - * - * PCH does not control LEDs via the LEDCTL register, rather it uses - * the PHY LED configuration register. - * - * PCH also does not have an "always on" or "always off" mode which - * complicates the ID feature. Instead of using the "on" mode to indicate - * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()), - * use "link_up" mode. The LEDs will still ID on request if there is no - * link based on logic in e1000_led_[on|off]_pchlan(). - **/ -static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP; - const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT; - u16 data, i, temp, shift; - - /* Get default ID LED modes */ - ret_val = hw->nvm.ops.valid_led_default(hw, &data); - if (ret_val) - goto out; - - mac->ledctl_default = er32(LEDCTL); - mac->ledctl_mode1 = mac->ledctl_default; - mac->ledctl_mode2 = mac->ledctl_default; - - for (i = 0; i < 4; i++) { - temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK; - shift = (i * 5); - switch (temp) { - case ID_LED_ON1_DEF2: - case ID_LED_ON1_ON2: - case ID_LED_ON1_OFF2: - mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift); - mac->ledctl_mode1 |= (ledctl_on << shift); - break; - case ID_LED_OFF1_DEF2: - case ID_LED_OFF1_ON2: - case ID_LED_OFF1_OFF2: - mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift); - mac->ledctl_mode1 |= (ledctl_off << shift); - break; - default: - /* Do nothing */ - break; - } - switch (temp) { - case ID_LED_DEF1_ON2: - case ID_LED_ON1_ON2: - case ID_LED_OFF1_ON2: - mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift); - mac->ledctl_mode2 |= (ledctl_on << shift); - break; - case ID_LED_DEF1_OFF2: - case ID_LED_ON1_OFF2: - case ID_LED_OFF1_OFF2: - mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift); - mac->ledctl_mode2 |= (ledctl_off << shift); - break; - default: - /* Do nothing */ - break; - } - } - -out: - return ret_val; -} - -/** - * e1000_get_bus_info_ich8lan - Get/Set the bus type and width - * @hw: pointer to the HW structure - * - * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability - * register, so the the bus width is hard coded. - **/ -static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) -{ - struct e1000_bus_info *bus = &hw->bus; - s32 ret_val; - - ret_val = e1000e_get_bus_info_pcie(hw); - - /* - * ICH devices are "PCI Express"-ish. They have - * a configuration space, but do not contain - * PCI Express Capability registers, so bus width - * must be hardcoded. - */ - if (bus->width == e1000_bus_width_unknown) - bus->width = e1000_bus_width_pcie_x1; - - return ret_val; -} - -/** - * e1000_reset_hw_ich8lan - Reset the hardware - * @hw: pointer to the HW structure - * - * Does a full reset of the hardware which includes a reset of the PHY and - * MAC. - **/ -static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) -{ - struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - u16 reg; - u32 ctrl, kab; - s32 ret_val; - - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection - * on the last TLP read/write transaction when MAC is reset. - */ - ret_val = e1000e_disable_pcie_master(hw); - if (ret_val) - e_dbg("PCI-E Master disable polling has failed.\n"); - - e_dbg("Masking off all interrupts\n"); - ew32(IMC, 0xffffffff); - - /* - * Disable the Transmit and Receive units. Then delay to allow - * any pending transactions to complete before we hit the MAC - * with the global reset. - */ - ew32(RCTL, 0); - ew32(TCTL, E1000_TCTL_PSP); - e1e_flush(); - - usleep_range(10000, 20000); - - /* Workaround for ICH8 bit corruption issue in FIFO memory */ - if (hw->mac.type == e1000_ich8lan) { - /* Set Tx and Rx buffer allocation to 8k apiece. */ - ew32(PBA, E1000_PBA_8K); - /* Set Packet Buffer Size to 16k. */ - ew32(PBS, E1000_PBS_16K); - } - - if (hw->mac.type == e1000_pchlan) { - /* Save the NVM K1 bit setting*/ - ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®); - if (ret_val) - return ret_val; - - if (reg & E1000_NVM_K1_ENABLE) - dev_spec->nvm_k1_enabled = true; - else - dev_spec->nvm_k1_enabled = false; - } - - ctrl = er32(CTRL); - - if (!e1000_check_reset_block(hw)) { - /* - * Full-chip reset requires MAC and PHY reset at the same - * time to make sure the interface between MAC and the - * external PHY is reset. - */ - ctrl |= E1000_CTRL_PHY_RST; - - /* - * Gate automatic PHY configuration by hardware on - * non-managed 82579 - */ - if ((hw->mac.type == e1000_pch2lan) && - !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - } - ret_val = e1000_acquire_swflag_ich8lan(hw); - e_dbg("Issuing a global reset to ich8lan\n"); - ew32(CTRL, (ctrl | E1000_CTRL_RST)); - /* cannot issue a flush here because it hangs the hardware */ - msleep(20); - - if (!ret_val) - mutex_unlock(&swflag_mutex); - - if (ctrl & E1000_CTRL_PHY_RST) { - ret_val = hw->phy.ops.get_cfg_done(hw); - if (ret_val) - goto out; - - ret_val = e1000_post_phy_reset_ich8lan(hw); - if (ret_val) - goto out; - } - - /* - * For PCH, this write will make sure that any noise - * will be detected as a CRC error and be dropped rather than show up - * as a bad packet to the DMA engine. - */ - if (hw->mac.type == e1000_pchlan) - ew32(CRC_OFFSET, 0x65656565); - - ew32(IMC, 0xffffffff); - er32(ICR); - - kab = er32(KABGTXD); - kab |= E1000_KABGTXD_BGSQLBIAS; - ew32(KABGTXD, kab); - -out: - return ret_val; -} - -/** - * e1000_init_hw_ich8lan - Initialize the hardware - * @hw: pointer to the HW structure - * - * Prepares the hardware for transmit and receive by doing the following: - * - initialize hardware bits - * - initialize LED identification - * - setup receive address registers - * - setup flow control - * - setup transmit descriptors - * - clear statistics - **/ -static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 ctrl_ext, txdctl, snoop; - s32 ret_val; - u16 i; - - e1000_initialize_hw_bits_ich8lan(hw); - - /* Initialize identification LED */ - ret_val = mac->ops.id_led_init(hw); - if (ret_val) - e_dbg("Error initializing identification LED\n"); - /* This is not fatal and we should not stop init due to this */ - - /* Setup the receive address. */ - e1000e_init_rx_addrs(hw, mac->rar_entry_count); - - /* Zero out the Multicast HASH table */ - e_dbg("Zeroing the MTA\n"); - for (i = 0; i < mac->mta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); - - /* - * The 82578 Rx buffer will stall if wakeup is enabled in host and - * the ME. Disable wakeup by clearing the host wakeup bit. - * Reset the phy after disabling host wakeup to reset the Rx buffer. - */ - if (hw->phy.type == e1000_phy_82578) { - e1e_rphy(hw, BM_PORT_GEN_CFG, &i); - i &= ~BM_WUC_HOST_WU_BIT; - e1e_wphy(hw, BM_PORT_GEN_CFG, i); - ret_val = e1000_phy_hw_reset_ich8lan(hw); - if (ret_val) - return ret_val; - } - - /* Setup link and flow control */ - ret_val = e1000_setup_link_ich8lan(hw); - - /* Set the transmit descriptor write-back policy for both queues */ - txdctl = er32(TXDCTL(0)); - txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) | - E1000_TXDCTL_FULL_TX_DESC_WB; - txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) | - E1000_TXDCTL_MAX_TX_DESC_PREFETCH; - ew32(TXDCTL(0), txdctl); - txdctl = er32(TXDCTL(1)); - txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) | - E1000_TXDCTL_FULL_TX_DESC_WB; - txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) | - E1000_TXDCTL_MAX_TX_DESC_PREFETCH; - ew32(TXDCTL(1), txdctl); - - /* - * ICH8 has opposite polarity of no_snoop bits. - * By default, we should use snoop behavior. - */ - if (mac->type == e1000_ich8lan) - snoop = PCIE_ICH8_SNOOP_ALL; - else - snoop = (u32) ~(PCIE_NO_SNOOP_ALL); - e1000e_set_pcie_no_snoop(hw, snoop); - - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - ew32(CTRL_EXT, ctrl_ext); - - /* - * Clear all of the statistics registers (clear on read). It is - * important that we do this after we have tried to establish link - * because the symbol error count will increment wildly if there - * is no link. - */ - e1000_clear_hw_cntrs_ich8lan(hw); - - return 0; -} -/** - * e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits - * @hw: pointer to the HW structure - * - * Sets/Clears required hardware bits necessary for correctly setting up the - * hardware for transmit and receive. - **/ -static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) -{ - u32 reg; - - /* Extended Device Control */ - reg = er32(CTRL_EXT); - reg |= (1 << 22); - /* Enable PHY low-power state when MAC is at D3 w/o WoL */ - if (hw->mac.type >= e1000_pchlan) - reg |= E1000_CTRL_EXT_PHYPDEN; - ew32(CTRL_EXT, reg); - - /* Transmit Descriptor Control 0 */ - reg = er32(TXDCTL(0)); - reg |= (1 << 22); - ew32(TXDCTL(0), reg); - - /* Transmit Descriptor Control 1 */ - reg = er32(TXDCTL(1)); - reg |= (1 << 22); - ew32(TXDCTL(1), reg); - - /* Transmit Arbitration Control 0 */ - reg = er32(TARC(0)); - if (hw->mac.type == e1000_ich8lan) - reg |= (1 << 28) | (1 << 29); - reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27); - ew32(TARC(0), reg); - - /* Transmit Arbitration Control 1 */ - reg = er32(TARC(1)); - if (er32(TCTL) & E1000_TCTL_MULR) - reg &= ~(1 << 28); - else - reg |= (1 << 28); - reg |= (1 << 24) | (1 << 26) | (1 << 30); - ew32(TARC(1), reg); - - /* Device Status */ - if (hw->mac.type == e1000_ich8lan) { - reg = er32(STATUS); - reg &= ~(1 << 31); - ew32(STATUS, reg); - } - - /* - * work-around descriptor data corruption issue during nfs v2 udp - * traffic, just disable the nfs filtering capability - */ - reg = er32(RFCTL); - reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS); - ew32(RFCTL, reg); -} - -/** - * e1000_setup_link_ich8lan - Setup flow control and link settings - * @hw: pointer to the HW structure - * - * Determines which flow control settings to use, then configures flow - * control. Calls the appropriate media-specific link configuration - * function. Assuming the adapter has a valid link partner, a valid link - * should be established. Assumes the hardware has previously been reset - * and the transmitter and receiver are not enabled. - **/ -static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val; - - if (e1000_check_reset_block(hw)) - return 0; - - /* - * ICH parts do not have a word in the NVM to determine - * the default flow control setting, so we explicitly - * set it to full. - */ - if (hw->fc.requested_mode == e1000_fc_default) { - /* Workaround h/w hang when Tx flow control enabled */ - if (hw->mac.type == e1000_pchlan) - hw->fc.requested_mode = e1000_fc_rx_pause; - else - hw->fc.requested_mode = e1000_fc_full; - } - - /* - * Save off the requested flow control mode for use later. Depending - * on the link partner's capabilities, we may or may not use this mode. - */ - hw->fc.current_mode = hw->fc.requested_mode; - - e_dbg("After fix-ups FlowControl is now = %x\n", - hw->fc.current_mode); - - /* Continue to configure the copper link. */ - ret_val = e1000_setup_copper_link_ich8lan(hw); - if (ret_val) - return ret_val; - - ew32(FCTTV, hw->fc.pause_time); - if ((hw->phy.type == e1000_phy_82578) || - (hw->phy.type == e1000_phy_82579) || - (hw->phy.type == e1000_phy_82577)) { - ew32(FCRTV_PCH, hw->fc.refresh_time); - - ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27), - hw->fc.pause_time); - if (ret_val) - return ret_val; - } - - return e1000e_set_fc_watermarks(hw); -} - -/** - * e1000_setup_copper_link_ich8lan - Configure MAC/PHY interface - * @hw: pointer to the HW structure - * - * Configures the kumeran interface to the PHY to wait the appropriate time - * when polling the PHY, then call the generic setup_copper_link to finish - * configuring the copper link. - **/ -static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - u16 reg_data; - - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_SLU; - ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ew32(CTRL, ctrl); - - /* - * Set the mac to wait the maximum time between each iteration - * and increase the max iterations when polling the phy; - * this fixes erroneous timeouts at 10Mbps. - */ - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF); - if (ret_val) - return ret_val; - ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - ®_data); - if (ret_val) - return ret_val; - reg_data |= 0x3F; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - reg_data); - if (ret_val) - return ret_val; - - switch (hw->phy.type) { - case e1000_phy_igp_3: - ret_val = e1000e_copper_link_setup_igp(hw); - if (ret_val) - return ret_val; - break; - case e1000_phy_bm: - case e1000_phy_82578: - ret_val = e1000e_copper_link_setup_m88(hw); - if (ret_val) - return ret_val; - break; - case e1000_phy_82577: - case e1000_phy_82579: - ret_val = e1000_copper_link_setup_82577(hw); - if (ret_val) - return ret_val; - break; - case e1000_phy_ife: - ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, ®_data); - if (ret_val) - return ret_val; - - reg_data &= ~IFE_PMC_AUTO_MDIX; - - switch (hw->phy.mdix) { - case 1: - reg_data &= ~IFE_PMC_FORCE_MDIX; - break; - case 2: - reg_data |= IFE_PMC_FORCE_MDIX; - break; - case 0: - default: - reg_data |= IFE_PMC_AUTO_MDIX; - break; - } - ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data); - if (ret_val) - return ret_val; - break; - default: - break; - } - return e1000e_setup_copper_link(hw); -} - -/** - * e1000_get_link_up_info_ich8lan - Get current link speed and duplex - * @hw: pointer to the HW structure - * @speed: pointer to store current link speed - * @duplex: pointer to store the current link duplex - * - * Calls the generic get_speed_and_duplex to retrieve the current link - * information and then calls the Kumeran lock loss workaround for links at - * gigabit speeds. - **/ -static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, - u16 *duplex) -{ - s32 ret_val; - - ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex); - if (ret_val) - return ret_val; - - if ((hw->mac.type == e1000_ich8lan) && - (hw->phy.type == e1000_phy_igp_3) && - (*speed == SPEED_1000)) { - ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw); - } - - return ret_val; -} - -/** - * e1000_kmrn_lock_loss_workaround_ich8lan - Kumeran workaround - * @hw: pointer to the HW structure - * - * Work-around for 82566 Kumeran PCS lock loss: - * On link status change (i.e. PCI reset, speed change) and link is up and - * speed is gigabit- - * 0) if workaround is optionally disabled do nothing - * 1) wait 1ms for Kumeran link to come up - * 2) check Kumeran Diagnostic register PCS lock loss bit - * 3) if not set the link is locked (all is good), otherwise... - * 4) reset the PHY - * 5) repeat up to 10 times - * Note: this is only called for IGP3 copper when speed is 1gb. - **/ -static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) -{ - struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - u32 phy_ctrl; - s32 ret_val; - u16 i, data; - bool link; - - if (!dev_spec->kmrn_lock_loss_workaround_enabled) - return 0; - - /* - * Make sure link is up before proceeding. If not just return. - * Attempting this while link is negotiating fouled up link - * stability - */ - ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); - if (!link) - return 0; - - for (i = 0; i < 10; i++) { - /* read once to clear */ - ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data); - if (ret_val) - return ret_val; - /* and again to get new status */ - ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data); - if (ret_val) - return ret_val; - - /* check for PCS lock */ - if (!(data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS)) - return 0; - - /* Issue PHY reset */ - e1000_phy_hw_reset(hw); - mdelay(5); - } - /* Disable GigE link negotiation */ - phy_ctrl = er32(PHY_CTRL); - phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE | - E1000_PHY_CTRL_NOND0A_GBE_DISABLE); - ew32(PHY_CTRL, phy_ctrl); - - /* - * Call gig speed drop workaround on Gig disable before accessing - * any PHY registers - */ - e1000e_gig_downshift_workaround_ich8lan(hw); - - /* unable to acquire PCS lock */ - return -E1000_ERR_PHY; -} - -/** - * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state - * @hw: pointer to the HW structure - * @state: boolean value used to set the current Kumeran workaround state - * - * If ICH8, set the current Kumeran workaround state (enabled - true - * /disabled - false). - **/ -void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, - bool state) -{ - struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - - if (hw->mac.type != e1000_ich8lan) { - e_dbg("Workaround applies to ICH8 only.\n"); - return; - } - - dev_spec->kmrn_lock_loss_workaround_enabled = state; -} - -/** - * e1000_ipg3_phy_powerdown_workaround_ich8lan - Power down workaround on D3 - * @hw: pointer to the HW structure - * - * Workaround for 82566 power-down on D3 entry: - * 1) disable gigabit link - * 2) write VR power-down enable - * 3) read it back - * Continue if successful, else issue LCD reset and repeat - **/ -void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) -{ - u32 reg; - u16 data; - u8 retry = 0; - - if (hw->phy.type != e1000_phy_igp_3) - return; - - /* Try the workaround twice (if needed) */ - do { - /* Disable link */ - reg = er32(PHY_CTRL); - reg |= (E1000_PHY_CTRL_GBE_DISABLE | - E1000_PHY_CTRL_NOND0A_GBE_DISABLE); - ew32(PHY_CTRL, reg); - - /* - * Call gig speed drop workaround on Gig disable before - * accessing any PHY registers - */ - if (hw->mac.type == e1000_ich8lan) - e1000e_gig_downshift_workaround_ich8lan(hw); - - /* Write VR power-down enable */ - e1e_rphy(hw, IGP3_VR_CTRL, &data); - data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK; - e1e_wphy(hw, IGP3_VR_CTRL, data | IGP3_VR_CTRL_MODE_SHUTDOWN); - - /* Read it back and test */ - e1e_rphy(hw, IGP3_VR_CTRL, &data); - data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK; - if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry) - break; - - /* Issue PHY reset and repeat at most one more time */ - reg = er32(CTRL); - ew32(CTRL, reg | E1000_CTRL_PHY_RST); - retry++; - } while (retry); -} - -/** - * e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working - * @hw: pointer to the HW structure - * - * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC), - * LPLU, Gig disable, MDIC PHY reset): - * 1) Set Kumeran Near-end loopback - * 2) Clear Kumeran Near-end loopback - * Should only be called for ICH8[m] devices with IGP_3 Phy. - **/ -void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val; - u16 reg_data; - - if ((hw->mac.type != e1000_ich8lan) || - (hw->phy.type != e1000_phy_igp_3)) - return; - - ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - ®_data); - if (ret_val) - return; - reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - reg_data); - if (ret_val) - return; - reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - reg_data); -} - -/** - * e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx - * @hw: pointer to the HW structure - * - * During S0 to Sx transition, it is possible the link remains at gig - * instead of negotiating to a lower speed. Before going to Sx, set - * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation - * to a lower speed. For PCH and newer parts, the OEM bits PHY register - * (LED, GbE disable and LPLU configurations) also needs to be written. - **/ -void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) -{ - u32 phy_ctrl; - s32 ret_val; - - phy_ctrl = er32(PHY_CTRL); - phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE; - ew32(PHY_CTRL, phy_ctrl); - - if (hw->mac.type >= e1000_pchlan) { - e1000_oem_bits_config_ich8lan(hw, false); - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return; - e1000_write_smbus_addr(hw); - hw->phy.ops.release(hw); - } -} - -/** - * e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0 - * @hw: pointer to the HW structure - * - * During Sx to S0 transitions on non-managed devices or managed devices - * on which PHY resets are not blocked, if the PHY registers cannot be - * accessed properly by the s/w toggle the LANPHYPC value to power cycle - * the PHY. - **/ -void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) -{ - u32 fwsm; - - if (hw->mac.type != e1000_pch2lan) - return; - - fwsm = er32(FWSM); - if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) { - u16 phy_id1, phy_id2; - s32 ret_val; - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) { - e_dbg("Failed to acquire PHY semaphore in resume\n"); - return; - } - - /* Test access to the PHY registers by reading the ID regs */ - ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1); - if (ret_val) - goto release; - ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2); - if (ret_val) - goto release; - - if (hw->phy.id == ((u32)(phy_id1 << 16) | - (u32)(phy_id2 & PHY_REVISION_MASK))) - goto release; - - e1000_toggle_lanphypc_value_ich8lan(hw); - - hw->phy.ops.release(hw); - msleep(50); - e1000_phy_hw_reset(hw); - msleep(50); - return; - } - -release: - hw->phy.ops.release(hw); - - return; -} - -/** - * e1000_cleanup_led_ich8lan - Restore the default LED operation - * @hw: pointer to the HW structure - * - * Return the LED back to the default configuration. - **/ -static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw) -{ - if (hw->phy.type == e1000_phy_ife) - return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); - - ew32(LEDCTL, hw->mac.ledctl_default); - return 0; -} - -/** - * e1000_led_on_ich8lan - Turn LEDs on - * @hw: pointer to the HW structure - * - * Turn on the LEDs. - **/ -static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) -{ - if (hw->phy.type == e1000_phy_ife) - return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, - (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON)); - - ew32(LEDCTL, hw->mac.ledctl_mode2); - return 0; -} - -/** - * e1000_led_off_ich8lan - Turn LEDs off - * @hw: pointer to the HW structure - * - * Turn off the LEDs. - **/ -static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) -{ - if (hw->phy.type == e1000_phy_ife) - return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, - (IFE_PSCL_PROBE_MODE | - IFE_PSCL_PROBE_LEDS_OFF)); - - ew32(LEDCTL, hw->mac.ledctl_mode1); - return 0; -} - -/** - * e1000_setup_led_pchlan - Configures SW controllable LED - * @hw: pointer to the HW structure - * - * This prepares the SW controllable LED for use. - **/ -static s32 e1000_setup_led_pchlan(struct e1000_hw *hw) -{ - return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1); -} - -/** - * e1000_cleanup_led_pchlan - Restore the default LED operation - * @hw: pointer to the HW structure - * - * Return the LED back to the default configuration. - **/ -static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw) -{ - return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default); -} - -/** - * e1000_led_on_pchlan - Turn LEDs on - * @hw: pointer to the HW structure - * - * Turn on the LEDs. - **/ -static s32 e1000_led_on_pchlan(struct e1000_hw *hw) -{ - u16 data = (u16)hw->mac.ledctl_mode2; - u32 i, led; - - /* - * If no link, then turn LED on by setting the invert bit - * for each LED that's mode is "link_up" in ledctl_mode2. - */ - if (!(er32(STATUS) & E1000_STATUS_LU)) { - for (i = 0; i < 3; i++) { - led = (data >> (i * 5)) & E1000_PHY_LED0_MASK; - if ((led & E1000_PHY_LED0_MODE_MASK) != - E1000_LEDCTL_MODE_LINK_UP) - continue; - if (led & E1000_PHY_LED0_IVRT) - data &= ~(E1000_PHY_LED0_IVRT << (i * 5)); - else - data |= (E1000_PHY_LED0_IVRT << (i * 5)); - } - } - - return e1e_wphy(hw, HV_LED_CONFIG, data); -} - -/** - * e1000_led_off_pchlan - Turn LEDs off - * @hw: pointer to the HW structure - * - * Turn off the LEDs. - **/ -static s32 e1000_led_off_pchlan(struct e1000_hw *hw) -{ - u16 data = (u16)hw->mac.ledctl_mode1; - u32 i, led; - - /* - * If no link, then turn LED off by clearing the invert bit - * for each LED that's mode is "link_up" in ledctl_mode1. - */ - if (!(er32(STATUS) & E1000_STATUS_LU)) { - for (i = 0; i < 3; i++) { - led = (data >> (i * 5)) & E1000_PHY_LED0_MASK; - if ((led & E1000_PHY_LED0_MODE_MASK) != - E1000_LEDCTL_MODE_LINK_UP) - continue; - if (led & E1000_PHY_LED0_IVRT) - data &= ~(E1000_PHY_LED0_IVRT << (i * 5)); - else - data |= (E1000_PHY_LED0_IVRT << (i * 5)); - } - } - - return e1e_wphy(hw, HV_LED_CONFIG, data); -} - -/** - * e1000_get_cfg_done_ich8lan - Read config done bit after Full or PHY reset - * @hw: pointer to the HW structure - * - * Read appropriate register for the config done bit for completion status - * and configure the PHY through s/w for EEPROM-less parts. - * - * NOTE: some silicon which is EEPROM-less will fail trying to read the - * config done bit, so only an error is logged and continues. If we were - * to return with error, EEPROM-less silicon would not be able to be reset - * or change link. - **/ -static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) -{ - s32 ret_val = 0; - u32 bank = 0; - u32 status; - - e1000e_get_cfg_done(hw); - - /* Wait for indication from h/w that it has completed basic config */ - if (hw->mac.type >= e1000_ich10lan) { - e1000_lan_init_done_ich8lan(hw); - } else { - ret_val = e1000e_get_auto_rd_done(hw); - if (ret_val) { - /* - * When auto config read does not complete, do not - * return with an error. This can happen in situations - * where there is no eeprom and prevents getting link. - */ - e_dbg("Auto Read Done did not complete\n"); - ret_val = 0; - } - } - - /* Clear PHY Reset Asserted bit */ - status = er32(STATUS); - if (status & E1000_STATUS_PHYRA) - ew32(STATUS, status & ~E1000_STATUS_PHYRA); - else - e_dbg("PHY Reset Asserted not set - needs delay\n"); - - /* If EEPROM is not marked present, init the IGP 3 PHY manually */ - if (hw->mac.type <= e1000_ich9lan) { - if (((er32(EECD) & E1000_EECD_PRES) == 0) && - (hw->phy.type == e1000_phy_igp_3)) { - e1000e_phy_init_script_igp3(hw); - } - } else { - if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) { - /* Maybe we should do a basic PHY config */ - e_dbg("EEPROM not present\n"); - ret_val = -E1000_ERR_CONFIG; - } - } - - return ret_val; -} - -/** - * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down - * @hw: pointer to the HW structure - * - * In the case of a PHY power down to save power, or to turn off link during a - * driver unload, or wake on lan is not enabled, remove the link. - **/ -static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw) -{ - /* If the management interface is not enabled, then power down */ - if (!(hw->mac.ops.check_mng_mode(hw) || - hw->phy.ops.check_reset_block(hw))) - e1000_power_down_phy_copper(hw); -} - -/** - * e1000_clear_hw_cntrs_ich8lan - Clear statistical counters - * @hw: pointer to the HW structure - * - * Clears hardware counters specific to the silicon family and calls - * clear_hw_cntrs_generic to clear all general purpose counters. - **/ -static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) -{ - u16 phy_data; - s32 ret_val; - - e1000e_clear_hw_cntrs_base(hw); - - er32(ALGNERRC); - er32(RXERRC); - er32(TNCRS); - er32(CEXTERR); - er32(TSCTC); - er32(TSCTFC); - - er32(MGTPRC); - er32(MGTPDC); - er32(MGTPTC); - - er32(IAC); - er32(ICRXOC); - - /* Clear PHY statistics registers */ - if ((hw->phy.type == e1000_phy_82578) || - (hw->phy.type == e1000_phy_82579) || - (hw->phy.type == e1000_phy_82577)) { - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return; - ret_val = hw->phy.ops.set_page(hw, - HV_STATS_PAGE << IGP_PAGE_SHIFT); - if (ret_val) - goto release; - hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data); - hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data); -release: - hw->phy.ops.release(hw); - } -} - -static struct e1000_mac_operations ich8_mac_ops = { - .id_led_init = e1000e_id_led_init, - /* check_mng_mode dependent on mac type */ - .check_for_link = e1000_check_for_copper_link_ich8lan, - /* cleanup_led dependent on mac type */ - .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan, - .get_bus_info = e1000_get_bus_info_ich8lan, - .set_lan_id = e1000_set_lan_id_single_port, - .get_link_up_info = e1000_get_link_up_info_ich8lan, - /* led_on dependent on mac type */ - /* led_off dependent on mac type */ - .update_mc_addr_list = e1000e_update_mc_addr_list_generic, - .reset_hw = e1000_reset_hw_ich8lan, - .init_hw = e1000_init_hw_ich8lan, - .setup_link = e1000_setup_link_ich8lan, - .setup_physical_interface= e1000_setup_copper_link_ich8lan, - /* id_led_init dependent on mac type */ -}; - -static struct e1000_phy_operations ich8_phy_ops = { - .acquire = e1000_acquire_swflag_ich8lan, - .check_reset_block = e1000_check_reset_block_ich8lan, - .commit = NULL, - .get_cfg_done = e1000_get_cfg_done_ich8lan, - .get_cable_length = e1000e_get_cable_length_igp_2, - .read_reg = e1000e_read_phy_reg_igp, - .release = e1000_release_swflag_ich8lan, - .reset = e1000_phy_hw_reset_ich8lan, - .set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan, - .set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan, - .write_reg = e1000e_write_phy_reg_igp, -}; - -static struct e1000_nvm_operations ich8_nvm_ops = { - .acquire = e1000_acquire_nvm_ich8lan, - .read = e1000_read_nvm_ich8lan, - .release = e1000_release_nvm_ich8lan, - .update = e1000_update_nvm_checksum_ich8lan, - .valid_led_default = e1000_valid_led_default_ich8lan, - .validate = e1000_validate_nvm_checksum_ich8lan, - .write = e1000_write_nvm_ich8lan, -}; - -struct e1000_info e1000_ich8_info = { - .mac = e1000_ich8lan, - .flags = FLAG_HAS_WOL - | FLAG_IS_ICH - | FLAG_RX_CSUM_ENABLED - | FLAG_HAS_CTRLEXT_ON_LOAD - | FLAG_HAS_AMT - | FLAG_HAS_FLASH - | FLAG_APME_IN_WUC, - .pba = 8, - .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, - .get_variants = e1000_get_variants_ich8lan, - .mac_ops = &ich8_mac_ops, - .phy_ops = &ich8_phy_ops, - .nvm_ops = &ich8_nvm_ops, -}; - -struct e1000_info e1000_ich9_info = { - .mac = e1000_ich9lan, - .flags = FLAG_HAS_JUMBO_FRAMES - | FLAG_IS_ICH - | FLAG_HAS_WOL - | FLAG_RX_CSUM_ENABLED - | FLAG_HAS_CTRLEXT_ON_LOAD - | FLAG_HAS_AMT - | FLAG_HAS_ERT - | FLAG_HAS_FLASH - | FLAG_APME_IN_WUC, - .pba = 10, - .max_hw_frame_size = DEFAULT_JUMBO, - .get_variants = e1000_get_variants_ich8lan, - .mac_ops = &ich8_mac_ops, - .phy_ops = &ich8_phy_ops, - .nvm_ops = &ich8_nvm_ops, -}; - -struct e1000_info e1000_ich10_info = { - .mac = e1000_ich10lan, - .flags = FLAG_HAS_JUMBO_FRAMES - | FLAG_IS_ICH - | FLAG_HAS_WOL - | FLAG_RX_CSUM_ENABLED - | FLAG_HAS_CTRLEXT_ON_LOAD - | FLAG_HAS_AMT - | FLAG_HAS_ERT - | FLAG_HAS_FLASH - | FLAG_APME_IN_WUC, - .pba = 10, - .max_hw_frame_size = DEFAULT_JUMBO, - .get_variants = e1000_get_variants_ich8lan, - .mac_ops = &ich8_mac_ops, - .phy_ops = &ich8_phy_ops, - .nvm_ops = &ich8_nvm_ops, -}; - -struct e1000_info e1000_pch_info = { - .mac = e1000_pchlan, - .flags = FLAG_IS_ICH - | FLAG_HAS_WOL - | FLAG_RX_CSUM_ENABLED - | FLAG_HAS_CTRLEXT_ON_LOAD - | FLAG_HAS_AMT - | FLAG_HAS_FLASH - | FLAG_HAS_JUMBO_FRAMES - | FLAG_DISABLE_FC_PAUSE_TIME /* errata */ - | FLAG_APME_IN_WUC, - .flags2 = FLAG2_HAS_PHY_STATS, - .pba = 26, - .max_hw_frame_size = 4096, - .get_variants = e1000_get_variants_ich8lan, - .mac_ops = &ich8_mac_ops, - .phy_ops = &ich8_phy_ops, - .nvm_ops = &ich8_nvm_ops, -}; - -struct e1000_info e1000_pch2_info = { - .mac = e1000_pch2lan, - .flags = FLAG_IS_ICH - | FLAG_HAS_WOL - | FLAG_RX_CSUM_ENABLED - | FLAG_HAS_CTRLEXT_ON_LOAD - | FLAG_HAS_AMT - | FLAG_HAS_FLASH - | FLAG_HAS_JUMBO_FRAMES - | FLAG_APME_IN_WUC, - .flags2 = FLAG2_HAS_PHY_STATS - | FLAG2_HAS_EEE, - .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, - .get_variants = e1000_get_variants_ich8lan, - .mac_ops = &ich8_mac_ops, - .phy_ops = &ich8_phy_ops, - .nvm_ops = &ich8_nvm_ops, -}; -- cgit v1.2.3