From a26deec69fa4a1843f11f11e123b49ed0699ff00 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 18 Apr 2019 03:11:39 +0200 Subject: net: dsa: mv88e6xxx: Only reconfigure MAC when something changes phylink will call the mac_config() callback once per second when polling a PHY or a fixed link. The MAC driver is not supposed to reconfigure the MAC if nothing has changed. Make the mv88e6xxx driver look at the current configuration of the port, and return early if nothing has changed. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 65da6709a173..bfd5a7faef3b 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -553,11 +553,28 @@ int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, int link, int speed, int duplex, int pause, phy_interface_t mode) { + struct phylink_link_state state; int err; if (!chip->info->ops->port_set_link) return 0; + if (!chip->info->ops->port_link_state) + return 0; + + err = chip->info->ops->port_link_state(chip, port, &state); + if (err) + return err; + + /* Has anything actually changed? We don't expect the + * interface mode to change without one of the other + * parameters also changing + */ + if (state.link == link && + state.speed == speed && + state.duplex == duplex) + return 0; + /* Port's MAC control must not be changed unless the link is down */ err = chip->info->ops->port_set_link(chip, port, 0); if (err) -- cgit v1.2.3