From 27afe0d34e9121a3d61cc0af9b17c2542dadde24 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 16 Jan 2020 20:43:27 +0200 Subject: net: dsa: sja1105: Don't error out on disabled ports with no phy-mode The sja1105_parse_ports_node function was tested only on device trees where all ports were enabled. Fix this check so that the driver continues to probe only with the ports where status is not "disabled", as expected. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 1da5ac111499..bb91f3d17cf2 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -582,7 +582,7 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, struct device *dev = &priv->spidev->dev; struct device_node *child; - for_each_child_of_node(ports_node, child) { + for_each_available_child_of_node(ports_node, child) { struct device_node *phy_node; phy_interface_t phy_mode; u32 index; -- cgit v1.2.3 From 8f1880cbe8d0d49ebb7e9ae409b3b96676e5aa97 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 16 Jan 2020 12:55:48 -0800 Subject: net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec With the implementation of the system reset controller we lost a setting that is currently applied by the bootloader and which configures the IMP port for 2Gb/sec, the default is 1Gb/sec. This is needed given the number of ports and applications we expect to run so bring back that setting. Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index e43040c9f9ee..3e8635311d0d 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -68,7 +68,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) /* Force link status for IMP port */ reg = core_readl(priv, offset); - reg |= (MII_SW_OR | LINK_STS); + reg |= (MII_SW_OR | LINK_STS | GMII_SPEED_UP_2G); core_writel(priv, reg, offset); /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ -- cgit v1.2.3