From 5fc0f21246e50afdf318b5a3a941f7f4f57b8947 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 31 Oct 2019 15:54:05 -0700 Subject: net: dsa: bcm_sf2: Fix IMP setup for port different than 8 Since it became possible for the DSA core to use a CPU port different than 8, our bcm_sf2_imp_setup() function was broken because it assumes that registers are applicable to port 8. In particular, the port's MAC is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS bits if we are not configured for port 8. Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-) (limited to 'drivers/net/dsa/bcm_sf2.c') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 26509fa37a50..d44651ad520c 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -37,22 +37,11 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) unsigned int i; u32 reg, offset; - if (priv->type == BCM7445_DEVICE_ID) - offset = CORE_STS_OVERRIDE_IMP; - else - offset = CORE_STS_OVERRIDE_IMP2; - /* Enable the port memories */ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); reg &= ~P_TXQ_PSM_VDD(port); core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); - /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ - reg = core_readl(priv, CORE_IMP_CTL); - reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN); - reg &= ~(RX_DIS | TX_DIS); - core_writel(priv, reg, CORE_IMP_CTL); - /* Enable forwarding */ core_writel(priv, SW_FWDG_EN, CORE_SWMODE); @@ -71,10 +60,27 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) b53_brcm_hdr_setup(ds, port); - /* Force link status for IMP port */ - reg = core_readl(priv, offset); - reg |= (MII_SW_OR | LINK_STS); - core_writel(priv, reg, offset); + if (port == 8) { + if (priv->type == BCM7445_DEVICE_ID) + offset = CORE_STS_OVERRIDE_IMP; + else + offset = CORE_STS_OVERRIDE_IMP2; + + /* Force link status for IMP port */ + reg = core_readl(priv, offset); + reg |= (MII_SW_OR | LINK_STS); + core_writel(priv, reg, offset); + + /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ + reg = core_readl(priv, CORE_IMP_CTL); + reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN); + reg &= ~(RX_DIS | TX_DIS); + core_writel(priv, reg, CORE_IMP_CTL); + } else { + reg = core_readl(priv, CORE_G_PCTL_PORT(port)); + reg &= ~(RX_DIS | TX_DIS); + core_writel(priv, reg, CORE_G_PCTL_PORT(port)); + } } static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable) -- cgit v1.2.3 From e684000b8a2b1e14b9f8ebd72dfd998d44a864ca Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 2 Nov 2019 20:17:39 -0700 Subject: net: dsa: bcm_sf2: Fix driver removal With the DSA core doing the call to dsa_port_disable() we do not need to do that within the driver itself. This could cause an use after free since past dsa_unregister_switch() we should not be accessing any dsa_switch internal structures. Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/dsa/bcm_sf2.c') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index d44651ad520c..69fc13046ac7 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1215,10 +1215,10 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); priv->wol_ports_mask = 0; + /* Disable interrupts */ + bcm_sf2_intr_disable(priv); dsa_unregister_switch(priv->dev->ds); bcm_sf2_cfp_exit(priv->dev->ds); - /* Disable all ports and interrupts */ - bcm_sf2_sw_suspend(priv->dev->ds); bcm_sf2_mdio_unregister(priv); return 0; -- cgit v1.2.3