From f22a563b0a4c2a84b6ff8831306532b64c9c1747 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 29 May 2009 12:52:49 +0000 Subject: cxgb3: add support for the Aquantia 10G-BT phy Add support for the Aquantia AQ1002 10G-BaseT phy. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/Makefile | 2 +- drivers/net/cxgb3/aq100x.c | 355 +++++++++++++++++++++++++++++++++++++++++++++ drivers/net/cxgb3/common.h | 2 + drivers/net/cxgb3/t3_hw.c | 2 +- 4 files changed, 359 insertions(+), 2 deletions(-) create mode 100644 drivers/net/cxgb3/aq100x.c (limited to 'drivers/net/cxgb3') diff --git a/drivers/net/cxgb3/Makefile b/drivers/net/cxgb3/Makefile index 343467985321..29aff78c7820 100644 --- a/drivers/net/cxgb3/Makefile +++ b/drivers/net/cxgb3/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_CHELSIO_T3) += cxgb3.o cxgb3-objs := cxgb3_main.o ael1002.o vsc8211.o t3_hw.o mc5.o \ - xgmac.o sge.o l2t.o cxgb3_offload.o + xgmac.o sge.o l2t.o cxgb3_offload.o aq100x.o diff --git a/drivers/net/cxgb3/aq100x.c b/drivers/net/cxgb3/aq100x.c new file mode 100644 index 000000000000..c51e50d925d0 --- /dev/null +++ b/drivers/net/cxgb3/aq100x.c @@ -0,0 +1,355 @@ +/* + * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "common.h" +#include "regs.h" + +enum { + /* MDIO_DEV_PMA_PMD registers */ + AQ_LINK_STAT = 0xe800, + AQ_IMASK_PMA = 0xf000, + + /* MDIO_DEV_XGXS registers */ + AQ_XAUI_RX_CFG = 0xc400, + AQ_XAUI_TX_CFG = 0xe400, + + /* MDIO_DEV_ANEG registers */ + AQ_100M_CTRL = 0x0010, + AQ_10G_CTRL = 0x0020, + AQ_1G_CTRL = 0xc400, + AQ_ANEG_STAT = 0xc800, + + /* MDIO_DEV_VEND1 registers */ + AQ_FW_VERSION = 0x0020, + AQ_IFLAG_GLOBAL = 0xfc00, + AQ_IMASK_GLOBAL = 0xff00, +}; + +#define AQBIT(x) (1 << (x)) +#define IMASK_PMA AQBIT(0x2) +#define IMASK_GLOBAL AQBIT(0xf) +#define ADV_1G_FULL AQBIT(0xf) +#define ADV_1G_HALF AQBIT(0xe) +#define ADV_10G_FULL AQBIT(0xc) +#define AQ_RESET (AQBIT(0xe) | AQBIT(0xf)) +#define AQ_LOWPOWER AQBIT(0xb) + +static int aq100x_reset(struct cphy *phy, int wait) +{ + /* + * Ignore the caller specified wait time; always wait for the reset to + * complete. Can take up to 3s. + */ + int err = t3_phy_reset(phy, MDIO_MMD_VEND1, 3000); + + if (err) + CH_WARN(phy->adapter, "PHY%d: reset failed (0x%x).\n", + phy->mdio.prtad, err); + + return err; +} + +static int aq100x_intr_enable(struct cphy *phy) +{ + int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AQ_IMASK_PMA, IMASK_PMA); + if (err) + return err; + + err = t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, IMASK_GLOBAL); + return err; +} + +static int aq100x_intr_disable(struct cphy *phy) +{ + return t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, 0); +} + +static int aq100x_intr_clear(struct cphy *phy) +{ + unsigned int v; + + t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &v); + t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v); + + return 0; +} + +static int aq100x_intr_handler(struct cphy *phy) +{ + int err; + unsigned int cause, v; + + err = t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &cause); + if (err) + return err; + + /* Read (and reset) the latching version of the status */ + t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v); + + return cphy_cause_link_change; +} + +static int aq100x_power_down(struct cphy *phy, int off) +{ + return mdio_set_flag(&phy->mdio, phy->mdio.prtad, + MDIO_MMD_PMAPMD, MDIO_CTRL1, + MDIO_CTRL1_LPOWER, off); +} + +static int aq100x_autoneg_enable(struct cphy *phy) +{ + int err; + + err = aq100x_power_down(phy, 0); + if (!err) + err = mdio_set_flag(&phy->mdio, phy->mdio.prtad, + MDIO_MMD_AN, MDIO_CTRL1, + BMCR_ANENABLE | BMCR_ANRESTART, 1); + + return err; +} + +static int aq100x_autoneg_restart(struct cphy *phy) +{ + int err; + + err = aq100x_power_down(phy, 0); + if (!err) + err = mdio_set_flag(&phy->mdio, phy->mdio.prtad, + MDIO_MMD_AN, MDIO_CTRL1, + BMCR_ANENABLE | BMCR_ANRESTART, 1); + + return err; +} + +static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map) +{ + unsigned int adv; + int err; + + /* 10G advertisement */ + adv = 0; + if (advertise_map & ADVERTISED_10000baseT_Full) + adv |= ADV_10G_FULL; + err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_10G_CTRL, + ADV_10G_FULL, adv); + if (err) + return err; + + /* 1G advertisement */ + adv = 0; + if (advertise_map & ADVERTISED_1000baseT_Full) + adv |= ADV_1G_FULL; + if (advertise_map & ADVERTISED_1000baseT_Half) + adv |= ADV_1G_HALF; + err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_1G_CTRL, + ADV_1G_FULL | ADV_1G_HALF, adv); + if (err) + return err; + + /* 100M, pause advertisement */ + adv = 0; + if (advertise_map & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise_map & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + if (advertise_map & ADVERTISED_Pause) + adv |= ADVERTISE_PAUSE_CAP; + if (advertise_map & ADVERTISED_Asym_Pause) + adv |= ADVERTISE_PAUSE_ASYM; + err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_100M_CTRL, 0xfe0, adv); + + return err; +} + +static int aq100x_set_loopback(struct cphy *phy, int mmd, int dir, int enable) +{ + return mdio_set_flag(&phy->mdio, phy->mdio.prtad, + MDIO_MMD_PMAPMD, MDIO_CTRL1, + BMCR_LOOPBACK, enable); +} + +static int aq100x_set_speed_duplex(struct cphy *phy, int speed, int duplex) +{ + /* no can do */ + return -1; +} + +static int aq100x_get_link_status(struct cphy *phy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + int err; + unsigned int v; + + if (link_ok) { + err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AQ_LINK_STAT, &v); + if (err) + return err; + + *link_ok = v & 1; + if (!*link_ok) + return 0; + } + + err = t3_mdio_read(phy, MDIO_MMD_AN, AQ_ANEG_STAT, &v); + if (err) + return err; + + if (speed) { + switch (v & 0x6) { + case 0x6: + *speed = SPEED_10000; + break; + case 0x4: + *speed = SPEED_1000; + break; + case 0x2: + *speed = SPEED_100; + break; + case 0x0: + *speed = SPEED_10; + break; + } + } + + if (duplex) + *duplex = v & 1 ? DUPLEX_FULL : DUPLEX_HALF; + + return 0; +} + +static struct cphy_ops aq100x_ops = { + .reset = aq100x_reset, + .intr_enable = aq100x_intr_enable, + .intr_disable = aq100x_intr_disable, + .intr_clear = aq100x_intr_clear, + .intr_handler = aq100x_intr_handler, + .autoneg_enable = aq100x_autoneg_enable, + .autoneg_restart = aq100x_autoneg_restart, + .advertise = aq100x_advertise, + .set_loopback = aq100x_set_loopback, + .set_speed_duplex = aq100x_set_speed_duplex, + .get_link_status = aq100x_get_link_status, + .power_down = aq100x_power_down, + .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS, +}; + +int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, + const struct mdio_ops *mdio_ops) +{ + unsigned int v, v2, gpio, wait; + int err; + + cphy_init(phy, adapter, phy_addr, &aq100x_ops, mdio_ops, + SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_AUI, "1000/10GBASE-T"); + + /* + * The PHY has been out of reset ever since the system powered up. So + * we do a hard reset over here. + */ + gpio = phy_addr ? F_GPIO10_OUT_VAL : F_GPIO6_OUT_VAL; + t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, 0); + msleep(1); + t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, gpio); + + /* + * Give it enough time to load the firmware and get ready for mdio. + */ + msleep(1000); + wait = 500; /* in 10ms increments */ + do { + err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v); + if (err || v == 0xffff) { + + /* Allow prep_adapter to succeed when ffff is read */ + + CH_WARN(adapter, "PHY%d: reset failed (0x%x, 0x%x).\n", + phy_addr, err, v); + goto done; + } + + v &= AQ_RESET; + if (v) + msleep(10); + } while (v && --wait); + if (v) { + CH_WARN(adapter, "PHY%d: reset timed out (0x%x).\n", + phy_addr, v); + + goto done; /* let prep_adapter succeed */ + } + + /* Datasheet says 3s max but this has been observed */ + wait = (500 - wait) * 10 + 1000; + if (wait > 3000) + CH_WARN(adapter, "PHY%d: reset took %ums\n", phy_addr, wait); + + /* Firmware version check. */ + t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_FW_VERSION, &v); + if (v != 30) { + CH_WARN(adapter, "PHY%d: unsupported firmware %d\n", + phy_addr, v); + return 0; /* allow t3_prep_adapter to succeed */ + } + + /* + * The PHY should start in really-low-power mode. Prepare it for normal + * operations. + */ + err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v); + if (err) + return err; + if (v & AQ_LOWPOWER) { + err = t3_mdio_change_bits(phy, MDIO_MMD_VEND1, MDIO_CTRL1, + AQ_LOWPOWER, 0); + if (err) + return err; + msleep(10); + } else + CH_WARN(adapter, "PHY%d does not start in low power mode.\n", + phy_addr); + + /* + * Verify XAUI settings, but let prep succeed no matter what. + */ + v = v2 = 0; + t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_RX_CFG, &v); + t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_TX_CFG, &v2); + if (v != 0x1b || v2 != 0x1b) + CH_WARN(adapter, + "PHY%d: incorrect XAUI settings (0x%x, 0x%x).\n", + phy_addr, v, v2); + +done: + return err; +} diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h index 301221ac10eb..d21b705501a9 100644 --- a/drivers/net/cxgb3/common.h +++ b/drivers/net/cxgb3/common.h @@ -808,4 +808,6 @@ int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops); int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops); +int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *mdio_ops); #endif /* __CHELSIO_COMMON_H */ diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 766314c91d84..6a454476bb17 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -557,7 +557,7 @@ static const struct port_type_info port_types[] = { { t3_qt2045_phy_prep }, { t3_ael1006_phy_prep }, { NULL }, - { NULL }, + { t3_aq100x_phy_prep }, { t3_ael2020_phy_prep }, }; -- cgit v1.2.3