From ffd461f80d536336811d573f197f3e6d9872d054 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Sat, 21 Nov 2015 18:41:20 +0100 Subject: can: fix assignment of error location in CAN error messages As Dan Carpenter reported in http://marc.info/?l=linux-can&m=144793696016187 the assignment of the error location in CAN error messages had some bit wise overlaps. Indeed the value to be assigned in data[3] is no bitfield but defines a single value which points to a location inside the CAN frame on the wire. This patch fixes the assignments for the error locations in error messages. Reported-by: Dan Carpenter Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net/can/xilinx_can.c') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index fc55e8e0351d..4c57ddf12684 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -618,7 +618,7 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) stats->tx_errors++; if (skb) { cf->can_id |= CAN_ERR_ACK; - cf->data[3] |= CAN_ERR_PROT_LOC_ACK; + cf->data[3] = CAN_ERR_PROT_LOC_ACK; } } @@ -654,8 +654,7 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) stats->rx_errors++; if (skb) { cf->can_id |= CAN_ERR_PROT; - cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ | - CAN_ERR_PROT_LOC_CRC_DEL; + cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; } } priv->can.can_stats.bus_error++; -- cgit v1.2.3