From 40baec225765c54eefa870530dd613bad9829bb7 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 6 Nov 2015 17:23:23 -0800 Subject: bonding: fix panic on non-ARPHRD_ETHER enslave failure Since commit 7d5cd2ce529b, when bond_enslave fails on devices that are not ARPHRD_ETHER, if needed, it resets the bonding device back to ARPHRD_ETHER by calling ether_setup. Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP if the bond device is up, leaving it in a quasi-down state without having actually gone through dev_close. For bonding, if any periodic work queue items are active (miimon, arp_interval, etc), those will remain running, as they are stopped by bond_close. At this point, if the bonding module is unloaded or the bond is deleted, the system will panic when the work function is called. This panic is resolved by calling dev_close on the bond itself prior to calling ether_setup. Cc: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Fixes: 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/bonding') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b4351caf8e01..9e0f8a7ef8b1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1749,6 +1749,7 @@ err_undo_flags: slave_dev->dev_addr)) eth_hw_addr_random(bond_dev); if (bond_dev->type != ARPHRD_ETHER) { + dev_close(bond_dev); ether_setup(bond_dev); bond_dev->flags |= IFF_MASTER; bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING; -- cgit v1.2.3