From 10bfa766efa19c23f72f50727952a26cb1512256 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Thu, 13 Sep 2012 14:24:49 +0530 Subject: driver/mtd:IFC NAND:Initialise internal SRAM before any write IFC-1.1.0 uses 28nm techenology for SRAM. This tech has known limitaion for SRAM i.e. "byte select" is not supported. Hence Read Modify Write is implemented in IFC for any "system side write" into sram buffer. Reading an uninitialized memory results in ECC Error from sram wrapper. Hence we must initialize/prefill SRAM buffer by any data before writing anything in SRAM from system side. To initialize SRAM user can use "READID" NAND command with read bytes equal to SRAM size. It will be a one time activity post boot. Signed-off-by: Prabhakar Kushwaha Acked-by: Artem Bityutskiy Signed-off-by: Kumar Gala --- drivers/mtd/nand/fsl_ifc_nand.c | 56 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 9602c1b7e27e..01e2f2e87d8c 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -31,6 +31,7 @@ #include #include +#define FSL_IFC_V1_1_0 0x01010000 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ #define IFC_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait @@ -773,13 +774,62 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd) return 0; } +static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) +{ + struct fsl_ifc_ctrl *ctrl = priv->ctrl; + struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + uint32_t csor = 0, csor_8k = 0, csor_ext = 0; + uint32_t cs = priv->bank; + + /* Save CSOR and CSOR_ext */ + csor = in_be32(&ifc->csor_cs[cs].csor); + csor_ext = in_be32(&ifc->csor_cs[cs].csor_ext); + + /* chage PageSize 8K and SpareSize 1K*/ + csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000; + out_be32(&ifc->csor_cs[cs].csor, csor_8k); + out_be32(&ifc->csor_cs[cs].csor_ext, 0x0000400); + + /* READID */ + out_be32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); + out_be32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT); + out_be32(&ifc->ifc_nand.row3, 0x0); + + out_be32(&ifc->ifc_nand.nand_fbcr, 0x0); + + /* Program ROW0/COL0 */ + out_be32(&ifc->ifc_nand.row0, 0x0); + out_be32(&ifc->ifc_nand.col0, 0x0); + + /* set the chip select for NAND Transaction */ + out_be32(&ifc->ifc_nand.nand_csel, cs << IFC_NAND_CSEL_SHIFT); + + /* start read seq */ + out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); + + /* wait for command complete flag or timeout */ + wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat, + IFC_TIMEOUT_MSECS * HZ/1000); + + if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) + printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n"); + + /* Restore CSOR and CSOR_ext */ + out_be32(&ifc->csor_cs[cs].csor, csor); + out_be32(&ifc->csor_cs[cs].csor_ext, csor_ext); +} + static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) { struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc_regs __iomem *ifc = ctrl->regs; struct nand_chip *chip = &priv->chip; struct nand_ecclayout *layout; - u32 csor; + u32 csor, ver; /* Fill in fsl_ifc_mtd structure */ priv->mtd.priv = chip; @@ -874,6 +924,10 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->ecc.mode = NAND_ECC_SOFT; } + ver = in_be32(&ifc->ifc_rev); + if (ver == FSL_IFC_V1_1_0) + fsl_ifc_sram_init(priv); + return 0; } -- cgit v1.2.3