From 7ebc8d56f407184a457dd5fc739cf39e423a25aa Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 2 Jan 2009 19:38:42 +0800 Subject: [ARM] pxa: move DMA registers definitions into 1. Driver code where pxa_request_dma() is called will most likely reference DMA registers as well, and it is really unnecessary to include pxa-regs.h just for this. Move the definitions into and make relevant drivers include it instead of . 2. Introduce DMAC_REGS_VIRT as the virtual address base for these DMA registers. This allows later processors to re-use the same IP while registers may start at different I/O address. Signed-off-by: Eric Miao --- drivers/mtd/nand/pxa3xx_nand.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index cc55cbc2b308..61b69cc40009 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -22,7 +22,6 @@ #include #include -#include #include #define CHIP_DELAY_TIMEOUT (2 * HZ/10) -- cgit v1.2.3 From b74d1969083a8869659ad2b23138fc8a5ca97c53 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 20 Jan 2009 10:31:55 +0800 Subject: [ARM] pxa: move pxa2xx chip selects definitions out of pxa-regs.h The definitions of PXA_CS_PHYS are really PXA2xx specific and should be moved out of pxa-regs.h. As an illustration, the PXA3xx static chip selects definitions are added into pxa3xx-regs.h. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/pxa-regs.h | 12 ------------ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 11 +++++++++++ arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 9 +++++++++ drivers/mtd/nand/cmx270_nand.c | 3 +-- drivers/pcmcia/pxa2xx_mainstone.c | 3 +-- drivers/pcmcia/pxa2xx_trizeps4.c | 3 +-- 6 files changed, 23 insertions(+), 18 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h index 044929aa0b48..7e1e33a41b81 100644 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -15,18 +15,6 @@ #include -/* - * PXA Chip selects - */ - -#define PXA_CS0_PHYS 0x00000000 -#define PXA_CS1_PHYS 0x04000000 -#define PXA_CS2_PHYS 0x08000000 -#define PXA_CS3_PHYS 0x0C000000 -#define PXA_CS4_PHYS 0x10000000 -#define PXA_CS5_PHYS 0x14000000 - - /* * Real Time Clock */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index 0b4ffd05a39a..2f834de5b748 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -16,6 +16,17 @@ #include +/* + * PXA Chip selects + */ + +#define PXA_CS0_PHYS 0x00000000 +#define PXA_CS1_PHYS 0x04000000 +#define PXA_CS2_PHYS 0x08000000 +#define PXA_CS3_PHYS 0x0C000000 +#define PXA_CS4_PHYS 0x10000000 +#define PXA_CS5_PHYS 0x14000000 + /* * Memory controller */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index 15b3b0be7f58..7d1a059b3d43 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -15,6 +15,15 @@ #include +/* + * Static Chip Selects + */ + +#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */ +#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */ +#define PXA3xx_CS2_PHYS (0x10000000) +#define PXA3xx_CS3_PHYS (0x14000000) + /* * Oscillator Configuration Register (OSCC) */ diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index fa129c09bca8..10081e656a6f 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -26,8 +26,7 @@ #include #include -#include -#include +#include #define GPIO_NAND_CS (11) #define GPIO_NAND_RB (89) diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index 877001db4916..1138551ba8f6 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c @@ -21,11 +21,10 @@ #include -#include #include #include -#include +#include #include #include "soc_common.h" diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c index 36c7a0b324d2..e0e5cb339b4a 100644 --- a/drivers/pcmcia/pxa2xx_trizeps4.c +++ b/drivers/pcmcia/pxa2xx_trizeps4.c @@ -22,8 +22,7 @@ #include #include -#include -#include +#include #include #include "soc_common.h" -- cgit v1.2.3 From e65fb0099fe4fe82d59ffe84f1e88a489218d7f9 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 16 Feb 2009 14:29:10 +0100 Subject: [ARM] MXC: remove _clk suffix from clock names The context makes it clear already that these are clocks, so there's no need for such a suffix. This patch only changes the clocks actually used in the tree. The remaining clocks are renamed in the subsequent architecture specific patches. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/clock.c | 4 ++-- arch/arm/mach-mx2/clock_imx27.c | 18 +++++++++--------- arch/arm/mach-mx3/clock.c | 14 +++++++------- arch/arm/plat-mxc/dma-mx1-mx2.c | 2 +- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/serial/imx.c | 2 +- drivers/w1/masters/mxc_w1.c | 2 +- 7 files changed, 22 insertions(+), 22 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c index 40a2274380a3..0d0f306851d0 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-mx1/clock.c @@ -462,7 +462,7 @@ static struct clk clko_clk = { }; static struct clk dma_clk = { - .name = "dma_clk", + .name = "dma", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -513,7 +513,7 @@ static struct clk gpt_clk = { }; static struct clk uart_clk = { - .name = "uart_clk", + .name = "uart", .parent = &perclk[0], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 7b2c1122d9ab..700a22f5ae88 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -685,7 +685,7 @@ static struct clk per_clk[] = { struct clk uart1_clk[] = { { - .name = "uart_clk", + .name = "uart", .id = 0, .parent = &per_clk[0], .secondary = &uart1_clk[1], @@ -702,7 +702,7 @@ struct clk uart1_clk[] = { struct clk uart2_clk[] = { { - .name = "uart_clk", + .name = "uart", .id = 1, .parent = &per_clk[0], .secondary = &uart2_clk[1], @@ -719,7 +719,7 @@ struct clk uart2_clk[] = { struct clk uart3_clk[] = { { - .name = "uart_clk", + .name = "uart", .id = 2, .parent = &per_clk[0], .secondary = &uart3_clk[1], @@ -736,7 +736,7 @@ struct clk uart3_clk[] = { struct clk uart4_clk[] = { { - .name = "uart_clk", + .name = "uart", .id = 3, .parent = &per_clk[0], .secondary = &uart4_clk[1], @@ -753,7 +753,7 @@ struct clk uart4_clk[] = { struct clk uart5_clk[] = { { - .name = "uart_clk", + .name = "uart", .id = 4, .parent = &per_clk[0], .secondary = &uart5_clk[1], @@ -770,7 +770,7 @@ struct clk uart5_clk[] = { struct clk uart6_clk[] = { { - .name = "uart_clk", + .name = "uart", .id = 5, .parent = &per_clk[0], .secondary = &uart6_clk[1], @@ -1110,7 +1110,7 @@ static struct clk ssi2_clk[] = { }; static struct clk nfc_clk = { - .name = "nfc_clk", + .name = "nfc", .parent = &cpu_clk, .get_rate = _clk_nfc_recalc, .enable = _clk_enable, @@ -1128,7 +1128,7 @@ static struct clk vpu_clk = { }; static struct clk dma_clk = { - .name = "dma_clk", + .name = "dma", .parent = &ahb_clk, .enable = _clk_dma_enable, .disable = _clk_dma_disable, @@ -1260,7 +1260,7 @@ static struct clk kpp_clk = { }; static struct clk owire_clk = { - .name = "owire_clk", + .name = "owire", .parent = &ipg_clk, .enable = _clk_enable, .enable_reg = CCM_PCCR0, diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 8b41facb391b..bc3a3beb9a66 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -593,7 +593,7 @@ static struct clk epit_clk[] = { }; static struct clk nfc_clk = { - .name = "nfc_clk", + .name = "nfc", .parent = &ahb_clk, .get_rate = _clk_nfc_get_rate, }; @@ -667,7 +667,7 @@ static struct clk csi_clk = { static struct clk uart_clk[] = { { - .name = "uart_clk", + .name = "uart", .id = 0, .parent = &perclk_clk, .enable = _clk_enable, @@ -675,7 +675,7 @@ static struct clk uart_clk[] = { .enable_shift = MXC_CCM_CGR0_UART1_OFFSET, .disable = _clk_disable,}, { - .name = "uart_clk", + .name = "uart", .id = 1, .parent = &perclk_clk, .enable = _clk_enable, @@ -683,7 +683,7 @@ static struct clk uart_clk[] = { .enable_shift = MXC_CCM_CGR0_UART2_OFFSET, .disable = _clk_disable,}, { - .name = "uart_clk", + .name = "uart", .id = 2, .parent = &perclk_clk, .enable = _clk_enable, @@ -691,7 +691,7 @@ static struct clk uart_clk[] = { .enable_shift = MXC_CCM_CGR1_UART3_OFFSET, .disable = _clk_disable,}, { - .name = "uart_clk", + .name = "uart", .id = 3, .parent = &perclk_clk, .enable = _clk_enable, @@ -699,7 +699,7 @@ static struct clk uart_clk[] = { .enable_shift = MXC_CCM_CGR1_UART4_OFFSET, .disable = _clk_disable,}, { - .name = "uart_clk", + .name = "uart", .id = 4, .parent = &perclk_clk, .enable = _clk_enable, @@ -736,7 +736,7 @@ static struct clk i2c_clk[] = { }; static struct clk owire_clk = { - .name = "owire_clk", + .name = "owire", .parent = &perclk_clk, .enable_reg = MXC_CCM_CGR1, .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET, diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index 2905ec758758..1d64287c3078 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -802,7 +802,7 @@ static int __init imx_dma_init(void) int ret = 0; int i; - dma_clk = clk_get(NULL, "dma_clk"); + dma_clk = clk_get(NULL, "dma"); clk_enable(dma_clk); /* reset DMA module */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 21fd4f1c4806..bad048aca89a 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -880,7 +880,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->read_buf = mxc_nand_read_buf; this->verify_buf = mxc_nand_verify_buf; - host->clk = clk_get(&pdev->dev, "nfc_clk"); + host->clk = clk_get(&pdev->dev, "nfc"); if (IS_ERR(host->clk)) goto eclk; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index a50954612b60..9f460b175c50 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1129,7 +1129,7 @@ static int serial_imx_probe(struct platform_device *pdev) sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; - sport->clk = clk_get(&pdev->dev, "uart_clk"); + sport->clk = clk_get(&pdev->dev, "uart"); if (IS_ERR(sport->clk)) { ret = PTR_ERR(sport->clk); goto unmap; diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index b9d74d0b353e..65244c02551b 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -116,7 +116,7 @@ static int __init mxc_w1_probe(struct platform_device *pdev) if (!mdev) return -ENOMEM; - mdev->clk = clk_get(&pdev->dev, "owire_clk"); + mdev->clk = clk_get(&pdev->dev, "owire"); if (!mdev->clk) { err = -ENODEV; goto failed_clk; -- cgit v1.2.3 From 997302259f386bca8fe1db67c50296ca426c438f Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 25 Mar 2009 10:21:35 +0000 Subject: [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h Signed-off-by: Russell King --- arch/arm/mach-omap2/board-ldp.c | 2 +- drivers/i2c/busses/i2c-acorn.c | 2 +- drivers/input/mouse/rpcmouse.c | 2 +- drivers/input/serio/rpckbd.c | 2 +- drivers/mtd/maps/integrator-flash.c | 2 +- drivers/mtd/maps/sa1100-flash.c | 2 +- drivers/net/arm/am79c961a.c | 2 +- drivers/pcmcia/sa1111_generic.c | 2 +- drivers/pcmcia/sa11xx_base.c | 2 +- drivers/serial/21285.c | 2 +- drivers/serial/clps711x.c | 2 +- drivers/serial/sa1100.c | 2 +- drivers/video/acornfb.c | 2 +- drivers/video/cyber2000fb.c | 2 +- drivers/video/sa1100fb.c | 2 +- 15 files changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 73e3fdb2d20a..c71580557c62 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -35,7 +36,6 @@ #include #include -#include #include #include diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 9aefb5e5864d..86796488ef4f 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -15,9 +15,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index 56c079ef5018..272deddc8db6 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c @@ -22,10 +22,10 @@ #include #include #include +#include #include #include -#include #include MODULE_AUTHOR("Vojtech Pavlik, Russell King"); diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c index 7f36edd34f8b..ed045c99f84b 100644 --- a/drivers/input/serio/rpckbd.c +++ b/drivers/input/serio/rpckbd.c @@ -33,10 +33,10 @@ #include #include #include +#include #include #include -#include #include #include diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index d2ec262666c7..c9681a339a59 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -38,7 +39,6 @@ #include #include -#include #include #ifdef CONFIG_ARCH_P720T diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 6f6a0f6dafd6..8f57b6f40aa2 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -19,7 +20,6 @@ #include #include -#include #include #include diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index c2d012fcc29b..4bc6901b3819 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -27,9 +27,9 @@ #include #include #include +#include #include -#include #include #define TX_BUFFERS 15 diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 6924d0ea8d32..401052a21ce8 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -11,12 +11,12 @@ #include #include #include +#include #include #include #include -#include #include #include "sa1111_generic.h" diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index 810ac492a8c9..e15d59f2d8a9 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -36,9 +36,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index f31c6698419c..cb6d85d7ff43 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -14,8 +14,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 459f3420a429..80e76426131d 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -38,9 +38,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index b24a25ea6bc5..94530f01521e 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -36,8 +36,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c index 61c3d3f40fd1..6995fe1e86d4 100644 --- a/drivers/video/acornfb.c +++ b/drivers/video/acornfb.c @@ -28,9 +28,9 @@ #include #include #include +#include #include -#include #include #include #include diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index 51b373657aa2..83c5cefc266c 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -46,8 +46,8 @@ #include #include #include +#include -#include #include #include diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 022d07abbf99..fad58cf9ef73 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -176,9 +176,9 @@ #include #include #include +#include #include -#include #include #include #include -- cgit v1.2.3