From da4bc4f2851e3c46076929a8c9a99ee3e076cf1f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 2 Dec 2016 15:59:23 +0200 Subject: mmc: sdhci: Factor out tuning helper functions Factor out some functions to tidy up the code in sdhci_execute_tuning. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 216 +++++++++++++++++++++++++++-------------------- 1 file changed, 124 insertions(+), 92 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b841d0a57af1..a6f8e164b3fd 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1952,6 +1952,122 @@ static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios) return 0; } +static void sdhci_start_tuning(struct sdhci_host *host) +{ + u16 ctrl; + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl |= SDHCI_CTRL_EXEC_TUNING; + if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND) + ctrl |= SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* + * As per the Host Controller spec v3.00, tuning command + * generates Buffer Read Ready interrupt, so enable that. + * + * Note: The spec clearly says that when tuning sequence + * is being performed, the controller does not generate + * interrupts other than Buffer Read Ready interrupt. But + * to make sure we don't hit a controller bug, we _only_ + * enable Buffer Read Ready interrupt here. + */ + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); +} + +static void sdhci_end_tuning(struct sdhci_host *host) +{ + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +} + +static void sdhci_reset_tuning(struct sdhci_host *host) +{ + u16 ctrl; + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl &= ~SDHCI_CTRL_TUNED_CLK; + ctrl &= ~SDHCI_CTRL_EXEC_TUNING; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); +} + +static void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode, + unsigned long flags) +{ + sdhci_reset_tuning(host); + + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + + sdhci_end_tuning(host); + + spin_unlock_irqrestore(&host->lock, flags); + mmc_abort_tuning(host->mmc, opcode); + spin_lock_irqsave(&host->lock, flags); +} + +/* + * We use sdhci_send_tuning() because mmc_send_tuning() is not a good fit. SDHCI + * tuning command does not have a data payload (or rather the hardware does it + * automatically) so mmc_send_tuning() will return -EIO. Also the tuning command + * interrupt setup is different to other commands and there is no timeout + * interrupt so special handling is needed. + */ +static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode, + unsigned long flags) +{ + struct mmc_host *mmc = host->mmc; + struct mmc_command cmd = {0}; + struct mmc_request mrq = {NULL}; + + cmd.opcode = opcode; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.mrq = &mrq; + + mrq.cmd = &cmd; + /* + * In response to CMD19, the card sends 64 bytes of tuning + * block to the Host Controller. So we set the block size + * to 64 here. + */ + if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) { + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128), + SDHCI_BLOCK_SIZE); + else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), + SDHCI_BLOCK_SIZE); + } else { + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), + SDHCI_BLOCK_SIZE); + } + + /* + * The tuning block is sent by the card to the host controller. + * So we set the TRNS_READ bit in the Transfer Mode register. + * This also takes care of setting DMA Enable and Multi Block + * Select in the same register to 0. + */ + sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE); + + sdhci_send_command(host, &cmd); + + host->cmd = NULL; + + sdhci_del_timer(host, &mrq); + + host->tuning_done = 0; + + spin_unlock_irqrestore(&host->lock, flags); + + /* Wait for Buffer Read Ready interrupt */ + wait_event_timeout(host->buf_ready_int, (host->tuning_done == 1), + msecs_to_jiffies(50)); + + spin_lock_irqsave(&host->lock, flags); +} + static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); @@ -2011,105 +2127,24 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) return err; } - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - ctrl |= SDHCI_CTRL_EXEC_TUNING; - if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND) - ctrl |= SDHCI_CTRL_TUNED_CLK; - sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - - /* - * As per the Host Controller spec v3.00, tuning command - * generates Buffer Read Ready interrupt, so enable that. - * - * Note: The spec clearly says that when tuning sequence - * is being performed, the controller does not generate - * interrupts other than Buffer Read Ready interrupt. But - * to make sure we don't hit a controller bug, we _only_ - * enable Buffer Read Ready interrupt here. - */ - sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); - sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); + sdhci_start_tuning(host); /* * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number * of loops reaches 40 times. */ do { - struct mmc_command cmd = {0}; - struct mmc_request mrq = {NULL}; - - cmd.opcode = opcode; - cmd.arg = 0; - cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; - cmd.retries = 0; - cmd.data = NULL; - cmd.mrq = &mrq; - cmd.error = 0; - if (tuning_loop_counter-- == 0) break; - mrq.cmd = &cmd; - - /* - * In response to CMD19, the card sends 64 bytes of tuning - * block to the Host Controller. So we set the block size - * to 64 here. - */ - if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) { - if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) - sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128), - SDHCI_BLOCK_SIZE); - else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) - sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), - SDHCI_BLOCK_SIZE); - } else { - sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), - SDHCI_BLOCK_SIZE); - } - - /* - * The tuning block is sent by the card to the host controller. - * So we set the TRNS_READ bit in the Transfer Mode register. - * This also takes care of setting DMA Enable and Multi Block - * Select in the same register to 0. - */ - sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE); - - sdhci_send_command(host, &cmd); - - host->cmd = NULL; - sdhci_del_timer(host, &mrq); - - spin_unlock_irqrestore(&host->lock, flags); - /* Wait for Buffer Read Ready interrupt */ - wait_event_timeout(host->buf_ready_int, - (host->tuning_done == 1), - msecs_to_jiffies(50)); - spin_lock_irqsave(&host->lock, flags); + sdhci_send_tuning(host, opcode, flags); if (!host->tuning_done) { pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n"); - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - ctrl &= ~SDHCI_CTRL_TUNED_CLK; - ctrl &= ~SDHCI_CTRL_EXEC_TUNING; - sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - - sdhci_do_reset(host, SDHCI_RESET_CMD); - sdhci_do_reset(host, SDHCI_RESET_DATA); - - sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); - sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); - - spin_unlock_irqrestore(&host->lock, flags); - mmc_abort_tuning(mmc, opcode); - spin_lock_irqsave(&host->lock, flags); - + sdhci_abort_tuning(host, opcode, flags); goto out; } - host->tuning_done = 0; - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); /* eMMC spec does not require a delay between tuning cycles */ @@ -2121,18 +2156,15 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) * The Host Driver has exhausted the maximum number of loops allowed, * so use fixed sampling frequency. */ - if (tuning_loop_counter < 0) { - ctrl &= ~SDHCI_CTRL_TUNED_CLK; - ctrl &= ~SDHCI_CTRL_EXEC_TUNING; - sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - } - if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) + if (tuning_loop_counter < 0) + sdhci_reset_tuning(host); + + if (tuning_loop_counter < 0 || !(ctrl & SDHCI_CTRL_TUNED_CLK)) pr_info(DRIVER_NAME ": Tuning procedure failed, falling back to fixed sampling clock\n"); out: host->mmc->retune_period = tuning_count; - sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); - sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + sdhci_end_tuning(host); out_unlock: spin_unlock_irqrestore(&host->lock, flags); return err; -- cgit v1.2.3