From ac2b21157a3104ad2daa21c65e6cc73604edba0b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Tue, 8 Aug 2017 10:48:15 +0530 Subject: mmc: host: omap_hsmmc: Add CMD23 capability to omap_hsmmc driver omap_hsmmc driver always relied on CMD12 to stop transmission. However if CMD12 is not issued at the correct timing, the card will indicate a out of range error. With certain cards in some of the DRA7 based boards, -EIO error is observed. By Adding CMD23 capability, the MMC core will send MMC_SET_BLOCK_COUNT command before MMC_READ_MULTIPLE_BLOCK/MMC_WRITE_MULTIPLE_BLOCK commands. commit a04e6bae9e6f12 ("mmc: core: check also R1 response for stop commands") exposed this bug in omap_hsmmc driver. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Ulf Hansson --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 04ff3c97a535..2ab4788d021f 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2086,7 +2086,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) mmc->max_seg_size = mmc->max_req_size; mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE; + MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE | MMC_CAP_CMD23; mmc->caps |= mmc_pdata(host)->caps; if (mmc->caps & MMC_CAP_8_BIT_DATA) -- cgit v1.2.3