From 934f1f48330ed695927a51fa068dc5d673f2da19 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 29 Jan 2015 16:00:04 +0100 Subject: mmc: pwrseq_simple: Extend to support more pins Many WLAN attached to a SDIO/MMC interface, needs more than one pin for their reset sequence. For example, is very common for chips to have two pins: one for reset and one for power enable. This patch adds support for more reset pins to the pwrseq_simple driver and instead hardcoding a fixed number, it uses the of_gpio_named_count() since the MMC power sequence is only built when CONFIG_OF is enabled. Signed-off-by: Javier Martinez Canillas Signed-off-by: Srinivas Kandagatla Signed-off-by: Ulf Hansson --- drivers/mmc/core/pwrseq_simple.c | 55 +++++++++++++++++++++++++++++----------- 1 file changed, 40 insertions(+), 15 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 0958c696137f..e53d3c7e059c 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -19,16 +20,26 @@ struct mmc_pwrseq_simple { struct mmc_pwrseq pwrseq; - struct gpio_desc *reset_gpio; + int nr_gpios; + struct gpio_desc *reset_gpios[0]; }; +static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, + int value) +{ + int i; + + for (i = 0; i < pwrseq->nr_gpios; i++) + if (!IS_ERR(pwrseq->reset_gpios[i])) + gpiod_set_value_cansleep(pwrseq->reset_gpios[i], value); +} + static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); - if (!IS_ERR(pwrseq->reset_gpio)) - gpiod_set_value_cansleep(pwrseq->reset_gpio, 1); + mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); } static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host) @@ -36,17 +47,18 @@ static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host) struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); - if (!IS_ERR(pwrseq->reset_gpio)) - gpiod_set_value_cansleep(pwrseq->reset_gpio, 0); + mmc_pwrseq_simple_set_gpios_value(pwrseq, 0); } static void mmc_pwrseq_simple_free(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); + int i; - if (!IS_ERR(pwrseq->reset_gpio)) - gpiod_put(pwrseq->reset_gpio); + for (i = 0; i < pwrseq->nr_gpios; i++) + if (!IS_ERR(pwrseq->reset_gpios[i])) + gpiod_put(pwrseq->reset_gpios[i]); kfree(pwrseq); host->pwrseq = NULL; @@ -62,20 +74,33 @@ static struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = { int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev) { struct mmc_pwrseq_simple *pwrseq; - int ret = 0; + int i, nr_gpios, ret = 0; - pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple), GFP_KERNEL); + nr_gpios = of_gpio_named_count(dev->of_node, "reset-gpios"); + if (nr_gpios < 0) + nr_gpios = 0; + + pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple) + nr_gpios * + sizeof(struct gpio_desc *), GFP_KERNEL); if (!pwrseq) return -ENOMEM; - pwrseq->reset_gpio = gpiod_get_index(dev, "reset", 0, GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpio) && - PTR_ERR(pwrseq->reset_gpio) != -ENOENT && - PTR_ERR(pwrseq->reset_gpio) != -ENOSYS) { - ret = PTR_ERR(pwrseq->reset_gpio); - goto free; + for (i = 0; i < nr_gpios; i++) { + pwrseq->reset_gpios[i] = gpiod_get_index(dev, "reset", i, + GPIOD_OUT_HIGH); + if (IS_ERR(pwrseq->reset_gpios[i]) && + PTR_ERR(pwrseq->reset_gpios[i]) != -ENOENT && + PTR_ERR(pwrseq->reset_gpios[i]) != -ENOSYS) { + ret = PTR_ERR(pwrseq->reset_gpios[i]); + + while (--i) + gpiod_put(pwrseq->reset_gpios[i]); + + goto free; + } } + pwrseq->nr_gpios = nr_gpios; pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops; host->pwrseq = &pwrseq->pwrseq; -- cgit v1.2.3