From 7a7eb3286b8e078d6f5de56a2e26a3bb248085eb Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 18 Sep 2012 23:10:24 +0000 Subject: mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ Upon completion of a MMC_WRITE_MULTIPLE_BLOCK command MMCIF issues an IRQ with the DTRANE bit set and often with one or several of CMD12 bits set. If those interrupts are not acknowledged, an additional interrupt can be produced and will be delivered later, possibly, when the transaction has already been completed. To prevent this from happening, CMD12 completion interrupt sources have to be cleared too upon reception of an DTRANE IRQ. Signed-off-by: Guennadi Liakhovetski Tested-by: Tetsuyuki Kobayashi Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mmcif.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 5d8142773fac..6df3dc3164f7 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1213,7 +1213,9 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id) sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE); sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE); } else if (state & INT_DTRANE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE); + sh_mmcif_writel(host->addr, MMCIF_CE_INT, + ~(INT_CMD12DRE | INT_CMD12RBE | + INT_CMD12CRE | INT_DTRANE)); sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE); } else if (state & INT_CMD12RBE) { sh_mmcif_writel(host->addr, MMCIF_CE_INT, -- cgit v1.2.3