From 52884f8f66c893e92a73787b5bef32b2ef52e1bc Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 20 Nov 2017 11:56:47 -0800 Subject: mmc: sdhci-msm: Optionally wait for signal level changes Not all instances of the SDCC core supports changing signal voltage and as such will not generate a power interrupt when the software attempts to change the voltage. This results in probing the eMMC on some devices to take over 2 minutes. Check that the SWITCHABLE_SIGNALING_VOLTAGE bit in MCI_GENERICS is set before waiting for the power interrupt. Cc: Sahitya Tummala Cc: Vijay Viswanath Fixes: c0309b3803fe ("mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr irq") Signed-off-by: Bjorn Andersson Tested-by: Luca Weiss Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-msm.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/mmc/host') diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 3fb7d2eec93f..c283291db705 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -29,6 +29,9 @@ #define CORE_VERSION_MAJOR_MASK (0xf << CORE_VERSION_MAJOR_SHIFT) #define CORE_VERSION_MINOR_MASK 0xff +#define CORE_MCI_GENERICS 0x70 +#define SWITCHABLE_SIGNALING_VOLTAGE BIT(29) + #define CORE_HC_MODE 0x78 #define HC_MODE_EN 0x1 #define CORE_POWER 0x0 @@ -1028,11 +1031,22 @@ static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); bool done = false; + u32 val; pr_debug("%s: %s: request %d curr_pwr_state %x curr_io_level %x\n", mmc_hostname(host->mmc), __func__, req_type, msm_host->curr_pwr_state, msm_host->curr_io_level); + /* + * The power interrupt will not be generated for signal voltage + * switches if SWITCHABLE_SIGNALING_VOLTAGE in MCI_GENERICS is not set. + */ + val = readl(msm_host->core_mem + CORE_MCI_GENERICS); + if ((req_type & REQ_IO_HIGH || req_type & REQ_IO_LOW) && + !(val & SWITCHABLE_SIGNALING_VOLTAGE)) { + return; + } + /* * The IRQ for request type IO High/LOW will be generated when - * there is a state change in 1.8V enable bit (bit 3) of -- cgit v1.2.3