From a3c76eb9d4a1e68a69dd880cf0bcb8a52418b993 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Tue, 11 Oct 2011 11:44:09 +0530 Subject: mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- drivers/mmc/host/wbsd.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/mmc/host/wbsd.c') diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index 62e5a4d171e1..64acd9ce141c 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -194,7 +194,7 @@ static void wbsd_reset(struct wbsd_host *host) { u8 setup; - printk(KERN_ERR "%s: Resetting chip\n", mmc_hostname(host->mmc)); + pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc)); /* * Soft reset of chip (SD/MMC part). @@ -721,7 +721,7 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data) * Any leftover data? */ if (count) { - printk(KERN_ERR "%s: Incomplete DMA transfer. " + pr_err("%s: Incomplete DMA transfer. " "%d bytes left.\n", mmc_hostname(host->mmc), count); @@ -803,7 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq) default: #ifdef CONFIG_MMC_DEBUG - printk(KERN_WARNING "%s: Data command %d is not " + pr_warning("%s: Data command %d is not " "supported by this controller.\n", mmc_hostname(host->mmc), cmd->opcode); #endif @@ -1029,7 +1029,7 @@ static void wbsd_tasklet_card(unsigned long param) host->flags &= ~WBSD_FCARD_PRESENT; if (host->mrq) { - printk(KERN_ERR "%s: Card removed during transfer!\n", + pr_err("%s: Card removed during transfer!\n", mmc_hostname(host->mmc)); wbsd_reset(host); @@ -1429,7 +1429,7 @@ free: free_dma(dma); err: - printk(KERN_WARNING DRIVER_NAME ": Unable to allocate DMA %d. " + pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. " "Falling back on FIFO.\n", dma); } @@ -1664,7 +1664,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, ret = wbsd_scan(host); if (ret) { if (pnp && (ret == -ENODEV)) { - printk(KERN_WARNING DRIVER_NAME + pr_warning(DRIVER_NAME ": Unable to confirm device presence. You may " "experience lock-ups.\n"); } else { @@ -1688,7 +1688,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, */ if (pnp) { if ((host->config != 0) && !wbsd_chip_validate(host)) { - printk(KERN_WARNING DRIVER_NAME + pr_warning(DRIVER_NAME ": PnP active but chip not configured! " "You probably have a buggy BIOS. " "Configuring chip manually.\n"); @@ -1720,7 +1720,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, mmc_add_host(mmc); - printk(KERN_INFO "%s: W83L51xD", mmc_hostname(mmc)); + pr_info("%s: W83L51xD", mmc_hostname(mmc)); if (host->chip_id != 0) printk(" id %x", (int)host->chip_id); printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); @@ -1909,7 +1909,7 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev) */ if (host->config != 0) { if (!wbsd_chip_validate(host)) { - printk(KERN_WARNING DRIVER_NAME + pr_warning(DRIVER_NAME ": PnP active but chip not configured! " "You probably have a buggy BIOS. " "Configuring chip manually.\n"); @@ -1973,9 +1973,9 @@ static int __init wbsd_drv_init(void) { int result; - printk(KERN_INFO DRIVER_NAME + pr_info(DRIVER_NAME ": Winbond W83L51xD SD/MMC card interface driver\n"); - printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); + pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); #ifdef CONFIG_PNP -- cgit v1.2.3