From a4924c71aa43d4f8a3f342b1f71788349472e684 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Wed, 11 Jan 2012 14:04:52 -0500 Subject: mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S Signed-off-by: Philip Rakity Signed-off-by: Chris Ball --- drivers/mmc/core/bus.c | 3 +- drivers/mmc/core/debugfs.c | 3 + drivers/mmc/core/mmc.c | 162 ++++++++++++++++++++++++++++++++++++++++++--- drivers/mmc/core/sd.c | 3 +- drivers/mmc/core/sdio.c | 4 +- 5 files changed, 163 insertions(+), 12 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index f8a228a61fd4..5d011a39dfff 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -303,10 +303,11 @@ int mmc_add_card(struct mmc_card *card) mmc_card_ddr_mode(card) ? "DDR " : "", type); } else { - printk(KERN_INFO "%s: new %s%s%s card at address %04x\n", + pr_info("%s: new %s%s%s%s card at address %04x\n", mmc_hostname(card->host), mmc_card_uhs(card) ? "ultra high speed " : (mmc_card_highspeed(card) ? "high speed " : ""), + (mmc_card_hs200(card) ? "HS200 " : ""), mmc_card_ddr_mode(card) ? "DDR " : "", type, card->rca); } diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 027615d3bf3e..9ab5b17d488a 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -135,6 +135,9 @@ static int mmc_ios_show(struct seq_file *s, void *data) case MMC_TIMING_UHS_DDR50: str = "sd uhs DDR50"; break; + case MMC_TIMING_MMC_HS200: + str = "mmc high-speed SDR200"; + break; default: str = "invalid"; break; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 67f346e0d105..59b9ba52e66a 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -286,6 +286,27 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) } card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { + case EXT_CSD_CARD_TYPE_SDR_ALL: + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V: + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V: + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52: + card->ext_csd.hs_max_dtr = 200000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200; + break; + case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL: + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V: + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V: + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52: + card->ext_csd.hs_max_dtr = 200000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V; + break; + case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL: + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V: + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V: + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52: + card->ext_csd.hs_max_dtr = 200000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V; + break; case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: card->ext_csd.hs_max_dtr = 52000000; @@ -699,6 +720,79 @@ static int mmc_select_powerclass(struct mmc_card *card, return err; } +/* + * Selects the desired buswidth and switch to the HS200 mode + * if bus width set without error + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + int idx, err = 0; + struct mmc_host *host; + static unsigned ext_csd_bits[] = { + EXT_CSD_BUS_WIDTH_4, + EXT_CSD_BUS_WIDTH_8, + }; + static unsigned bus_widths[] = { + MMC_BUS_WIDTH_4, + MMC_BUS_WIDTH_8, + }; + + BUG_ON(!card); + + host = card->host; + + if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V && + host->caps2 & MMC_CAP2_HS200_1_2V_SDR) + if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0)) + err = mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_180, 0); + + /* If fails try again during next card power cycle */ + if (err) + goto err; + + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0; + + /* + * Unlike SD, MMC cards dont have a configuration register to notify + * supported bus width. So bus test command should be run to identify + * the supported bus width or compare the ext csd values of current + * bus width and ext csd values of 1 bit mode read earlier. + */ + for (; idx >= 0; idx--) { + + /* + * Host is capable of 8bit transfer, then switch + * the device to work in 8bit transfer mode. If the + * mmc switch command returns error then switch to + * 4bit transfer mode. On success set the corresponding + * bus width on the host. + */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx], + card->ext_csd.generic_cmd6_time); + if (err) + continue; + + mmc_set_bus_width(card->host, bus_widths[idx]); + + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) + err = mmc_compare_ext_csds(card, bus_widths[idx]); + else + err = mmc_bus_test(card, bus_widths[idx]); + if (!err) + break; + } + + /* switch to HS200 mode if bus width set successfully */ + if (!err) + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, 2, 0); +err: + return err; +} + /* * Handle the detection and initialisation of a card. * @@ -905,11 +999,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, /* * Activate high speed (if supported) */ - if ((card->ext_csd.hs_max_dtr != 0) && - (host->caps & MMC_CAP_MMC_HIGHSPEED)) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 1, - card->ext_csd.generic_cmd6_time); + if (card->ext_csd.hs_max_dtr != 0) { + err = 0; + if (card->ext_csd.hs_max_dtr > 52000000 && + host->caps2 & MMC_CAP2_HS200) + err = mmc_select_hs200(card); + else if (host->caps & MMC_CAP_MMC_HIGHSPEED) + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, 1, 0); + if (err && err != -EBADMSG) goto free_card; @@ -918,8 +1016,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, mmc_hostname(card->host)); err = 0; } else { - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + if (card->ext_csd.hs_max_dtr > 52000000 && + host->caps2 & MMC_CAP2_HS200) { + mmc_card_set_hs200(card); + mmc_set_timing(card->host, + MMC_TIMING_MMC_HS200); + } else { + mmc_card_set_highspeed(card); + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + } } } @@ -944,7 +1049,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ max_dtr = (unsigned int)-1; - if (mmc_card_highspeed(card)) { + if (mmc_card_highspeed(card) || mmc_card_hs200(card)) { if (max_dtr > card->ext_csd.hs_max_dtr) max_dtr = card->ext_csd.hs_max_dtr; } else if (max_dtr > card->csd.max_dtr) { @@ -969,10 +1074,49 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, ddr = MMC_1_2V_DDR_MODE; } + /* + * Indicate HS200 SDR mode (if supported). + */ + if (mmc_card_hs200(card)) { + u32 ext_csd_bits; + u32 bus_width = card->host->ios.bus_width; + + /* + * For devices supporting HS200 mode, the bus width has + * to be set before executing the tuning function. If + * set before tuning, then device will respond with CRC + * errors for responses on CMD line. So for HS200 the + * sequence will be + * 1. set bus width 4bit / 8 bit (1 bit not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz <=200MHz and + * 4. execute tuning for HS200 + */ + if ((host->caps2 & MMC_CAP2_HS200) && + card->host->ops->execute_tuning) + err = card->host->ops->execute_tuning(card->host, + MMC_SEND_TUNING_BLOCK_HS200); + if (err) { + pr_warning("%s: tuning execution failed\n", + mmc_hostname(card->host)); + goto err; + } + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + err = mmc_select_powerclass(card, ext_csd_bits, ext_csd); + if (err) { + pr_err("%s: power class selection to bus width %d failed\n", + mmc_hostname(card->host), 1 << bus_width); + goto err; + } + } + /* * Activate wide bus and DDR (if supported). */ - if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && + if (!mmc_card_hs200(card) && + (card->csd.mmca_vsn >= CSD_SPEC_VER_3) && (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { static unsigned ext_csd_bits[][2] = { { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 }, diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 6f27d35081b8..c63ad03c29c7 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -661,7 +661,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) /* SPI mode doesn't define CMD19 */ if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) - err = card->host->ops->execute_tuning(card->host); + err = card->host->ops->execute_tuning(card->host, + MMC_SEND_TUNING_BLOCK); out: kfree(status); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index b77f770ce5d1..bd7bacc950dc 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -556,7 +557,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card) /* Initialize and start re-tuning timer */ if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) - err = card->host->ops->execute_tuning(card->host); + err = card->host->ops->execute_tuning(card->host, + MMC_SEND_TUNING_BLOCK); out: -- cgit v1.2.3