From 09247e110b2efce3a104e57e887c373e0a57a412 Mon Sep 17 00:00:00 2001 From: Christian Löhle Date: Wed, 12 May 2021 16:03:24 +0000 Subject: mmc: core: Allow UHS-I voltage switch for SDSC cards if supported While initializing an UHS-I SD card, the mmc core first tries to switch to 1.8V I/O voltage, before it continues to change the settings for the bus speed mode. However, the current behaviour in the mmc core is inconsistent and doesn't conform to the SD spec. More precisely, an SD card that supports UHS-I must set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register response. When switching to 1.8V I/O the mmc core correctly checks both of the bits, but only the SD_OCR_S18R bit when changing the settings for bus speed mode. Rather than actually fixing the code to confirm to the SD spec, let's deliberately deviate from it by requiring only the SD_OCR_S18R bit for both parts. This enables us to support UHS-I for SDSC cards (outside spec), which is actually being supported by some existing SDSC cards. Moreover, this fixes the inconsistent behaviour. Signed-off-by: Christian Loehle Link: https://lore.kernel.org/r/CWXP265MB26803AE79E0AD5ED083BF2A6C4529@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org [Ulf: Rewrote commit message and comments to clarify the changes] Signed-off-by: Ulf Hansson --- drivers/mmc/core/sd.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 781c1e24308c..4646b7a03db6 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -857,11 +857,13 @@ try_again: return err; /* - * In case CCS and S18A in the response is set, start Signal Voltage - * Switch procedure. SPI mode doesn't support CMD11. + * In case the S18A bit is set in the response, let's start the signal + * voltage switch procedure. SPI mode doesn't support CMD11. + * Note that, according to the spec, the S18A bit is not valid unless + * the CCS bit is set as well. We deliberately deviate from the spec in + * regards to this, which allows UHS-I to be supported for SDSC cards. */ - if (!mmc_host_is_spi(host) && rocr && - ((*rocr & 0x41000000) == 0x41000000)) { + if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) { err = mmc_set_uhs_voltage(host, pocr); if (err == -EAGAIN) { retries--; -- cgit v1.2.3